Sierra Wireless MC8355 Multi-band Radio Module User Manual Q550 FM10
Sierra Wireless Inc. Multi-band Radio Module Q550 FM10
Contents
Host User Manual
User’s
Guide
Learn how to use your
Fujitsu STYLISTIC®
Q550 Tablet PC
Copyright and Trademark Information
Fujitsu America, Inc.has made every effort to ensure the accuracy and completeness of this document. Because ongoing development efforts
are made to continually improve the capabilities of our products, however, the data contained herein represents Fujitsu design objectives and
is provided for comparative purposes; actual results may vary based on a variety of factors. This product data does not constitute a warranty.
Specifications are subject to change without knowledge.
Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Limited; STYLISTIC is a registered trademark of Fujitsu America,
Incorporated.
Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
The SD Logo is is registered with the U.S. Patent and Trademark Office and with other trademark offices around the world by SD-3C, LLC.
Intel, Intel Core, and Intel Atom are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other
countries.
OmniPass is a trademark of Softex, Inc.
Broadcom is a registered trademark of Broadcom Corporation.smartcard
Norton Internet Security is a trademark of Symantec Corporation in the United States and other countries.
AirPrime is a trademark of Sierra Wireless Inc.
Gobi3000 is a trademark of Qualcomm Inc.
Nuance and XT9 are either registered trademarks or trademarks of Nuance Communications, Incorporated.
Adobe and Adobe Reader are registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Ralink is a registered trademark of Ralink Technology Corporation.
Bluetooth and the Bluetooth logo are registered trademarks of Bluetooth SIG, Inc.
Realtek is a trademark of Realtek Semiconductor Corp.
Wi-Fi is a trademark of the Wireless Ethernet Compatibility Alliance (WECA).
All other products are trademarks or registered trademarks of their respective companies. All other trademarks mentioned herein are the
property of their respective owners.
Copyright 2011 Fujitsu America, Incorporated. All rights reserved. No part of this publication may be copied, reproduced, or translated,
without the prior written consent of Fujitsu America, Incorporated. No part of this publication may be stored or transmitted in any electronic
form without the prior consent of Fujitsu America, Incorporated. B5FJ-9941-01ENZ0-00
USER GUIDE FOR WIRELESS BROADBAND CONNECTION
IF YOU HAVE THE OPTIONAL WIRELESS WAN (WWAN) DEVICE INSTALLED IN YOUR TABLET PC, THE WWAN USER’S
GUIDE IS LOCATED AT:
http://solutions.us.fujitsu.com/www/content/support/mobile/support_notices
PLEASE CLICK “3G MINI-CARD GOBI3000 REGULATORY AND SAFETY INFORMATION” TO OPEN THE FULL USER GUIDE
CONTAINING WARNINGS AND PRECAUTIONS ASSOCIATED WITH RF SAFETY WHEN USING THE WWAN DEVICE.
DECLARATION OF CONFORMITY
according to FCC Part 15
Responsible Party Name: Fujitsu America, Incorporated
Address: 1250 E. Arques Avenue,
Sunnyvale, CA 94085
Telephone: (408) 746-6000
Declares that product: Base Model Configuration: STYLISTIC Q550 Tablet PC
Complies with Part 15 of the FCC Rules.
This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions:
(1) This device may not cause harmful interference, (2) This device must accept any interference received,
including interference that may cause undesired operation.
IMPORTANT SAFETY INSTRUCTIONS
This unit requires an AC adapter to operate. Use only UL Listed I.T.E. Class II Adapters with an output rating of 19 VDC, with a current of
2.1A (40 W).
When using your tablet PC, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons,
including the following:
•Do not use this product near water for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement
or near a swimming pool.
•Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode.
Check with local codes for possible special disposal instructions.
SAVE THESE INSTRUCTIONS
For Authorized Repair Technicians Only
CAUTION: HOT SURFACE: THE BOTTOM OF THIS COMPUTER CAN BECOME HOT WHEN USED FOR
LONG PERIODS OF TIME. WHEN USING THIS DEVICE, TAKE CAUTION TO LIMIT LONG TERM OR
CONTINUOUS USE WHILE RESTING IT ON EXPOSED SKIN, SUCH AS THE LAP.
DANGER OF EXPLOSION IF LITHIUM (CLOCK) BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY
WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER. DISPOSE OF USED
BATTERIES ACCORDING TO THE MANUFACTURER’S INSTRUCTION.
FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH THE SAME TYPE AND
RATING FUSE.
+
AC adapter output polarity:
Recycling your battery
Over time, the batteries that run your mobile computer will begin to hold a charge for a shorter amount of time; this is a natural occurrence
for all batteries. When this occurs, you may want to replace the battery with a fresh one*. If you replace it, it is important that you dispose of
the old battery properly because batteries contain materials that could cause environmental damage if disposed of improperly.
Fujitsu is very concerned with environmental protection, and has enlisted the services of the Rechargeable Battery
Recycling Corporation (RBRC)**, a non-profit public service organization dedicated to protecting our environment by
recycling old batteries at no cost to you.
RBRC has drop-off points at tens of thousands of locations throughout the United States and Canada. To find the location
nearest you, go to www.RBRC.org or call 1-800-822-8837.
If there are no convenient RBRC locations near you, you can also go to the EIA Consumer Education Initiative website (http://EIAE.org/)
and search for a convenient disposal location.
Remember – protecting the environment is a cooperative effort, and you should make every effort to protect it for current and future
generations.
* To order a new battery for your Fujitsu mobile computer, go to the Fujitsu shopping site at www.shopfujitsu.com in the US or
www.fujitsu.ca/products/notebooks in Canada.
** RBRC is an independent third party to which Fujitsu provides funding for battery recycling; RBRC is in no way affiliated with
Fujitsu.
Contents
Preface
About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Conventions Used in the Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Fujitsu Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Chapter 1 Getting to Know Your Tablet PC
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Locating the Connectors and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Front Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Back Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Status Indicator Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Display Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Adjusting Display Panel Brightness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Active Digitizer/Touchscreen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Active Digitizer Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Using the Capacitive Touchscreen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Accessing the OnScreen TouchPad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Using the Nuance SoftKeyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Caring for the Pen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Tablet PC Buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
7
Chapter 2 Getting Started with Your Tablet PC
Power Sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Connecting the Power Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Starting Your STYLISTIC Tablet PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Power On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Boot Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Hard Disk Drive Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Booting the System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Starting Windows the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Registering Your STYLISTIC Tablet PC with Fujitsu . . . . . . . . . . . . . . . 42
Installing ClickMe!. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Power Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Power/Suspend/Resume Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Sleep Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Hibernation Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Windows Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Restarting the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Powering Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Chapter 3 User-Installable Features
Lithium Polymer Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Recharging the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Replacing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Secure Digital Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Installing SD Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Removing an SD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
8
Chapter 4 Troubleshooting Your Tablet PC
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Identifying the Problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Specific Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Power On Self Test Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Restoring Your Pre-installed Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Re-installing Individual Drivers and Applications. . . . . . . . . . . . . . . . . . . 65
Restoring the Operating System for Windows . . . . . . . . . . . . . . . . . . . . . . 66
Chapter 5 Care and Maintenance
Caring for your Tablet PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Cleaning your Tablet PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Storing your Tablet PC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Traveling with your Tablet PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Media Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Secure Digital Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Chapter 6 System Specifications
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Configuration Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Microprocessor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Chipset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Video. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Mass Storage Device Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Communications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Security Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Device Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
9
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Dimensions and Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Environmental Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Popular Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Included Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Learning About Your Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Appendix A: WLAN User’s Guide
Before Using the Optional Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Wireless LAN Device Covered by this Document. . . . . . . . . . . . . . . . . . . 87
Characteristics of the WLAN Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Wireless LAN Modes Using this Device . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Deactivating/Disconnecting the WLAN Device . . . . . . . . . . . . . . . . . . . . 90
Deactivation Using the Wireless On/Off Switch . . . . . . . . . . . . . . . . . . . . 91
Disconnection Using the Icon in the Taskbar. . . . . . . . . . . . . . . . . . . . . . . 91
Activating the WLAN Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Configuring the Wireless LAN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Configuring the WLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Connection to the network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Troubleshooting the WLAN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
WLAN Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Using the Bluetooth Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
What is Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Where to Find Information About Bluetooth . . . . . . . . . . . . . . . . . . . . . . . 97
10
Appendix B: Fingerprint Sensor Device
Introducing the Fingerprint Sensor Device . . . . . . . . . . . . . . . . . . . . . . . . 99
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Installing OmniPass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
User Enrollment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Using OmniPass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Configuring OmniPass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
OmniPass Control Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Appendix C: FujitsuHL User Guide
FujitsuHL Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Starting FujitsuHL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Closing FujitsuHL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
About FujitsuHL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Home Launcher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Gadget Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Launcher Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Photo Launcher. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Documents Launcher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Camera Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Photo Viewer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
11
Preface
About This Guide
The STYLISTIC Q550 Tablet PC is a high-performance pen-based computer that has been designed to
support MicrosoftWindows 7 Professional edition.
This manual explains how to operate your Tablet PC hardware and built-in system software.
The STYLISTIC Q550 Tablet PC is a completely self-contained unit with a 10.1” WXGA LED backlit
IPS display with 160 degree vertical and horizontal viewing angles. It has a powerful interface that enables
it to support a variety of optional features.
Conventions Used in the Guide
Pages with additional information about a specific topic are cross-referenced within the text.
On screen buttons or menu items appear in bold. Example: Click OK to restart your Tablet PC.
THE INFORMATION ICON HIGHLIGHTS INFORMATION THAT WILL ENHANCE YOUR UNDERSTANDING OF
THE SUBJECT MATERIAL.
THE CAUTION ICON HIGHLIGHTS INFORMATION THAT IS IMPORTANT TO THE SAFE OPERATION OF YOUR
COMPUTER, OR TO THE INTEGRITY OF YOUR FILES. PLEASE READ ALL CAUTION INFORMATION
CAREFULLY.
12
- About This Guide
Fujitsu Contact Information
Service and Support
You can contact Fujitsu Service and Support in the following ways:
•Toll free: 1-800-8Fujitsu (1-800-838-5487)
•Website: http://www.computers.us.fujitsu.com/support
Before you place the call, you should have the following information ready so that the customer support
representative can provide you with the fastest possible solution:
•Product name
•Product configuration and serial numbers
•Purchase date
•Conditions under which the problem occurred
•Any error messages that have occurred
•Type of device connected, if any
Fujitsu Shopping Online
You can go directly to the online by going to the website at: www.shopfujitsu.com.
Limited Warranty
Your STYLISTIC Q550 Tablet PC is backed by a Fujitsu International Limited Warranty. Check the
service kit that came with your tablet PC for the Limited Warranty period and terms and conditions.
THE WARNING ICON HIGHLIGHTS INFORMATION THAT CAN BE HAZARDOUS TO EITHER YOU, YOUR
TABLET PC, OR YOUR FILES. PLEASE READ ALL WARNING INFORMATION CAREFULLY.
