Siemens 9300 Users Manual Series User’s Guide

2015-02-05

• Notices
• Contents
• 1 Introduction
  • 9300 Series Meters
  • The ACCESS Meter in an Enterprise Energy Management System
    • Data Display and Analysis Tools
    • Communications Protocols
    • Digital and Analog I/O Options
    • The Meter is Factory-Configured and Ready to Operate
    • Meter Firmware Revision History
    • Ethernet Card Firmware Revision History
  • Using this Guide
    • Getting More Information
• 2 Using The Front Panel
  • Displaying Data with the Front Panel
    • Front Panel Display Resolution
    • Default Front Panel Display Screens
  • Configuring the Meter with the Front Panel
    • The Front Panel’s Setup Menus
    • Clear Functions Menu
    • Quick Setup Menu
    • Advanced Meter Setup Menu
    • Display Setup Menu
    • Screen Setup Menu
    • Nameplate Info Menu
    • Security Menu
    • Diagnostic Menu
  • Custom Front Panel Displays
    • Before Customizing the Front Panel
• 3 Default Meter Functionality
  • Default Meter Functionality
    • Basic Setup
    • Communications Setup
    • Power Quality Setup (9350)
    • Data Logging Setup
    • Setpoint Configuration (9330 and 9350)
    • Meter Clock Configuration
    • Display Configuration
    • Demand Setup
    • Factory Information
  • Third Party Protocols
    • Using the Modbus RTU Protocol
    • Using the Modbus/TCP Protocol
    • Using the DNP 3.0 Protocol
    • Using the Profibus Protocol
  • Restoring the Factory Configuration
• 4 Using ACCESS Software
  • WinPM.Net Software
  • WinPM.Net: Management Console
    • Configuring Communications
  • WinPM.Net: Vista
    • Displaying Data with Vista
    • Customizing the Vista Interface
  • WinPM.Net: Designer
    • Basics of ION Architecture
    • Designer’s Main Configuration Screen
    • Viewing Real-time Data in Designer
    • Changing Setup Registers with Designer
    • Customizing Frameworks in Designer
  • WinPM.Net: Reporter
    • Pre-configured Reports
    • Report Creation and Generation
  • ION Setup Software
    • Configuring Communications
    • Basic Meter Configuration
    • Displaying Data with ION Setup
• 5 Features and Applications
  • Communications
    • RS-485 Connections
    • Optical Port Connections
    • Ethernet Connections
    • Internal Modem Connections
    • Profibus Connections (9300)
  • Internet Connectivity
    • WebMeter and MeterM@il
    • WebReach
    • Telnet and Hyperterminal
  • Digital and Analog I/O
    • Specifying a Port In an ION Module
    • Using the Onboard Digital Outputs
    • Using the Onboard Digital Inputs
    • Using the Optional Analog Inputs
    • Using the Optional Analog Outputs
  • Data and Event Logging
    • Data Logging (9330 and 9350)
    • Event Logging
    • Logging and Recording Capacity
  • Time Synchronization
  • Meter Security
    • Standard Meter Security
  • Residual Current Calculation (I4)
  • Alerting
    • Alerting ION Software via the Alarm Server
    • Alerting via an Alphanumeric Pager
    • Alerting via a Numeric Pager
    • Alerting via Email (9330 and 9350)
• 6 Revenue Metering
  • 9300 Series Revenue Meters
    • Differences between Standard and Revenue Models
    • Security Mechanisms
    • Configuring the Revenue Meter
• 7 Hardware Reference
  • Standard Model
    • General Specifications
    • Unit Dimensions
    • Communications Specifications
    • COM1 Port
    • COM 2 Port
    • COM 3 Port
    • Ethernet Port
    • Profibus Port
    • Internal Modem
    • LEDs
  • I/O Connections
  • Electrical Specifications
  • Options and Retrofits
    • Terminal Cover
    • Remote Modular Display
    • Switchboard Case
    • Relay Expansion Board (Grayhill Rack)
    • Analog I/O
  • TRAN Model
    • Unit Dimensions