Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2905136 |
| Application ID | CIfP4kYFLxvFtLBUYlEgPA== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 127.26kB (1590784 bits) |
| Date Submitted | 2016-02-17 00:00:00 |
| Date Available | 2016-02-17 00:00:00 |
| Creation Date | 2016-01-05 11:00:36 |
| Producing Software | Adobe PDF Library 7.0 |
| Document Lastmod | 2016-01-05 11:24:28 |
| Document Title | Users Manual |
| Document Creator | Adobe InDesign CS2 (4.0) |
X50V5 Series Quick Guide【English】 A. Begin Installation E Front / Rear / Side View 2. I nstall the M.2 device into the M key slot and secure with the screw. For safety reasons, please ensure that the power cord is disconnected before opening the case. 12 01 4. I nstall the HDD or SSD & bracket in the chassis and tighten the HDD or SSD & bracket with four screws. emove the cover on the back of the X50V5 first, unscrew 1. R four screws of the stand mount and remove the stand. 02 13 03 Cover Screw 04 08 14 C. Memory Module Installation 16 09 15 E. Complete 10 17 This mainboard does only support 1.35V DDR3L memory modules. 11 05 Stand / Handle 06 nscrew 2. U 07 four screws of the back cover and remove it. 07 24 23 22 21 20 19 18 Unscrew 01 Stand / Handle 09 COM1 and COM2 Ports (Optional) 17 Microphone Jack 02 Microphone 10 VGA Port 18 HDMI Port 03 Webcam 11 Kensington® Lock Port 19 USB 3.0 Ports 04 LCD Display (Single Touch) 12 Power Button 20 LAN Port 05 Hard Disk Drive LED 13 Stylus Pen 21 USB 2.0 Ports 06 Power LED 14 SD Card Reader 22 DC In 07 Stereo Speakers 15 USB 2.0 Ports 23 RJ11 DIO Port for Cash Drawer (Optional) 08 Printer Port (Optional) 16 Headphone / Line-out Jack 24 COM3, COM4 over RJ45 (Optional) E Placing on the desk To place the machine on the desk and to carry it, do the following: Place the X50V5 on a flat surface such as a table (Picture 1), and pull the stand upwards to an angle of 30° (Picture 2). To carry or move your X50V5 fully extend the angle to 180° (Picture 3). 2. SO-DIMM slot ently insert the 3. G module into the slot in a 45-degree angle. efasten the stand and the back cover with eight screws. 2. R B. HDD or SSD Installation nscrew four screws of the bracket and remove it. 1. U 45-degree angle ount the HDD or SSD into the bracket with four screws. 2. M Stand / Handle arefully push down the memory module until it snaps into 4. C the locking mechanism. Screw X50V5 brings digital life for an easy touch experience.Experience the ease of managing your digital life with a few touches or the use of the stylus pen. The touch of your finger replaces the mouse and is all you need to interact with the X50V5. ・Touch and hold = right-click on the mouse 3. lign the notch of the 2. A memory module with the one of the memory slot. Back Cover Use DDR3L SO-DIMM E How to use the Touch Panel ・Touch = left-click on the mouse 1. ocate the SO-DIMM slot on the mainboard. 1. L HDMI DC-IN eplace the back cover. 1. R Latch onnect the Serial ATA and power cable to the HDD or SSD. 3. C Latch eplace the cover, complete. 3. R D. Component Installation s shown, unfasten the screw first. 1. A 180 30 Serial ATA and power cable E 4 Point Calibration (CD-ROM drive install) E Powering on the system Follow the steps (1~3) below to connect the AC adapter to the “DC-IN jack”. Press the “Power Button” to turn on the system. Run the screen calibration E VESA mounting it to the wall program and correct 4 point locations on screen with the panel. M.2 2280 M Key slot Touch and hold the center of the target. Repeat on four corners and the screen will adjust automatically. When the 4 points calibration completed, press “OK” to continue. Click Start / All Programs / eGalax Touch / Configure Utility Select [Tools] tab and click [4 Points Calibration] 75 x75 mm 100 x 100mm E Cleaning the screen Follow these guidelines for cleaning the outside and handling the screen of the computer: Turn off the system and disconnect all cables. Use a damp, or cleaning cloth, soft, lint-free cloth with gentle water only and gently wipe the screen surface. Note: The product’s colour and specifications may vary from the actually shipping product. If you are mounting your X50V5 to the wall, remove the cover on the back of the X50V5 first. Unscrew four screws of the stand mount and remove the stand. The VESA standard lets users mount it on to walls easily. Please refer to the user guide of the wall/arm mount kit you bought to install it. Note : The X50V5 can be mounted to a wall using a VESA compatible 75 x75 mm or 100 x 100mm wall/arm bracket. Touch Hold OK E Safety Information Read the following precautions before setting up a Shuttle X50V5. CAUTION Do not walk on the power cord or allow anything to rest on it. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Model: X50V5 FCC ID : S8C-X50V5 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) T HIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) T HIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Made in Taiwan Brand Name: Shuttle 53R-X50V53-H011
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Instance ID : uuid:11e553c2-b7ce-4377-b80f-d085eff30b9f Document ID : adobe:docid:indd:2581ae78-ad38-11e5-9a56-d45aa37e006b Rendition Class : proof:pdf Derived From Instance ID : 2581ae77-ad38-11e5-9a56-d45aa37e006b Derived From Document ID : adobe:docid:indd:2581ae75-ad38-11e5-9a56-d45aa37e006b Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 266.41, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00 Manifest Placed Y Resolution : 266.41, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Document ID : adobe:docid:photoshop:3d812a94-3317-11e4-8ab5-d695ddeac420, adobe:docid:photoshop:9cec6f3f-3335-11e4-9b24-d0a59c6c4026, adobe:docid:photoshop:9cec6f43-3335-11e4-9b24-d0a59c6c4026, adobe:docid:photoshop:0171abe5-3335-11e4-9b24-d0a59c6c4026, adobe:docid:photoshop:0171abe1-3335-11e4-9b24-d0a59c6c4026, adobe:docid:photoshop:fffc01de-ad10-11e5-92e2-b7edf2734e59, adobe:docid:photoshop:a8cd8df0-3333-11e4-9b24-d0a59c6c4026, adobe:docid:photoshop:652df52f-3312-11e4-8ab5-d695ddeac420, adobe:docid:photoshop:9a3638c1-3310-11e4-8ab5-d695ddeac420, adobe:docid:photoshop:de554654-332a-11e4-9b24-d0a59c6c4026, adobe:docid:photoshop:51e47105-332c-11e4-9b24-d0a59c6c4026, adobe:docid:photoshop:e4e3bfd8-ad13-11e5-92e2-b7edf2734e59, adobe:docid:photoshop:e4e3bfdc-ad13-11e5-92e2-b7edf2734e59, adobe:docid:photoshop:12735f44-ad0c-11e5-92e2-b7edf2734e59, adobe:docid:photoshop:245b96cd-3337-11e4-9b24-d0a59c6c4026, adobe:docid:photoshop:7dbbd398-332e-11e4-9b24-d0a59c6c4026 Create Date : 2016:01:05 11:00:36+08:00 Modify Date : 2016:01:05 11:24:28+08:00 Metadata Date : 2016:01:05 11:24:28+08:00 Creator Tool : Adobe InDesign CS2 (4.0) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 17371 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 7.0 Trapped : False Page Count : 1 Creator : Adobe InDesign CS2 (4.0)EXIF Metadata provided by EXIF.tools