Shure orporated UR1HB Wireless Microphone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1046405
Application ID	Z1+MK3YFJL11sjTBY/yk/A==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	54.69kB (683687 bits)
Date Submitted	2008-12-18 00:00:00
Date Available	2008-12-18 00:00:00
Creation Date	2008-11-18 13:06:45
Producing Software	Adobe PDF Library 8.0
Document Lastmod	2008-11-18 13:07:21
Document Title	user manual
Document Creator	Adobe InDesign CS3 (5.0)

UR1H Bodypack Transmitter
Addendum
Specifications:
Features
The following specifications apply
•
High RF power (250 mW)
to the UR1H bodypack only.
•
Same audio performance as UR1
•
Operates with alkaline or lithium batteries
•
Rapid, two-way infrared (IR) data transmission
•
External DC power connection
•
Optional remote mount antenna
•
Belt clip
UR1H
Warning: The UR1H belt clip must be installed as shown to ensure
compliance with FCC RF exposure guidelines for safe use.
Safety Information
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment is in direct contact with the
body of the user under normal operating conditions. This transmitter must
not be co-located or operating in conjunction with any other antenna or
transmitter.
For body-worn operation, the UR1H has been tested and meets the
guidelines for safe use when used properly with the belt clip supplied or
designated by Shure for use with this product. For safe use, do not remove
or alter the position at the belt clip other than as instructed.
Frequency Range
Band
Range
H4, H4E
518-578 MHz
J5
578-608, 614-638 MHz
J5E
578-638 MHz
L3E, L3
638-698 MHz
Q5
740-814 MHz
R9
790-862 MHz
X1
944-952 MHz
UR1H Transmitter Audio Input
Connector:
4-Pin male mini connector (TA4M)
Input Configuration:
Unbalanced, active
Actual Impedance:
>1 MΩ
Maximum Input Level:
+10 dBu (sensitivity 0 dB) +20 dBu
(sensitivity –10 dB)
(1 kHz, 1% THD)
TA4M Connector
Pin Assignments:
RF Carrier Frequency Range
518-862 MHz, depending on region
RF Output Power
250 mW (24 dBm) across all tunable frequencies,
maximum variation of -1.5 dB
Power Requirements
Two 1.5V AA batteries or
9 - 20 VDC, Shure PS22 adaptor recommended
Plug size: 1.7 mm x 4.0 mm (.067 in. x .159 in)
NOTE: This equipment has been tested and found to comply
with the limits of a Class B digital device when used with PS22,
pursuant to Part 15 of the FCC Rules.
Current Drain: 350 mA maximum at the battery terminals with
3 VDC applied
Battery Life (Typical): 3 hours, with 1.5V AA alkaline batteries
7 to 9 hours, with AA lithium primary batteries
Overall Dimensions
UR1H: 98 mm L x 60 mm W x 17 mm D
(3.84 x 2.38 x 0.66 in.)
Pin 1: Ground
Pin 2: +5 VDC bias
Pin 3: Audio
Pin 4: Tied through active load (on main
board) to Ground
(On instrument adapter cable, Pin 4
floats)
REPLACEMENT PARTS AND ACCESSORIES
Furnished Accessories
Antenna, 518-578 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Antenna, 578-698 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Antenna, 740-865 MHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Threaded Locking Adaptor TA4F. . . . . . . . . . . . . . . . . . . . . . .
UA710
UA720
UA730
WA340
Optional Accessories
Bodypack Pouch (Black). . . . . . . . . . . . . . . . . . . . . . . . . . . . . WA580B
Bodypack Pouch (White). . . . . . . . . . . . . . . . . . . . . . . . . . . . . WA580W
AC to DC Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PS22
Antenna Accessories
Note: SMA to adaptor (UA910) is required to connect the following
antenna accessories:
Antenna, 944-952 MHz
UA740
Passive Directional Wideband Antenna
UA860SWB
(470-1100 MHz)
Net Weight
97 g (3.4 oz.) without batteries
2 ft. Coaxial Antenna Cable, BNC-BNC (RG58C/U)
UA802
6 ft. Coaxial Antenna Cable, BNC-BNC (RG58C/U)
UA806
UR1H Transmitter RF Output
25 ft. Coaxial Antenna Cable, BNC-BNC (RG8X/U)
UA825
UA850
Connector:
SMA
50 ft. Coaxial Antenna Cable, BNC-BNC (RG8X/U)
Actual Impedance:
50 Ω
100 ft. Coaxial Antenna Cable, BNC-BNC (RG213/U)
UA8100
Shell = Ground
Center = Signal
SMA to BNC Adaptor
UA910
Pin Assignments:
27A11915 (Rev. 2)
©2008 Shure Incorporated
Printed in U.S.A.
Certification
UR1H meets the essential requirements of the European R&TTE Directive 99/5/EC (ETSI EN 300 422 Parts 1 & 2. Note: 250 mW RF output power,
EN 300 454 Parts 1 & 2, EN 301 489 Parts 1 & 9) and is eligible to carry the CE marking.
Certified under FCC Parts 74 (FCC ID: DD4UR1HA, DD4UR1HB, DD4UR1HC, DD4UR1HF). Certified by IC in Canada under RSS-123 and RSS-102
(IC: 616A-UR1HA, 616A-UR1HB, 616A-UR1HC).
The “EU Declaration of Conformity” can be obtained from Shure Inc. or any of its European representatives. For contact information please visit
www.shure.com
LICENSING INFORMATION:
Licensing: A ministerial license to operate this equipment may be required in certain areas. Consult your national authority for possible requirements.
Changes or modifications not expressly approved by Shure Incorporated could void your authority to operate the equipment. Licensing of Shure wireless
microphone equipment is the user’s responsibility, and licensability depends on the user’s classification and application, and on the selected frequency.
Shure strongly urges the user to contact the appropriate telecommunications authority concerning proper licensing, and before choosing and ordering
frequencies.
Information to User
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•
Relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Note: EMC conformance testing is based on the use of supplied and recommended cable types. The use of other cable types may degrade EMC
performance
FCC and IC Radiation Exposure Statement for Mobile Devices (when used with the UA860SWB)
This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed
and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2008:11:18 13:07:21-06:00
Create Date                     : 2008:11:18 13:06:45-06:00
Metadata Date                   : 2008:11:18 13:07:21-06:00
Creator Tool                    : Adobe InDesign CS3 (5.0)
Format                          : application/pdf
Document ID                     : uuid:989a28e2-507c-45e5-b12e-52cc298e5623
Instance ID                     : uuid:16c27a9e-d582-4f14-8f63-9b53ce51a67a
Producer                        : Adobe PDF Library 8.0
Page Count                      : 2
Creator                         : Adobe InDesign CS3 (5.0)

EXIF Metadata provided by EXIF.tools