Siemens MOBYI-SLG40N Tag Reader System User Manual MOBY I e

Siemens AG Tag Reader System MOBY I e

Contents

Users Manual Part 1

Table of ContentsGeneral 1Introduction to MOBY I 2Configuration and MountingGuidelines 3Mobile Data Memories 4Read/Write Devices 5Interfaces 6Accessories 7Documentation AError Messages BASCII Table CCompatibility DPublished in October, 20026GT2 097-4BA00-0EA2 Configuration, Installation and ServiceManualMOBYR I
This manual contains notices which you should observe to ensure your own personal safety, aswell as to protect the product and connected equipment. These notices are highlighted in themanual by a warning triangle and are marked as follows according to the level of danger:!Dangerindicates that death, severe personal injury or substantial property damage will result if properprecautions are not taken.!Warningindicates that death, severe personal injury or substantial property damage can result if properprecautions are not taken.!Cautionindicates that minor personal injury or property damage can result if proper precautions are nottaken.Cautionindicates that property damage can result if proper precautions are not taken.Notedraws your attention to particularly important information on the product, handling the product, orto a particular part of the documentation.The device/system may only be set up and operated in conjunction with this manual.Only qualified personnel should be allowed to install and work on this equipment. Qualifiedpersons are defined as persons who are authorized to commission, to ground, and to tag circuits,equipment, and systems in accordance with established safety practices and standards.Note the following:!WarningThis device and its components may only be used for the applications described in the catalog orthe technical description, and only in connection with devices or components from othermanufacturers which have been approved or recommended by Siemens.This product can only function correctly and safely if it is transported, stored, set up, and installedcorrectly, and operated and maintained as recommended.MOBYR, SIMATICR and SINECR are trademarks of SIEMENS AG.Some of the other designations used in these documents are also registered trademarks; theowner’s rights may be violated if they are used by third parties for their own purposes.We have checked the contents of this manual for agreementwith the hardware and software described. Since deviationscannot be precluded entirely, we cannot guarantee full agree-ment. However, the data in this manual are reviewed regularlyand any necessary corrections included in subsequent editions.Suggestions for improvement are welcomed.E Siemens AG 1997, 1998, 1999, 2000, 2001, 2002Technical data subject to change.Disclaimer of LiabilityCopyright ESiemens AG 1997 All rights reservedThe reproduction, transmission or use of this document or itscontents is not permitted without express written authority.Offenders will be liable for damages. All rights, includingrights created by patent grant or registration of a utility modelor design, are reserved.Siemens AGAutomation and DrivesSystems EngineeringP.O. Box 2355, D-90713 FuerthSiemens Aktiengesellschaft Order No. 6GT2 097-4BA00-0EA2Safety GuidelinesQualified PersonnelCorrect UsageTrademarks

Navigation menu