Sierra Wireless M2113 GSM Modem User Manual Introduction to the Integra outstanding assets
Sierra Wireless, Inc. GSM Modem Introduction to the Integra outstanding assets
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 238752 |
| Application ID | dX93H9cWbnfLZbpZPwjfbQ== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 151.34kB (1891786 bits) |
| Date Submitted | 2002-04-24 00:00:00 |
| Date Available | 2002-04-24 00:00:00 |
| Creation Date | 2002-03-27 18:12:59 |
| Producing Software | Acrobat Distiller 5.0 (Windows) |
| Document Lastmod | 2002-03-28 12:17:35 |
| Document Title | Introduction to the Integra: outstanding assets |
| Document Creator | Acrobat PDFMaker 5.0 for Word |
| Document Author: | Sté WAVECOM |
March 2002/ version 1.6 Integra Version : 1.7 Date : March 2002 Reference : WM_Integra_UG_016 1/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra Level/ Indice 0.3 Date/ Date 1.2 1.3 1.4 Sept. 2000 Sept 2000 January 2001 August 2001 March 2002 March 2002 1.5 1.6 1.7 June 2000 History of the evolution / Historique des évolutions Creation and Correction Writer / Rédacteur Correction: figure 5 application note for serial link Application note for external SIM 3V/5V interface Minor formal modifications + addition of the specifications P. Calvez, S. Dechicha F. Doherier, T. Lapousterle, M. Nau, D. Martinez, B. Zenou S. Dechicha S. Dechicha mechanical M. Nau SIM3/5V electric scheme added + modification flat cable S. Marion reference Modifications to include 2C-2 module version Add RF exposure and OEM instructions Name / Nom Written by / Rédigé par B.Zenou Validated by / Validé par D. MARTINEZ Approved by / Approuvé P.Calvez par Function / Fonction Product Marketing N. Subiger O. Clerc Date/ Date Signature/ Signature June 2000 Modem Support Engineer June 2000 Product Marketing Senior June Manager 2000 2/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra Integra User’s Guide Hardware Specifications 3/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra Contents Introduction to the Integra: outstanding assets ........................................................................................................................7 1.1 Scope of the user’s guide ............................................................................................................ 7 1.2 General characteristics ................................................................................................................ 8 1.2.1 General ..................................................................................................................................... 8 1.2.2 Electrical ................................................................................................................................... 8 1.2.3 Physical .................................................................................................................................... 8 1.2.4 Basic Features.......................................................................................................................... 8 1.2.5 Interfaces.................................................................................................................................. 9 1.3 Mechanical Design Overview .................................................................................................... 10 Safety precautions ..................................................................................................................................................................................13 2.1 RF safety.................................................................................................................................... 13 2.1.1 General ................................................................................................................................... 13 2.1.2 Exposure to RF energy........................................................................................................... 13 2.1.3 Efficient modem operation......................................................................................................13 2.1.4 Antenna care and replacement .............................................................................................. 13 2.2 General safety ........................................................................................................................... 14 2.2.1 Driving..................................................................................................................................... 14 2.2.2 Electronic devices................................................................................................................... 14 2.2.3 Vehicle electronic equipment ................................................................................................. 14 2.2.4 Medical electronic equipment................................................................................................. 14 2.2.5 Aircraft .................................................................................................................................... 14 2.2.6 Children .................................................................................................................................. 14 2.2.7 Blasting areas......................................................................................................................... 14 2.2.8 Potentially explosive atmospheres ......................................................................................... 15 2.3 Safety standards........................................................................................................................ 15 Standard Compliance ............................................................................................................................................................................15 3.1 GSM compliance ....................................................................................................................... 15 3.2 FTA Compliance ........................................................................................................................ 16 3.2.1 IMEI Number .......................................................................................................................... 16 3.2.2 CE Label................................................................................................................................. 17 Hardware Interfaces...............................................................................................................................................................................18 4.1 Interfaces on the 50-pin general purpose connector................................................................ 18 4.1.1 The 50-pin connector description ........................................................................................... 18 4.1.2 Power supply .......................................................................................................................... 22 4.1.3 Serial link ................................................................................................................................ 24 4.1.4 ON / ~OFF .............................................................................................................................. 25 4.1.5 BOOT...................................................................................................................................... 27 4.1.6 Reset signal (~RST) ............................................................................................................... 28 4.1.7 Flashing LED .......................................................................................................................... 29 4/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 4.1.8 4.1.9 4.1.10 4.1.11 4.1.12 4.1.13 General Purpose Input/Output ............................................................................................... 29 Analog to Digital Converter ....................................................................................................29 Audio Interface........................................................................................................................ 31 SIM interface........................................................................................................................... 35 SPI bus ................................................................................................................................... 37 Keypad interface..................................................................................................................... 37 4.2 RF Interface ............................................................................................................................... 39 4.2.1 RF connector .......................................................................................................................... 39 4.2.2 RF performances.................................................................................................................... 39 4.3 SIM interface.............................................................................................................................. 39 Connector Supplier and Peripheral devices ............................................................................................................................ 40 5.1 Where to find the SMD connectors............................................................................................ 40 5.1.1 GSM Antenna ......................................................................................................................... 41 5.1.2 The SIM card holder ............................................................................................................... 42 Climatic and mechanical environment....................................................................................................................................... 