13
Chapter 1
Getting to Know Your Tablet PC
Overview
The STYLISTIC Q550 Tablet PC
is a high-performance pen-based
computer that has been designed to
support Microsoft Windows7
Professional edition.
This chapter provides an overview
of the STYLISTIC Q550 Tablet PC
and its many features.
Figure 1. STYLISTIC Q550 Tablet PC
14
- Locating the Connectors and Controls
Locating the Connectors and Controls
Features and controls that you use to operate your Tablet PC are outlined below and illustrated in Figures
2 and 3. Details on using these features and controls are provided later in this manual.
Figure 2. STYLISTIC Q550 Tablet PC Features (Bottom, Right View)
Front Features
Front Web Camera
The front-facing VGA web camera allows you to take pictures of yourself to send over the internet. For
information on using the microphone and web cam, see the documentation associated with the FujitsuHL
application.
Front Web Camera Display
Pen Tether
Attachment
Point
Wireless
Device Switch
Application
Buttons
Status
Indicators
Power/Suspend/
Resume Switch
DC Input Connector
Speaker
Docking Cradle Connector
15
- Locating the Connectors and Controls
Display
The 10.1” Wide XGA display offers 160 degree vertical and horizontal viewing angles.
Pen Tether Attachment Point
The pen tether attachment point is used to connect your pen -- or stylus -- to the system to prevent its loss.
Wireless Device On/Off switch
The wireless device on/off switch is used to turn the optional WLAN, WWAN, and Bluetooth devices on
and off. Switching the device off when not in use will help to extend battery life.
Application Buttons
Allow you to quickly launch pre-defined applications and utilities, rotate your screen, and perform Ctl-
Alt-Del by pressing a button. See “Tablet PC Buttons” on page 33.
System Status Indicators
Indicate the operational status of the Tablet PC power and battery charge level. See “Status Indicator
Panel” on page 18.
Power/Suspend/Resume Switch
Allows you to turn on, off, sleep, resume, hibernate or wake the Tablet PC in order to optimize battery life.
See “Starting Your STYLISTIC Tablet PC” on page 37.
DC input connector:
Allows you to connect the AC adapter or auto adapter.
Speaker
The speaker allows you to hear sound from the system.
Docking Cradle Connector
Allows you to connect the optional STYLISTIC Docking Cradle.
16
- Locating the Connectors and Controls
Figure 3. STYLISTIC Q550 Tablet PC Features (Back View)
Back Features
Battery Release Latches
Used to release the removable battery.
Rear Web Camera
The 1.3 megapixel rear web camera allows you to take pictures of objects in front of you for sharing over
the internet. For information on using the camera, see the documentation associated with the FujitsuHL
application.
Battery Release Latches
Rear Web Camera
SD Card Slot
Fingerprint
Sensor
Built-in
Microphone
USB 2.0 Port
SmartCard Slot
Line Out/
Headphone Jack
HDMI Port
Built-in Microphone
Removable Battery
17
- Locating the Connectors and Controls
SD Card Slot
The Secure Digital (SD) card slot allows you to insert a flash memory card for data storage. Flash memory
cards allow you to transfer data to and from a variety of different digital devices. See “Secure Digital
Cards” on page 53.
Fingerprint Sensor
The fingerprint sensor allows you to start your system by swiping your finger over the sensor. See
“Introducing the Fingerprint Sensor Device” on page 99.
Built-in Microphones
The built-in microphones allow you to input analog audio.
USB 2.0 port
Allows you to connect Universal Serial Bus-compliant devices (compliant with USB Standard Revision
2.0) to the Tablet PC. Four additional USB ports are located on the optional STYLISTIC Docking Cradle.
Smart Card Slot
The dedicated Smart Card slot allows you to insert a Smart Card on which you can store such data as
medical information or electronic “cash”.
Line Out/Headphone Jack
Allows you to connect a set of stereo headphones.
HDMI Port
The HDMI port is used to connect compatible digital devices with your computer (such as a high-
definition television or AV receiver).
Removable Lithium Polymer Battery
Can be removed and replaced with a charged battery. See “Lithium Polymer Battery” on page 47.
18
- Status Indicator Panel
Status Indicator Panel
Icons appear under each of the system status LEDs in the status display indicating the status of system
power and battery charge status. The location of icons in the Status display is shown in Figure 4.
Table 1 explains how the LEDs associated with the individual icons are displayed, and describes what the
variations of that display indicate. (If an icon is not displayed, it indicates that the related system function
is off or inactive.
Figure 4. Status Display Icons
Power Charge/
DC in
19
- Status Indicator Panel
Table 1. Status Display Conditions
In the following table, a “blinking” LED flashes at the rate of once per second; an LED that is “blinking, slow” flashes at
the rate of one second on, five seconds off.
Icon Mode/State LED State Remarks
Power
• On State
• Idle Mode
Blue,
continuous The system is powered on and ready
for use.
• Sleep Blue, blinking The system has suspended and
saved active settings to RAM.
•Off State
• Hibernate
Off The system has suspended and
saved settings and data to the hard
disk drive.
Charge/DC In
• On State
• Idle Mode
•Sleep
• Hibernate
•Off State
Green AC adapter and battery are available
and charged battery level is 50-100%.
Orange AC adapter and battery are available
and charged battery level is less than
50%.
Green, blinking Tablet PC is in Suspend mode, AC
adapter and battery are available and
charged battery level is 50-100%.
Orange,
blinking Tablet PC is in Suspend mode, AC
adapter and battery are available and
charged battery level is less than
50%.
Off The AC Adapter is not available.
20
- Display Panel
Figure 5. Tablet PC Display Panel
Display Panel
Your STYLISTIC Q550 Tablet PC contains an LCD display panel that is backlit for easier viewing in
bright environments. The slate design of your Tablet PC allows you to easily hold the unit and rotate it
90o, 180o, or 270o in either direction. This display is used as a tablet, much as you would a pad of paper.
Adjusting Display Panel Brightness
To adjust brightness with the power management utility:
Click Start -> Control Panel. In View by:, select one of the icon views. Select Display, then click Adjust
brightness in the left pane. Under Select a power plan, select the plan settings you want to use. Drag
Screen brightness: bar (at the bottom of the window) to the left or right, depending on your preference.
21
- Display Panel
Holding the Tablet PC
The STYLISTIC Q550 can be held in any of four orientations, depending upon how you would like to use
it. There are primary and secondary landscape orientations and primary and secondary portrait
orientations. The primary orientations are the most practical (for example, when the primary portrait
orientation is used, the web camera is at the top of the display).
Primary Landscape Orientation Primary Portrait
Orientation Secondary Landscape Orientation Secondary Portrait
Orientation
21
- Active Digitizer/Touchscreen
Active Digitizer/Touchscreen
Active Digitizer Display
The integrated active digitizer allows you to use the
included stylus (also called a “pen”) as a pointing
device. (For detailed information about caring for
your stylus, go to “Caring for the Pen” on
page 27.)
You can use the stylus to click, double-click, drag
items and icons, write text, or to draw like a pen or
pencil in applications that support this behavior, such
as drawing or painting programs. See the
documentation that came with your application for
details.
Figure 6. Using the Active Digitizer Display
•DO NOT USE EXCESSIVE FORCE WHEN TAPPING OR WRITING ON THE SCREEN WITH THE STYLUS.
EXCESSIVE FORCE COULD RESULT IN DAMAGE TO THE LED AND/OR ACTIVE DIGITIZER.
•TO PURCHASE ADDITIONAL OR REPLACEMENT STYLUSES, VISIT THE FUJITSU ACCESSORIES WEBSITE
AT: WWW.SHOPFUJITSU.COM.
22
- Active Digitizer/Touchscreen
Clicking on Active Digitizer Display
To left-click, touch the object you wish to select and
then lift the stylus tip immediately.
Figure 7. Clicking on the Active Digitizer Display
Figure 8. Right-clicking Active Digitizer
Right-Clicking on Active Digitizer
Right-click can be accomplished by holding the
front of the toggle button down while tapping on
the screen. To change the settings for the right-
click feature, go to Start -> Control Panel -> Pen
and Touch. In the Pen Options tab, select “Press
and Hold” then click the [Settings] button.
23
- Active Digitizer/Touchscreen
Double-Clicking
To double-click, touch the item twice, and then
immediately remove the stylus tip.
Figure 9. Double-clicking the Display
Dragging
Dragging means moving an item with the stylus by
touching the screen, moving and then lifting the stylus.
To drag, touch the Active Digitizer Display with your
stylus on the item you wish to move. While continuing
to touch the screen with the stylus, drag the item to its
new location by moving the stylus across the screen,
and then lifting the stylus to release it.
Figure 10. Dragging on the Display
24
- Active Digitizer/Touchscreen
Calibrating the Display
In order to ensure accurate tracking between the stylus and cursor, you must run the Calibration Utility
before you use the system for the first time, or after you change the display resolution.
To run the calibration utility:
1Go to Start -> Control Panel.
2Double-click the Tablet PC Settings icon and select the Display tab
3Click the [Calibrate] button, then select whether you want to calibrate pen input or touch input.
4Adjust the display of your Tablet PC to a comfortable angle and find the (+) symbol in the upper-left corner of
the display.
5Using the stylus or your finger (depending upon which type of input you are calibrating), firmly touch the screen
directly on the (+) symbol. Lift the stylus from the screen and the target will move to a different location on the
screen.
6Repeat step 5 until you have selected all of the (+) symbols.
7Once you have selected all the symbols, press the [OK] button.
8Touch the stylus to various points on the screen to verify that the screen is correctly calibrated. If you are not
satisfied with the screen’s calibration, press the [Calibrate]) button to begin again.
DO NOT USE EXCESSIVE FORCE WHEN TAPPING ON THE SCREEN DURING CALIBRATION. USE OF
EXCESSIVE FORCE COULD RESULT IN DAMAGE TO THE LED AND/OR TOUCH PANEL.
25
- Active Digitizer/Touchscreen
Using the Capacitive Touchscreen
Certain configurations of this Tablet PC have an optional dual digitizer that allows you to use either the
stylus or your finger(s) as a pointing device. This type of display also allows you to use “gestures” to
perform such actions as scroll, zoom, and rotate.
Right-clicking the touchscreen
To perform a right-click action using two fingers, press the first finger at the location you want to perform
a right-click, then quickly tap and release the second finger on the screen.
Gesture Mode
To initiate gesture mode, two fingers must touch the screen within 200 ms of each other. If the second
finger touches the screen after 200 ms has elapsed, the second finger is ignored. If more than two fingers
touch the screen in that time, Advanced Gesture Mode is activated instead. When Gesture Mode is
activated, no cursor movement is sent to the system.
When both fingers are removed, Gesture mode ends. When a third finger is added, gesture mode ends and
Advanced gesture mode is activated. Note that if a gesture can’t be recognized, no action is taken. In that
case, remove both fingers from the screen and try again.
