Sierra Wireless AR8550 Wireless Modem User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1429308
Application ID	hGvK6OZXnEQrVwGcmyEUrQ==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	61.45kB (768131 bits)
Date Submitted	2011-03-10 00:00:00
Date Available	2011-09-06 00:00:00
Creation Date	2011-03-03 09:04:17
Producing Software	GPL Ghostscript 8.15
Document Lastmod	2011-03-03 09:04:17
Document Title	Microsoft Word - AirPrime AR Series Product Specification v0 7a.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	slan

Product Specification
AirPrime AR Series
Preliminary
0.6
December 10, 2010
Product Specification
Important Notice
Due to the nature of wireless communications, transmission and reception of data can never be
guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost. Although significant
delays or losses of data are rare when wireless devices such as the Sierra Wireless modem are used
in a normal manner with a well-constructed network, the Sierra Wireless modem should not be used
in situations where failure to transmit or receive data could result in damage of any kind to the user or
any other party, including but not limited to personal injury, death, or loss of property. Sierra Wireless
accepts no responsibility for damages of any kind resulting from delays or errors in data transmitted or
received using the Sierra Wireless modem, or for failure of the Sierra Wireless modem to transmit or
receive such data.
Safety and Hazards
Do not operate the Sierra Wireless modem in areas where blasting is in progress, where explosive
atmospheres may be present, near medical equipment, near life support equipment, or any equipment
which may be susceptible to any form of radio interference. In such areas, the Sierra Wireless modem
MUST BE POWERED OFF. The Sierra Wireless modem can transmit signals that could interfere with
this equipment. Do not operate the Sierra Wireless modem in any aircraft, whether the aircraft is on
the ground or in flight. In aircraft, the Sierra Wireless modem MUST BE POWERED OFF. When
operating, the Sierra Wireless modem can transmit signals that could interfere with various onboard
systems.
Note:
Some airlines may permit the use of cellular phones while the aircraft is on the ground and the door is
open. Sierra Wireless modems may be used at this time.
The driver or operator of any vehicle should not operate the Sierra Wireless modem while in control of
a vehicle. Doing so will detract from the driver or operator’s control and operation of that vehicle. In
some states and provinces, operating such communications devices while in control of a vehicle is an
offence.
Limitations of Liability
This manual is provided “as is”. Sierra Wireless makes no warranties of any kind, either expressed or
implied, including any implied warranties of merchantability, fitness for a particular purpose, or
noninfringement. The recipient of the manual shall endorse all risks arising from its use.
The information in this manual is subject to change without notice and does not represent a
commitment on the part of Sierra Wireless. SIERRA WIRELESS AND ITS AFFILIATES
SPECIFICALLY DISCLAIM LIABILITY FOR ANY AND ALL DIRECT, INDIRECT, SPECIAL,
GENERAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES INCLUDING,
BUT NOT LIMITED TO, LOSS OF PROFITS OR REVENUE OR ANTICIPATED PROFITS OR
REVENUE ARISING OUT OF THE USE OR INABILITY TO USE ANY SIERRA WIRELESS
PRODUCT, EVEN IF SIERRA WIRELESS AND/OR ITS AFFILIATES HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES OR THEY ARE FORESEEABLE OR FOR CLAIMS BY ANY
THIRD PARTY.
Notwithstanding the foregoing, in no event shall Sierra Wireless and/or its affiliates aggregate liability
arising under or in connection with the Sierra Wireless product, regardless of the number of events,
occurrences, or claims giving rise to liability, be in excess of the price paid by the purchaser for the
Sierra Wireless product.
Preliminary
Rev 0.6
December 10, 2010
Product Specification
Patents
This product may contain technology developed by or for Sierra Wireless Inc.
®
This product includes technology licensed from QUALCOMM 3G.
Manufactured or sold by Sierra Wireless Inc. or its Licensees under one or more patents licensed
from InterDigital Group.
Copyright
© 2010 Sierra Wireless. All rights reserved.
