Sick RFH620 RFID User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1128691
Application ID	mDG9x/rtUz0UepTclVUbIw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	39.86kB (498298 bits)
Date Submitted	2009-06-24 00:00:00
Date Available	2009-06-24 00:00:00
Creation Date	2009-06-23 17:38:26
Producing Software	MFPImgLib V1.0
Document Lastmod	0000-00-00 00:00:00
Document Title	User Manual
Document Creator	TOSHIBA e-STUDIO281c

Chapter 2
For your safety Operating Instructions
———-———-——_————_——.
Important
Radio Frequency RFH620 Interrogator
2.2 Intended use
The interrogator RFH620 is an iSO/IEC-15693 compatible transponder printer/reader unit
for the close—up range (operating range of up to 16 cm), e. g., in a conveyor system.
The intended use of the interrogator results from the followmg description of the function:
- The interrogator is installed in a holder in a reading station.
- The interrogator transfers the reading data via the host interface to a superordinate
host computer for further processing.
- The interrogator is configured/operated using the SOPAS—ET configuration software
that runs on a standard client PC provided by the customer. In this connection, commu-
nication takes place we R‘s-232 or Ethernet.
- The Interrogator controls (locally), e. g., switches in the conveyor system Via the digital
switching outputs.
Any warranty claims against SICK AG shall be deemed invalid in case changes are made to
the interrogator, e. g., opening the housing, this includes modifications during installation
and electrical installation or changes to the SICK software.
> The interrogator is only to be operated in ambient air temperature limit.
2.2.1 CE authorisation
The interrogator RFH620 fulfils the requirements of CE authorisation.
2.22 FCC authorisation
The interrogator RFH520 is in accordance with part 15 of FCC guidelines.
his device complies With Part I5 oi‘ the FCC'Rules. Operation is subject to the followmg two
onditions:
- This device may not cause harmful interference. and
- this device must accept any interference received, including interference that may cau
se undesired operation.
ny changes or modifications not expressly approved by the party responsible for compli-
nce could void the user's authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance With the instruction manual. may cause harmful interference to radio communications
Operation of this equipment in a residential area ls likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense
__________—__—_._.__——__————
© SiCK AG - Division Auto ident- Germany -All rights reserved 8013105/0000/200905'12

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Producer                        : MFPImgLib V1.0
Create Date                     : 2009:06:23 17:38:26+01:00
Creator                         : TOSHIBA e-STUDIO281c
Page Count                      : 1

EXIF Metadata provided by EXIF.tools