42 Demonstration board ............................................................................................................................................................................ 43 General guidelines for the use of the Integra .......................................................................................................................... 44 8.1 Key information.......................................................................................................................... 44 8.1.1 Hardware and RF ................................................................................................................... 44 8.1.2 The Antenna ........................................................................................................................... 44 8.1.3 Firmware upgrade .................................................................................................................. 44 8.1.4 Getting started ........................................................................................................................ 45 Reference documents .......................................................................................................................................................................... 46 10 Acronyms and Abbreviations.............................................................................................................................................................47 11 Index 12 Annexes 53 48 12.1 Mechanical specifications....................................................................................................... 53 12.2 3V/5V SIM management ........................................................................................................ 54 12.3 AT command list..................................................................................................................... 54 13 RF exposure instructions ....................................................................................................................................................................59 14 Instructions to OEM ................................................................................................................................................................................60 5/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra Cautions: Information furnished herein by Wavecom are accurate and reliable. However no responsibility is assumed for its use. Please read carefully the safety precautions. If you have any technical questions regarding this document or the product described in it, please contact your distributor. General information about Wavecom and its range of products is available at the following internet address: http://www.wavecom.com Trademarks Some mentioned products are registered trademarks of their respective companies Copyright The Integra user’s guide is copyrighted by Wavecom SA with all rights reserved. No part of this user’s guide may be produced in any form without the prior written permission of Wavecom SA. No patent liability is assumed with respect to the use of the information contained herein. 6/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra Introduction to the Integra: outstanding assets Integra M2100 series integrated modem provides a quick and easy way to plug in GSM and GPRS functionality to systems and terminals. Available in dual-band configurations, this full type approved integrated modem constitutes a self-contained, fully integrated implementation of the GSM/GPRS standard. Thanks to standard interfaces, it can be integrated into any system which offers unlimited assets. It is ready for voice, SMS, data and fax. Integra is a product with a sole connector, which puts together all the interface signals in order to facilitate its integration. It has an integrated SIM connector as well as a standard RF connector type MMCX (Miniature Micro Connector). For system integrators, Integra is the fast track to the wireless world. 1.1 Scope of the user’s guide This document describes the hardware interface and the technical specifications of the Integra M2100 series modem. The integrated modem is referenced as Integra according to the GSM/GPRS 900 standard, the GSM/GPRS 1800 standard and the GSM/GPRS 1900 standard. This product is based on a Dual Band WISMOTM: every integrated modem referenced Integra-G900/1800 includes a GSM 900/1800 MHz module and every integrated modem referenced Integra-G900/1900 includes a GSM 900/1900 MHz module. This two dual-band modems have the same specifications unless otherwise specified. Integra has two version, one GSM only and one GSM/GPRS. The GSM and GSM/GPRS versions have the same specifications unless otherwise specified. 7/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 1.2 General characteristics 1.2.1 General • • • • • • • • • • • 1.2.2 Dual Band GSM/GPRS modem E-GSM 900/1800 or E-GSM 900/1900 Class 4 (2W at 900MHz) Class 1 (1W at 1800/1900 MHz) Small size and low power consumption Voice, SMS fax and data transmission without extra hardware Tricodec (FR/EFR/HR) Internal 3V SIM interface Easy remote control by AT commands for dedicated applications Fully Type Approved according to GSM Phase 2+ specifications Fully shielded and ready-to-use Electrical • • • • 1.2.3 Power supply: 5 VDC +/- 5% 1A 310 mA average in GSM 900 at Tx power max 2W 410 mA average in GSM/GRPS 900 at Tx power max 2W 9 mA in idle mode Physical • • • • • • • Absolute maximum dimension: 46 x 64 x 12 mm Weight: 90 g Volume: 36.21 cm3 Casing: Complete shielding-stainless steelMounting: 4 screw holes Operating temperature range: -20°C to + 55°C Storage temperature: -35°C to +85°C 1.2.4 Basic Features 1.2.4.1 telephony • • • Telephony (TCH/FS) & Emergency calls Full Rate, Enhanced Full Rate and Half Rate Dual Tone Multi Frequency function (DTMF) 8/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 1.2.4.2 • • • 1.2.4.3 • • • • 1.2.4.4 • • • 1.2.4.5 • • • • • • • • • 1.2.5 Text and PDU Point to point MT & MO SMS Cell Broadcast GSM circuit Data Features Data circuit asynchronous, transparent and non transparent up to 14,400 bits/s Automatic fax group 3 (Class 1 & 2) Alternate speech and fax MNP2, V.42bis GPRS Packet Data Features GPRS Class 2 Coding Schemes: C1S1 to CS4 Compliant with SMG31bis GSM Supplementary services Call Forwarding Call Barring Multiparty Call Waiting and Call Hold Calling Line Identity Advice of Charge USSD Closed User Group Explicit Call Transfer 1.2.4.6 • • • • • • • • Short Message Service (GSM and GPRS mode) Other features ME+SIM phone book management Fixed Dialling Number SIM Toolkit Class 2 SIM, network and service provider locks Real Time Clock Alarm management Software upgrade through Xmodem protocol UCS2 character set management Interfaces Single antenna interface Internal SIM interface: External SIM interface: 3V only 3V only for engineering sample. 3V or 5V for production unit For Data Operation: RS-232C serial link remote control by AT commands (GSM 07.07 and 07.05) baud rate from 300 to 115,200 bits/s from 300 up to 38400 bits/s with autobauding 9/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 1.3 Mechanical Design Overview Integra is encased as shown in the figure here-below. It includes a WISMO™ module, a 50-pin connector, a SIM holder and a RF connector. figure 1 : mechanical description 10/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra figure 2 : mechanical description II 4 screw holes allow the Integra to be fixed on the mother PCB. The Integra can be mounted indifferently on both sides (top or bottom). For further details see mechanical specifications in annex. 11/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra Note: Interfaces The integrated modem has a sole 50-pin connector which gathers all the interface signals in order to facilitate its integration. It has an integrated SIM card holder as well as a standard RF connector type MMCX (Miniature Micro Connector) The concept of the integrated modem has been defined to integrate on a sole device: • only one standard easy to find connector (worldwide supplied) gathering the analog and digital interfaces • one standard easy to find RF connector. See chapter RF connector page 34 • one SIM card holder. See chapter SIM interface 12/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 2 Safety precautions IMPORTANT FOR THE EFFICIENT AND SAFE OPERATION OF YOUR GSM INTEGRATED MODEM READ THIS INFORMATION BEFORE USE 2.1 RF safety 2.1.1 General Your Integra modem is based on the GSM standard for cellular technology. The GSM standard is spread all over the world. It covers Europe, Asia and some parts of America and Africa. This is the most used telecommunication standard. Your modem is actually a low power radio transmitter and receiver. It sends out and receives radio frequency energy. When you use your Integra integrated modem, the cellular system which handles your calls controls both the radio frequency and the power level of your cellular modem. 2.1.2 Exposure to RF energy There has been some public concern about possible health effects of using GSM modems. Although research on health effects from RF energy has focused on the current RF technology for many years, scientists have begun research regarding newer radio technologies, such as GSM. After existing research had been reviewed, and after compliance to all applicable safety standards had been tested, it has been concluded that the product was fitted for use. If you are concerned about exposure to RF energy there are things you can do to minimize exposure. Obviously, limiting the duration of your calls will reduce your exposure to RF energy. In addition, you can reduce RF exposure by operating your cellular modem efficiently by following the below guidelines. 