Siemens Simatic M7 400 Users Manual S7 400, Programmable Controllers Module Specifications

2015-02-05

• Title
• Preface
• Contents
• 1 General Technical Specifications
  • 1.1 Standards and Approvals
  • 1.2 Electromagnetic Compatibility
  • 1.3 Shipping and Storage Conditions for Modules and Backup Batteries
  • 1.4 Mechanical and Ambient Climatic Conditions for Operating the S7-400/M7-400
  • 1.5 Information on Insulation Tests, Protection Class and Degree of Protection
  • 1.6 Using S7-400 in a zone 2 explosion–risk area
• 2 Racks
  • 2.1 Function and Structure of the Racks
  • 2.2 The Racks UR1; (6ES7400-1TA01-0AA0) and UR2; (6ES7400-1JA01-0AA0)
  • 2.3 The Rack UR2-H; (6ES7400-2JA00-0AA0)
  • 2.4 The Rack CR2; (6ES7401-2TA01-0AA0)
  • 2.5 The Rack CR3; (6ES7401-2TA01-0AA0)
  • 2.6 The Racks ER1; (6ES7403-1TA01-0AA0) and ER2; (6ES7403-1JA01-0AA0)
• 3 Power Supply Modules
  • 3.1 Common Characteristics of the Power Supply Modules
  • 3.2 Redundant Power Supply Modules
  • 3.3 Backup Battery (Option)
  • 3.4 Controls and Indicators
  • 3.5 Fault/Error Messages via LEDs
  • 3.6 Power Supply Module PS 407 4A; (6ES7407-0DA00-0AA0)
  • 3.7 Power Supply Module PS 407 4A; (6ES7407-0DA01-0AA0)
  • 3.8 Power Supply Modules PS 407 10A; (6ES7407-0KA01-0AA0) and PS 407 10A R; (6ES7407-0KR00-0AA0)
  • 3.9 Power Supply Module PS 407 20A; (6ES7407-0RA00-0AA0)
  • 3.10 Power Supply Module PS 407 20A; (6ES7407-0RA00-0AA0)
  • 3.11 Power Supply Module PS 405 4A; (6ES7405-0DA00-0AA0)
  • 3.12 Power Supply Module PS 405 4A; (6ES7405-0DA01-0AA0)
  • 3.13 Power Supply Module PS 405 10A; (6ES7405-0KA00-0AA0)
  • 3.14 Power Supply Modules PS 405 10A; (6ES7405-0KA01-0AA0) and PS 405 10A R; (405-0KR00-0AA0)
  • 3.15 Power Supply Module PS 405 20A; (6ES7405-0RA00-0AA0)
  • 3.16 Power Supply Module PS 405 20A; (6ES7405-0RA01-0AA0)
• 4 Digital Modules
  • 4.1 Module Overview
  • 4.2 Sequence of Steps from Choosing to Commissioning
  • 4.3 Digital Module Parameter Assignment
    • 4.3.1 Parameters of the Digital Input Modules
    • 4.3.2 Parameters of the Digital Output Modules
  • 4.4 Diagnostics of the Digital Modules
  • 4.5 Interrupts of the Digital Modules
  • 4.6 Input Characteristic Curve for Digital Inputs
  • 4.7 Digital Input Module SM 421; DI 32 x 24 VDC (6ES7421-1BL00-0AA0)
  • 4.8 Digital Input Module SM 421; DI 32 x 24 VDC; (6ES7421-1BL01-0AA0)
  • 4.9 Digital Input Module SM 421; DI 16 x 24 VDC; (6ES7421-7BH00-0AB0)
    • 4.9.1 Assigning Parameters to the SM 421; DI 16 x 24 VDC
    • 4.9.2 Behavior of the SM 421; DI 16 x 24 VDC
  • 4.10 Digital Input Module SM 421; DI 16 x 24 VDC; (6ES7421-7BH01-0AB0)
    • 4.10.1 Assigning Parameters to the SM 421; DI 16 x 24 VDC
    • 4.10.2 Behavior of the SM 421; DI 16 x 24 VDC