Trademarks
®
®
AirCard and Watcher are registered trademarks of Sierra Wireless. Sierra Wireless™, AirPrime™,
AirLink™, AirVantage™ and the Sierra Wireless logo are trademarks of Sierra Wireless.
®
®
®
®
®
, inSIM , WAVECOM , WISMO , Wireless Microprocessor ,
Wireless CPU®, Open AT® are filed or registered trademarks of Sierra Wireless S.A. in France and/or
in other countries.
®
®
Windows and Windows Vista are registered trademarks of Microsoft Corporation.
Macintosh and Mac OS are registered trademarks of Apple Inc., registered in the U.S. and other
countries.
QUALCOMM® is a registered trademark of QUALCOMM Incorporated. Used under license.
Other trademarks are the property of the respective owners.
Contact Information
Sales Desk:
Post:
Fax:
Web:
Phone:
1-604-232-1488
Hours:
8:00 AM to 5:00 PM Pacific Time
E-mail:
sales@sierrawireless.com
Sierra Wireless
13811 Wireless Way
Richmond, BC
Canada
V6V 3A4
1-604-231-1109
www.sierrawireless.com
Consult our website for up-to-date product descriptions, documentation, application notes, firmware
upgrades, troubleshooting tips, and press releases: www.sierrawireless.com
Preliminary
Rev 0.6
December 10, 2010
Product Specification
Document History
Version
Date
Updates
0.1
December 9, 2009
Creation
0.2
December 14, 2009
Updates for Preliminary release
Preliminary
Rev 0.6
December 10, 2010
Contents
1. OVERVIEW .......................................................................................................... 8
1.1.
Introduction ........................................................................................................................ 8
1.2.
Reference Specifications ................................................................................................... 8
2. FEATURES .......................................................................................................... 9
2.1.
Modes of Operation ........................................................................................................... 9
2.2.
Communications Functions ............................................................................................... 9
3. HARDWARE SPECIFICATION .......................................................................... 11
3.1.
Environmental Specification ............................................................................................ 11
3.2.
ESD Specification ............................................................................................................ 11
3.3.
Absolute Maximum Ratings............................................................................................. 11
4. RF SPECIFICATION .......................................................................................... 12
4.1.
GSM/WCDMA Interface .................................................................................................. 12
4.1.1.
GSM/WCDMA Antenna Interface ............................................................................ 12
5. GNSS SPECIFICATION ..................................................................................... 13
5.1.
GPS ................................................................................................................................. 13
6. BASEBAND SPECIFICATION ........................................................................... 14
6.1.
Power Supply .................................................................................................................. 14
6.2.
Current Consumption ...................................................................................................... 14
6.3.
USB ................................................................................................................................. 14
7. RF CIRCUIT ROUTING CONSTRAINTS ........................................................... 16
7.1.
General recommendations .............................................................................................. 16
8. REGULATORY APPROVAL .............................................................................. 18
Preliminary
Rev 0.6
December 10, 2010
List of Figures
Figure 1.
AR8550/8552 Block Diagram ............................................ Error! Bookmark not defined.
Figure 2.
Recommended UIM holder implementation .................................................................... 15
Figure 3.
AppCAD screenshot for MicroStrip design power mode diagram................................... 16
Figure 4.
RF routing examples ....................................................................................................... 17
Figure 5.
Coplanar clearance example........................................................................................... 17
Figure 6.
Antenna microstrip routing example ................................................................................ 17
Preliminary
Rev 0.6
December 10, 2010
List of Tables
Table 1:
AirPrime AR Series Intelligent Embedded Modules .......................................................... 8
Table 2:
Reference specifications ................................................................................................... 8
Table 3:
AR8552 modes of operation.............................................................................................. 9
Table 4:
AR8550 modes of operation.............................................................................................. 9
Table 5:
Communications functions ................................................................................................ 9
Table 6:
Environmental specifications ........................................................................................... 11
Table 7:
ESD ratings ..................................................................................................................... 11
Table 8:
Absolute Maximum ratings .............................................................................................. 11
Table 9:
GSM/WCDMA antenna characteristics – AR8550 .......................................................... 12
Table 10:
GSM/WCDMA antenna characteristics – AR8552 .......................................................... 12
Table 11:
Power supply requirements ............................................................................................. 14
Table 12:
Power supply pad ............................................................................................................ 14
Table 13:
USB pad details ............................................................................................................... 14
Table 14:
USB characteristics ......................................................................................................... 15
Preliminary
Rev 0.6
December 10, 2010
1. Overview
1.1.
