Siemens MPCI1V2 Wireless LAN Access Point Module User Manual Manual Statement
Siemens AG Wireless LAN Access Point Module Manual Statement
Siemens >
Contents
Manual Statement
Zulassungen 7.1 Zulassungen SCALANCE W786 Hinweis Die angegebenen Zulassungen gelten erst dann als erteilt, wenn auf dem Produkt eine entsprechende Kennzeichnung angebracht ist. ATEX- und cULus-Zulassungen Die Produkte SCALANCE W786-1PRO SCALANCE W786-2PRO SCALANCE W786-3PRO verfügen über die Zulassungen ● EN 50021 ● c-UL-us UL 60950-1CSA C22.2 No. 60950-1 Hinweis Die angegebenen Zulassungen gelten erst dann als erteilt, wenn auf dem Produkt eine entsprechende Kennzeichnung angebracht ist. FCC-Zulassung This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IEEE802.11b or g operation of this product in the USA is firmware-limited to channels 1 through11. _________________________________________________________________________________ Notice Changes or modifications made to this equipment not expressly approved by SIEMENS may void the FCC authorization to operate this equipment. _________________________________________________________________________________ This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television 62 SCALANCE W786-xPRO Betriebsanleitung (kompakt), Ausgabe 02/2008, A5E01048819-04 Zulassungen 7.1 Zulassungen SCALANCE W786 reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. _________________________________________________________________________________ Notice This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. _________________________________________________________________________________ This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Professional Installation Notice: To comply with FCC part 15 rules in the United States, the system must be professionally installed to ensure compliance with the Part 15 certification. It is the responsibility of the operator and professional installer to ensure that only certified systems are deployed in the United States. The use of the system in any other combination (such as co-located antennas transmitting the same information) is expressly forbidden. RSS-210 of Industry Canada "Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device." "This device has been designed to operate with the antennas listed below, and having a maximum gain of 18 dBi. Antennas not included in this list or having a gain greater than 18 dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms." "To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication." "That the device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems." "Users should also be cautioned to take note that high power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices." SCALANCE W786-xPRO Betriebsanleitung (kompakt), Ausgabe 02/2008, A5E01048819-04 63
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : 3.1-702 Modify Date : 2008:02:15 10:47:43+01:00 Create Date : 2008:02:15 10:47:22+01:00 Metadata Date : 2008:02:15 10:47:43+01:00 Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : Microsoft Word - BAK_SCALANCE-W786_0_2007-12-13.doc Creator : reinshag Document ID : uuid:5ee1619e-fe98-4fa0-81a7-7601223e7d1a Instance ID : uuid:cf8d8b1e-ee05-4716-b8b0-bf918f99d5f9 Producer : Acrobat Distiller 7.0.5 (Windows) Page Count : 2 Author : reinshagEXIF Metadata provided by EXIF.tools