  • 4.11 Digital Input Module SM 421; DI 16 x 120 VAC; (6ES7421-5EH00-0AA0)
  • 4.12 Digital Input Module SM 421; DI 16 x 24/60 VUC; (6ES7 421-7DH00-0AB0)
    • 4.12.1 Assigning Parameters to the SM 421; DI 16 x 24/60 VUC
  • 4.13 Digital Input Module SM 421; DI 16 x 120/230 VUC; (6ES7 421-1FH00-0AA0)
  • 4.14 Digital Input Module SM 421; DI 16 x 120/230 VUC; (6ES7421-1FH20-0AA0)
  • 4.15 Digital Input Module SM 421; DI 32 x 120 VUC; (6ES7421-1EL00-0AA0)
  • 4.16 Digital Output Module SM 422; DO 16 x 24 VDC/2 A; ( 6ES7422- 1BH10- 0AA0)
  • 4.17 Digital Output Module SM 422; DO 16 x 24 VDC/2 A; ( 6ES7422- 1BH11- 0AA0)
  • 4.18 Digital Output Module SM 422; DO 16 x 20-125 VDC/1.5 A; (6ES7422-5EH10-0AB0)
    • 4.18.1 Assigning Parameters to the SM 422; DO 16 x 20-125 VDC/1.5 A
  • 4.19 Digital Output Module SM 422; DO 32 x 24 VDC/0.5 A; (6ES7422-1BL00-0AA0)
  • 4.20 Digital Output Module SM 422; DO 32 x 24 VDC/0.5 A; (6ES7422-7BL00-0AB0)
    • 4.20.1 Assigning Parameters to the SM 422; DO 32 x 24 VDC/0.5 A
    • 4.20.2 Behavior of the SM 422; DO 32 x 24 VDC/0.5 A
  • 4.21 Digital Output Module SM 422; DO 8 x 120/230 VAC/5 A; (6ES7422-1FF00-0AA0)
  • 4.22 Digital Output Module SM 422; DO 16 x 120/ 230 VAC/ 2 A; (6ES7422-1FH00-0AA0)
  • 4.23 Digital Output Module SM 422; DO 16 x 20-120 VAC/2 A; (6ES7422-5EH00-0AB0)
    • 4.23.1 Assigning Parameters to the SM 422; DO 16 20-120 VAC/2 A
  • 4.24 Relay Output Module SM 422; DO 16 x 30/ 230 VUC/ Rel. 5 A; (6ES7422-1HH00-0AA0)
• 5 Analog Modules
  • 5.1 Module Overview
  • 5.2 Sequence of Steps from Choosing to Commissioning the Analog Modules
  • 5.3 Analog Value Representation
    • 5.3.1 Analog Value Representation for Analog Input Channels
    • 5.3.2 Analog Value Representation for Analog Output Channels
  • 5.4 Setting the Measuring Method and Measuring Ranges of the Analog Input Channels
  • 5.5 Behavior of the Analog Modules
    • 5.5.1 Effect of Supply Voltage and Operating Mode
    • 5.5.2 Effect of Range of Values of the Analog Values
    • 5.5.3 Effect of Operational Limit and Basic Error Limit
  • 5.6 Conversion, Cycle, Setting and Response Time of Analog Modules
  • 5.7 Analog Module Parameter Assignment
    • 5.7.1 Parameters of the Analog Input Modules
    • 5.7.2 Parameters of the Analog Output Modules
  • 5.8 Connecting Sensors to Analog Inputs
  • 5.9 Connecting Voltage Sensors
  • 5.10 Connecting Current Sensors
  • 5.11 Connecting Resistance Thermometers and Resistors
  • 5.12 Connecting Thermocouples
  • 5.13 Connecting Loads/Actuators to Analog Outputs
  • 5.14 Connecting Loads/Actuators to Voltage Outputs
  • 5.15 Connecting Loads/Actuators to Current Outputs
  • 5.16 Diagnostics of the Analog Modules
  • 5.17 Analog Module Interrupts