Scrolling Gesture
To scroll through long documents or on a web page, place both fingers on the screen (one finger quickly
followed by the second). If at least one finger has moved at least 3 mm, a scroll is considered. If both
fingers are moving in the same direction and parallel (given a tolerance of 5 mm), Scroll Mode is
activated. If one finger is stationary, it is not considered a scroll. If either finger is lifted, Scroll Mode is
canceled.
Zoom Gesture
The zoom gesture is especially helpful when viewing pictures. To zoom in, place two fingers on the item
you want to enlarge (one finger quickly followed by the second), then spread them away from each other.
•GESTURE SUPPORT IS DETERMINED BY THE APPLICATION IN USE.
•THE STYLUS TAKES PRECEDENCE OVER FINGER TOUCH. IF THE STYLUS IS WITHIN ACTIVE RANGE OF
THE SCREEN, FINGER TOUCH WILL BE DISABLED.
•WHEN ONE FINGER IS USED ON THE TOUCHSCREEN, IT BEHAVES IN THE SAME MANNER AS A STYLUS.
26
- Active Digitizer/Touchscreen
If at least one finger has moved at least 10 mm, a zoom event is considered. If the distance between the
fingers has changed by at least 10 mm, and both fingers have stayed on approximately the same line, Zoom
Mode is entered. If either finger strays more than 10 mm from the "zoom line" created when the fingers
first made contact, the zoom is canceled.
To zoom out, place two fingers on the item you want to reduce (one finger quickly followed by the
second), then move them towards each other.
Rotate Gesture
To change the orientation of an object on the screen, place two fingers on the image you want to rotate
(one finger quickly followed by the second), then move them in opposite directions (as if you were turning
a knob). The direction the item turns is dependant upon the direction you move your fingers.
If at least one finger moves at least 12 mm, a rotate is considered. If one finger is stationary (moving less
than 5 mm in any direction), and the other is moving, a rotate is considered. If the fingers begin moving
in the same direction, the rotation is canceled. If the distance between the fingers changes by more than
10 mm, the rotation is canceled.
Accessing the OnScreen TouchPad
Your tablet has a handy on-screen touchpad that offers a variety of helpful functions. Features of the
OnScreen TouchPad include:
•Virtual Mouse Emulator: The Virtual Mouse Emulator works in much the same manner as a
hardware mouse. With the virtual mouse, you can scroll, drag, and click, as well as perform
[Ctl]+[Click] and [Shift]+[Click] actions.
•Application Launch/Key Macro: This window provides access to five pages, each of which can
contain up to twenty buttons. Each button can be programmed to open an application, a folder,
document, or key (such as [Esc], [ Alt+X] and [Page Up]).
•Digital Keyboard: This window provides a soft keyboard for use in mathematical procedures. It
works in much the same way as the Windows standard calculator.
To access the OnScreen TouchPad, go to the Start Menu > All Programs > Fujitsu OnScreen TouchPad.
To learn more about the utility, click on Usage and Help.
27
- Active Digitizer/Touchscreen
Using the Nuance SoftKeyboard
For general information about using the Nuance SoftKeyboard, please refer to your Getting Started Guide
that came with the system. If you have questions about the Nuance SoftKeyboard, or you would like to
learn more, click the Help icon (it looks like a question mark) in the Nuance taskbar.
Caring for the Pen
Changing the Pen Settings
There are a few changes you can make to your pen settings in order to make it more suitable to your needs
(such as changing the pressure sensitivity). To do so, go to Start > Control Panel and select one of the icon
views from the “View by:” dropdown. Click on the Pen and Touch icon to open the window from which
you can change a variety of pen settings.
•ONLY USE THE PEN PROVIDED WITH YOUR TABLET PC. DO NOT USE SUBSTITUTE PEN TIPS THAT WERE NOT
SPECIALLY DESIGNED FOR YOUR TABLET PC. REPLACE THE STYLUS TIP IF IT IS WORN. THE WARRANTY DOES NOT
COVER A SCRATCHED SCREEN.
•WHILE WRITING, DO NOT TO SCRATCH THE SURFACE OF THE DISPLAY (E.G., WITH A WRISTWATCH OR BRACELET).
THE PEN OF YOUR TABLET PC IS AN ELECTRONIC INSTRUMENT WHICH CAN BE DAMAGED IF USED INCORRECTLY.
HANDLE THE PEN WITH CARE. THE FOLLOWING LIST CONTAINS GUIDELINES FOR PROPER PEN HANDLING:
•DO NOT GESTURE WITH THE PEN OR USE IT AS A POINTER.
•NEVER USE THE PEN ON ANY OTHER SURFACE THAN THE SCREEN OF YOUR TABLET PC.
•DO NOT TRY TO TURN THE THUMB GRIP ON THE PEN.
•NEVER STORE THE PEN WITH THE TIP BEARING THE WEIGHT OF THE PEN. IF THE PEN IS STORED WITH THE TIP
POINTING DOWN, THIS MAY HAVE AN ADVERSE EFFECT ON THE PEN MECHANISM (PARTICULARLY UNDER HIGH
TEMPERATURES). IN THIS CASE THE PEN TIP MAY REACT AS THOUGH IT IS CONSTANTLY BEING PRESSED DOWN.
•THE PEN CAN BE INFLUENCED BY ELECTROMAGNETIC FIELDS (CURSOR QUIVERS OR JUMPS). THERE MAY BE A FEW
AREAS ON THE SCREEN WHERE THE CURSOR QUIVERS SLIGHTLY IN SPITE OF PRESSING THE PEN DOWN FIRMLY.
28
- Active Digitizer/Touchscreen
Changing the Pen Battery
Figure 11. Replacing the Battery
•DO NOT REMOVE THE TIP OF THE PEN TO REPLACE THE
BATTERY; REMOVE ONLY THE CAP ON THE TOP OF THE PEN.
•THERE IS A RISK OF EXPLOSION IF THE BATTERY IS
REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES IN ACCORDANCE WITH LOCAL INSTRUCTIONS.
The pen contains a AAAA-battery. Before proceeding, be sure
to have a new battery available.
1Remove the rear Pen Cap (Figure 11).
2Remove the battery from the pen barrel.
3Insert the new battery into the pen barrel in the same orientation
as the one that was removed.
4Close the rear Pen Cap.
Replacing the Pen Tip
With use, the pen tip may become worn or may pick up
foreign particles that can scratch the screen. A damaged or
worn tip may not move freely, causing unpredictable results
when using the pen. If a problem like this should occur, you
should replace the pen tip.
1Pull the tip from the barrel.
2Using one of the new tips that were supplied with your pen,
insert the pointed end of the tip into the barrel and push it in
firmly until it is in place Figure 12. Replacing the Pen Tip
Pen Cap
AAAA-battery
Pen Barrel
Pen Tip
29
- Active Digitizer/Touchscreen
Installing a Pen Tether
To prevent dropping or losing your pen, you should
attach it to your system using the pen tether that is
included with the system.
To attach the pen tether to your Tablet PC, perform
the following steps:
1Attach the end of the pen tether with the smaller loop
to your pen. To do so, push the end of the tether under
the slot on the top of the pen, then thread the opposite
end of the tether through the loop.
2Attach the end of the pen tether with the larger loop to
the attachment point on the right side of your tablet.
To do so, insert the end of the pen tether through the
attachment point, then feed the pen through the large
loop in the tether. Figure 13. Installing a Pen Tether
33
- Tablet PC Buttons
Tablet PC Buttons
The three Tablet PC buttons
are located on the right-hand
side of a horizontally-
oriented system. Two of the
buttons have secondary
functions. The secondary
functions are activated by
pressing and holding the
button.
Figure 14. Application buttons
CTL-ALT-DEL IS THE ONLY APPLICATION BUTTON THAT CAN BE USED WHILE THE SYSTEM IS LOGGING
ON OR WHEN THE SYSTEM IS LOCKED (I.E., WHEN YOU HAVE THE LOGON OR COMPUTER LOCKED
WINDOW SHOWING ON YOUR DESKTOP).
Keyboard Button
Rotation Button
Ctl-Alt-Del
34
- Tablet PC Buttons
* “Press at Splash Screen”refers to the action that occurs when you press the button when the Fujitsu logo
appears when you first start up the system.
Button Icon
and Name
Primary
Function
(Press)
Secondary
Function
(Press and
Hold)
Press at
Splash Screen* In BIOS Setup
Utility Description
Keyboard
Button
Launch TabTip Launch
FujitsuHL Boot Menu Enter
Pressing the Keyboard button invokes the TabTip
utility. Pressing and holding the button launches
the FujitsuHL utility that provides shortcuts to a
variety of commonly accessed tools and tasks,
including the web camera application. If you press
the Keyboard button while the Fujitsu logo
appears during system boot, the Boot Menu will
open. While you are in the BIOS Setup utility, this
button can be used as an [Enter] key.
Rotation
Button
Screen Rotate Enable/
Disable Auto
Rotate
BIOS Setup
Utility Down
When you press the Rotate button, the system
screen orientation changes from portrait (vertical)
to landscape (horizontal) or from landscape to
portrait. When you would like to use the Tablet PC
as an eBook, for example, you would use the
portrait orientation, when accessing spreadsheets,
you would more typically use a landscape
orientation. Pressing and holding the button
enables and disables the Auto Rotate function. If
you press the Rotation button while the Fujitsu
logo appears during system boot, the BIOS Setup
Utility will open. While you are in the BIOS Setup
utility, this button can be used as a Down key
Ctl-Alt-Del
Button
Ctrl + Alt + Del None Application
Menu Up
Pressing the Ctl-Alt-Del button for approximately
one second causes it to act as if Ctl-Alt-Del had
actually been entered from a keyboard. If you
press the Ctrl+Alt+Del button while the Fujitsu logo
appears during system boot, the Application Menu
will appear. While you are in the BIOS Setup utility,
this button can be used as an Up key.
35
Chapter 2
Getting Started with Your Tablet PC
Power Sources
Your Fujitsu STYLISTIC Tablet PC has three possible power sources: a primary Lithium Polymer battery,
an AC adapter or an optional Auto/Airline adapter.
Connecting the Power Adapters
The AC adapter or optional Auto/Airline adapter provides power for operating your Tablet PC and
charging the batteries.
Connecting the AC Adapter
1Plug the DC output cable into the DC power jack of your STYLISTIC Tablet PC.
2Plug the AC adapter into an AC electrical outlet.
Connecting the Optional Auto/Airline Adapter
1Plug the DC output cable into the DC power jack on your Tablet PC.
2Plug the Auto/Airline adapter into the cigarette lighter of an automobile, or,
3Plug the Auto/Airline adapter into the DC power jack on an airplane seat.
36
- Power Sources
Figure 15. Connecting the AC Adapter
Switching from AC Adapter Power or the Auto/Airline Adapter to Battery Power
1Be sure that you have at least one charged battery installed.
2Remove the AC adapter or the Auto/Airline adapter.
DC Power Jack
AC Adapter
THE LITHIUM POLYMER BATTERY IS NOT CHARGED UPON PURCHASE. INITIALLY, YOU WILL NEED TO
CONNECT EITHER THE AC ADAPTER OR THE AUTO/AIRLINE ADAPTER TO USE YOUR TABLET PC.
