Siemens MOBYI-SLG40SN Tag Reader System User Manual MOBY I e
Siemens AG Tag Reader System MOBY I e
Siemens >
Contents
- 1. Users Manual Part 1
- 2. Users Manual Part 2
- 3. Users Manual Part 3
Users Manual Part 1
Table of Contents MOBYR I Configuration, Installation and Service Manual 6GT2 097-4BA00-0EA2 Published in October, 2002 General Introduction to MOBY I Configuration and Mounting Guidelines Mobile Data Memories Read/Write Devices Interfaces Accessories Documentation Error Messages ASCII Table Compatibility Safety Guidelines This manual contains notices which you should observe to ensure your own personal safety, as well as to protect the product and connected equipment. These notices are highlighted in the manual by a warning triangle and are marked as follows according to the level of danger: Danger indicates that death, severe personal injury or substantial property damage will result if proper precautions are not taken. Warning indicates that death, severe personal injury or substantial property damage can result if proper precautions are not taken. Caution indicates that minor personal injury or property damage can result if proper precautions are not taken. Caution indicates that property damage can result if proper precautions are not taken. Note draws your attention to particularly important information on the product, handling the product, or to a particular part of the documentation. Qualified Personnel The device/system may only be set up and operated in conjunction with this manual. Only qualified personnel should be allowed to install and work on this equipment. Qualified persons are defined as persons who are authorized to commission, to ground, and to tag circuits, equipment, and systems in accordance with established safety practices and standards. Correct Usage Note the following: Warning This device and its components may only be used for the applications described in the catalog or the technical description, and only in connection with devices or components from other manufacturers which have been approved or recommended by Siemens. This product can only function correctly and safely if it is transported, stored, set up, and installed correctly, and operated and maintained as recommended. Trademarks MOBYR, SIMATICR and SINECR are trademarks of SIEMENS AG. Some of the other designations used in these documents are also registered trademarks; the owner’s rights may be violated if they are used by third parties for their own purposes. Copyright E Siemens AG 1997 All rights reserved Disclaimer of Liability The reproduction, transmission or use of this document or its contents is not permitted without express written authority. Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. We have checked the contents of this manual for agreement with the hardware and software described. Since deviations cannot be precluded entirely, we cannot guarantee full agreement. However, the data in this manual are reviewed regularly and any necessary corrections included in subsequent editions. Suggestions for improvement are welcomed. Siemens AG Automation and Drives Systems Engineering P.O. Box 2355, D-90713 Fuerth Siemens Aktiengesellschaft E Siemens AG 1997, 1998, 1999, 2000, 2001, 2002 Technical data subject to change. Order No. 6GT2 097-4BA00-0EA2
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Producer : AFPL Ghostscript 8.0 Create Date : 2003:12:15 10:28:35 Modify Date : 2003:12:16 14:54:27+01:00 Title : MOBY_I_e.pdf Creator : PScript5.dll Version 5.2 Author : SB2851 Page Count : 2EXIF Metadata provided by EXIF.tools