Siemens RF260R RFID Reader User Manual Technical Data RF260R Short Form

Siemens AG RFID Reader Technical Data RF260R Short Form

user manual

Technical Data RF260R – Short Form Remarks: The RF260R manual does not yet exist, even in German language. The RF260R manual, once completed, will contain detailed information about field-data, range for certain tags, information about how to implement the RF260R in a production site with communication modules. This detailed information may not be much relevant for RF260R FCC approval. Below given are short system overview and technical data which are required in order to run the RF260R for testing and to check the reader’s function. RF200 System overview SIMATIC RF200 is an inductive identification system, based on the standard ISO 15693, which was specially designed for industrial production for controlling and optimization material flow. Contrary to SIMATIC RF300, SIMATIC RF200 is designed for RFID applications for lower demands on performance (data volume, data transfer speed, diagnostics). SIMATIC RF200 is a low-price RFID system. Component Description Communications Modules Integration of an RFID Identification system is achieved by a communications module. Reader The reader achieves the communication with the tag and provides the tag with energy by the reader’s magnetic field. The reader also interfaces to various modules (i.e. SIMATIC S7 via ASM 475). Tag The RFID-tag stores all data relevant for production and is used as a substitute for optical barcode-tags.
Overview of System Components compatible with RF260R System components Communications modules • ASM 456 • ASM 475 (S7 300/ ET 200M) • RF160C • RF170C • RF180C • RF182C Tags • MDS D100 • MDS D200 • MDS D124 • MDS D139 • MDS D160 • MDS D324 • MDS D421 • MDS D424 • MDS D428 • MDS D460 Technical Data RF260R (short form) Inductive interface (magnetic field) to transponder (tag). Carrier frequency for energy / data 13,56 MHz Antenna Integrated loop Interface to communications module RS422 Baud rate 19200, 57600, 115200 Baud Functions Initialize tag, read tag, write on tag, get status data, antenna on/off, read tag serial number DC-Voltage (nominal) 24 V DC Display elements 2-color-LED (operating voltage, presence, error) Connector M12 (8-pin.) Housing • Dimensions (in mm) • Color • Material • 75 x 75 x 41 (without M12 device connector) • anthracite • PA6.6-GF35 (Ultramid A3WG7) Fixing 2 Screws, M5 type Degree of protection to EN 60529 IP67 Weight 200 g Current consumption 40mA
Pin assignment RF260R (RS422 interface) M12 connector (male) Pin No. M12 plug Pin 1 +24V 2 -TX 3 0V (GND) 4 +TX 5 +RX 6 -RX 7 Not used (free) 8 PE / shield LED indicator (display elements) RF260R LED colour Meaning flashing Operating voltage available, reader NOT initialized green Permanently on Operating voltage available. Reader initialized. yellow Tag in field (tag presence) red (flashing) Errors according to error code table. red (permanently on) Fatal error Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
RF260R housing and dimensions

Navigation menu