37
- Starting Your STYLISTIC Tablet PC
Starting Your STYLISTIC Tablet PC
Power On
Power/Suspend/Resume Switch
The Power/Suspend/Resume switch is used to turn on your STYLISTIC Tablet PC from its off state. Once
you have connected your AC adapter or charged the internal Lithium Polymer battery, you can power on
your Tablet PC.
To turn on your STYLISTIC Tablet PC from its off state, slide the Power/Suspend/Resume switch, located
on the bottom edge of the right side (when the system is held horizontally). When you are done working
you can either leave your Tablet PC in Suspend mode or you can turn it off. See “Sleep Mode” on page 43
and “Powering Off” on page 46.
Figure 16. Power/Suspend/Resume Switch
WHEN YOU TURN ON YOUR STYLISTIC TABLET PC BE SURE YOU HAVE A POWER SOURCE. THIS
MEANS THAT AT LEAST ONE BATTERY IS INSTALLED AND CHARGED, OR THAT THE AC OR AUTO/AIRLINE
ADAPTER IS CONNECTED AND HAS POWER.
38
- Starting Your STYLISTIC Tablet PC
When you power on your STYLISTIC, it will perform a Power On Self Test (POST) to check the internal
parts and configuration for correct functionality. If a fault is found, your STYLISTIC Tablet PC will emit
an audio warning and/or an error message will be displayed. See “Power On Self Test Messages” on
page 64. Depending on the nature of the problem, you may be able to continue by starting the operating
system or by entering the BIOS setup utility and revising the settings.
After satisfactory completion of the POST, your Tablet PC will load your operating system.
Boot Sequence
The procedure for starting-up your Tablet PC is termed the Bootup sequence and involves your Tablet
PC’s BIOS. When your STYLISTIC Tablet PC is first turned on, the main system memory is empty, and
it needs to find instructions to start up your Tablet PC. This information is in the BIOS program. Each time
you power up or restart your Tablet PC, it goes through a boot sequence which displays a Fujitsu logo until
your operating system is loaded. During booting, your Tablet PC is performing a standard boot sequence
including a Power On Self Test (POST). When the boot sequence is completed without a failure and
without a request for the BIOS Setup Utility, the system displays the operating system’s opening screen.
The boot sequence is executed when:
•You turn on the power to your STYLISTIC Tablet PC.
•You restart your Tablet PC from the Windows Shut Down dialog box.
•The software initiates a system restart. Example: When you install a new application.
NEVER TURN OFF YOUR STYLISTIC TABLET PC DURING THE POWER ON SELF TEST (POST) OR IT
WILL CAUSE AN ERROR MESSAGE TO BE DISPLAYED WHEN YOU TURN YOUR STYLISTIC TABLET PC ON
THE NEXT TIME. See “Power On Self Test Messages” on page 64.
39
- Starting Your STYLISTIC Tablet PC
Hard Disk Drive Passwords
To provide additional security for your data, you can assign passwords to your hard disk drive(s). This
feature is managed in the system BIOS Setup Utility. See BIOS Setup Utility below for information about
accessing the utility.
BIOS Setup Utility
The BIOS Setup Utility is a program that sets up the operating environment for your STYLISTIC Tablet
PC. Your BIOS is set at the factory for normal operating conditions, therefore there is no need to set or
change the BIOS’ environment to operate your Tablet PC.
The BIOS Setup Utility configures:
•Device control feature parameters, such as changing I/O addresses and boot devices.
•System Data Security feature parameters, such as passwords.
Entering the BIOS Setup Utility
To enter the setup utility, do the following:
1Turn on or restart your STYLISTIC Tablet PC.
2To enter the BIOS Setup Utility, either press the Rotation button (or press the [F2] key if you have an external
keyboard) when the Fujitsu logo appears on the screen. This will open the main menu of the BIOS Setup Utility
with the current settings displayed.
REMEMBER YOUR PASSWORDS. IF YOU SET AND FORGET YOUR USER AND MASTER HARD DISK
PASSWORDS, FUJITSU WILL NOT BE ABLE TO RESET IT. YOU MAY LOSE DATA AND HAVE TO REPLACE
YOUR SYSTEM BOARD OR HARD DISK DRIVE.
IN ORDER TO NAVIGATE THROUGH THE BIOS SETUP UTILITY, YOU MUST HAVE AN EXTERNAL
KEYBOARD ATTACHED TO YOUR TABLET.
40
- Starting Your STYLISTIC Tablet PC
3Press the [RIGHT ARROW] or [LEFT ARROW] key to scroll through the other setup menus to review or alter
the current settings.
BIOS Guide
A guide to your Tablet PC’s BIOS is available online. Please visit our service and support website at
http://www.computers.us.fujitsu.com/support, then select User’s Guides under Online Support. Select
your Product, Series, and Model, then click [Go]. Under the Manuals tab, select the BIOS Guide.
Booting the System
We strongly recommend that you not attach any external devices until you have gone through the initial
power on sequence.
When you turn on your Tablet PC for the first time, it will display a Fujitsu logo on the screen. If you do
nothing the system will load the operating system, and then the Windows Welcome will begin.
Starting Windows the first time
In order to ensure that you receive the most benefits from the Windows operating system, it should be
registered the first time you use it.
IMPORTANT: DURING THE SETUP PROCEDURE, DO NOT DISCONNECT THE POWER SUPPLY, PRESS ANY
BUTTONS, OR USE ANY PERIPHERAL DEVICES SUCH AS A MOUSE OR KEYBOARD.
41
- Starting Your STYLISTIC Tablet PC
1First of all, you will need to read and accept the End User License Agreements (EULAs).
2You will be prompted to enter your User Name and Password and you will be given a chance to select an icon
for your account.
3The next screen asks for a Computer Name.
4You will next see a "Help protect Windows automatically” screen in which the default choice is "Use
recommended settings”. The other two choices are "Install important updates only" and "Ask me later". Select
from the three choices.
5On the next screen set your time and date settings.
6You will next see the "Select your computer's current location" screen. Make your selection from Home, Work
(Default), and Public location.
7The "Thank you" screen follows and an offer for free TBD Norton Internet Security is extended. Following are
several screens while Windows checks the system performance.
8Windows will then boot up for the first time. As noted above, the first time you initialize your system, the screen
will be blank for approximately two minutes. This is normal. During this period, do not disconnect the power
supply, press any buttons, or use any peripheral devices such as mouse or keyboard.
Registering Windows with Microsoft
To register your copy of Windows, be sure to go to the Microsoft's website at:
http://windows.microsoft.com/en-US/windows7/help/register.
•IF YOU REJECT THE TERMS OF THE LICENSE AGREEMENTS YOU WILL BE ASKED TO REVIEW THE
LICENSE AGREEMENTS FOR INFORMATION ON RETURNING WINDOWS OR TO SHUT DOWN YOUR
STYLISTIC TABLET PC.
•YOU CANNOT USE YOUR TABLET PC UNTIL YOU HAVE ACCEPTED THE LICENSE AGREEMENTS. IF YOU
STOP THE PROCESS YOUR TABLET PC WILL RETURN TO THE BEGINNING OF THE WINDOWS WELCOME
PROCESS, EVEN IF YOU SHUT YOUR TABLET PC DOWN AND START IT UP AGAIN.
42
- Starting Your STYLISTIC Tablet PC
Registering Your STYLISTIC Tablet PC with Fujitsu
You can register your STYLISTIC by going to our website at: http://solutions.us.fujitsu.com/. You will
need to be set up with an Internet Service Provider (ISP) to register online.
Installing ClickMe!
The first time you boot up your system, you will see a “Primary Settings for the PC” window. This window
explains the installations which will be performed by the Click Me! utility. If you click [Execute],
ClickMe! will begin installing. If after clicking the button you receive a “User Account Control” window,
you will be asked for your permission to continue. Click [Continue] to continue. If you cancel the
operation, the ClickMe! icon will appear on your desktop for later installation.
BEFORE INSTALLING THE CLICKME! UTILITY, BE SURE THE WIRELESS LAN SWITCH IS TURNED ON.
THERE MAY BE SOME THIRD-PARTY APPLICATIONS THAT DO NOT GET INSTALLED USING THE CLICKME!
UTILITY. FOR MORE INFORMATION, REFER TO YOUR GETTING STARTED GUIDE.
ClickMe!
43
- Power Management
Power Management
Your Fujitsu STYLISTIC Tablet PC has many options and features for conserving battery power. Some
of these features are automatic and need no user intervention. However, others depend on the parameters
you set to best suit your operating conditions, such as those for the display brightness. Internal power
management for your Tablet PC may be controlled from settings made in your operating system, pre-
bundled power management application, or from settings made in BIOS setup utility.
Besides the options available for conserving battery power, there are also some things that you can do to
prevent your battery from running down as quickly. For example, you can create an appropriate power
saving profile, put your Tablet PC into Sleep mode when it is not performing an operation, and you can
limit the use of high power devices. As with all mobile, battery powered computers, there is a trade-off
between performance and power savings.
Power/Suspend/Resume Switch
When your Tablet PC is active, the Power/Suspend/Resume switch can be used to manually put the Tablet
PC into Sleep mode. Push the Power/Suspend/Resume switch when the Tablet PC is active, but not
actively accessing anything, and immediately release the button.
If your Tablet PC is suspended, pushing the Power/Suspend/Resume switch returns it to active operation.
You can tell whether the system is Suspended by looking at the Power indicator. If the indicator is visible
and not flashing, your Tablet PC is fully operational. If the indicator is visible and flashing, the Tablet PC
is in Sleep mode. If the indicator is not visible, the power is off or your Tablet PC is in Hibernation mode.
Sleep Mode
Sleep mode in Windows saves the contents of your system memory during periods of inactivity by
maintaining power to critical parts. This mode turns off the CPU, display, hard drive, and all other internal
components except those necessary to maintain system memory and for restarting.
Your Tablet PC can be put in sleep mode by:
•Pressing the Power/Suspend/Resume switch when your system is turned on.
44
- Power Management
•Selecting “Sleep” after clicking [Start] then clicking the small arrow at the bottom right of the
window.
•Timing out from lack of activity.
•Allowing the battery to reach the Dead Battery Warning condition.
Your Tablet PC’s system memory typically stores the file on which you are working, open application
information, and any other data required to support operations in progress. When you resume operation
from Sleep mode, your Tablet PC will return to the point where it left off. You must use the
Power/Suspend/Resume switch to resume operation, and there must be an adequate power source
available, or your Tablet PC will not resume.
•IF RUNNING YOUR TABLET PC ON BATTERY POWER, BE AWARE THAT THE BATTERY CONTINUES TO
DISCHARGE WHILE YOUR TABLET PC IS IN SLEEP MODE, THOUGH NOT AS QUICKLY AS WHEN FULLY
OPERATIONAL.
•DISABLING THE POWER/SUSPEND/RESUME SWITCH PREVENTS IT FROM BEING USED TO PUT THE
TABLET PC INTO SLEEP OR HIBERNATION MODE. THE BUTTON RESUME FUNCTION CANNOT BE
DISABLED.