Introduction
This document is the Hardware Product Specification for the AirPrime AR Series of Intelligent
Embedded Modules. It defines the high level product features and illustrates the interfaces for these
features. This document is intended to cover the hardware aspects of the product series, including
electrical and mechanical.
The AirPrime AR Series of Intelligent Embedded Modules are designed for the automotive industry
and any market with similar quality and life-time support requirements. They support several air
interface standards but share a common form-factor and electrical interface. All versions also have
Global Navigation Satellite System (GNSS) capabilities via GPS.
The AirPrime AR series of intelligent embedded modules are based on the Qualcomm MDM6200 and
MDM6600 wireless chipsets. The term AirPrime AR series addresses all of the following specific
products.
Table 1:
AirPrime AR Series Intelligent Embedded Modules
Product
Description
Band Support
AR8550
WCDMA/HSPA/GSM Intelligent Embedded Module
3G – BAND II, IV, V
2G – 850/900/1800/1900
AR8552
WCDMA/HSPA/GSM Intelligent Embedded Module
3G – BAND I, VIII, VI
2G – 850/900/1800/1900
1.2.
Reference Specifications
The table below lists the reference specifications for this product.
Table 2:
Reference specifications
Ref
Title
Rev
Issuer
[3]
Universal Serial Bus Specification
2.0
USB Implementers
Forum
[4]
Universal Serial Bus CDC Subclass Specification for Wireless
Mobile Communication Devices
1.0
USB Implementers
Forum
[5]
Universal Serial Bus Class Definitions for Communication Devices
1.1
USB Implementers
Forum
[6]
AirPrime AR Series LGA Specification
0.5
Sierra Wireless
[7]
AirPrime AR Series AT Command Interface Specification
006
Sierra Wireless
Preliminary
Rev 0.6
December 10, 2010
2. Features
This chapter highlights the features of the AirPrime AR Series of Intelligent Embedded Modules.
2.1.
Modes of Operation
The AR8550 supports quad band GSM operation and WCDMA/HSPA operation in Band II, IV and V.
The AR8552 supports quad band GSM operation and WCDMA/HSPA operation in Band I, VI and VIII.
All models also support Standalone GNSS operation. For complete details, refer to the tables below.
Table 3:
AR8552 modes of operation
Mode
GSM/GPRS/EDGE
WCDMA/HSPA
GNSS
Table 4:
Band
Frequency (MHz)
RX
TX
850
869 – 894
824 – 849
900
925 – 960
880 – 915
1800
1805 – 1880
1710 – 1785
1900
1930 – 1990
1850 – 1910
I (2100/IMT)
2110 – 2170
1920 – 1980
VI (800)
875 – 885
830 – 840
VIII (900/GSM)
925 – 960
880 – 915
GPS L1
1574.42 – 1576.42
---
AR8550 modes of operation
Mode
Band
GSM/GPRS/EDGE
Frequency (MHz)
RX
TX
850
869 – 894
824 – 849
900
925 – 960
880 – 915
1800
1805 – 1880
1710 – 1785
1900
1930 – 1990
1850 – 1910
II (1900/PCS)
1930 – 1990
1850 – 1910
WCDMA/HSPA
IV (1700/AWS)
2110 – 2155
1710 – 1755
V (850/CELL)
869 – 894
824 – 849
GNSS
GPS L1
1574.42 – 1576.42
---
2.2.
Communications Functions
The AirPrime AR series provides the following communications functions via the CDMA, GSM and/or
UMTS networks.