2.1.3 Efficient modem operation For your modem to operate at the lowest power level, consistent with satisfactory call quality : If your modem has an extendible antenna, extend it fully. Some models allow you to place a call with the antenna retracted. However your modem operates more efficiently with the antenna fully extended. Do not hold the antenna when the modem is « IN USE ». Holding the antenna affects call quality and may cause the modem to operate at a higher power level than needed. 2.1.4 Antenna care and replacement Do not use the modem with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Replace a damaged antenna immediately. Consult your manual to see if you may change the antenna yourself. If so, use only a manufacturer-approved antenna. Otherwise, have your antenna repaired by a qualified technician. Use only the supplied or approved antenna. Unauthorized antennas, modifications or attachments could damage the modem and may contravene local RF emission regulations or invalidate type approval. 13/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 2.2 2.2.1 General safety Driving Check the laws and the regulations regarding the use of cellular devices in the area where you have to drive as you always have to comply with them. When using your modem while driving, please : give full attention to driving, pull off the road and park before making or answering a call if driving conditions so require. 2.2.2 Electronic devices Most electronic equipment, for example in hospitals and motor vehicles is shielded from RF energy. However RF energy may affect some improperly shielded electronic equipment. 2.2.3 Vehicle electronic equipment Check your vehicle manufacturer representative to determine if any on-board electronic equipment is adequately shielded from RF energy. 2.2.4 Medical electronic equipment Consult the manufacturer of any personal medical devices (such as pacemakers, hearing aids, etc...) to determine if they are adequately shielded from external RF energy. Turn your modem OFF in health care facilities when any regulations posted in the area instruct you to do so. Hospitals or health care facilities may be using RF monitoring equipment. 2.2.5 Aircraft Turn your modem OFF before boarding any aircraft. • Use it on the ground only with crew permission. • Do not use it in the air. To prevent possible interference with aircraft systems, Federal Aviation Administration (FAA) regulations require you to have permission from a crew member to use your modem while the aircraft is on the ground. To prevent interference with cellular systems, local RF regulations prohibit using your modem while airborne. 2.2.6 Children Do not allow children to play with your modem. It is not a toy. Children could hurt themselves or others (by poking themselves or others in the eye with the antenna, for example). Children could damage the modem, or make calls that increase your modem bills. 2.2.7 Blasting areas To avoid interfering with blasting operations, turn your unit OFF when in a « blasting area » or in areas posted : « turn off two-way radio ». Construction crew often use remote control RF devices to set off explosives. 14/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 2.2.8 Potentially explosive atmospheres Turn your modem OFF when in any area with a potentially explosive atmosphere. It is rare, but your modem or its accessories could generate sparks. Sparks in such areas could cause an explosion or fire resulting in bodily injuries or even death. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include fueling areas such as petrol stations ; below decks on boats ; fuel or chemical transfer or storage facilities ; and areas where the air contains chemicals or particles, such as grain, dust, or metal powders. Do not transport or store flammable gas, liquid, or explosives, in the compartment of your vehicle which contains your modem or accessories. Before using your modem in a vehicle powered by liquefied petroleum gas (such as propane or butane) ensure that the vehicle complies with the relevant fire and safety regulations of the country in which the vehicle is to be used. 2.3 Safety standards THIS INTEGRA COMPLIES WITH ALL APPLICABLE RF SAFETY STANDARDS. This cellular modem meets the standards and recommendations for the protection of public exposure to RF electromagnetic energy established by governmental bodies and other qualified organizations, such as the following : Directives of the European Community, Directorate General V in Matters of Radio Frequency Electromagnetic Energy 3 Standard Compliance 3.1 GSM compliance Reference regulations: TBR 19, TBR 20, TBR 31, TBR 32 Table 1 : Wavecom acceptance test Tests Performance Test Cooking Test Stress Test Vibration Test Vibration Test Shock Test Bump Test Humidity Test Applied Standard Acceptance Criteria ETSI recommendation for Full conformity to the recommendation regarding the main RF GSM/DCS parameters. communication. The test continues even after the Cooking Test milestone has been reached Therma shocks IEC 68-2- Full conformity to the recommendation regarding the main parameters. 14. Sinusoidal vibration IEC No performance degradation or mechanical degradation is allowed after 68-2-6. test. Random vibration IEC 68- No performance degradation or mechanical degradation is allowed after 2-36. test. IEC 68-2-27. No performance degradation or mechanical degradation is allowed after test. IEC 68-2-29. No performance degradation or mechanical degradation is allowed after test. Corrosion test IEC 68-2-3. No visible degradation of the product, both visual and functionnal. The unit is tested at room temperature and must be fully operative for the main RF parameters. 15/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra Warehouse Test Low temperance IEC 68- Under normal condition (room temperature) after the test, the unit must 2-1. behave in full conformity with the main RF parameters specification. Warehouse Test High temperature IEC 68- Under normal condition (room temperature) after the test, the unit must 2-2. behave in full conformity with the main RF parameters specification. Dust Test MIL-STD-810D, method No visible dust in the visible areas. No more than 50 dust particules in 510-3. the cabinet of the product. The unit, tested at room temperature must be fully operative. Light Test UV radiation and Visual inspection on the discoloration and other degradation effects temperature EDF such as cracks in the material of the unit after the test. HN60E03. Fall Test IEC 68-2-32. Only minor casing degradation is allowed, with a maximum dimension change of 1mm. The unit must remain fully operative and full specification for the main RF parameters. Electro Static IEC 1000-4-2. No performance degradation allowed after the test. Discharge Test Salt Mist Test IEC 68-2-11 After the test, visual inspection on the unit. Atmosphere Flowing mixed gas After the test, visual inspection on the unit and inside. Test corrosion. IEC 68-2-60 Marking Test EN 60 950 After the test, visual inspection on the unit. No degradation is allowed on the marking. 3.2 FTA Compliance The Integra has received a Full-Type Approval (according to normal MS requirements) in the configuration using the internal SIM interface. 3.2.1 IMEI Number GSM 900/1800: TAC: 5 000 64 FAC: 11 Serial Numbers: 000000 to 999999 GSM 900/1900: TAC: 500 100 FAC: 11 Serial Number: 000000 to 999999 GSM/GPRS 900/1800: TAC: 500161 FAC: 11 Serial Numbers: 000000 to 999999 GSM/GPRS 900/1900: TAC: 500167 FAC: 11 Serial Number: 000000 to 999999 16/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 3.2.2 CE Label The Integra integrated modem is CE compliant which implies that the modem is in conformity with the European Community directives and it bears the CE label Carrying out tests: Electro-magnetic field immunity EN 61000-4-3 ETS 300-342—1 Radiated emission EN 55022 ETS 300-342 ESD immunity EN 61000-4-2 ETS 300-342-1 17/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 4 Hardware Interfaces This chapter describes the hardware interfaces: • interfaces on the 50-pin general purpose connector • RF interface • SIM interface 4.1 4.1.1 Interfaces on the 50-pin general purpose connector The 50-pin connector description Table 2 : 50-pin connector description Pin # Name GND GND +5V +5V CT109/DCD GND GPIO4 I/O I/O type Supply Supply CMOS/2X I/O CMOS/2X 10 11 SPK2N CT125/RI SPK2P Flashing LED I/O Analog CMOS/2X Analog CMOS/2X 12 13 SPK1P CT106/CTS Analog 1X 14 15 16 SPK1N ON/~OFF MIC2P Analog 17 18 AUXV0 MIC2N Analog Analog 19 20 ~RST MIC1P Analog 21 22 GND MIC1N Analog 23 24 25 BOOT GND CT103/TX 26 GPIO0 I/O Analog CMOS/2X Description GROUND GROUND Comment High current High current High current High current RS232-Data Carrier Detect GROUND High current General Purpose I/O Speaker2 negative output RS232-Ring Indicator Speaker 2 positive output Working mode indication Led Speaker 1 positive output RS232 interface Clear To Send Speaker 1 negative output Power ON/OFF control Microphone 2 positive input Auxiliary ADC input Microphone 2 negative input Reset active low Microphone 1 positive input Ground Microphone 1 negative input BOOT GROUND RS232 interface - Transmit Driven by module ON = VCC(3) Open Collector Open Collector High current Pull up to VCC(3) with 100KΩ when not used General Purpose I/O 18/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra Pin # 27 Name CT107/DSR 28 29 CT104/RX CT108-2/DTR I 30 CT105/RTS 31 32 33 34 35 36 37 38 39 40 41 I/O I/O I/O I/O I/O I/O I/O I/O I/O I/O 1X 1X 1X 1X 1X 1X 1X 1X 1X 1X 42 43 44 45 46 47 COL3 COL4 COL1 COL2 ROW4 COL0 ROW2 ROW3 ROW0 ROW1 GND(1) NC(2) SPI_EN SPI_IO SPI_CLK SIMCLK SIMRST SIMVCC I/O 1X 1X 1X 2X 2X 48 SIMPRES1 49 50 I/O I/O type 1X 1X Description Comment RS232 interface Data Set Ready RS232 interface – Receive RS232 interface Pull up to VCC(3) Data Terminal Ready with 100KΩ when not used RS232 interface Pull up to VCC(3) Request To Send with 100KΩ when not used Keypad column Keypad column Keypad column Keypad column Keypad row Keypad column Keypad row Keypad row Keypad row Keypad row GROUND(1) High current No Connected(2) SPI enable I2 C Data or SPI Data I2 C Clock or SPI Clock Clock for SIM Interface 