•IF YOUR TABLET PC IS ACTIVELY ACCESSING INFORMATION WHEN YOU ENTER THE SLEEP OR
HIBERNATION MODE, CHANGES TO OPEN FILES ARE NOT LOST. THE FILES ARE LEFT OPEN AND
MEMORY IS KEPT ACTIVE DURING SLEEP MODE OR THE MEMORY IS TRANSFERRED TO THE INTERNAL
HARD DRIVE DURING HIBERNATION MODE.
•THE MAIN ADVANTAGE OF USING HIBERNATION IS THAT POWER IS NOT REQUIRED TO MAINTAIN YOUR
DATA. THIS IS PARTICULARLY IMPORTANT IF YOU WILL BE LEAVING YOUR TABLET PC IN A SUSPENDED
STATE FOR A PROLONGED PERIOD OF TIME. THE DRAWBACK OF USING HIBERNATION MODE IS THAT IT
LENGTHENS THE POWER DOWN AND POWER UP SEQUENCES AND RESETS PERIPHERAL DEVICES.
45
- Power Management
Hibernation Feature
The Hibernation feature saves the contents of your Tablet PC’s system memory to the hard drive as a part
of the Suspend/Resume mode. Hibernation is enabled by default.
Defining Power Button Action
To determine what occurs when the power button is pressed, follow these steps:
1From the Start menu, select Control Panel, then select the Power Options icon.
2Select “Choose what the power button does” or “Choose what closing the lid does”, then make your selections
(Do Nothing, Sleep, Hibernate, or Shut Down).
Windows Power Management
The Power Options icon located in the Windows Control Panel allows you to configure some of the power
management settings. For example, you can use the Power Options to set the timeout values for turning
off the display and hard disks whether you are running the Tablet PC on battery power or one of the
adapters.
Restarting the System
If your system is on and you need to restart it, be sure that you use the following procedure.
1Click the [Start] button, and then move the mouse over the small arrow at the bottom right of the right-hand
pane.
2Select Restart from the list.
TURNING OFF YOUR STYLISTIC TABLET PC WITHOUT EXITING WINDOWS OR TURNING ON YOUR
TABLET PC WITHIN 10 SECONDS OF THE SYSTEM BEING SHUT OFF MAY CAUSE AN ERROR WHEN YOU
START THE NEXT TIME.
46
- Power Management
Powering Off
If you turn off the power while accessing a disk there is a risk of data loss. To ensure that your Tablet PC
shuts down without error, use the Windows shut down procedure.
Using the correct procedure to shut down from Windows allows your Tablet PC to complete its operations
and turn off power in the proper sequence to avoid errors. The proper sequence is:
1Click the [Start] button, and then move the mouse over the small arrow at the bottom right of the right-hand
pane.
2Select Shut Down from the list.
If you are going to store your Tablet PC for a month or more, see Care and Maintenance Section.
BE SURE TO CLOSE ALL FILES, EXIT ALL APPLICATIONS, AND SHUT DOWN YOUR OPERATING SYSTEM
PRIOR TO TURNING OFF THE POWER. IF FILES ARE OPEN WHEN YOU TURN THE POWER OFF, YOU WILL
LOSE ANY CHANGES THAT HAVE NOT BEEN SAVED, AND MAY CAUSE DISK ERRORS.
47
Chapter 3
User-Installable Features
Lithium Polymer Battery
Your STYLISTIC Tablet PC has a Lithium Polymer battery that provides power for operating your Tablet
PC when no external power source is available. The battery is durable and long lasting, but should not be
exposed to extreme temperatures, high voltages, chemicals or other hazards.
The Lithium Polymer battery operating time may become shorter if it is used under the following
conditions:
•When used at temperatures that exceed a low of 5°C or a high of 35°C (41° to 95° F). Extreme
temperatures not only reduce charging efficiency, but can also cause battery deterioration. The
Charging icon on the Status Indicator panel will flash when you try to charge a battery that is outside
its operating temperature range.
•When using a high current device such as an external optical drive or the hard drive, using the AC
adapter will conserve your battery life.
DO NOT LEAVE A FAULTY BATTERY IN YOUR TABLET PC. IT MAY DAMAGE YOUR AC ADAPTER, OPTIONAL
AUTO/AIRLINE ADAPTER, OR YOUR TABLET PC ITSELF. IT MAY ALSO PREVENT OPERATION OF YOUR
TABLET PC BY DRAINING ALL AVAILABLE CURRENT INTO THE BAD BATTERY.
48
- Lithium Polymer Battery
Recharging the Batteries
If you want to know the condition of the primary Lithium Polymer battery, check the Battery Level
indicator located on the Status Indicator panel. The indicator changes as the battery level changes.
The Lithium Polymer battery is recharged internally using the AC adapter or Auto/Airline adapter. To
recharge the battery make sure the battery that needs to be charged is installed in your STYLISTIC Tablet
PC and connect the AC or Auto/Airline adapter.
There is no memory effect on the Lithium Polymer battery therefore you do not need to discharge the
battery completely before recharging. The charge times will be significantly longer if your Tablet PC is in
use while the battery is charging. If you want to charge the battery more quickly, put your Tablet PC into
Sleep mode, or turn it off while the adapter is charging the battery. (See Power Management on page 43
for more information on Sleep mode and shutdown procedure)
•ACTUAL BATTERY LIFE WILL VARY BASED ON SCREEN BRIGHTNESS, APPLICATIONS, FEATURES, POWER
MANAGEMENT SETTINGS, BATTERY CONDITION AND OTHER CUSTOMER PREFERENCES. HARD DRIVE
USAGE MAY ALSO HAVE A SIGNIFICANT IMPACT ON BATTERY LIFE. THE BATTERY CHARGING CAPACITY IS
REDUCED AS THE BATTERY AGES. IF YOUR BATTERY IS RUNNING LOW QUICKLY, YOU SHOULD REPLACE
IT WITH A NEW ONE.
•UNDER FEDERAL, STATE, OR LOCAL LAW IT MAY BE ILLEGAL TO DISPOSE OF BATTERIES BY PUTTING
THEM IN THE TRASH. PLEASE TAKE CARE OF OUR ENVIRONMENT AND DISPOSE OF BATTERIES
PROPERLY. CHECK WITH YOUR LOCAL GOVERNMENT AUTHORITY FOR DETAILS REGARDING RECYCLING
OR DISPOSING OF OLD BATTERIES. IF YOU CANNOT FIND THIS INFORMATION ELSEWHERE, CONTACT
YOUR SUPPORT REPRESENTATIVE AT 1-800-8FUJITSU (1-800-838-5487)
MAKE SURE THAT THE PERCENTAGE CHARGE IS INDICATED BY THE BATTERY CHARGING INDICATOR ON
THE STATUS INDICATOR PANEL.
49
- Lithium Polymer Battery
Low Battery State
When the battery is running low, a low battery notification message will appear. If you do not respond to
the low battery message, the batteries will continue to discharge until they are too low to operate. When
this happens, your Tablet PC will go into Sleep mode. There is no guarantee that your data will be saved
once the Tablet PC reaches this point.
Dead Battery Suspend mode shows on the Status indicator just like the normal Sleep mode. Once your
Tablet PC goes into Dead Battery Suspend mode you will be unable to resume operation until you provide
a source of power either from an adapter, or a charged battery. Once you have provided power, you will
need to press the Power/Suspend/Resume switch to resume operation.
In the Dead Battery Suspend mode, your data can be maintained for some time, but if a power source is
not provided promptly, the Power indicator will stop flashing and go out, meaning that you have lost the
data that was not stored. Once you provide power, you can continue to use your Tablet PC while an adapter
is charging the battery.
Shorted Batteries
The Status Indicator panel indicator associated with the Battery Level indicator displays the operating
level available in that battery. If this display shows a flashing red LED, it means the battery is damaged
and must be replaced so it does not damage other parts of your STYLISTIC Tablet PC.
USING HEAVY CURRENT DEVICES OR FREQUENT EXTERNAL OPTICAL DRIVE ACCESSES MAY PREVENT
CHARGING COMPLETELY.
•ONCE THE LOW BATTERY NOTIFICATION MESSAGE APPEARS, YOU NEED TO SAVE ALL YOUR ACTIVE DATA AND
PUT YOUR TABLET PC INTO SLEEP MODE UNTIL YOU CAN PROVIDE A NEW POWER SOURCE. YOU SHOULD
PROVIDE A CHARGED BATTERY, AN AC POWER ADAPTER, OR AUTO/AIRLINE ADAPTER AS SOON AS POSSIBLE.
• WHEN YOU ARE IN SLEEP MODE THERE MUST ALWAYS BE AT LEAST ONE POWER SOURCE ACTIVE. IF YOU
REMOVE ALL POWER SOURCES WHILE YOUR STYLISTIC TABLET PC IS IN SLEEP MODE, ANY DATA THAT HAS
NOT BEEN SAVED TO THE HARD DRIVE WILL BE LOST.
50
- Lithium Polymer Battery
Replacing the Battery
With the purchase of an additional battery, you can have a fully charged spare to swap with one that is not
charged. There are two ways to swap batteries, cold-swapping and hot-swapping:
Cold-swapping Batteries
To cold-swap batteries in your battery bay, follow these easy steps:
1Have a charged battery ready to install.
2Perform one of the following two steps:
•Click the Fujitsu Battery Swap Utility icon on the desktop. Follow the instructions that appear to
put the system into Hibernate mode. Using this procedure saves your data and the system powers
down. It is then safe to swap the batteries.
•Save your data, then power down the system. It is then safe to swap the batteries.
3Note that the battery latch on the left is spring loaded, while the latch on the right is not. Unlock the battery by
first pushing the right latch backwards, then pushing and holding the left latch (Figure 17). While holding the left
latch, lift the battery out at the lift point (Figure 18).
4To install a battery, first verify that the right latch is pushed back. While pushing the left latch back and holding
it, insert a new battery into the bay (Figures 19 and 20). Lock the battery in place by sliding the right latch
forward.
51
- Lithium Polymer Battery
5Plug in the AC adapter and turn the power on.
Hot-swapping Batteries
Figure 17. Unlocking the Battery Figure 18. Removing the Battery
Figure 19. Replacing the Battery Figure 20. Locking the Battery
Lift Point
52
- Lithium Polymer Battery
To hot-swap batteries in your battery bay follow these easy steps:
1Plug an AC Adapter into the system and connect it to a power outlet.
2Follow steps 3 through 5 in “Cold Swapping Batteries”.
BE SURE TO PLUG IN AN AC ADAPTER PRIOR TO REMOVING THE BATTERY. THERE IS NO BRIDGE
BATTERY PRESENT TO SUPPORT THE SYSTEM WHILE THE BATTERY IS BEING REPLACED. IF YOU DO NOT
USE AN AC ADAPTER YOU WILL LOSE ANY UNSAVED FILES.
