Siemens MOBYI-SLG40SN Tag Reader System User Manual MOBY I e

Siemens AG Tag Reader System MOBY I e

Contents

Users Manual Part 3

5-1MOBY I Configuration, Installation and Service Manual(4) J31069-D0033-U001-A8-7618Read/Write Devices 5
5-2 MOBY I Configuration, Installation and Service Manual(4) J31069-D0033-U001-A8-76185.1 IntroductionThe read/write devices (i.e., SLGs) provide inductive communication withthe mobile data memories (i.e., MDSs) and the serial link to the interfaces(i.e., ASMs).Various SLG models – for short, medium and long distances to the MDS –are available to meet customer requirements.The SLG executes commands received from the interface.  These commandsfor reading and writing data are converted via a modulator/demodulator cir-cuit.Communication between MDS and SLG takes place via inductive alternatingfields.The amount of data which can be transferred between SLG and MDS de-pends on the factors listed below.SThe speed at which the MDS moves through the transmission window ofthe SLGSThe length of the transmission windowSThe type of MDS (i.e., RAM, FRAM, EEPROM)Table 5-1 Overview table of the SLGSLG Type OperatingDistance Sa(Depending onMDS)Limit Distance SgTemperatureRange(DuringOperation)Dimensions(WxHxD) in mmProtectionRatingSLG 40 2 to 8 mm 10 mm –25 to +70° C∅ 30 x 54 (head) IP65SLG 40-S 2 to 6 mm 8 mm –25 to +70° C∅ 18 x 30 (head) IP65SLG 41/41-S 0 to 15 mm 25 mm –25 to +70° C 120 x 40 x 40 IP65SLG 41C/41CC 0 to 15 mm 25 mm –25 to +70° C 55 x 75 x 30 IP67SLG 42 0 to 55 mm 70 mm –25 to +70° C 75 x 40 x 75 IP65SLG 43 0 to 100 mm 150 mm –25 to +70° C 238 x 40 x 80 IP65SLG 44 100 to 800 mm 1000 mm –25 to +70° C 238 x 40 x 80 IP63Application areaLayout and func-tionsOverview tableRead/Write Devices
5-3MOBY I Configuration, Installation and Service Manual(4) J31069-D0033-U001-A8-76185.2 SLG 40The SLG 40 is extremely suited for use on small assembly lines.  The shortinstallation distance between several SLG 40 antennas is a special feature.With the 2 included screw nuts, the antenna head can be positioned with ex-treme precision for each application.Figure 5-1 Read/write device SLG 40Table 5-2 Ordering data for SLG 40Read/write device SLG 40up to 10 mm (low power), incl. screw nutsAccessories:SLG plug connector and stub linesMounting clamp6GT2 001-0EA10See chapter 3.103SX6 284Table 5-3 Technical data of SLG 40Inductive interface to MDSData transmission speedRead/write distanceSLG to MDS (max.)Transmission frequencySPowerSData19200 baud10 mm (see field data table)134 kHz1.81 MHzSerial interface to ASMTransmission speedLine length, ASM to SLG (max.) at 24 V DC6-pin SLG plug connector in acc. w. DIN 4365119200 baud, RS 422360 mSupply voltage(via serial interface)Nominal valuePermissible rangeCurrent consumptionIdle/operation24 V DC20 to 30 V DC25 mA/90 mAMTBF 2 x 106Application areaOrdering dataTechnical dataRead/Write Devices
5-4 MOBY I Configuration, Installation and Service Manual(4) J31069-D0033-U001-A8-7618Table 5-3 Technical data of SLG 40HousingDimensions (in mm)For antenna head (∅ x threading x L)For electronics w/o plug (WxHxD)Color AntennaSLG housingMaterial AntennaSLG housingPlug connectionM30 x 1.5 x 54125 x 40 x 75Anthracite with orange headErgo-gray“Crastin”Polyamide 12DIN 43651Protection ratingAntenna and SLG housingShockVibrationIP6550 g20 gMounting of SLGTurning moment (at room temperature)4 M5 screwsv 2 NmAmbient temperatureDuring operationDuring transportation and storage–25° to +70° C–40° to +85° CWeight (approx.) 215 gCertifications EN 300 330FCC Part 15UL/CSAApplicable for MDS 402/401Table 5-4 Field data of SLG 40Operating distance (Sa) 2 to 8 mmLimit distance (Sg) 10 mmMedian deviation (Ld) 18 mm (+ 9 mm from middle)Minimum distance from SLG to SLG (D) Daw 50 mmDbw 80 mmMade in GermanySIEMENS MOBY I SLG 40THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES: OPERATION IS SUBJECT TOTHE FOLLOWING TWO CONDITIONS:(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUSTACCEPT ANY INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.NoteThe manufacturer is not responsible for any radio or TV interference causedby unauthorized modifications to this equipment:Such modifications could void the user’s authority to operate the equipment.Field dataFCC informationRead/Write Devices