  • 5.18 Analog Input Module SM 431; AI 8 x 13 Bit; (6ES7431-1KF00-0AB0)
    • 5.18.1 Commissioning the SM 431; AI 8 x 13 Bit
    • 5.18.2 Measuring Methods and Measuring Ranges of the SM 431; AI 8 x 13 Bit
  • 5.19 Analog Input Module SM 431; AI 8 x 14 Bit; (6ES7 431-1KF10-0AB0)
    • 5.19.1 Commissioning the SM 431; AI 8 x 14 Bit
    • 5.19.2 Measuring Methods and Measuring Ranges of the SM 431; AI 8 x 14 Bit
  • 5.20 Analog Input Module SM 431; AI 8 x 14 Bit; (6ES7431-1KF20-0AB0)
    • 5.20.1 Commissioning the SM 431; AI 8 x 14 Bit
    • 5.20.2 Measuring Methods and Measuring Ranges of the SM 431; AI 8 x 14 Bit
  • 5.21 Analog Input Module SM 431; AI 16 x 13 Bit;
    • 5.21.1 Commissioning the SM 431; AI 16 x 13 Bit
    • 5.21.2 Measuring Methods and Measuring Ranges of the SM 431; AI 16 x 13 Bit
  • 5.22 Analog Input Module SM 431; AI 16 x 16 Bit; (6ES7431-7QH00-0AB0)
    • 5.22.1 Commissioning the SM 431; AI 16 x 16 Bit
    • 5.22.2 Measuring Methods and Measuring Ranges of the SM 431; AI 16 x 16 Bit
  • 5.23 Analog Input Module SM 431; AI 8 x RTD x 16 Bit; (6ES7 431-7KF10-0AB0)
    • 5.23.1 Commissioning the SM 431; AI 8 x RTD x 16 Bit
    • 5.23.2 Measuring Methods and Measuring Ranges of the SM 431; AI 8 x RTD x 16 Bit
  • 5.24 Analog Input Module SM 431; AI 8 x 16 Bit; (6ES7431-7KF00-0AB0)
    • 5.24.1 Commissioning the SM 431; AI 8 x 16 Bit
    • 5.24.2 Measuring Methods and Measuring Ranges of the SM 431; AI 8 x 16 Bit
  • 5.25 Analog Output Module SM 432; AO 8 x 13 Bit; (6ES7432-1HF00-0AB0)
    • 5.25.1 Commissioning the SM 432; AO 8 x 13 Bit
• 6 Interface Modules
  • 6.1 Common Features of the Interface Modules
  • 6.2 The Interface Modules IM 460-0; (6ES7460-0AA00-0AB0, 6ES7460-0AA01-0AB0) and IM 461-0; (6ES7461-0AA00-0AA0, 6ES7461-0AA01-0AA0)
  • 6.3 The Interface Modules IM 460-1; (6ES7460-1BA00-0AB0, 6ES7460-1BA01-0AB0) and IM 461-1; (6ES7461-1BA00-0AA0, 6ES7461-1BA01-0AA0)
  • 6.4 The Interface Modules IM 460-3; ( 6ES7460- 3AA00- 0AB0, 6ES7460-3AA01-0AB0) and IM 461-3; (6ES7461-3AA00-0AA0, 6ES7461-3AA01-0AA0)
  • 6.5 The Interface Modules IM 460-4; ( 6ES7460- 4AA01- 0AB0) and IM 461-4; (6ES7461-4AA01-0AA0)
• 7 IM 463-2
  • 7.1 Using SIMATIC S5 Expansion Units in an S7-400
  • 7.2 Rules for Connecting S5 Expansion Units
  • 7.3 Operator Controls and Indicators
  • 7.4 Installing and Connecting the IM 463-2
  • 7.5 Setting the Operating Modes of the IM 314
  • 7.6 Configuring S5 Modules for Operation in the S7-400
  • 7.7 Pin Assignments of the 721 Connecting Cable
  • 7.8 Terminating Connector for IM 314
  • 7.9 Technical Specifications (6ES7463–2AA00–0AA0)
• 8 PROFIBUS DP Master Interface IM 467/ IM 467 FO
  • 8.1 PROFIBUS DP Master Interface IM 467/IM 467 FO
    • 8.1.1 Indicators and the Mode Selector
  • 8.2 Configuration