IF THE LITHIUM POLYMER BATTERY CONNECTOR IS NOT FULLY SEATED, YOU MAY NOT BE ABLE TO USE
YOUR TABLET PC OR CHARGE YOUR BATTERY.
53
- Secure Digital Cards
Secure Digital Cards
Your STYLISTIC Tablet PC supports Secure Digital (SD) cards, on which you can store and transfer data
to and from a variety of digital devices. These cards use flash memory architecture, which means they
don’t need a power source to retain data. Note that SD and SDHC Cards are supported, but SDXC Cards
are not.
SD Cards allow portable storage among a variety of devices, such as cell phones, GPS systems, digital
cameras, and PDAs. SD Cards transfer data quickly, with low battery consumption.
Installing SD Cards
When holding the Tablet PC in horizontal position with the front facing you and the web camera on the
left, the SD Card slot is located at the top left edge of the system, in the rear (Figures 21 and 22). To install
an SD Card, follow these steps:
Figure 21. SD Card Slot - Front Access Figure 22. SD Card Slot - Rear Access
SD Card
SD Card Slot
(relative location on rear)
SD Card
SD Card Slot
54
- Secure Digital Cards
1See your specific card manual for instructions on the installation of your card. Some cards may require that your
Tablet PC is off while installing them.
2Make sure there is no card currently in the slot. If there is, see Removing an SD Card.
3With the product label facing in the same direction as the display screen, insert your card into the slot.
4Push the card firmly into the slot until it is seated in the connector.
Removing an SD Card
To remove an SD Card, follow these easy steps:
1Select Safely Remove Hardware from the System Tray. Highlight the card in the list, then click [Stop].
2Push the SD Card in until it unlatches. It will then eject from the slot for removal.
INSTALLING OR REMOVING AN SD CARD DURING YOUR STYLISTIC TABLET PC’S SHUTDOWN OR
BOOTUP PROCESS MAY DAMAGE THE CARD AND/OR YOUR STYLISTIC TABLET PC.
DO NOT INSERT A CARD INTO A SLOT IF THERE IS WATER OR ANY OTHER SUBSTANCE ON THE CARD AS
YOU MAY PERMANENTLY DAMAGE THE CARD, YOUR STYLISTIC TABLET PC, OR BOTH.
SEE YOUR CARD MANUAL FOR SPECIFIC INSTRUCTIONS ON THE REMOVAL OF YOUR CARD. SOME CARDS
MAY REQUIRE YOUR STYLISTIC TABLET PC TO BE IN SLEEP MODE OR OFF WHILE REMOVING THEM.
55
Chapter 4
Troubleshooting Your Tablet PC
Troubleshooting
There may be occasions when you encounter simple setup or operating problems that you can solve on the
spot, or problems with peripheral devices that can be solved by replacing the device. The information in this
section helps you isolate and resolve some of these straightforward issues and identify failures that require
service.
Identifying the Problem
If you encounter a problem, go through the following procedure before pursuing complex troubleshooting:
1Turn off your STYLISTIC Tablet PC.
2Make sure the AC adapter is plugged into your Tablet PC and to an active AC power source.
3Make sure that any cards installed are seated properly. If it appears that there is a problem with a card, remove
the card from the slot, thus eliminating it as a possible cause of failure.
4Make sure that any devices connected to the external connectors are plugged in properly. You can also
disconnect such devices, thus eliminating them as possible causes of failure.
5Turn on your Tablet PC. Make sure it has been off at least 10 seconds before you turn it back on.
6Go through the boot sequence.
7If the problem has not been resolved, refer to the Troubleshooting Table that follows for more detailed
troubleshooting information.
56
- Troubleshooting
8If you have tried the solutions suggested in the Troubleshooting Table without success, contact your support
representative:
Toll free: 1-800-8Fujitsu (1-800-838-5487)
Web site: http://www.computers.us.fujitsu.com/support.
Before you place the call, you should have the following information ready so that the customer support
representative can provide you with the fastest possible solution:
•Product name
•Product configuration number
•Product serial number
•Purchase date
•Conditions under which the problem occurred
•Any error messages that have occurred
•Type of device connected, if any
See the Configuration Label on the bottom of your Tablet PC for configuration and serial numbers.
IF YOU KEEP NOTES ABOUT WHAT YOU HAVE TRIED, YOUR SUPPORT REPRESENTATIVE MAY BE
ABLE TO HELP YOU MORE QUICKLY BY GIVING ADDITIONAL SUGGESTIONS OVER THE PHONE.
57
- Troubleshooting
Specific Problems
Using the Troubleshooting Table
When you have problems with your Tablet PC, try to find the symptoms under the Problem column of the
troubleshooting table for the feature giving you difficulty. You will find a description of common causes
for that symptom under the column Possible Cause and what, if anything, you can do to correct the
condition under Possible Solutions. All possible causes or solutions may not apply to your Tablet PC.
Troubleshooting Table
Audio Problems. . . . . . . . . . . . . . .page 58
Hard Drive Problems. . . . . . . . . . .page 58
Keyboard or Mouse Problems. . . .page 58
Pen Input Problems. . . . . . . . . . . .page 59
USB Device Problems. . . . . . . . . .page 59
Power Failures . . . . . . . . . . . . . . . .page 60
Shutdown and Startup Problems . .page 62
Video Problems . . . . . . . . . . . . . . .page 62
Miscellaneous Problems . . . . . . . .page 63
58
- Troubleshooting
Problem Possible Cause Possible Solutions
Audio Problems
There is no sound coming
from the built-in speaker. The volume is turned too low. Adjust the volume control on your Tablet PC and operating
system. Click the Volume icon in the system tray on the bot-
tom right of the screen. (It looks like a speaker). If the Mute
box has a red circle on it, click on it to deselect it.
Headphones are plugged into
your Tablet PC. Plugging in headphones disables the built-in speaker.
Remove the headphones.
Hard Drive Problems
You cannot access your
hard drive. The wrong drive designator
was used by an application
when a bootable disc was
used to start the Tablet PC.
Verify drive designator used by application is in use by the
operating system. When the operating system is booted from
a CD, drive designations are automatically adjusted.
Security is set so your operat-
ing system cannot be started
without a password.
Verify your password and security settings.
Keyboard or Mouse Problems
You have installed an
optional external key-
board or mouse, and it
does not seem to work.
Your external device is not
properly installed. Re-install your device. See “Device Ports” on page 82.
Your operating system is not
set up with correct software
driver for that device.
Check your device and operating system documentation and
activate the proper driver.
You have connected an
external keyboard or a
mouse and it seems to be
locking up the system.
Your operating system is not
setup with correct driver. Check your device and operating system documentation and
activate the proper driver.
Your system has crashed. Try to restart your Tablet PC.
59
- Troubleshooting
Pen Input Problems
Cursor is not tracking the
pen. Display needs to be cali-
brated See “Calibrating the Display” on page 24. for more informa-
tion.
Tablet is not responding to
the pen System may have crashed. If the Tablet PC does not respond to the pen, connect an
external keyboard to the system to see if it responds to key-
board commands. If the system doesn’t respond to a key-
board, the application or system may have crashed, and it
may be necessary to reboot the system. If the system
responds to a keyboard but not to a pen, contact your local
help desk or reseller, or call Fujitsu Service and Support at 1-
800-8Fujitsu (1-800-838-5487) for further assistance.
Memory Problems
Your System screen in the
Control Panel does not
show the correct amount
of installed memory.
You have a memory
failure. Check for Power On Self Test (POST) messages. See
“Power On Self Test Messages” on page 64.
USB Device Problems
Your system doesn’t rec-
ognize a USB device you
installed, or the device
doesn’t work properly.
The device is not properly
installed. Remove and re-install the device.
The device may have been
installed while an application
was running, so your system
is not aware of its installation.
Close the application and restart your Tablet PC.
Your device may not have the
correct software driver active. See your software documentation and activate the correct
driver.
Problem Possible Cause Possible Solutions
60
- Troubleshooting
Power Failures
You turn on your Tablet PC
and nothing seems to
happen.
The installed battery is com-
pletely discharged or there is
no power adapter installed.
Check the Status Indicator Panel to determine the presence
and condition of the battery. See “Status Indicator Panel” on
page 18. Install a charged battery or a Power adapter.
The battery is installed but is
faulty or very low. When the battery reaches a critically low level, the system is
forced into Sleep mode to avoid a total system power failure.
To correct this problem, either connect an external power
supply (such as the AC adapter), or install a charged battery
in the Tablet PC.
System is at a critical thermal
limit. To avoid damage to heat-sensitive components, the system
enters sleep mode when it gets too hot. System operation
cannot be resumed until the Tablet PC cools off to a tolerable
temperature. Move the Tablet PC to a cooler location.
AC power adapter is not
plugged in properly. Verify that your adapter is connected correctly. See “Power
Sources” on page 35.
The power adapter has no
power from the AC or airline
outlet.
Move the AC cord to a different outlet, or check for a line
switch or tripped circuit breaker. If you are using an auto/air-
line adapter in a car be sure the ignition switch is in the On or
Accessories position.
The power adapter is faulty. Try a different power adapter.
Your STYLISTIC Tablet
PC turns off all by itself. The power management
parameters are set for auto
timeouts which are too short
for your operating needs.
Move the mouse to restore operation. If that fails, push
Power/Suspend/Resume switch. Check your power manage-
ment settings, or close your applications and go to Power
Options located in the Control Panel to adjust timeouts to
better suit your needs.
Your power adapter has failed
or lost its power source. Make sure the adapter is plugged in and the outlet has
power.
Problem Possible Cause Possible Solutions
61
- Troubleshooting
Your STYLISTIC Tablet
PC turns off all by itself.
(continued)
You ignored a low battery
alarm until the battery entered
Dead Battery Suspend mode.
Install a power adapter, then push the Power/Sus-
pend/Resume switch. See “Power Sources” on page 35.
You have a battery failure. Verify the condition of the battery using the Status Indicator
panel. If the battery is shorted, replace or remove it. See
“Status Indicator Panel” on page 18.
Your Tablet PC will not
work on battery alone. The installed battery is dead. Replace the battery with a charged one or use an adapter.
No battery is installed. Install a charged battery.
Battery is improperly installed. Verify that the battery is properly connected by re-installing it.
Your installed battery is faulty. Verify the condition of the battery using the Status Indicator
panel and replace or remove any batteries that are shorted.
See “Status Indicator Panel” on page 18.
The battery seems to
discharge too quickly. The power savings features
may be disabled. Check the Power Options menu settings and adjust accord-
ing to your operating needs.
The brightness is turned all
the way up. Turn down the brightness adjustment. The higher the bright-
ness the more power your display uses.
You’re running an application
that uses a lot of power due to
frequent drive access, or use
of wireless devices.
Use a power adapter for this application when at all possible.
The battery is very old. Replace the battery.
The battery was exposed to
high temperatures. Replace the battery.
The battery is too hot or too
cold. Restore the Tablet PC to normal operating temperature.
Charging icon on the Status Indicator panel will flash when
battery is outside of operating range.
