Siemens Sitrans Lr 460 Users Manual JM01 LR460

2015-02-05

• Safety Notes
  • Safety marking symbols
• FCC and IC Conformity
  • US Installations only: Federal Communications Commission (FCC) rules
  • Canadian Installations only: Industry Canada (IC) rules
• The Manual
  • Support
• SITRANS LR 460
• Specifications
  • Power
  • Performance
  • Interface
  • Programmer (infrared keypad)
  • Mechanical
  • Environmental
  • Process
  • Communication
  • Approvals
  • Dimensions
    • Standard configuration
• Installation
  • Mounting Location
    • Key considerations
      • Nozzle design
      • Nozzle location
      • Device orientation
    • Installation in vessel with obstructions
      • Polarization Reference Point
    • Easy Aimer Installation
  • Air Purging System (Optional)
    • Universal Slotted Flange (for use with Air Purging Option only)
      • Slotted Flange Dimensions (see above)
  • Optional Dust Cap
    • Installation
• Wiring
  • Connecting SITRANS LR 460
    • HART wiring
      • Connecting HART
        • Typical PLC/mA configuration with HART
    • PROFIBUS wiring
      • Power Demands
      • Bus Termination
      • Connecting PROFIBUS PA
        • Typical PLC/mA configuration with PROFIBUS PA
  • Hazardous area installations
    • Product Nameplate
    • Instructions specific to hazardous area installations
      • SPECIAL CONDITIONS FOR SAFE USE
• Quick Start
  • Activating SITRANS LR 460
    • RUN mode display
  • Programming SITRANS LR 460
    • The handheld programmer and PROGRAM mode display
    • Quick Start Wizard via the handheld programmer
      • Operation types
    • Quick Start Wizard via SIMATIC PDM
      • Device Description (DD)
        • Configuring a new device
      • Quick Start Wizard steps
        • Step 1 - Identification
        • Step 2 - Application type
        • Step 3 - Range Setup
        • Step 4 - Summary
  • Level application example
  • Auto False Echo Suppression
• Operating SITRANS LR 460 via SIMATIC PDM
  • Functions in SIMATIC PDM
    • SIMATIC PDM Rev. 6.0, SP2 Features
      • Echo profile saving and viewing
      • Trend Diagram (Level Trend over Time)
      • Manual TVT Shaper
    • Accessing Functions in PDM
      • Online Display
    • Changing parameter settings via SIMATIC PDM
    • Configuring a new device
      • Device Description (DD)
    • Calibrating LR 460 via PDM
    • Parameters accessed via pull-down menus
      • Reset
        • Factory Defaults
        • Device Reset
      • Configuration Flag Reset (HART only)
      • Auto False Echo Suppression
      • D/A (Digital/Analog) Trim
      • Simulate AO (Analog Output)
      • Simulation
        • Simulate Analog Input to AIFB1 or AIFB2
        • Simulate Input
• Parameter Reference
  • Parameter menus
  • Pull-down menus via SIMATIC PDM
  • Quick Start Wizard
  • 1. Quick Start
    • 1.1. Language
    • 1.2. Application Type
    • 1.3. Operation
      • Operation types
    • 1.4. Units
    • 1.5. High Calibration Point
    • 1.6. Low Calibration Point
    • 1.7. Rate
    • 1.8. Apply Changes
  • 2. Identification
    • 2.1. Configuration
      • 2.1.2. Address
      • 2.1.3. Remote operation enable (REMLOCK)
      • 2.1.5. Reset
      • 2.1.6. Acknowledge Fault
      • 2.1.7. Menu Timer
      • 2.1.8. Backlight
    • 2.2. Device
      • 2.2.1. Software Revision
      • 2.2.2. Hardware Revision
      • 2.2.4. Write Locking
      • 2.2.5. Language
    • 2.3. Statistics
      • 2.3.1. Powered Hours
      • 2.3.2. Power-on Resets
  • 3. Input
    • 3.2. Standard Setup
      • 3.2.1. Antenna
      • 3.2.2. Response Rate
    • 3.3. Sensor Calibration
      • 3.3.1. Sensor Units
      • 3.3.2. Calibration Type
      • 3.3.3. Low Calibration Pt. (default 30.000 m)
      • 3.3.4. High Calibration Pt. (default 0.350 m)
      • 3.3.5. Unit (Level)
      • 3.3.6. Low Level Point (default 0.000)
      • 3.3.7. High Level Point (default 100.000)
      • 3.3.8. Level Offset (default 0.000)
      • 3.3.9. Sensor Offset (default 0)
      • 3.3.A. Temperature Units
    • 3.4. Measuring Limits
      • 3.4.1. Min. Measured Value (default 0.000)
      • 3.4.2. Max. Measured Value1
      • 3.4.3. Min. Sensor Value (default 0.000) - PROFIBUS PA only
      • 3.4.4. Max. Sensor Value (default 100.000) - PROFIBUS PA only
      • 3.4.5. Process Temperature Min.