3V mode Reset for SIM interface 3V mode SIM card supply 3V mode 6mA max SIM card detect Connected to SIM connector pin 8. Pin 4 of SIM connector must be pulled down to GND with 1 KΩ* I/O for SIM interface 3V mode See (1) and (2) High current SIMDATA I/O 3X GND(1), GPO0(2)** (1) for engineering sample (2) for production unit. (3) VCC = application digital power supply either 5V or 2.8V *see SIM socket diagram 4.3 SIM interface ** GPO0 is a general purpose output for selection of external SIM 3V or 5V 19/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra Table 3 : operating conditions Parameter I/O type Min Max Vinput low CMOS -0.5 V 0.8 V Vinput high CMOS 2.1 V 3.0 V Voutput low 1X 0.2 V IOL = -1 mA 2X 0.2 V IOL = -2 mA 3X 0.2 V IOL = -3 mA Voutput high Condition 1X 2.6 V IOH = 1 mA 2X 2.6 V IOH = 2 mA 3X 2.6 V IOH = 3 mA 20/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra GND GND +5V +5V CT109/DCD GND GPIO4 SPK2N CT125/RI 10 SPK2P FLASHING LED 11 12 SPK1P CT106/CTS 13 14 SPK1N ON/~OFF 15 16 MIC2P AUXV0 17 18 MIC2N ~RST 19 20 MIC1P GND 21 22 MIC1N BOOT 23 24 GND CT103/Tx 25 26 GPIO0 CT107/DSR 27 28 CT104/Rx CT108-2/DTR 29 30 CT105/RTS COL3 31 32 COL4 COL1 33 34 COL2 ROW4 35 36 COL0 ROW2 37 38 ROW3 ROW0 39 40 ROW1 (2) 41 42 SPI EN SPI IO 43 44 SPI CLK SIMCLK 45 46 SIMRST SIMVCC 47 48 SIMPRES1 SIMDATA 49 50 GND(1), GPO0(2) (1) GND , NC (1) for engineering sample (2) for production unit figure 3 : 50-pin connector 21/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 50 49 figure 4 : pin numbering/bottom view 4.1.2 Power supply The main power supply is provided through a double connection. These connections are respectively the pin 3 and 4 for the +5V and the pins 1 and 2 for the ground (GND). The pins 6, 21, 24 and 40 are also ground connection in order to produce a proper ground plane. A 5V +/-5% - 1A power is strictly required to supply the modem. Otherwise, serious dysfunctions may appear. However, the modem does not have to constantly deliver 1A current at 5V on this power supply. This power supply is internally regulated to a nominal value VBATT. Table 4 : power supply pin description Pin number 21 24 41* 50* *for engineering sample Name GND GND +5 V +5 V GND GND GND GND GND Description Ground Ground Ground Ground Ground Ground Ground Ground Ground Comment High Current High Current High Current High Current High Current High Current High Current High Current High Current 22/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra Table 5 : Power consumption in EGSM only mode @ 25°C Conditions INOM IMAX +5V During TX bursts @ 2W 810 mA 1A +5V Average @ 2W 310 mA 370 mA +5V Average @ 0.5W 185 mA 200 mA +5V Average Idle mode 22 mA 25 mA +5V Average Idle with power saving 9.2 mA mechanism activated 10.5 mA Table 6 : Power consumption in GSM only 1800 and1900 mode @ 25°C Conditions INOM IMAX +5V During TX bursts @ 1W 635 mA 800 mA +5V Average @ 1W 260 mA 280 mA +5V Average @ 0.25W 150 mA 170 mA +5V Average Idle mode 20 mA 22 mA +5V Average Idle with power saving 9.2 mA mechanism activated 10.5 mA Table 7 : Power consumption in EGSM/GPRS cl2 mode @ 25°C Conditions INOM IMAX +5V During TX bursts @ 2W 810 mA 1A +5V Average @ 2W 310 mA 370 mA +5V Average @ 0.5W 185 mA 200 mA +5V Average in GPRS @ 2W 410 mA 490 mA +5V Average Idle mode 22 mA 25 mA +5V Average Idle with power saving 9.2 mA mechanism activated 10.5 mA 23/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra Table 8 : Power consumption GSM/GPRS cl2 1800 or 1900 mode @ 25°C 4.1.3 Conditions INOM IMAX +5V During TX bursts @ 1W 635 mA 800 mA +5V Average @ 1W 260 mA 280 mA +5V Average @ 0.25W 150 mA 170 mA +5V Average in GPRS @ 1W 360 mA 400 mA +5V Average Idle mode 20 mA 22 mA +5V Average Idle with power saving 9.2 mA mechanism activated 10.5 mA Serial link A serial link interface is available complying with V24 protocol signalling but not with V28 (electrical interface) due to a 2.8 Volts interface. TX, RTS and DTR can be either 5V or 3V. The signals are Tx data (CT103/TX), Rx data (CT104/RX), Request To Send (CT105/RTS), Clear To Send (CT106/CTS), Data Terminal Ready (CT108-2/DTR) and Data Set Ready (CT107/DSR). The set of RS232 signals can be required for GSM DATA services application. The 2 additional signals are Data Carrier Detect (CT109/DCD) and Ring Indicator (CT125/RI). Table 7 : Serial Link pin description Signal Pin number I/O I/O type* Description CT103 / TX 25 CMOS Transmit serial data CT104 / RX 28 1X Receive serial data CT105 / RTS 30 CMOS Ready To Send CT106 / CTS 13 1X Clear To Send CT107 / DSR 27 1X Data Set Ready CT108-2 / DTR 29 CMOS Data Terminal Ready CT109 / DCD CMOS / 2X Data Carrier Detect CT125 / RI CMOS / 2X Ring Indicator CT102/GND 21,24…** Ground *See Table 3 “operating conditions” in subdivision 4.1.1The 50-pin connector description ** Any of the available GND pins can be used 24/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra Modem Level Shifter 28 Terminal VCC 27 C1+ 25 C1- 26 C2+ GND VCC GND 3 C2- VCC RI 24 T1IN T1OUT DCD 23 T2IN T2OUT RX 22 T3IN T3OUT CTS 19 T4IN T4OUT DSR 17 T5IN T5OUT 16 DTR 21 R1OUTB R1IN R2IN R2OUT TX 20 RTS 18 VCC 13 ON R3IN S_RI S_DCD S_RX 10 S_CTS 12 S_DSR S_DTR S_TX 11 S_RTS R3OUT ERROR 15 R4OUT 14 VCC OFF MAX 3238 figure 5* : level shifter application diagram for serial link * This application note is valid for VCC ≥ 3.0Volt (see MAX3238 specifications). Auto shut down mode is not used in this example. 4.1.4 ON / ~OFF This input is used to switch ON or OFF the Integra modem. A high level signal has to be provided on the ON/~OFF pin to switch on the modem. The level of the voltage of this signal has to be maintained to VCC during a minimum time of 1 second. When powered off, the shutdown current is roughly 60 µA. 25/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra Table 8 : ON / OFF pin description Signal Pin number I/O I/O type* Description ON/∼OFF 15 CMOS Module Power ON/OFF *See Table 3 “operating conditions” in subdivision 4.1.1The 50-pin connector description 4.1.4.1 Power OFF procedure In order to power OFF the Integra, switch it OFF both via software (AT+CPOF, See AT commands user’s guide for more details) and via hardware line. See the diagram below. ON/~OFF Serial link to Integra AT+CPOF Serial Link from Integra OK response About 500 ms Integra Status ON OFF figure 6 : power OFF procedure 1 ON/~OFF Serial link to Integra Serial link from Integra Integra status AT+CPOF About 500 ms OK response About About 500 500ms ms ON OFF figure 7 : power OFF procedure 2 26/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 4.1.5 BOOT This input is used to switch the Integra into download mode (backup procedure). The internal boot procedure is started when this pin is low during the power ON of the module. In normal mode, this pin has to be left open. If used, this input has to be driven by an open collector or an open drain. See below an example of application diagram. See also the software upgrade procedure in General Guidelines chapter 8 BOOT : pin 23 Switch BOOT figure 8 : boot procedure If Switch Boot = 1, Boot pin 23 = 0, to download mode If Switch Boot = 0, Boot pin 23 = 1, to normal mode Table 9 : BOOT pin description Signal Pin number I/O I/O type* Description BOOT 23 CMOS SW downloading *See Table 3 “operating conditions” in subdivision 4.1.1The 50-pin connector description 27/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 4.1.6 Reset signal (~RST) This signal is used to force a reset of the Integra. It has to be used by providing low level during approximately 2ms. This signal has to be considered as an emergency reset only. A reset procedure is already driven by an internal hardware during the power-up sequence. This signal can also be used to provide a reset to an external device. If no external reset is necessary this input can be left open. If used (emergency reset), it has to be driven by an open collector or an open drain. See below an example of application diagram. Reset : pin 19 Switch reset figure 9 : reset procedure If switch Reset = 1, Reset pin 19 = 0 If switch Reset = 0, Reset pin 19 = 1 Table 10 : reset signal pin description Signal Pin number I/O ∼RST 19 I/O I/O type* Description Module Reset *See Table 3 “operating conditions” in subdivision 4.1.1The 50-pin connector description Table 11 : reset signal electrical characteristics Parameter Min Input Impedance ( R ) 4.7 Max Unit kΩ Input Impedance ( C ) 10 NF Table 12 : reset signal operating conditions Parameter Min Max *VT- 1.1V 1.2 V *VT+ 1.7V 1.9 V VOL VOH 0.4 V 2.0 V Condition IOL = -50 µA IOH = 50 µA VT-, VT+ : Hysterisis Level 28/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 4.1.7 Flashing LED The flashing LED signal is used to indicate the working mode of the Integra. Table 13 : the flashing LED pin description Signal Pin number I/O I/O type* Description Flashing LED 11 I/O CMOS/2X Working mode indication LED *See Table 3 “operating conditions” in subdivision 4.1.1The 50-pin connector description Table 14 : LED and Integra status LED status 4.1.8 Integra status OFF Download mode or switched OFF ON Permanent Switched ON, not registered on the network Slow flash Switched ON, registered on the network Quick flash Switched ON, registered on the network, communication in progress General Purpose Input/Output The Integra provides 2 General Purpose I/O. They are used to control any external device. Table 15 : General Purpose pin description Signal Pin number I/O I/O type* Description Default value GPIO0 26 I/O CMOS / 2X General Purpose 0 I/O GPIO4 I/O CMOS / 2X General Purpose 0 I/O *See Table 3 “operating conditions” in subdivision 4.1.1The 50-pin connector description All digital I/O comply with 3Volts CMOS. You can access (write or read) the GPIO value via AT+WIOW and AT+WIOR. See AT commands user’s guide for more details. 4.1.9 Analog to Digital Converter Analog to Digital converter (ADC) input is provided by the Integra. This converter is a 10 bits one, ranging from 0 to 2.5V. You can see the measurements via AT+ADC. See AT commands user’s guide for more details. 