Siemens Micromaster 440 Users Manual 440_COM_en_1006

2015-02-05

• Warnings, Cautions and Notes
• Contents
• 1 Installation
  • 1.1 Clearance distances for mounting
  • 1.2 Mounting dimensions
• 2 Electrical Installation
  • 2.1 Technical Specifications
  • 2.2 Power Terminals
  • 2.3 Control terminals
  • 2.4 Block diagram
• 3 Factory setting
  • 3.1 50/60 Hz DIP switch
• 4 Communications
  • 4.1 Establishing communications MICROMASTER <--> STARTER
  • 4.2 Establishing communications MICROMASTER 440 <--> AOP
  • 4.3 Bus interface (CB)
• BOP / AOP (Option)
  • 5.1 Buttons and their Functions
  • 5.2 Changing parameters using as an example P0004 " Parameter filter function"
• 6 Commissioning
  • 6.1 Quick commissioning
  • 6.2 Motor data identification
  • 6.3 Magnetizing current
  • 6.4 Commissioning the application
    • 6.4.1 Serial Interface (USS)
    • 6.4.2 Selection of command source
    • 6.4.3 Digital input (DIN)
    • 6.4.4 Digital outputs (DOUT)
    • 6.4.5 Selection of frequency setpoint
    • 6.4.6 Analog input (ADC)
    • 6.4.7 Analog output (DAC)
    • 6.4.8 Motor potentiometer (MOP)
    • 6.4.9 Fixed frequency (FF)
    • 6.4.10 JOG
    • 6.4.11 Ramp function generator (RFG)
    • 6.4.12 Reference/limit frequencies
    • 6.4.13 Inverter protection
    • 6.4.14 Motor protection
    • 6.4.15 Encoder
    • 6.4.16 V/f control
    • 6.4.17 Field-orientated control
      • 6.4.17.1 Sensorless vector control (SLVC)
      • 6.4.17.2 Vector control with encoder (VC)
    • 6.4.18 Converter-specific Functions
      • 6.4.18.1 Flying start
      • 6.4.18.2 Automatic restart
      • 6.4.18.3 Holding brake
      • 6.4.18.4 DC brake
      • 6.4.18.5 Compound braking
      • 6.4.18.6 Dynamic braking
      • 6.4.18.7 Vdc controller
      • 6.4.18.8 Load torque monitoring
      • 6.4.18.9 PID controller
      • 6.4.18.10 Positioning down ramp
      • 6.4.18.11 Free function blocks (FFB)
    • 6.4.19 Data sets
    • 6.4.20 Diagnostic parameters
  • 6.5 Series commissioning
  • 6.6 Parameter reset of factory setting
• 7 Displays and messages
  • 7.1 LED status display
  • 7.2 Fault messages and Alarm messages