Siemens MOBYI-SLG40N Tag Reader System User Manual MOBY I e

Siemens AG Tag Reader System MOBY I e

Contents

Users Manual Part 1

Table of Contents
General 1
Introduction to MOBY I 2
Configuration and Mounting
Guidelines 3
Mobile Data Memories 4
Read/Write Devices 5
Interfaces 6
Accessories 7
Documentation A
Error Messages B
ASCII Table C
Compatibility D
Published in October, 2002
6GT2 097-4BA00-0EA2
Configuration,
Installation and Service
Manual
MOBYR I
This manual contains notices which you should observe to ensure your own personal safety, as
well as to protect the product and connected equipment. These notices are highlighted in the
manual by a warning triangle and are marked as follows according to the level of danger:
!Danger
indicates that death, severe personal injury or substantial property damage will result if proper
precautions are not taken.
!Warning
indicates that death, severe personal injury or substantial property damage can result if proper
precautions are not taken.
!Caution
indicates that minor personal injury or property damage can result if proper precautions are not
taken.
Caution
indicates that property damage can result if proper precautions are not taken.
Note
draws your attention to particularly important information on the product, handling the product, or
to a particular part of the documentation.
The device/system may only be set up and operated in conjunction with this manual.
Only qualified personnel should be allowed to install and work on this equipment. Qualified
persons are defined as persons who are authorized to commission, to ground, and to tag circuits,
equipment, and systems in accordance with established safety practices and standards.
Note the following:
!Warning
This device and its components may only be used for the applications described in the catalog or
the technical description, and only in connection with devices or components from other
manufacturers which have been approved or recommended by Siemens.
This product can only function correctly and safely if it is transported, stored, set up, and installed
correctly, and operated and maintained as recommended.
MOBYR, SIMATICR and SINECR are trademarks of SIEMENS AG.
Some of the other designations used in these documents are also registered trademarks; the
owner’s rights may be violated if they are used by third parties for their own purposes.
We have checked the contents of this manual for agreement
with the hardware and software described. Since deviations
cannot be precluded entirely, we cannot guarantee full agree-
ment. However, the data in this manual are reviewed regularly
and any necessary corrections included in subsequent editions.
Suggestions for improvement are welcomed.
E Siemens AG 1997, 1998, 1999, 2000, 2001, 2002
Technical data subject to change.
Disclaimer of LiabilityCopyright ESiemens AG 1997 All rights reserved
The reproduction, transmission or use of this document or its
contents is not permitted without express written authority.
Offenders will be liable for damages. All rights, including
rights created by patent grant or registration of a utility model
or design, are reserved.
Siemens AG
Automation and Drives
Systems Engineering
P.O. Box 2355, D-90713 Fuerth
Siemens Aktiengesellschaft Order No. 6GT2 097-4BA00-0EA2
Safety Guidelines
Qualified Personnel
Correct Usage
Trademarks

Navigation menu