  • 8.3 Connection to PROFIBUS DP
    • 8.3.1 Bus Connector
    • 8.3.2 Optical Connection to PROFIBUS DP
    • 8.3.3 Connecting a Fiber-Optic Cable to the IM 467 FO
  • 8.4 Technical Specifications
    • 8.4.1 Technical Specifications of the IM 467
    • 8.4.2 Technical Specifications of the IM 467 FO
• 9 Cable Duct and Fan Subassemblies
  • 9.1 Fan Monitoring in the Fan Subassemblies
  • 9.2 Cable Duct; (6ES7408-0TA00-0AA0)
  • 9.3 The 120/230 VAC Fan Subassembly; (6ES7408-1TB00-0XA0)
  • 9.4 The 24 VDC Fan Subassembly; (6ES7408-1TA00-0XA0)
• 10 RS 485 Repeater
  • 10.1 Application and Characteristics (6ES7972-0AA01-0XA0)
  • 10.2 Appearance of the RS 485 Repeater; (6ES7972-0AA01-0XA0)
  • 10.3 RS 485 Repeater in Ungrounded and Grounded Operation
  • 10.4 Technical Specifications
• 11 CPUs for M7-400
  • 11.1 Performance Features
  • 11.2 Technical Specifications
  • 11.3 Function Elements
    • 11.3.1 Status and Fault LEDs
    • 11.3.2 Memory Cards
    • 11.3.3 Mode Selector Switch
    • 11.3.4 Submodule Receptacles for Interface Submodules
    • 11.3.5 Memory Submodules Suitable for the Main Memory
    • 11.3.6 Expansion Socket
    • 11.3.7 Multipoint Interface (MPI)
  • 11.4 The BIOS Setup
    • 11.4.1 BIOS Power Up
    • 11.4.2 BIOS Hot Keys
    • 11.4.3 Operator Inputs in the BIOS Setup
    • 11.4.4 Opening and Exiting the BIOS Setup
    • 11.4.5 Setup Page “User Help”
    • 11.4.6 Setup Page “IF modules”
    • 11.4.7 Setup Page “Timeout Function”
    • 11.4.8 Setup Page “Security”
    • 11.4.9 Setup Page “Date and Time”
    • 11.4.10 “Hard Disk” Setup Page
    • 11.4.11 Setup Page “Floppy/Card”
    • 11.4.12 Setup Page “Boot Options”
    • 11.4.13 Setup Page “System”
  • 11.5 I/O Addresses, Main Memory and Interrupt Assignments
• 12 M7-400 Expansions
  • 12.1 Overview
  • 12.2 EXM 478 Expansion Module; (6ES7 478-2AC00-0AC0)
    • 12.2.1 Addressing the EXM 478 Expansion Module
    • 12.2.2 Interrupt Assignments, Signal Switching EXM 478
    • 12.2.3 Technical Specifications of the EXM 478 Expansion Module
  • 12.3 ATM 478 AT Adapter Module; (6ES7 478-2CA00-0AC0)
    • 12.3.1 Pin Assignments of the AT Module
    • 12.3.2 Technical Specifications of the ATM 478 AT Adapter Module
  • 12.4 MSM 478 Mass Storage Module; (6ES7 478-2BA00-0AC0)
    • 12.4.1 LPT1 Parallel Port
    • 12.4.2 Technical Specifications of the MSM 478 Mass Storage Module
• 13 Interface Submodules
  • 13.1 Interface Submodules Overview
  • 13.2 Submodule IDs and Insertion Rules
  • 13.3 IF 962-VGA Interface Submodule for M7-300/400; (6ES7962-1BA00-0AC0)
    • 13.3.1 Pin Assignments
    • 13.3.2 Addressing, Interrupts, and Submodule ID
    • 13.3.3 Technical Specifications
  • 13.4 IF 962-COM Interface Submodule for M7-300/400; (6ES7962-3AA00-0AC0)