29/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra Table 16 : A/D converter pin description Signal Pin number I/O I/O type* Description AUXV0 17 Analog A/D converter *See Table 3 “operating conditions” in subdivision 4.1.1The 50-pin connector description description Table 17 : A/D converter electrical characteristics Parameter Min Resolution 10 bits Sampling rate 90.3 Ksps Input signal range ADC Reference Accuracy 0.5 Integral Accuracy +/- 1 LSB Differential Accuracy +/- 1 LSB Input Impedance ( R ) 10 MΩ Input Impedance ( C ) Max 2.5V 50 Unit pF 30/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 4.1.10 Audio Interface Two different microphone inputs and two different speaker outputs are supported. The connection can be either differential or single-ended but using a differential connection in order to reject common mode noise and TDMA noise is recommended. 4.1.10.1 Microphone 2 Inputs The MIC2 inputs are differential ones. They already include the convenient biasing for an electret microphone (0,5 mA and 2 Volts). This electret microphone can be directly connected on these inputs. The impedance of the microphone 2 has to be around 2kΩ. These inputs are the standard ones for a handset design while MIC1 inputs can be connected to an external headset or a handsfree kit. The gain of MIC2 inputs is internally adjusted. The gain can be tuned from 30dB to 51dB. The connection to the microphone is direct. The gain can be tuned using the AT+VGR command. See chapter Connector suppliers and peripheral devices. MIC2P C1 C1 = 22pF to 100pF 33 pF recommanded MIC2N figure 10 : microphone 2 input C1 has to be the nearest as possible to the microphone. Microphone manufacturers provide this capacitor directly soldered on the microphone. Table 18 : microphone 2 input pin description Signal Pin # I/O I/O type* Description MIC2P 16 Analog Microphone 2 positive input MIC2N 18 Analog Microphone 2 negative input *See Table 3 “operating conditions” in subdivision 4.1.1The 50-pin connector description 4.1.10.2 Microphone 1 Inputs The MIC1 inputs are differential and do not include internal bias. To use these inputs with an electret microphone, bias has to be generated outside the INTEGRA modem according to the characteristic of this electret microphone. These inputs are the standard ones used for an external headset or a handsfree kit. When using a single-ended connection, be sure to have a very good ground plane, a very good filtering as well as shielding in order to avoid any disturbance on the audio path. The gain of MIC1 inputs is internally adjusted. The gain can be tuned from 30dB to 51dB. The gain can be tuned using the AT+VGR command. Differential connection VCC analog power supply 2.8V R1 31/60 confidential © R2 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans MIC1P son autorisation préalable. C2 C1 March 2002/ version 1.6 Integra figure 11 : microphone 1 input R1 = R4 = from 100 to 330 Ω R2 = R3 = usually between 1KΩ and 3.3KΩ as per the microphone characteristics C1 = 22pF to 100pF C2 = 47µF R1 and R4 are used as a voltage supply filter with C2. C1 has to be the nearest possible to the microphone. Microphone manufacturers provide this capacitor directly soldered on the microphone. Table 19 : microphone 1 input pin description Signal Pin # I/O I/O type* Description MIC1P 20 Analog Microphone 1 positive input MIC1N 22 Analog Microphone 1 negative input *See Table 3 “operating conditions” in subdivision 4.1.1The 50-pin connector description 32/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 4.1.10.3 Speaker 2 Outputs Speaker outputs SPK2 are push-pull amplifiers and can be loaded down to 50 Ohms and up to 1nF. These outputs are differential and the output power can be adjusted by step of 2dB. The output can be directly connected to a speaker. When using a single-ended connection, be sure to have a very good ground plane, a very good filtering as well as shielding in order to avoid any disturbance on the audio path. Differential Connection SPK2P SPK2N Single-ended Connection C1 SPK2P figure 12 : speaker 2 output C1 = from 100nF to 47µF as per the speaker characteristics and the output power. Using a single-ended connection also includes losing half of the output power compared to a differential connection. Table 20 : speaker 2 output pin description Signal Pin # I/O I/O type* Description SPK2P 10 Analog Speaker 2 positive output SPK2N Analog Speaker 2 negative output *See Table 3 “operating conditions” in subdivision 4.1.1The 50-pin connector description 33/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 4.1.10.4 Speaker 1 Outputs Speaker outputs SPK1 are push-pull amplifiers and can be loaded down to 50 Ohms and up to 1nF. These outputs are differential and the output power can be adjusted by step of 2dB. The output can be directly connected to a speaker. When using a single-ended connection, be sure to have a very good ground plane, a very good filtering as well as a shielding in order to avoid any disturbance on the audio path. Differential Connection SPK1P SPK1N Single-ended Connection C1 SPK1P figure 13 : speaker 1 output C1 = from 100nF to 47µF as per the speaker characteristics. Using a single-ended connection also includes losing half of the output power compared to a differential connection. Table 21 : speaker 1 output pin description Signal Pin # I/O I/O type* Description SPK1P 12 Analog Speaker 1 positive output SPK1N 14 Analog Speaker 1 negative output *See Table 3 “operating conditions” in subdivision 4.1.1The 50-pin connector description 34/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 4.1.11 SIM interface The external SIM interface is available through the 50-pin connector in order to use a stand-alone SIM card holder. This interface is 3V only on the engineering samples. 5V SIMs can be driven with production unit using an external level shifter. SIM line must not exceed 15 cm. see also “General guidelines” chapter 8 5 signals are available: SIMVCC: SIM power supply. SIMRST: reset. SIMCLK: clock. SIMDATA: I/O port. SIMPRES1 SIM card detect. This signal is connected to the external SIM connector on pin 8. Pin 4 of SIM connector must be pulled down to GND with 1 KΩ. This interface is fully compliant with GSM 11.11 recommendations concerning the SIM functionality. Transient Voltage Suppressor diodes are internally added on the signals connected to the SIM socket in order to prevent any Electro-Static Discharge. TVS diodes with low capacitance (less than 10pF) are connected on SIMCLK and SIMDATA to avoid any disturbance of the rising and falling edge. Table 22 : SIM interface pin description Signal Pin number I/O I/O type* Description SIMCLK 45 2X SIM Clock SIMRST 46 2X SIM Reset SIMDATA 49 I/O CMOS / 3X SIM Data SIMVCC 47 SIMPRES1 48 CMOS SIM Card Detect GPO0** 50 2X SIM 3V or 5V SIM Power Supply *See Table 3 “operating conditions” in subdivision 4.1.1The 50-pin connector description ** for production units See application schematics in annex for 3V/5V SIM management 35/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra Table 23 : SIM interface electrical characteristics Parameter Conditions Min SIMDATA VIH IIH = ± 20µA 0.7xSIMVCC SIMDATA VIL IIL = 1mA SIMRST, SIMDATA SIMCLK VOH SIMRST, SIMDATA SIMCLK VOL Source 20µA Typ Max 0.3xSIMVCC current Unit = SIMVCC – 0.1V 0.1 2.85 SIMCLK Rise/Fall Loaded with 30pF Time 50 ns SIMRST, SIMDATA Rise/Fall Time Loaded with 30pF µs SIMCLK Frequency Loaded with 30pF 3.25 MHz SIMVCC Voltage Sink current = - 200µA Output ISIMVCC <= 6mA 2.70 2.80 Table 24 : SIM socket pin description Signal VCC RST CLK CC4 GND VPP I/O CC8 Pin number Description SIMVCC SIMRST SIMCLK R10 to GROUND GROUND Not connected SIMDATA SIMPRES1 36/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra SIMVCC SIMRST 2 RST 3 CLK SIMCLK GND VCC CC4 1K GND VPP SIMDATA SIMPRES1 I/O CC8 Figure 14: SIM socket 4.1.12 SPI bus The SPI bus includes a CLK signal, an I/O signal and an EN signal complying with SPI bus standard. The maximum speed transfer is 3.25Mb/s. Table 25 : SPI Bus pin description Signal Pin number I/O I/O type* Description SPI_CLK 44 1X SPI Serial Clock SPI_IO 43 I/O CMOS / 1X SPI Data SPI_EN 42 1X SPI Enable *See Table 3 “operating conditions” in subdivision 4.1.1The 50-pin connector description 4.1.13 Keypad interface This interface provides 10 connections : 5 rows (R0 to R4) and 5 columns (C0 to C4). The scanning is a digital one, and the debouncing is done in the integrated modem. No discrete components like R,C (Resistor, Capacitor) are needed. It is possible to scan the column and rows using the: AT+ CMER. command. See AT command user’s guide for more details. 37/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra Table 26 : keypad interface pin description Signal Pin number I/O I/O type* Description ROW0 39 I/O CMOS / 1X Row scan ROW1 40 I/O CMOS / 1X Row scan ROW2 37 I/O CMOS / 1X Row scan ROW3 38 I/O CMOS / 1X Row scan ROW4 35 I/O CMOS / 1X Row scan COL0 36 I/O CMOS / 1X Column scan COL1 33 I/O CMOS / 1X Column scan COL2 34 I/O CMOS / 1X Column scan COL3 31 I/O CMOS / 1X Column scan COL4 32 I/O CMOS / 1X Column scan *See Table 3 “operating conditions” in subdivision 4.1.1The 50-pin connector description 38/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 4.2 RF Interface The impedance is 50 Ohms nominal. 4.2.1 RF connector The RF connector is MMCX (Miniature Micro Connector) standard type. An antenna can be directly connected through the matting connector or using a small adaptor. See also paragraph on GSM antenna. 