Siemens MPCI1V2 Wireless LAN Access Point Module User Manual Manual Statement
Siemens AG Wireless LAN Access Point Module Manual Statement
Siemens >
Contents
Manual Statement
Zulassungen
7.1 Zulassungen SCALANCE W786
SCALANCE W786-xPRO
62 Betriebsanleitung (kompakt), Ausgabe 02/2008, A5E01048819-04
Hinweis
Die angegebenen Zulassungen gelten erst dann als erteilt, wenn auf dem Produkt eine
entsprechende Kennzeichnung angebracht ist.
ATEX- und cULus-Zulassungen
Die Produkte
SCALANCE W786-1PRO
SCALANCE W786-2PRO
SCALANCE W786-3PRO
verfügen über die Zulassungen
● EN 50021
● c-UL-us
UL 60950-1CSA C22.2 No. 60950-1
Hinweis
Die angegebenen Zulassungen gelten erst dann als erteilt, wenn auf dem Produkt eine
entsprechende Kennzeichnung angebracht ist.
FCC-Zulassung
This device complies with Part 15 of the FCC Rules
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
IEEE802.11b or g operation of this product in the USA is firmware-limited to channels 1
through11.
_________________________________________________________________________________
Notice
Changes or modifications made to this equipment not expressly approved by SIEMENS may
void the FCC authorization to operate this equipment.
_________________________________________________________________________________
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
Zulassungen
7.1 Zulassungen SCALANCE W786
SCALANCE W786-xPRO
Betriebsanleitung (kompakt), Ausgabe 02/2008, A5E01048819-04 63
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
_________________________________________________________________________________
Notice
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20 cm
between the radiator and your body.
_________________________________________________________________________________
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Professional Installation Notice:
To comply with FCC part 15 rules in the United States, the system must be professionally
installed to ensure compliance with the Part 15 certification. It is the responsibility of the
operator and professional installer to ensure that only certified systems are deployed in the
United States. The use of the system in any other combination (such as co-located antennas
transmitting the same information) is expressly forbidden.
RSS-210 of Industry Canada
"Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that
may cause undesired operation of the device."
"This device has been designed to operate with the antennas listed below, and having a
maximum gain of 18 dBi. Antennas not included in this list or having a gain greater than 18
dBi are strictly prohibited for use with this device. The required antenna impedance is 50
ohms."
"To reduce potential radio interference to other users, the antenna type and its gain should
be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that
permitted for successful communication."
"That the device for the band 5150-5250 MHz is only for indoor usage to reduce potential for
harmful interference to co-channel mobile satellite systems."
"Users should also be cautioned to take note that high power radars are allocated as primary
users (meaning they have priority) of 5250-5350 MHz and 5650-5850 MHz and these radars
could cause interference and/or damage to LE-LAN devices."