Problem Possible Cause Possible Solutions
62
- Troubleshooting
Shutdown and Startup Problems
The Suspend/Resume
switch does not work. Suspend/Resume
switch is disabled. To enable the button, go to Control Panel -> Power Options
and click on the Advanced tab. In the Power buttons area,
select the “Change what the power button does” option.
There may be application
software. conflict Close all applications and try the button again.
The system powers up
and displays power on
information, but fails to
load the operating system.
You have a secured system
requiring a password to load
your operating system.
Make sure you have the right password. Enter the setup util-
ity and verify the Security settings and modify them as
accordingly. See “BIOS Setup Utility” on page 39.
The boot sequence settings
of the setup utility are not
compatible with your configu-
ration.
Set the operating source by pressing the [F12] key while the
Fujitsu logo is on screen or use the [F2] key and enter the
setup utility and adjust the source settings from the Boot
menu. See “BIOS Setup Utility” on page 39.
Hard drive was not detected. Use BIOS setup utility to auto detect the internal hard drive.
An error message is dis-
played on the screen dur-
ing the boot sequence.
Power On Self Test (POST)
has detected a problem. See the Power On Self Test (POST) messages to determine
the meaning and severity of the problem. Not all messages
are errors; some are simply status indicators. See “Power On
Self Test Messages” on page 64.
Your Tablet PC appears to
change setup parameters
when you start it.
BIOS setup changes were not
saved when made and you
exited the setup utility.
Make sure you select Save Changes And Exit when exiting
the BIOS setup utility.
Video Problems
The display is blank when
you turn on your Tablet
PC.
Power management timeouts
are set for short intervals and
you didn’t see the display go
on and off again.
Move the mouse to restore operation. If that fails, push the
Power/Suspend/Resume switch. (The display may be shut
off by Sleep mode, Auto Suspend or Video Timeout)
Problem Possible Cause Possible Solutions
63
- Troubleshooting
The Tablet PC turned on
with a series of beeps and
the display is blank.
Power On Self Test detected
a failure which does not allow
the display to operate.
Contact your support representative.
The display goes blank by
itself after you have been
using it.
Power management timeouts
are set for short intervals and
you failed to notice the display
come on and go off again.
Push the Power/Suspend/Resume switch. (The display may
be shut off by Sleep Mode, Auto Suspend or Video Timeout)
The Tablet PC has gone into
Sleep or Hibernate mode
because you have not used it
for a period of time.
Push Power/Suspend/Resume switch. Check power man-
agement settings, or close applications and go to the Power
Savings menu of the setup utility to adjust timeout values
to suit your needs. See “BIOS Setup Utility” on page 39.
The display has bright or
dark spots. If the spots are very tiny and
few in number, this is normal
for a large LCD display.
This is normal; do nothing.
If the spots are numerous or
large enough to interfere with
your operation needs.
Display is faulty; contact your support representative.
Miscellaneous Problems
Error message displayed
on the screen during oper-
ation of an application.
Application software often has
its own set of error message
displays.
See your application manual and help displays screens for
more information. Not all messages are errors some may
simply be status.
Problem Possible Cause Possible Solutions
64
- Troubleshooting
Power On Self Test Messages
The following is a list of error-and-status messages that the Phoenix BIOS and/or your operating system
can generate and an explanation of each message. Error messages are marked with an *. If an error message
is displayed that is not in this list, write it down and check the operating system documentation on screen
and in the manual. If you can find no reference to the message, contact a support representative.
*Invalid NVRAM Data
Problem with NVRAM access. In the unlikely case that you see this message you may have a display
problem. You can continue operating but should contact your support representative for more information.
*Operating system not found
Operating system cannot be located on either drive A: or drive C: Enter the setup utility and see if both the
fixed disk, and drive A: are properly identified and that the boot sequence is set correctly. Unless you have
changed your installation greatly, the operating system should be on drive C:. If the setup utility is correctly
set, your hard drive may be corrupted.
*Real time clock error - Check date and time settings
Real-time clock fails BIOS test. May require board repair. Contact your support representative.
65
- Restoring Your Pre-installed Software
Restoring Your Pre-installed Software
Packed with your system you will find two discs for recovering your pre-installed software:
•Drivers and Applications Restore Disc
•Recovery and Utility Disc
Drivers and Applications Restore Disc
The Drivers and Applications Restore (DAR) disc included with your system contains sets of device
drivers and Fujitsu utilities (in specific directories) that are unique to your computer configuration.
Re-installing Individual Drivers and Applications
The Drivers and Applications disc can be used to selectively re-install drivers and/or applications that may
have been un-installed or corrupted.
To re-install drivers and/or applications:
1Boot up the system and insert the DAR disc after Windows has started. A Fujitsu Installer screen is displayed
after the disc is inserted.
2After reading the License Agreement, click [I agree].
3A window will appear containing a list of applications, drivers, and utilities that you can install from the DAR disc.
IF YOU HAVE ACCESS TO THE INTERNET, VISIT THE FUJITSU SUPPORT WEBSITE AT HTTP://
WWW.COMPUTERS.US.FUJITSU.COM/SUPPORT TO CHECK FOR THE MOST CURRENT INFORMATION,
DRIVERS AND HINTS ON HOW TO PERFORM RECOVERY AND SYSTEM UPDATES.
THERE MAY BE CERTAIN FREE THIRD-PARTY APPLICATIONS PRE-INSTALLED ON YOUR SYSTEM THAT ARE
NOT ON THE DAR DISC. THE LATEST VERSIONS OF THE APPLICATIONS CAN BE DOWNLOADED FROM THE
THIRD-PARTY’S WEBSITE.
66
- Restoring Your Pre-installed Software
4In the list, check off all the components you want to install. If you want to install all components, click [Select
All]. Clicking [Select All] will select all of the blue-coded components; you must select grey and green
components separately.
5Once you have selected the components you wish to install, click [Install Selected Subsystems]; the
components will be installed.
6After the components are installed, click [OK], then click [Yes] when asked if you want to reboot the system.
Recovery and Utility disc
The Recovery and Utility disc contains six utilities:
Recovery and Utility tabs
•Diagnostics tab: The Diagnostics tool is designed for use by IT professionals. It is not likely you
will need to use this tool. When you select devices from the Diagnosis window then click [Execute],
several tests are performed on the selected components.
•Recovery tab: The Recovery tab contains two tools:
Restoring the Factory Image (only C: drive) and Restoring the Factory Image (full hard drive
recovery). You can use these tools to perform a full hard drive recovery.
•Utility tab: The Utility tab contains three tools: Hard Disk Data Delete, Restore Recovery and
Utility, and Windows Complete PC Restore.
•The Hard Disk Data Delete utility is used to delete all data on the hard disk and prevent the
data from being reused. NOTE: Do not use the Hard Disk Data Delete utility unless you are
absolutely certain that you want to erase your entire hard disk, including all partitions.
•Restore Recovery and Utility allows you to restore the first hidden partition.
THE COMPONENTS LISTED ARE COLOR-CODED IN TERMS OF THEIR INSTALL STATUS. BLUE INDICATES
THAT THE COMPONENT CAN BE INSTALLED. GREEN INDICATES THAT THE COMPONENT NEEDS TO BE
INSTALLED SEPARATELY. GREY INDICATES A COMPONENT THAT IS ALREADY INSTALLED; GREY ITEMS
CAN BE REINSTALLED, BUT PRIOR TO INSTALLATION YOU WILL RECEIVE A REMINDER THAT THE
COMPONENT IS ALREADY INSTALLED.
67
- Restoring Your Pre-installed Software
•Windows Complete PC Restore utility allows you to restore an image created with Windows
Backup and Restore Center. Windows Complete PC Restore will overwrite the data on your
hard disk drive.
•The Diagnostics utility allows the IT professional to determine device status/condition by
executing diagnostics tests on selected system components.
To use the disc, follow the instructions in the “Using the Recovery and Utility Disc” booklet that is pack-
aged with the disc.
68
- Restoring Your Pre-installed Software
69
- Restoring Your Pre-installed Software
70
Chapter 5
Care and Maintenance
Caring for your Tablet PC
If you use your STYLISTIC Tablet PC carefully, you will increase its life and reliability. This section
provides some tips for looking after the Tablet PC and its devices.
•Your STYLISTIC is a durable but sensitive electronic device. Treat it with respect and care.
•Make a habit of transporting it in a suitable carrying case.
THE SYSTEM CONTAINS COMPONENTS THAT CAN BE SEVERELY DAMAGED BY ELECTROSTATIC
DISCHARGE (ESD). TO MINIMIZE RISK TO THE COMPONENTS, OBSERVE THE FOLLOWING PRECAUTIONS:
•IF YOU DROP YOUR TABLET PC OR DAMAGE THE HOUSING IN ANY WAY, IMMEDIATELY TURN OFF POWER
AND DISCONNECT THE POWER PLUG. FAILURE TO DO SO COULD RESULT IN A SHORT CIRCUIT, SMOKE,
AND/OR FIRE. CONTACT FUJITSU SERVICE AND SUPPORT BY PHONE AT 1-800-8FUJITSU (1-800-838-
5487), BY EMAIL AT 8FUJITSU@US.FUJITSU.COM, OR THROUGH THE WEBSITE AT
HTTP://WWW.COMPUTERS.US.FUJITSU.COM/SUPPORT TO LEARN HOW TO GET THE SYSTEM REPAIRED.
•BEFORE DOCKING OR UNDOCKING YOUR TABLET PC (WHEN USING A DOCKING CRADLE), IT IS GOOD
PRACTICE TO TOUCH A GROUNDED METAL OBJECT TO DISCHARGE STATIC ELECTRICITY IN YOUR BODY.
•ELECTRICAL EQUIPMENT MAY BE HAZARDOUS IF MISUSED. OPERATIONS OF THIS PRODUCT OR SIMILAR
PRODUCTS, MUST ALWAYS BE SUPERVISED BY AN ADULT. DO NOT ALLOW CHILDREN ACCESS TO THE
INTERIOR OF ANY ELECTRICAL PRODUCTS AND DO NOT PERMIT THEM TO HANDLE ANY CABLES.
71
- Care and Maintenance
•Do not attempt to service the computer yourself. Always follow installation instructions closely.
•Keep it away from food and beverages.
•If you accidentally spill liquid on your STYLISTIC Tablet PC:
1Turn it off.
2Position it so that the liquid can run out and let it dry out for 24 hours, or longer if needed.
3If your Tablet PC will not boot after it has dried out, call your support representative.
•Do not use your Tablet PC in a wet environment (near a bathtub, swimming pool).
•Always use the AC adapter and batteries that are approved for your Tablet PC.
•Avoid exposure to sand, dust and other environmental hazards.
•Do not expose your Tablet PC to direct sunlight for long periods of time as temperatures above 140°
F (60° C) may damage your Tablet PC.
•Do not put heavy or sharp objects on the computer.
Cleaning your Tablet PC
•Always disconnect the power plug. (Pull the plug, not the cord.)
•Clean your STYLISTIC Tablet PC with a damp, lint-free cloth. Do not use abrasives or solvents.