5-5MOBY I Configuration, Installation and Service Manual(4) J31069-D0033-U001-A8-7618LdView of topLdsgsaField at Sa = 2 mmField at Sa = 8 mmView of sideFigure 5-2 View of the antennaTransmission window:To ensure reliable data communication, the antenna of the MDS must bepositioned within this field.  A diameter of Ld = 18 mm can be configured forthe operating distance (2 to 8 mm).aMOBY ISLG 40baa = 10 mmb = 10 mmMetal-free space with flushinstallationNote:The limit and operating distancesare reduced when the metal-freespace is not adhered to.Figure 5-3 Metal-free space for SLG 40302936581819,53042,5Figure 5-4 Mounting diagram and dimensions of SLG 40 with mounting clampTransmission windowMetal-free spaceOptional  mountingclampRead/Write Devices
5-6 MOBY I Configuration, Installation and Service Manual(4) J31069-D0033-U001-A8-7618DbDaDaw 50 mmDbw 80 mmThe SLG electronics can be mounted directlynext to each other.Figure 5-5 Distance D for SLG 4075651251155.554M30214036MOBY ISLG 40MOBY ISLG 40Antenna headAnti-kink cable protector, flexiblein all directionsMinimum bendingradius: 20 mmCable length 0.5 mScrew nutsAntenna sideTop view of antenna headFigure 5-6 Dimensional diagram of SLG 40Definition ofdistance DDimensions(in mm)Read/Write Devices
5-7MOBY I Configuration, Installation and Service Manual(4) J31069-D0033-U001-A8-76185.3 SLG 40-SThe SLG 40 is extremely suited to use in small assembly lines.  The shortinstallation distance between several SLG 40-S antennas is a special feature.With the 2 included screw nuts, the antenna head can be positioned with ex-treme precision for each application.Figure 5-7 Read/write device SLG 40-STable 5-5 Ordering data for SLG 40-SRead/write device SLG 40-Sup to 8 mm (low power), incl. screw nutsSLG plug connector and stub lines6GT2 001-0EB00See chapter 3.10Table 5-6 Technical data of SLG 40-SHousingDimensions (in mm)For antenna head (∅ x threading x L)For electronics w/o plug (L xW x H)Color AntennaSLG housingMaterial AntennaSLG housingPlug connectionM18 x 1.0 x 3075 x 75 x 40Anthracite with orange headErgo-gray“Crastin”Polyamide 12DIN 43651Protection ratingAntenna and SLG housingShockVibrationIP6550 g20 gStorage temperatureOperation temperature–40° to +85° C–25° to +70° CApplication areaOrdering dataTechnical dataRead/Write Devices
5-8 MOBY I Configuration, Installation and Service Manual(4) J31069-D0033-U001-A8-7618Table 5-6 Technical data of SLG 40-SOperating voltageCurrentconsumption IdleOperation17 to 30 V DC25 mA90 mASerial interface RS 422Transmission speed 19200 baudMax. cable length (cf. chap. 3.10.1; stan-dard cable)360 mMTBF 2 x 106Transmission frequencySPowerSData134 kHz1.81 MHzMounting of SLGTurning moment (at room temperature)4 M5 screwsv 2 NmMounting of SLG head (included) 2 nuts (M18 x 1.0)Weight (approx.) 200 gCertifications EN 300 330FCC Part 15UL/CSAApplicable for MDS 401/402Table 5-7 Field data of SLG 40-SOperating distance (Sa) 2 to 6 mmLimit distance (Sg) 8 mmDiameter of transmission window (Ld) 9 mmMedian deviation " 4.5 mm from middleMinimum distance from SLG to SLG (D) Daw 50 mmDbw 80 mmMade in GermanySIEMENS MOBY I SLG 40STHIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES: OPERATION IS SUBJECT TOTHE FOLLOWING TWO CONDITIONS:(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUSTACCEPT ANY INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.NoteThe manufacturer is not responsible for any radio or TV interference causedby unauthorized modifications to this equipment:Such modifications could void the user’s authority to operate the equipment.Field dataFCC informationRead/Write Devices
5-9MOBY I Configuration, Installation and Service Manual(4) J31069-D0033-U001-A8-7618LdLdsgsaView of topField at Sa = 2 mmField at Sa = 8 mmView of sideFigure 5-8 View of the antennaTransmission window:To ensure reliable data communication, the antenna of the MDS must bepositioned within this field.aMOBY ISLG 40-Sbaa = 10 mmb = 10 mmMetal-free space with flushinstallationNote:The limit and operating distancesare reduced when the metal-freespace is not adhered to.Figure 5-9 Metal-free space for SLG 40-SDbDaDaw 50 mmDbw 80 mmThe SLG electronics can be mounted directlynext to each other.Figure 5-10 Distance D for SLG 40-STransmissionwindowMetal-free spaceDefinition of distance DRead/Write Devices
5-10 MOBY I Configuration, Installation and Service Manual(4) J31069-D0033-U001-A8-7618305024MOBY I756555755.51825Antenna headAnti-kink cable protector, flexible in all directionsMinimum bendingradius: 20 mmCable length 0.5 mScrew nutsAntenna sideTop view of antenna headM18Fine threadingPitch 1.0SLG 40-SFigure 5-11 Dimensional diagram of SLG 40-SDimensions(in mm)Read/Write Devices

Navigation menu