Table 5:
Communications functions
Communications Function
AR8550/AR8552
Voice
FR, EFR, HR, AMR, AMR-WB
Data
Preliminary
Circuit Switch (CSD)
Packet
Rev 0.6
December 10, 2010
Product Specification
Features
Communications Function
AR8550/AR8552
Short Message Service (SMS)
OTA
DTMF
Preliminary
OTAPA
OTASP
Forward link only
Rev 0.6
December 10, 2010
10
3. Hardware Specification
3.1.
Environmental Specification
The environmental specification for both operating and storage are defined in the table below.
Table 6:
Environmental specifications
Parameter
Temperature Range
-30°C to +75°C (Class A)
Ambient Operating Temperature
-40°C to +85°C (Class B)
Ambient Storage Temperature
-40°C to +90°C
Ambient Humidity
95% or less
3.2.
ESD Specification
The AirPrime AR series devices are sensitive to Electrostatic Discharge. ESD countermeasures and
handling methods must be used when handling the AirPrime AR series devices.
Table 7:
ESD ratings
Signal Pads
ESD Rating
Primary, Diversity and GNSS antenna pads
8 kV Contact
All other signal pads
1.5 kV Contact
3.3.
Absolute Maximum Ratings
This section defines the Absolute Maximum Ratings of the AirPrime AR series devices. If these
parameters are exceeded, even momentarily, damage may occur to the device.
Table 8:
Absolute Maximum ratings
Parameter
VBATT
Power Supply Input
Min
Max
Units
5.0
VIN
Voltage on any digital input or output pin
VCC_1v8+0.5
IIN
Latch-up current
-100
100
mA
Primary Antenna
30
Diversity Antenna
25
GNSS Antenna
25
Maximum Voltage applied to antenna interface pins
VANT
Preliminary
Rev 0.6
December 10, 2010
11
4. RF Specification
The section presents the RF interface of the AirPrime AR series intelligent embedded module. The
specifications for the CDMA and GSM/WCDMA interfaces are defined.
4.1.
GSM/WCDMA Interface
This section presents the GSM/GPRS/EDGE/WCDMA RF Specification for the AirPrime AR8550 and
AR8552.
4.1.1.
GSM/WCDMA Antenna Interface
The specification for the GSM/WCDMA Antenna Interface is defined in the table below.
Table 9:
GSM/WCDMA antenna characteristics – AR8550
Characteristics
GSM850 –
WCDMA
Band V
GSM900
GSM1800
GSM1900 –
WCDMA
Band II
WCDMA
Band IV
Frequency
(MHz)
TX
880 – 915
824-849
1710 – 1785
1850-1910
1710 – 1755
RX
925 – 960
869-894
1805 – 1880
1930-1990
2110 – 2155
Impedance
RF
50 Ohm
RX
1.5: 1
TX
1.5: 1
VSWR max
Maximum Voltage
Table 10:
Primary Antenna – 30 Volts
Diversity Antenna – 25 Volts
GSM/WCDMA antenna characteristics – AR8552
Characteristics
GSM900 –
WCDMA
Band VIII
Frequency
(MHz)
TX
Impedance
RX
1.5: 1
TX
1.5: 1
VSWR max
GSM1800
GSM1900
WCDMA
Band I
880 – 915
824-849
1710 – 1785
1850-1910
1920 – 1980
RX
925 – 960
869-894
1805 – 1880
1930-1990
2110 – 2170
RF
50 Ohm
Maximum Voltage
Preliminary
GSM850 –
WCDMA
Band VI
Primary Antenna – 30 Volts
Diversity Antenna – 25 Volts
Rev 0.6
December 10, 2010
12
5. GNSS Specification
The AirPrime AR series intelligent embedded module includes optional Global Navigation Satellite
System (GNSS) capabilities via the Qualcomm gpsOne Gen8 Engine, capable of operation in
assisted and stand-alone GPS modes.
5.1.