4.2.2 RF performances RF performances are compliant with the ETSI recommendation 05.05 and 11.10. The main parameters are : • Receiver: • EGSM Sensitivity : < -104 dBm • GSM 1800/GSM 1900 Sensitivity : < -102 dBm • Selectivity @ 200 kHz : > +9 dBc • Selectivity @ 400 kHz : > +41 dBc • Dynamic range : 62 dB • Intermodulation : > -43 dBm • Co-channel rejection : + 9 dBc Transmitter : • Maximum output power (EGSM) : 33 dBm +/- 2 dB • Maximum output power (DCS/PCS) : 30 dBm +/- 2 dB • Minimum output power (EGSM): 5 dBm +/- 5 dB • Minimum output power (DCS/PCS): 0 dBm +/- 5 dB • H2 level : < -30 dBm • H3 level : < -30 dBm • Noise in 925 - 935 MHz : < -67 dBm • Noise in 935 - 960 MHz : < -79 dBm • Noise in 1805 - 1880 MHz : < -71 dBm • Phase error at peak power : < 5 ° RMS • Frequency error : +/- 0.1 ppm max 4.3 SIM interface The internal SIM interface of the Integra supports 3V SIMs only. The part number reference of the SIM card holder supplier is MOLEX 91228-0002 The part number reference of the SIM receptacle supplier is MOLEX 91236-0002 See also subdivision The SIM card holder. 39/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 5 Connector Supplier and Peripheral devices 5.1 Where to find the SMD connectors The Integra matting interface connector is made by SAMTEC France (http://www.samtec.com/). Many SAMTEC products are available via SAMTEC dealers throughout the world. The connectors data sheets are available in annex of this document. Figure 15: high and low profile CLP connectors Part number : FFSD-20-S-10-01-N Figure 16: flexible flat cable Part number : FLE 125 01LDVA Figure 17: flex cable connector 40/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 5.1.1 GSM Antenna The integrated modem antenna connector is a MMCX connector. The MMCX connector incorporates a 'Snap On' latching action in order to make the connection easier with an excellent RF performance. An additional advantage is its small physical size which is 50% of the standard MCX connector. This type of connector is suitable for the standard ranges of flexible and semi-rigid cables. The characteristic impedance of the MMCX coaxial connector is 50 ohm. The antenna manufacturer must guarantee that the antenna will be working according to the following radio characteristics: Table 27 : radio characteristics Frequency RX Frequency TX RF power stand Impedance EGSM 900 925 to 960 MHz 880 to 915 MHz 2W at 12.5 % duty cycle GSM 1800 1805 to 1880 MHz 1710 to 1785 MHZ 1W at 12.5 % duty cycle 50 Ω <2 VSWR Typical gain radiated GSM 1900 1930 to 1990 MHz 1850 to 1910 MHz 1W at 12.5 % duty cycle 0 dBi on azimuth plane The Integra requires an MMCX (Miniature Micro Connector) plug to connect an antenna Figure 18: MMCX connector example (right angle) An antenna with matting connector can be ordered, for example, from : IMS Connectors Systems GMBH Obere Hauptstrasse 30 D-79843 Löffingen Germany Tel : +49 76 54 90 10 Fax : +49 76 54 90 11 99 http://www.imscs.com/ or using a small MMCX / SMA adaptor can be ordered, for example, from : Amphenol Socapex http://www.amphenol.com/ Order N° : 908-31100 41/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 5.1.2 The SIM card holder The SIM card holder used in the integrated modem is a MOLEX connector. Part number connector: 99228-0002 Part number holder : 91236-0002 For more information about this connector : http://www.molex.com/ It is possible to use a stand-alone SIM card holder through the 50-pin connector (the length of the SIM line must not exceed 15 cm). 6 Climatic and mechanical environment Table 28 : climatic and mechanical environment WM2C-G900/G1800 ENVIRONNEMENTAL CLASSES TYPE OF TEST STANDARDS STORAGE Class 1.2 TRANSPORTATION Class 2.3 Cold IEC 68-2.1 Ab test -25° C 72 h -40° C 72 h -20° C (GSM) -10° C (DCS) Dry heat IEC 68-2.2 Bb test +70° C 72 h +70° C 72 h +55° C Change of temperature IEC 68-2.14 Na/Nb test Damp heat cyclic IEC 68-2.30 Db test +30° C 2 cycles 90% - 100% RH variant 1 +40° C 2 cycles 90% - 100% RH variant 1 +40° C 2 cycles 90% - 100% RH variant 1 Damp heat IEC 68-2.56 Cb test +30° C +40° C +40° C Sinusoidal vibration IEC 68-2.6 Fc test 5 - 62 Hz : 5 mm / s 62 - 200Hz : 2 m / s2 3 x 5 sweep cycles Random vibration wide band IEC 68-3.36 Fdb test -40° / +30° C 4 days 5 cycles t1 = 3 h 4 days 5 - 20 Hz : 0.96 m2 / s3 20 - 500Hz : - 3 dB / oct 3 x 10 min OPERATING (PORT USE) Class 7.3 16 h 16 h 16 h -20° / +30° C (GSM) 3 cycles -10° / +30° C (DCS) 3 cycles t1 = 3 h 4 days 10 -12 Hz : 0.96 m2 / s3 12 - 150Hz : - 3 dB / oct 3 x 30 min 42/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra Demonstration board Download Flashing LED Test connector RS 232 serial link Power Supply 5V only/1 A Audio RJ 9 Handset and handsfree Flex connector ON/OFF Reset Keypad WMOi3 Integrated Modem SIM Card Holder Antenna Connector Figure 19: Integra demoboard description The Wavecom demonstration board (“demoboard”) is manufactured by Wavecom. It can be ordered from Wavecom or directly from your distributor. 43/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 8 General guidelines for the use of the Integra 8.1 8.1.1 Key information Hardware and RF • • • • • • 8.1.2 Ground plane: Wavecom recommends to have a common ground plane for analog, digital and RF grounds. Length of the SIM interface lines (15 cm maximum) Bias of the Microphone inputs must be properly adjusted when using audio connectors (mic + speaker) 1. EMC protection on audio input/output (filters against 900 MHz) ESD protection on serial link,… Possible spurious emission radiated by the application to the RF receiver in the receiver band The Antenna The antenna sub-system and integration in the application is a major issue. It is a major issue in the choice of the antenna cable ( type, length, performances, thermal resistance, etc.) These elements could affect GSM performances such as sensitivity and emitted power. The antenna should be isolated as much as possible from the digital circuitry including the interface signals. It is recommended to shield the terminal. On terminals including the antenna, a poor shielding could dramatically affect the sensitivity of the terminal. Subsequently, the power emitted through the antenna could affect the application. 8.1.3 Firmware upgrade The Integra firmware is stored in flash memory and it can easily be upgraded. Two upgrade procedures are available: • one (nominal) procedure based on the Xmodem protocol (AT+WDWL command) • one emergency mode (backup procedure) based on a Wavecom specific downloader 8.1.3.1 Nominal upgrade procedure The firmware file can be downloaded into the modem using the Xmodem protocol. To enter this mode, the AT+WDWL command (see description in the AT command manual) has to be sent to the Integra. The necessary serial signals to proceed with the Xmodem downloading are: Rx, Tx, RTS, CTS, GND. 44/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 8.1.3.2 backup procedure In case the nominal upgrade mode is not possible (due to critical corruption on the flash memory), a backup procedure is also available. It requires a WAVECOM specific software to download the firmware file into the modem. This tool has to run on a PC connected to the serial bus of the modem. As this procedure is very specific and needs Wavecom tools, this process has to be executed by your distributor. The necessary signals to proceed with the downloading are: Rx, Tx, RTS, CTS, GND. Prior to running the WAVECOM downloader, the modem has to be set in download mode. For this, the BOOT signal has to be set to low while powering ON (or reseting) the modem. The application must support serial speed changes, up to 115,200 bps and hardware flow control. 8.1.4 8.1.4.1 Getting started Minimum hardware interface to get started As a minimum, it is necessary to connect the following signals to properly operate the Integra : Table 29 : minimum signals to operate the Integra Pin number Name GND GND +5V +5V GND 13 CT106/CTS 15 ON/OFF 21 GND 24 GND 25 CT103/TX 28 CT104/RX 30 CT105/RTS * connected to +5V for example Description GROUND GROUND Power supply Power supply GROUND Clear To Send Power On/OFF* GROUND GROUND Transmit Receive Request To Send The serial link signals must be used through the implementation of the serial link level shifter. See figure 5 : level shifter application diagram for serial link 8.1.4.2 Terminal emulator setup Here below is an example based on the WindowsTM Hyperterminal application (terminal emulator program). Setup: START – PROGRAMS – ACCESSORIES – HYPERTERMINAL , then Start the software HYPERTRM Give the name of your choice, click on the icone of your choice, then click “OK”, then choose: Connect using : direct to COM1 Properties : choose 9600 bps – 8 bits data – no parity – 1 stop bit – hardware flow control Click “OK” Once Hyperterminal is open and configured, it can be used to send AT commands to the Integra. Please see the “Informative Example” annex in the AT command user’s guide to test your Integra. 