      • 3.4.6. Process Temperature Max.
    • 3.5. Detailed Setup
      • 3.5.1. Fail-safe
      • 3.5.2. Echo select
      • 3.5.3. Echo Sampling
      • 3.5.4. Range
      • 3.5.6. TVT (Auto False Echo Suppression) setup
      • 3.5.7. Manual TVT shaper
      • 3.5.8. Rate
    • 3.6. Echo Information
      • 3.6.1. Level Transducer Block (LTB) Values (for diagnostic purposes)
      • 3.6.2. Echo Quality
  • 4. Output
    • 4.1. AIFB1
      • 4.1.1. Target Mode (PROFIBUS PA only)
      • 4.1.2. Unit
      • 4.1.3. Filter Time Constant
      • 4.1.4. Function
      • 4.1.5. Batch Information (PROFIBUS PA only)
      • 4.1.6. Process Value Scale
      • 4.1.7. Output Scale
      • 4.1.8. Output Limits
      • 4.1.9. Fail-safe Mode (PROFIBUS PA only)
      • 4.1.A. Human Interface
    • 4.2. AIFB2
    • 4.3. mA Output
      • 4.3.1. Function
      • 4.3.2. Out value
      • 4.3.3. Man Value
      • 4.3.4. Min Limit
      • 4.3.5. Max Limit
      • 4.3.6. FS Mode
      • 4.3.7. FS Value
      • 4.3.8. 4 mA Trim
      • 4.3.9. 20 mA Trim
    • 4.4. Relay Configuration
      • 4.4.1. AIFB
      • 4.4.2. Function
      • 4.4.3. NC/NO
      • 4.4.4. State
  • 6. Maintenance settings
    • 6.1. Remaining Device Lifetime
      • 6.1.1. Total Device Operating Time
      • 6.1.2. Remaining Device Lifetime
      • 6.1.3. Maintenance Required Limit
      • 6.1.4. Maintenance Demanded Limit
      • 6.1.5. Maintenance Alert Activation
      • 6.1.6. Total Expected Device Life
      • 6.1.7. Maintenance Status
      • 6.1.8. Acknowledge Status
      • 6.1.9. Acknowledge
    • 6.2. Remaining Sensor Lifetime
      • 6.2.1. Total Sensor Operating Time
      • 6.2.2. Remaining Sensor Lifetime
      • 6.2.3. Maintenance Required Limit
      • 6.2.4. Maintenance Demanded Limit
      • 6.2.5. Maintenance Alert Activation
      • 6.2.6. Total Expected Sensor Life
      • 6.2.7. Maintenance Status
      • 6.2.8. Acknowledge Status
      • 6.2.9. Acknowledge
    • 6.3. Service Interval
      • 6.3.1. Time Elapsed Since Last Service
      • 6.3.2. Maintenance Required Limit
      • 6.3.3. Maintenance Demanded Limit
      • 6.3.4. Maintenance Alert Activation
      • 6.3.5. Total Service Interval
      • 6.3.6. Maintenance Status
      • 6.3.7. Acknowledge Status
      • 6.3.8. Acknowledge
    • 6.4. Calibration Interval
      • 6.4.1. Time Elapsed Since Last Calibration
      • 6.4.2. Maintenance Required Limit
      • 6.4.3. Maintenance Demanded Limit
      • 6.4.4. Maintenance Alert Activation
      • 6.4.5. Total Calibration Interval
      • 6.4.6. Maintenance Status
      • 6.4.7. Acknowledge Status
      • 6.4.8. Acknowledge
• Appendix A: Technical Reference
  • Principles of Operation
  • Measurement Response
  • Echo Processing
    • Profile monitoring via SIMATIC PDM
