Siemens Medical Solutions Department MED EH and S WRC Hand RC for medical x-ray-systems User Manual WirelessRemControl ADD
Siemens Medical Solutions, Department MED EH&S; Hand RC for medical x-ray-systems WirelessRemControl ADD
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 628442 |
| Application ID | lr95Ma7hEmgbstr1p2ewxA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 18.87kB (235852 bits) |
| Date Submitted | 2006-02-14 00:00:00 |
| Date Available | 2006-02-14 00:00:00 |
| Creation Date | 1995-07-24 11:33:19 |
| Producing Software | Acrobat Distiller 6.0.1 (Windows) |
| Document Lastmod | 2005-11-24 15:37:51 |
| Document Title | WirelessRemControl_ADD.fm |
| Document Creator | FrameMaker 7.0 |
Addendum AXIOM Aristos FX Wireless Remote Control - Draft Important information The functions of the Wireless Remote Control are activated via an RF transmitter. The Wireless Remote Control shall be operated in close vicinity to the patient table only and with full visibility to the patient on the table. The batteries shall always be sufficiently charged. The Wireless Remote Control can interfere with life supporting devices. Caution Mechanical or personal damage hm_fdrad_sysmark_MovementInte rruptbyStop_u06 Emergency stop interrupts movements immediately ◆ Use remote control only when there is visual and accoustic contact with patient. ◆ In case of unintended movement press next emergency STOP button. Changes or modifications not expressly approved by the party responsible for compliance could void the user´s authority to operate the equipment. The Wireless Remote Control may be interfered with by other equipment, including portable and mobile RF communication equipment, even if such equipment meets the applicable emissions requirements. The Wireless Remote Control must emit electromagnetic energy in order to perform its intended function. Nearby electronic equipment may be affected. AXIOM Aristos FX AXB4-310.621.01.01.02 - Draft - 1 /8 Wireless Remote Control - Draft - Operation Display area Operation area Selection area Wireless Remote Control (example) The remote control is active in a range of appr. 5 m around the table/stand, where the receiver is mounted. If the remote control is in a wider range of the table, it may lose contact with the receiver and will then turn into an inactive mode. 2 /8 AXB4-310.621.01.01.02 - Draft - Addendum Wireless Remote Control - Draft Display area There are 3 LEDs showing the status of the remote control. Green LED on: Remote control is on and is in active mode. Green LED off: Remote control is inactive. – It is too far away from the table – The Aristos FX is switched off – The batteries are completely discharged – The remote control is in “sleep mode”. Press a button swiftly to activate it again. Orange LED on: An operation button is being pressed. LED off: battery sufficiently charged, remote control not connected to the Charging Station, LED flashing red: battery needs charging, remaining capacity < 4h. LED on red: remote control connected to Charging Station and batteries are being charged. LED on green: remote control connected to Charging Station and batteries are fully charged. This symbol marks an RF transmitting component. Selection area In the selection area you can select which part of the system you want to operate. The green LED on the selected button is on. Selection of tube unit Selection of detector Selection of patient table Selection of collimator AXIOM Aristos FX AXB4-310.621.01.01.02 - Draft - 3 /8 Wireless Remote Control - Draft Operation area Dead-man switch On the backside of the remote control there is a dead-man switch. To execute an operation with a button of the operation area you have to press the dead-man switch simultaneously. As soon as you release the dead-man switch, the current operation is stopped. Angular movement of tube unit and detector Angular movement of tube unit and detector counter-clockwise about the α-axis Angular movement the tube unit and detector clockwise about the α-axis Angular movement the tube unit and detector counter-clockwise about the β-axis Angular movement the tube unit and detector clockwise about the β-axis 4 /8 AXB4-310.621.01.01.02 - Draft - Addendum Wireless Remote Control - Draft Opening/closing the collimator; moving tube unit and detector in x and y direction (orange and green) Closing the collimator in transverse direction Moving tube unit and detector in x direction (orange) Opening the collimator in transverse direction Moving tube unit and detector in x direction (orange) Closing the collimator in longitudinal direction Moving tube unit and detector in y direction (green) Opening the collimator in longitudinal direction Moving tube unit and detector in y direction (green) OGP position of patient table or parking position Moving the patient table to OGP position; Moving the system in parking position Moving detector, tube unit and patient table Moving up and down detector, tube unit and patient table. AXIOM Aristos FX AXB4-310.621.01.01.02 - Draft - 5 /8 Wireless Remote Control - Draft ’Center lock’ tracking Disable/enable ’center lock’ tracking – Press the ’center lock’ tracking button just for a short time (< 3 s) to activate or deactivate center-lock tracking at the current position. When an OGP with centered tracking is selected press the tracking button longer than 3 s and keep it pressed (dead man switch). Detector and tube unit are then centered as programmed. – LED at tube support control panel lights up when tracking is active – LED at tube support control panel flashes when tracking is not possible or being in progress SID tracking Disable/enable SID tracking control – Press: The tracking control is switched off(on). – LED at tube support control panel lights up when tracking is active – LED at tube support control panel flashes when tracking is not possible or being in progress Parking position Switching over the function of the OGP button to parking position Marking signs The Wireless Remote Control is marked with a colored sign of different shape to avoid a mix up for installations with a multitude of Wireless Remote Control. The same marks are attached to the respective table and room during installation. These are two examples of colored signs of different shape to mark the remote control to an Aristos FX system. 6 /8 AXB4-310.621.01.01.02 - Draft - Addendum Wireless Remote Control - Draft Charging Station The Wireless Remote Control is plugged in the Charging Station for charging the batteries. It is recommended to charge the batteries every day after deployment. Charging Station If the Wireless Remote Control needs charging during a patient procedure, simply plug it in the Charging Station. Never use another charging device than the Charging Station delivered with the Wireless Remote Control. Usage of another charging station may cause severe damage to the Wireless Remote Control or may lead to hazards for the patients when the Wireless Remote Control is recharged during operation. Exchange of batteries The batteries of the Wireless Remote Control must be exchanged once a year by authorized and trained staff. Please call Siemens Service. Unauthorized exchange may cause severe damage. AXIOM Aristos FX AXB4-310.621.01.01.02 - Draft - 7 /8 Wireless Remote Control - Draft Technical Data Active range Approximately 5 m around the receiver mounted to the stand. Charging time Approx. 2 h Operating time with full batteries Approx. 12 h Frequency range 2402 MHz - 2480 MHz Modulation GFSK RF Power 0 dBm RF emissions CISPR 11 Compliance: Group 2 The deployment of Wireless Remote Control in combination with Aristos FX changes the classification of Artis from compliance group 1 to compliance group 2. 8 /8 AXB4-310.621.01.01.02 - Draft - Addendum
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 8 Page Mode : UseOutlines XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:18bbd245-fd73-483a-b122-99fae13ca0ad Producer : Acrobat Distiller 6.0.1 (Windows) Creator Tool : FrameMaker 7.0 Modify Date : 2005:11:24 15:37:51Z Create Date : 1995:07:24 11:33:19Z Document ID : uuid:c8c3c484-8b05-4c75-95b8-6dea524eb899 Format : application/pdf Title : WirelessRemControl_ADD.fm Creator : FrameMaker 7.0EXIF Metadata provided by EXIF.tools