45/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 9 Reference documents Table 31 : GSM ETSI recommendations for Phase I and Phase II. Specification Reference GSM ph2 Radio DCS ph2 Radio GSM ph2 Link-Management GSM ph2 Link-Management GSM ph2 Layer 2 GSM ph2 Layer 3 DCS ph2 Layer 3 GSM/DCS Multiband GSM ph2 SIM GSM ph2 Teleservices GSM ph2 Miscellaneous DCS ph2 Miscellaneous Title ETSI GSM 05.05 and GT 01 v4.2.1 ETSI GSM05.05 and GT01 v4.2.1 ETSI GSM 03.06, 04.08, 05.05, 05.08, 05.10, 07.01 and GT 01 v4.2.1 ETSI GSM 03.06, 04.08, 05.05, 05.08, 05.10, 07.01 and GT 01 v4.2.1 ETSI GSM 04.06 and GT 01 v4.2.1 ETSI GSM 04.08 and GT 01 v4.2.1 ETSI GSM 04.08 and GT 01 v4.2.1 ETSI GSM 02.07, 03.22, 04.08, 04.13, 05.05, 05.08 and GT 01 v4.2.1 ETSI GSM 11.11 and GT 01 v4.2.1 ETSI GSM 03.50 and GT 01 v4.2.1 ETSI GSM 02.07, 03.40, 03.41, 04.08, 04.10, 04.11, 06.10, 06.11, 06.1 06.31, 06.32, 07.01, 09.07 and GT 01 v4.2.1 ETSI GSM 02.07, 03.40, 03.41, 04.08, 04.10, 04.11, 06.10, 06.11, 06.1 06.31, 06.32, 07.01, 09.07 and GT 01 v4.2.1 You can find the documents on ETSI Contacts: ETSI Secretariat F-06921 Sophia Antipolis cedex, France e-mail: secretariat@etsi.fr http://www.etsi.org 46/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 10 Acronyms and Abbreviations ADC : Analog Digital Converter ASIC : Application Specific Integrated Circuit BCCH : Broadcast Control Channel CE : Communauté Européenne CLK : Clock CTS : Clear To send dB : decibel DCD : Data Carrier Detect DCE : Data Circuit Terminating Equipment DSR : Data Set Ready DTE : Data Terminal Equipment DTR : Data Terminated Ready EFR : Enhanced Full Rate E-GSM : Extended- GSM EMC : Electromagnetic Conformity EN : Enable ETSI : FAC : Final Assembly Code FR : Full-Rate FTA : Full Type Approval GND : Ground GPIO : General Purpose Input Output GPRS : General Packet Radio Service GSM : Global System for Mobile Communication HR : Half-Rate IMEI : International Mobile Equipment Identity MO : Mobile Originated MT : Mobile Terminated OEM : Original Equipment Manufacturer PDA : Personal Digital Assistant PCB : Printed Circuit Board PRES : Presence RI : Ring Indicator RTS : Request To Send SIM : Subscriber Identity Module SMD : Surface Mounted Design SMS : Short Message Service TAC : Type Approval Code TDMA : Time Code Multiple Access TE : Terminal Equipment VSWR : Voltage Standing Wave Ratio WAP : Wireless application Protocol 47/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 11 Index 2X, 19, 20, 22, 23, 27, 34, 41 Advice of Charge, 9 analog, 12, 52 Analog, 19, 20, 34, 35, 36, 38, 39, 40, 66 antenna, 9, 13, 14, 15, 46, 48, 49, 52 antenna cable, 52 asynchronous, 9 AT commands, 8, 9, 63 AT+ CMER, 44 AT+CPOF, 29 autobauding, 9 AUXV0, 20, 35 Easy remote control, 8 Echo, 63, 65 EFR, 8, 56 EMC protection, 52 Emergency calls, 8 ESD protection, 52 ETSI, 16, 46, 55 Explicit Call Transfer, 9 fax, 7, 8, 9 Fixed Dialling Number, 9 Flash LED, 20 FR, 8, 56 baud rate, 9 BOOT, 20, 31 bursts, 26 Call Barring, 9 Call Forwarding, 9 Call Hold, 9 Call Waiting, 9 Calling Line Identity, 9 Casing, 8 CE, 18, 56 Cell Broadcast, 9 Class 1, 8, 9 Class 4, 8 Closed User Group, 9 CMOS, 19, 20, 23, 27, 29, 31, 34, 41, 44, 45 column, 21, 44 connector, 7, 10, 12, 19, 22, 27, 29, 31, 32, 33, 34, 35, 36, 38, 39, 40, 41, 44, 45, 46, 47, 48, 49 converter, 34, 35 gain, 36, 37, 48, 66 general purpose, 19 General Purpose, 19, 20, 34 GND, 25 GND, 19, 20, 21, 22, 25, 27, 41, 43, 56 GPIO, 66 GPRS, 56 Ground plane, 52 GSM, 7, 8, 9, 13, 16, 27, 41, 48, 52, 55, 56 handset, 36 hardware, 7, 8, 19, 29, 32, 53 HR, 8, 56 I/O, 19, 20, 21, 22, 23, 27, 29, 31, 32, 33, 34, 35, 36, 38, 39, 40, 41, 43, 44, 45 Idle, 26 idle mode, 8 interface, 7, 8, 9, 12, 19, 20, 21, 22, 27, 41, 42, 44, 45, 46, 52 data, 7, 8, 27, 64, 65 Data Carrier Detect, 19, 27 dB, 46, 56 DCS, 7, 16, 26, 46, 48, 55 digital, 12, 34, 44, 52, 66 Digital, 34, 56 dual-band, 7 Keyboard, 21, 44 MIC1N, 20, 38 MIC1P, 20, 38 MIC2N, 20, 36 48/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra MIC2P, 20, 36 microphone, 36, 37, 38, 63 Microphone, 63 Microphone, 20, 36, 37, 38, 52 MMCX (Miniature Micro Connector), 7, 12, 46, 48 MNP2, 9 MO, 9, 56 modem, 7, 8, 10, 12, 13, 14, 15, 16, 18, 25, 28, 37, 44, 46, 48, 49 module, 7, 10, 31 Mounting, 8 MT, 9, 56 Multiparty, 9 SIMPRES, 41 SIMRST, 22, 41, 42, 43 SIMVCC, 22, 41, 42, 43 SMS, 7, 8, 9, 56 socket, 22, 41 speaker, 36, 39, 40, 52 Speaker, 19, 20, 39, 40, 63 SPI, 21, 22, 44 SPK1N, 20, 40 SPK1P, 20, 40 Storage temperature, 8 Telephony, 8 terminal, 52 Tricodec, 8 nominal value, 25 OFF, 15, 16, 20, 28, 29, 30 Ohms, 39, 40, 46 ON/~OFF, 20, 28 operating conditions, 23, 27, 29, 31, 32, 33, 34, 35, 36, 38, 39, 40, 41, 44, 45 Operating temperature range, 8 PCB, 11 PCS, 7, 46, 48 Performance Test, 16 Phone Book, 64 phonebook, 64 point to point, 9 power, 8, 13, 25, 29, 30, 32, 39, 40, 41, 46, 48, 52 power supply, 25, 41 Power supply, 8, 25 UCS2, 9 USSD, 9 V.42bis, 9 VCC, 20, 21, 22, 43 voice, 7, 63, 66 Volume, 8 WAP, 56 Weight, 8 Integra, 1, 3, 6, 7, 10, 11, 13, 16, 17, 18, 28, 29, 31, 32, 34, 46, 52 Xmodem, 9 radio, 13, 16, 48, 65 Real Time Clock, 9 RF, 7, 10, 12, 13, 14, 15, 16, 17, 19, 46, 48, 52 Ring Indicator, 19, 27 RST, 20, 32, 33, 43 serial link, 9, 27, 52 Signal, 27, 29, 31, 32, 33, 34, 35, 36, 38, 39, 40, 41, 43, 44, 45, 63 SIM, 7, 8, 9, 10, 12, 19, 22, 41, 42, 43, 46, 49, 52, 55, 56 SIM Toolkit, 9 SIMCLK, 22, 41, 42, 43 SIMDATA, 22, 41, 42, 43 49/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 50/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra Figures figure 1 : mechanical description........................................................................................................... 10 figure 2 : mechanical description II........................................................................................................ 11 figure 3 : 50-pin connector..................................................................................................................... 21 figure 4 : pin numbering/bottom view .................................................................................................... 22 figure 5* : level shifter application diagram for serial link ...................................................................... 25 figure 6 : power OFF procedure 1 ......................................................................................................... 26 figure 7 : power OFF procedure 2 ......................................................................................................... 26 figure 8 : boot procedure ....................................................................................................................... 27 figure 9 : reset procedure ...................................................................................................................... 28 figure 10 : microphone 2 input ............................................................................................................... 31 figure 11 : microphone 1 input ............................................................................................................... 32 figure 12 : speaker 2 output................................................................................................................... 33 figure 13 : speaker 1 output................................................................................................................... 34 Figure 14: SIM socket............................................................................................................................ 37 Figure 15: high and low profile CLP connectors.................................................................................... 40 Figure 16: flexible flat cable................................................................................................................... 40 Figure 17: flex cable connector ............................................................................................................. 40 Figure 18: MMCX connector example (right angle) .............................................................................. 41 Figure 19: Integra demoboard description ............................................................................................ 43 Tables Table 1 : Wavecom acceptance test ..................................................................................................... 15 Table 2 : 50-pin connector description .................................................................................................. 18 Table 3 : operating conditions ............................................................................................................... 20 Table 4 : power supply pin description .................................................................................................. 22 Table 5 : Power consumption in EGSM mode @ 25°C......................................................................... 23 Table 6 : Power consumption in GSM 1800 and1900 mode @ 25°C................................................... 23 Table 7 : Serial Link pin description ...................................................................................................... 24 Table 8 : ON / OFF pin description........................................................................................................ 26 Table 9 : BOOT pin description ............................................................................................................. 27 Table 10 : reset signal pin description................................................................................................... 28 Table 11 : reset signal electrical characteristics.................................................................................... 28 Table 12 : reset signal operating conditions.......................................................................................... 28 Table 13 : the flashing LED pin description........................................................................................... 29 Table 14 : LED and Integra status......................................................................................................... 29 Table 15 : General Purpose pin description .......................................................................................... 29 Table 16 : A/D converter pin description ............................................................................................... 30 Table 17 : A/D converter electrical characteristics ................................................................................ 30 Table 18 : microphone 2 input pin description....................................................................................... 31 Table 19 : microphone 1 input pin description....................................................................................... 32 Table 20 : speaker 2 output pin description .......................................................................................... 33 Table 21 : speaker 1 output pin description .......................................................................................... 34 Table 22 : SIM interface pin description ................................................................................................ 35 Table 23 : SIM interface electrical characteristics ................................................................................. 