    • 13.4.1 Pin Assignments
    • 13.4.2 Addressing and Interrupts
    • 13.4.3 Technical Specifications
  • 13.5 IF 962-LPT Interface Submodule for M7-300/400; (6ES7962-4AA00-0AC0)
    • 13.5.1 Pin Assignments
    • 13.5.2 Addressing and Interrupts
    • 13.5.3 Technical Specifications
  • 13.6 IF 961-DIO Interface Submodule for M7-300/400; (6ES7961-1AA00-0AC0)
    • 13.6.1 Pin Assignments
    • 13.6.2 Addressing and Interrupts
    • 13.6.3 Technical Specifications
  • 13.7 IF 961-AIO Interface Submodule for M7-300/400; (6ES7961-2AA00-0AC0)
    • 13.7.1 Pin Assignments and Terminal Connection Diagram
    • 13.7.2 Connecting Measured Value Sensors to Analog Inputs
    • 13.7.3 Connecting Loads/Actuators to Analog Outputs
    • 13.7.4 Conversion Time and Cycle Time of the Analog Input Channels
    • 13.7.5 Conversion Time, Cycle Time, Settling Time, and Response Time of the Analog Output Channels
    • 13.7.6 Starting Up the IF 961-AIO Interface Submodule
    • 13.7.7 Addressing
    • 13.7.8 Analog Output Function
    • 13.7.9 Analog Input Function
    • 13.7.10 Analog Value Representation for the Measuring Ranges of the Analog Inputs
    • 13.7.11 Analog Value Representation for the Measuring Ranges of the Analog Outputs
    • 13.7.12 Diagnostics, Interrupts, and Submodule ID
    • 13.7.13 Technical Specifications
  • 13.8 IF 961-CT1 Interface Submodule for M7-300/400; (6ES7961-3AA00-0AC0)
    • 13.8.1 What Can the IF961-CT1 Interface Submodule Do?
    • 13.8.2 Addressing and Interrupts
    • 13.8.3 Technical Specifications
  • 13.9 IF 964-DP Interface Submodule for S7-400 and M7-400
    • 13.9.1 Pin Assignments
    • 13.9.2 Addressing and Interrupts
    • 13.9.3 Technical Specifications
• A Parameter Sets for Signal Modules
  • A.1 How to Assign the Parameters for Signal Modules in the User Program
  • A.2 Parameters of the Digital Input Modules
  • A.3 Parameters of the Digital Output Modules
  • A.4 Parameters of the Analog Input Modules
• B Diagnostic Data of the Signal Modules
  • B.1 Evaluating the Diagnostic Data of the Signal Modules in the User Program
  • B.2 Structure and Contents of Diagnostic Data Bytes 0 and 1
  • B.3 Diagnostic Data of the Digital Input Modules as of Byte 2
  • B.4 Diagnostic Data of the Digital Output Modules as of Byte 2
  • B.5 Diagnostic Data of the Analog Input Modules as of Byte 2
• C Spare Parts ans Accessories
• D Guidelines for Handling Electrostatic Sensitive Devices ( ESD)
  • D.1 What is ESD?
  • D.2 Electrostatic Charging of Persons
  • D.3 General Protective Measures Against Electrostatic Discharge Damage
• E List of Abbreviations
• Glossary
• Index
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • K
  • L
  • M
  • N
  • O
  • P
  • Q
  • R
  • S
  • T
  • U
  • V
  • W