GPS
The GPS implementation supports GPS L1 operation centered at 1575.42 MHz (+/- 1 MHz).
Preliminary
Rev 0.6
December 10, 2010
13
6. Baseband Specification
6.1.
Power Supply
The AirPrime AR series is powered via a single regulated DC power supply, 4.0V +5/-10%. The
power supply requirements can be found in the following table.
Table 11:
Power supply requirements
Power Supply
Min
Typ
Max
Units
Main DC Power Input Range
3.6
4.0
4.2
0 to 1kHz
200
mVpp
>1kHz
50
mVpp
AR8550/8552
2.5
Power Supply Ripple
Maximum Current draw
AirPrime AR series does not support USB self powered operation.
Table 12:
Power supply pad
Pad
Name
Direction
Function
If Unused
S20
VBATT
Input
Power Supply Input
Required
6.2.
Current Consumption
The table below summarizes some key current consumption values for varies modes of the AR series
devices.
Device
Mode
On Call
AR8550 /
AR8552
Scan
Sleep Mode
All AR
Series
Off
6.3.
USB
Parameter
Typical
Max
Units
Maximum TX Output – WCDMA
800
mA
+0dBm TX Output – WCDMA
tbd
mA
GSM Low Band TX – PL5
tbd
mA
GSM High Band TX – PL
tbd
mA
Searching for network – WCDMA
46
mA
Searching for network – GSM
43
mA
On-network, "listening" for page – WCDMA
mA
On-network, "listening" for page – GSM
mA
Power OFF Current
3.6
10
µA
The AirPrime AR series has a High Speed USB2.0 compliant, peripheral only interface.
Table 13:
USB pad details
Pad
Name
Direction
Function
R1
USB_VBUS
Input
USB Power Supply
Preliminary
Rev 0.6
December 10, 2010
14
Product Specification
Pad
Baseband Specification
Name
Direction
Function
V1
USB_D_P
In/Out
Differential data interface positive
T1
USB_D_M
In/Out
Differential data interface negative
The AirPrime AR series will not be damaged if a valid USB_VBUS is supplied while the main DC
power is not supplied.
Table 14:
USB characteristics
USB
USB_VBUS
Figure 1.
Preliminary
Value
Units
Voltage range
2.0 – 5.25
Maximum Current draw
mA
Maximum Input Capacitance (Min ESR = 50 mOhm)
10
µF
Recommended UIM holder implementation
Rev 0.6
December 10, 2010
15
7. RF Circuit Routing Constraints
7.1.
General recommendations
To route the RF antenna signals, the following recommendations must be observed for PCB layout:
The RF signals must be routed using traces with a 50 Ω characteristic impedance.
Basically, the characteristic impedance depends on the dielectric constant (εr) of the material used,
trace width (W), trace thickness (T), and height (H) between the trace and the reference ground plane.
In order to respect this constraint, Sierra Wireless recommends that a MicroStrip structure be used
and trace width be computed with a simulation tool (such as AppCAD, shown in the figure below and
available free of charge at http://www.avagotech.com).
Figure 2.
AppCAD screenshot for MicroStrip design power mode diagram
The trace width should be wide enough to maintain reasonable insertion loss and manufacturing
reliability. Cutting out inner layers of ground under the trace will increase the effective substrate
height; therefore, increasing the width of the RF trace.
Caution: It is critical that no other signals (digital, analog, or supply) cross under the RF path. The figure below
shows a generic example of good and poor routing techniques.
Preliminary
Rev 0.6
December 10, 2010
16
Product Specification
RF Circuit Routing Constraints
Poor routing
Correct routing
The yellow traces cross the RF trace.
There is no signal around the RF path.
Figure 3.
RF routing examples
•
Fill the area around the RF traces with ground and ground vias to connect inner ground layers
for isolation.
•
Cut out ground fill under RF signal pads to reduce stray capacitance losses.
•
Avoid routing RF traces with sharp corners. A smooth radius is recommended.
•
The ground reference plane should be a solid continuous plane under the trace.