36 Table 24 : SIM socket pin description ................................................................................................... 36 Table 25 : SPI Bus pin description ........................................................................................................ 37 Table 26 : keypad interface pin description........................................................................................... 38 Table 27 : radio characteristics.............................................................................................................. 41 Table 28 : climatic and mechanical environment .................................................................................. 42 Table 29 : minimum signals to operate the Integra ............................................................................... 45 Table 31 : GSM ETSI recommendations for Phase I and Phase II....................................................... 46 Table 30 : AT command list................................................................................................................... 54 51/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 52/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 12 Annexes 12.1 Mechanical specifications 53/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 12.2 3V/5V SIM management 12.3 AT command list For comprehensive information about AT Commands, please read the AT Commands user’s guide Table 30 : AT command list General Commands +CGMI +CGMM +CGMR +CGSN +CSCS +CIMI +CCID +GCAP A/ +CPOF +CFUN +CPAS +CMEE +CKPD +CCLK +CALA Manufacturer Identification Request Model Identification Request Revision Identification Product Serial Number Select TE Character Set Request IMSI Card Identification Capabilities List Repeat Last Command Power Off Set Phone Functionality Phone Activity Status Report Mobile Equipment Errors Keypad Control Clock management Alarm management 54/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra Call Control Commands Dial command Hang-up Command Answer a Call +CEER Extended Error Report +VTD, +VTS DTMF Signals ATDL Redial Last Telephone Number AT%Dn Automatic Dialing (or SMS send) with DTR ATSO Automatic Answer +CICB Incoming Call Bearer +VGR, +VGT Gain Control +CMUT Microphone Mute Control +SPEAKER Speaker and Microphone Selection +ECHO Echo Cancellation +SIDET Side Tone Modification +VIP Initialize Voice Parameters +CSNS Single Numbering Scheme Network Service Commands +CSQ Signal Quality +COPS Operator Selection +CREG Network Registration +WOPN Read Operator Name +CPOL Preferred Operator List Security Commands +CPIN Enter PIN +CPIN2 Enter PIN2 +CPINC PIN Remaining Attempt Number +CLCK Facility Lock +CPWD Change Password Phone Book Commands +CPBS Select Phone Book Memory Storage +CPBR Read Phone Book Entries +CPBF Find Phone Book Entries +CPBW White Phone Book Entry +CPBP Phone Book Phone Search +CPBN Move Action in Phone Book +CNUM Subscriber Number +WAIP Avoid Phone Book Init 55/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra Short Message Commands +CSMS Select Message Service +CNMA New Message Acknowledgement +CPMS Preferred Message Storage +CMGF Preferred Message Format +CSAS Save Settings +CRES Restore Settings +CSDH Show Text Mode parameters +CNMI New Message Indication +CMGR Read Message +CMGL List Message +CMGS Send Message +CMGW Write Message to Memory +CMSS Send Message from Storage +CSMP Set Text Mode Parameters +CMGD Delete Message +CSCA Service Center Address +CSCB Select Cell Broadcast Message Types +WCBM Cell Broadcast Message Identifiers +WMSC Message Status Modification +WMGO Message Overwriting Supplementary Services Commands +CCFC Call Forwarding +CLCK Call Barring +CPWD Modify SS Password +CCWA Call Waiting +CLIR Calling Line Identification Restriction +CLIP Calling Line Identification Presentation +COLP Connected Line Identification Presentation +CAOC Advice Of Charge +CACM AccumulatedCcall Meter +CAMM Accumulated Call Meter Maximum +CPUC Price Per Unit and Currency Table +CHLD Call Related Supplementary Services +CLCC List Current Calls +CSSN Supplementary Service Notifications +CUSD Unstructured Supplementary Service Data +CCUG Closed User Group Data Commands +CBST Bearer Type Selection +FCLASS Select Mode +CR Service Reporting Control +CRC Cellular Result Codes +ILRR DTE-DCE Local Rate Reporting +CRLP Radio Link Protocol Parameters +DOPT Others Radio Link Parameters %C Select Data Compression +DS V42 bis Data Compression +DR V42 bis Data Compression Report \N Select Data Error Correcting Mode 56/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra Fax Commands +FTM Transmit Speed +FRM Receive Speed +FTH HDLC Transmit Speed +FRH HDLC Receive Speed +FTS Stop Transmission and Wait +FRS Receive Silence Fax Class 2 Commands +FDT Transmit Data +FDR Receice Data +FET Transmit Page Punctuation +FPTS Page Transfer Status Parameters +FK Terminate Session +FBOR Page Transfer Bit Order +FBUF Buffer Size Report +FCQ Copy Quality Checking +FCR Capability to Receive +FDIS Current Sessions Parameters +FDCC DCE Capabilities Parameters +FLID Local ID String +FPHCTO Page Transfer Timeout Parameter V24-V25 Commands +IPR Fixed DTE Rate +ICF DTE-DCE Character Framing +IFC DTE-DCE Local Flow Control &C Set DCD Signal &D Set DTR Signal &S Set DSR Signal Back to Online Mode Result Code Suppression DCE Response Format Default Configuration &W Save Configuration &T Auto-Tests Echo &F Restore Factory Settings &V Display Configuration Request Identification Information SIM Toolkit Commands +STSF SIM Toolkit Set Facilities +STIN SIM Toolkit Indication +STGI SIM Toolkit Get Information +STCR SIM Toolkit Control Response +STGR SIM Toolkit Give Response 57/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra Specific AT Commands +CCED Cell Environment Description +CCED Automatic RxLev Indication +WIND General Indications +ADC Analog Digital Converters Measurements +CMER Mobile Equipment Event Reporting +WLPR Read Language Preference +WLPW Write Language Preference +WIOR Read GPIO Value +WIOW Write GPIO Value +WAC Abort Command +WTONE Play Tone +WDTMF Play DTMF Tone +WDWL Wavecom Downloading +WVR Wavecom Voice Rate +WDR Data Rate +WHWV Hardware Version +WDOP Date Of Production +WSVG Wavecom Select Voice Gain +WSTR Wavecom Status Request +WSCAN Wavecom Scan +WRIM Ring Indicator Mode +W32K Power saving mode 58/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 13 RF exposure instructions Pursuant to 47 CFR § 24.52 of the FCC Rules and Regulations, personnal communications services (PCS) equipment is subject to the radiofrequency radiation exposure requirements specified in § 1.1307(b), § 2.1091 and § 2.1093 as approporiate. The Wavecom Modem is a GSM (PCS 1900) terminal which operates in the US licensed PCS frequency spectrum. The device transmits over the 1850-1910 MHz band and receives over the 1930-1990 MHz Band. Wavecom, Inc. certifies that it has determined that the Modem complies with the RF hazard requirements applicable to broadband PCS equipment operating under the authority of 47 CFR Part 24, Subpart E of the FCC Rules and Regulations. This determination is dependent upon installation, operation and use of the equipment in accordance with all instructions provided. The Modem is designed for and intended to be used in fixed and mobile applications. "Fixed" means that the device is physically secured at one location and is not able to be easily moved to another location. "Mobile" means that the device is designed to be used in other than fixed locations and generally in such a way that a separation distance of at least 20 cm is normally maintained between the transmitter's antenna and the body of the user or nearby persons. The Modem is not designed for or intended to be used in portable applications (within 20 cm of the body of the user) and such uses are strictly prohibited. To ensure that the unit complies with current FCC regulations limiting both maximum RF output power and human exposure to radiofrequency radiation, a separation distance of at least 20 cm must be maintained between the unit's antenna and the body of the user and any nearby persons at all times and in all applications and uses. Additionally, in mobile applications, maximum antenna gain must not exceed 3 dBi (to comply with Section 24.232(b) and is limited to7 dBi for fixed applications. Finally, the tune-up procedure for the O9EM2113 ensures that the maximum RF output power of the device does not exceed 30.0 dBm within the variations that can be expected due to quantity production and testing on a statistical basis. 59/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable. March 2002/ version 1.6 Integra 14 Instructions to OEM Wavecom User’s manual includes specific warnings and cautions in order to ensure that OEMs are aware of their responsibilities, with regards to RF exposure compliance, for products into which the modem is integrated. With this guidance, the OEM will be able to incorporate into their documentation the necessary operating conditions and warnings. OEMs need to provide a manual with the ‘’final’’ product that clearly states the operating requirements and conditions and that these must be observed to ensure compliance with current FCC RF exposure requirements / MPE limits (refer to chapter 13. RF exposure instructions ). This will enable the OEM to generate (and provide the end-user with) the appropriate operating instructions, warnings and cautions, and/or markings for their product. 60/60 confidential © This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. Ce document est la propriété exlcusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Modify Date : 2002:03:28 12:17:35-08:00 Create Date : 2002:03:27 18:12:59-08:00 Page Count : 60 Creation Date : 2002:03:28 02:12:59Z Mod Date : 2002:03:28 02:12:59Z Producer : Acrobat Distiller 5.0 (Windows) Author : Sté WAVECOM Metadata Date : 2002:03:28 02:12:59Z Creator : Sté WAVECOM Title : Introduction to the Integra: outstanding assets Page Mode : UseNone Tagged PDF : YesEXIF Metadata provided by EXIF.tools