      • Time Varying Threshold (TVT)
    • Echo selection
  • False Echoes
    • Beam angle at -3dB reference
    • Polarization reference point
    • Auto False-Echo Suppression
    • Near Range (Blanking)
  • Echo confidence
    • Loss of Echo (LOE)
      • LOE Timer
  • Fail-safe Mode
    • Fail-safe value
  • Maximum Process Temperature Chart
    • Maximum Flange and Process Temperatures versus Allowable Ambient for SITRANS LR 460
• Appendix B: Troubleshooting
  • General Fault Codes/PROFIBUS PA Extended Diagnostics
• Appendix C: Maintenance
  • Unit Repair and Excluded Liability
• Appendix D: Local Operation Interface
  • The LCD Display
    • RUN mode (startup display)
    • PROGRAM Mode Display
  • The handheld programmer
    • Hand-held programmer: key functions in RUN mode
    • PROGRAMMING via the handheld programmer
      • Hand-held programmer: key functions in Navigation mode
      • Hand-held programmer: key functions in Edit mode
      • Individual Parameter Reset
• Appendix E: HART Communications
  • HART Device Description (DD)
  • SIMATIC Process Device Manager (PDM)
    • HART modem interface for SIMATIC PDM
  • HART Version
    • Burst Mode
  • HART Communication Parameter
• Appendix F: HART Information Structure
  • Block Model for recording and processing measured values
    • Level Transducer Block (LTB)
    • Analog Input Function Blocks AIFB1 and AIFB2
    • Description of the blocks
• Appendix G: Remote operation via PROFIBUS PA
  • Configuration tool
    • SIMATIC PDM
      • Device Description
    • Configuration
      • The GSD file
      • Setting the PROFIBUS address
      • Configuring a new device: procedure
      • Configuring PROFIBUS PA with an S7-300/ 400 PLC
    • Calibration via SIMATIC PDM
• Appendix H: Communication via PROFIBUS PA
  • Cyclic versus Acyclic Data
    • Cyclic Data
  • Status Byte
  • Diagnostics
    • Diagnosis reply (applies only to cyclic masters)
    • Acyclic Diagnostics
    • Acyclic Extended Diagnostics (General Fault Codes)
  • Acyclic Data Transmission
• Appendix J: PROFIBUS PA Profile Structure
  • PROFIBUS Level Device Design
    • Block Model for recording and processing measured values
      • Level Transducer Block (LTB)
      • Analog Input Function Blocks AIFB1 and AIFB2
    • Description of the blocks
      • Level Transducer Block function groups
        • How the Level Transducer Block works:
        • Electronics temperature
      • Analog Input Function Blocks 1 and 2
        • Analog Input Function Block function groups (simulation, mode and status)
        • How the AIFBs work
        • Output Conversion
        • Device/ Input Simulation
        • Fail-safe
        • Device / Output Simulation
        • AIFB execution steps:
• Appendix K: Software Revision History
• Glossary
• Index
• LCD menu structure