•
The coplanar clearance (G, below) from the trace to the ground should be at least the trace
width (W) and at least twice the height (H). This reduces the parasitic capacitance, which
potentially alters the trace impedance and increases the losses. Note the figure below shows
several internal ground layers cutout, which may not be necessary for every application.
Figure 4.
Coplanar clearance example
Figure 5.
Antenna microstrip routing example
Preliminary
Rev 0.6
December 10, 2010
17
8. Regulatory Approval
Important Notice
Because of the nature of wireless communications, transmission and reception of data can
never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost.
Although significant delays or losses of data are rare when wireless devices such as the Sierra
Wireless modem are used in a normal manner with a well-constructed network, the Sierra
Wireless modem should not be used in situations where failure to transmit or receive data could
result in damage of any kind to the user or any other party, including but not limited to personal
injury, death, or loss of property. Sierra Wireless and its affiliates accept no responsibility for
damages of any kind resulting from delays or errors in data transmitted or received using Sierra
Wireless modem, or for failure of the Sierra Wireless modem to transmit or receive such data.
Safety and Hazards
Do not operate you AR8550 modem:
•
•
•
•
•
In areas where blasting is in progress
Where explosive atmospheres may be present including refueling points, fuel
depots, and chemical plants
Near medical equipment, life support equipment, or any equipment which may be
susceptible to any form of radio interference. In such areas, the AR8550 modem
MUST BE POWERED OFF. Otherwise, the AR8550 modem can transmit
signals that could interfere with this equipment
In an aircraft, the AR8550 modem MUST BE POWERED OFF. Otherwise, the
AR8550 modem can transmit signals that could interfere with various onboard
systems and may be dangerous to the operation of the aircraft or disrupt the
cellular network. Use of cellular phone in aircraft is illegal in some jurisdictions.
Failure to observe this instruction may lead to suspension or denial of cellular
telephone services to the offender, or legal action or both.
Some airlines may permit the use of cellular phones while the aircraft is on the
ground and the door is open. The AR8550 modem may be used normally at this
time.
Important Compliance Information for USA OEM
Integrators
The AR8550 modem is granted with a modular approval for mobile applications. Integrators
may use the AR8550 modem in their final products without additional FCC/IC (Industry
Canada) certification if they meet the following conditions. Otherwise, additional FCC/IC
approvals must be obtained.
1. At least 20cm separation distance between the antenna and the user’s body must be
maintained at all times.
2. To comply with FCC/IC regulations limiting both maximum RF output power and human
exposure to RF radiation, the maximum antenna gain including cable loss in a mobileonly exposure condition must not exceed 5dBi for Cellular band and 3.7dBi for CDMA
PCS band.
3. The AR8550 modem and the antenna must not be co-located or operating in
conjunction with any other transmitter or antenna within a host device.
Preliminary
Rev 0.6
December 10, 20
Product Specification
4. A label must be affixed to the outside of the end product into which the AR8550 modem
is incorporated, with a statement similar to the following:
This device contains FCC ID: N7NAR8550
Contains transmitter module IC: 2417C-AR8550
where 2417C-AR8550 is the module’s certification number.
A user manual with the end product must clearly indicate the operating requirements and
conditions that must be observed to ensure compliance with current FCC/IC RF exposure
guidelines.
The end product with an embedded AR8550 modem may also need to pass the FCC Part 15
unintentional emission testing requirements and be properly authorized.
Note: If this module is intended for use in a portable device, you are responsible for separate
approval to satisfy the SAR requirements of FCC Part 2.1093 and IC RSS-102.
Preliminary
Rev 0.6
December 10, 20

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 19
Producer                        : GPL Ghostscript 8.15
Create Date                     : 2011:03:03 09:04:17
Modify Date                     : 2011:03:03 09:04:17
Title                           : Microsoft Word - AirPrime AR Series Product Specification v0 7a.docx
Creator                         : PScript5.dll Version 5.2.2
Author                          : slan

EXIF Metadata provided by EXIF.tools