•Use a soft cloth to remove dust from the screen. Never use glass cleaners.
•Always shut down the computer, unplug the power adapter, and remove the battery when cleaning
or disinfecting the computer exterior or LCD display.
Cleaning guidelines using recommended off-the-shelf cleaners
Computer exterior. To clean the exterior, use one of the following off-the-shelf products:
•Office Depot® #154-616 Notebook Cleaning Kit
•Meridrew Enterprises Klear Screen® Wipes
•3M CL563 Cleaner Wipes
Note: After cleaning with one of these products, gently polish with a dry, soft, lint-free cloth until the
solution is no longer visible.
72
- Care and Maintenance
Disinfecting STYLISTIC computers
Wipe the surface with a soft cloth wipe and a 50% ethanol solution or use another ethanol-based germicide
which has been registered as a hospital disinfectant by the EPA.
Storing your Tablet PC
•If storing your Tablet PC for a month or longer, turn it off, fully charge the battery, then remove and
store all Lithium Polymer batteries.
•Store your Fujitsu STYLISTIC in a cool, dry location. Temperatures should remain between 13ºF
(-25ºC) and 140ºF (60ºC).
•Store your tablet and batteries separately. If you store your system with a battery installed, the
battery will discharge, and battery life will be reduced. In addition, a faulty battery might damage
your system.
•USE OF INCORRECT CLEANERS CAN RESULT IN OPTICAL IMPAIRMENT OF THE LCD AND/OR DAMAGE TO THE
COMPUTER. ALWAYS REFER TO THE CLEANER MANUFACTURER'S GUIDELINES AND MATERIAL SAFETY DATA SHEETS
FOR PROPER HANDLING AND USE OF THE PRODUCTS.
•NEVER USE AMMONIA, ACIDIC, OR ALKALINE CLEANERS OR ORGANIC CHEMICALS SUCH AS PAINT THINNER,
ACETONE, PROPYL OR ISOPROPYL ALCOHOL, OR KEROSENE. IT MAY DAMAGE SURFACE FINISHES AND THE
COATING OF THE LCD SCREEN.
•NEVER USE COMPRESSED AIR FOR CLEANING YOUR COMPUTER.
•ALWAYS POWER OFF THE COMPUTER BEFORE TRANSPORTING AND/OR PACKAGING IT. AFTER SHUTTING DOWN
THE SYSTEM, WAIT UNTIL THE STATUS LED PANEL INDICATES POWER OFF CONDITION (I.E., NO LIGHTS ARE
ILLUMINATED).
•IT IS POSSIBLE THAT THE UNIT MAY NOT AUTOMATICALLY GO TO POWER OFF OR HIBERNATE MODE WHEN YOU
CLOSE THE LID. THIS SITUATION MAY OCCUR DUE TO PRE-OS BOOT PASSWORD SECURITY SETTINGS OR SOME
OTHER APPLICATION RUNNING ON THE COMPUTER.
•ATTEMPTING TO TRANSPORT THE COMPUTER WHILE POWER IS ON MAY DAMAGE THE TABLET PC DUE TO SHOCK
OR OVERHEATING.
73
- Care and Maintenance
Traveling with your Tablet PC
•Do not transport your Tablet PC while it is turned on.
•You should carry your Tablet PC with you while traveling, rather than checking it in as baggage.
•Never put your Tablet PC through a metal detecto; have it hand-inspected by security personnel.
You can however, put your Tablet PC through a properly tuned X-ray machine. To avoid problems,
place it close to the entrance of the machine and remove it as soon as possible or have it hand-
inspected by security personnel. Security officials may require you to turn your system on, so make
sure you have a charged battery on hand.
•Take the necessary plug adapters if you're traveling overseas. Check the following diagram to
determine which plug adapter you'll need or ask your travel agent.
Batteries
Caring for your Battery
•Always handle batteries carefully.
•Do not short-circuit the battery terminals (that is, do not touch both terminals with a metal object).
Do not carry lose batteries in a pocket or purse where they may mix with coins, keys, or other metal
objects. Doing so may cause an explosion or fire.
Outlet Type Location Outlet Type Location
United States, Canada, parts of Latin
America, Mexico, Japan, Korea,
the Philippines, Taiwan
United Kingdom,
Ireland, Malaysia,
Singapore, parts of Africa
Russia and the Commonwealth of Independent
States (CIS), most of Europe, parts of Latin
America, the Middle East, parts of Africa, Hong
Kong, India, most of South Asia
China, Australia, New
Zealand
74
- Care and Maintenance
•Do not drop, puncture, disassemble, mutilate or incinerate the battery.
•Recharge batteries only as described in this manual and only in ventilated areas.
•Do not leave batteries in hot locations for more than a day or two. Intense heat can shorten the life
of your battery.
•Do not leave a battery in storage for longer than 6 months without recharging it.
Increasing Battery Life
•Power your Tablet PC through the AC or optional auto/airline adapter whenever possible.
•If your tablet runs on battery power all day, connect it to an AC adapter overnight to recharge it.
•Keep brightness to the lowest level comfortable.
•Set the power management for maximum battery life.
•Put your Tablet PC in Sleep mode when it is turned on and you are not actually using it.
•Limit your media drive access.
•Disable the Media Player auto insert notification function.
Media Care
Caring for your Media (when optional external optical drive is installed)
Media discs are precision devices and will function reliably if given reasonable care.
•Always store your media disc in its case when it is not in use.
•Always handle discs by the edges and avoid touching the surface.
•Avoid storing any media discs in extreme temperatures.
•Do not bend or scratch media discs or set heavy objects on them.
•Do not spill liquids or get dust on media discs.
•Never write on the label surface with a ballpoint pen or pencil. Always use a felt pen.
•If a disc is dirty, use only a DVD/CD cleaner or wipe it with a clean, soft, lint free cloth starting
from the inner edge and wiping to the outer edge.
75
- Care and Maintenance
•If a disc is subjected to a sudden change in temperature, condensation may form on the surface.
Wipe moisture off with a soft, lint free cloth and let it dry at room temperature. DO NOT use a hair
dryer or heater to dry media discs.
Caring for an Optional Optical Drive
An optional optical drive is durable but you must treat it with care. Please pay attention to the following
points:
•The drive rotates the compact disc at a very high speed. Do not carry it around or subject it to shock
or vibration with the power on.
•Avoid using or storing the drive where it will be exposed to extreme temperatures.
•Avoid using or storing the drive where it is damp or dusty.
•Avoid using or storing the drive near magnets or devices that generate strong magnetic fields.
•Avoid using or storing the drive where it will be subjected to shock or vibration.
•Do not disassemble or dismantle the optical drive.
•Use of a commercially available lens cleaner is recommended for maintenance of your drive.
Secure Digital Cards
Caring for your Cards
Secure Digital Cards are durable, but you must treat them with care. The documentation supplied with
your card will provide specific information, but you should pay attention to the following points:
•To keep out dust and dirt, store cards in their protective sleeves when they are not installed.
•Avoid prolonged exposure to direct sunlight or excessive heat.
•Keep the cards dry.
•Do not flex or bend the cards, and do not place heavy objects on top of them.
•Do not force cards into the slot.
•Avoid dropping cards, or subjecting them to excessive vibration.
76
Chapter 6
System Specifications
Specifications
This section provides the hardware and environmental specifications for your Fujitsu STYLISTIC Tablet
PC. Specifications of particular configurations will vary.
Configuration Label
The configuration label located on the bottom of your Tablet PC contains specific information regarding the
options you’ve chosen for your Tablet PC. Following is an example configuration label.
AOUXXXXXXXXXXXXX
STQ550, AtomZ670, W7Pro, 2GB, 62G, WLAN, 10.1WXGA
FPC P/N: FPCMXXXXX
Configuration P/N:
Hard Drive
Part Number
Processor
Model # Memory
Operating System Screen Size/Type
Configuration ID
Communications
77
- Specifications
Microprocessor
Intel® Atom™ Z670 processor (1.5 GHz)
Chipset
•Intel SM35
Memory
System Memory
•DDR2-800 MHz SDRAM memory module.
•Fixed 2GB of total memory (onboard).
Cache Memory
512 kB L2 cache on-die
Video
Video Color and Resolution
Anti-glare 10.1" Wide XGA LED backlit IPS display
•Internal: 1280 x 800 pixel resolution, 16M colors
•External: 1280x720 pixel resolution, 16M colors
•Simultaneous: 1280 x 800, 16M colors
•160° vertical and horizontal viewing angles
Digitizer
N-trig® DuoSense® technology. Dual Digitizer, consisting of active digitizer and capacitive touch panel
(uses active stylus input and up to four finger touch input).
Video RAM
Intel® GMA600 video graphics controller with 3D Accelerator. Maximum 759 MB UMA VRAM
78
- Specifications
Audio
•Realtek codec ALC269
•Headphones: Stereo headphone jack, 3.5 mm, 1 Vrms or less, minimum impedance 32 Ohms
•One built-in speaker, 18 mm diameter
•Two built-in dual analog microphones
Mass Storage Device Options
Hard Drive Options
•FDE Solid State Drive, S-ATA/300 (3.0Gbps), 62 GB, with TRIM command support
•FDE Solid State Drive, S-ATA/300 (3.0Gbps), 30 GB, with TRIM command support
Communications
•WLAN: Ralink RT3572 802.11a/b/g/n Wireless LAN USB Device
•Bluetooth: Broadcom BCM20702 Bluetooth USB device for wireless personal area network
communication
•WWAN: Optional integrated 3G Wireless Wide Area Network, Gobi3000 (Sierra Wireless
AirPrime™ MC8355)
Security Features
Trusted Platform Module
The STYLISTIC Q550 Tablet PC may have an optional Trusted Platform Module (TPM) installed for
added system security.
Fingerprint Recognition Sensor
Swipe sensor for biometric security.
SmartCard Slot
Integrated SmartCard slot (requires third-party application)
79
- Specifications
Device Ports
On the STYLISTIC Tablet PC:
•SD Card slot
•One USB 2.0 (Universal Serial Bus) connectors for input/output devices
•One DC In connector
•One HDMI connector
•Docking port (100-pin, to dock with optional STYLISTIC Docking Cradle)
•One stereo headphone jack
•1.3 megapixel rear-facing web camera, VGA front-facing web camera
On the Optional STYLISTIC Docking Cradle
•Four USB 2.0 connectors for input/output devices
•One DC-in connector
•One docking connector (100-pin, to dock with Tablet PC
Power
Battery Otions
•Lithium Polymer Battery, 2 cells, 7.2V, 19Wh, 2620 mAh
•Lithium Polymer Battery, 4 cells, 7.2V 38Wh 5240 mAh
AC Adapter
Autosensing 100-240V AC, supplying 19V DC, 2.1A, 40W to the Tablet PC; includes an AC cable
Power Management
Conforms to ACPI (Advanced Configuration and Power Interface).
80
- Specifications
Dimensions and Weight
Overall Dimensions
Approximately 10.8" (w) x 7.56" (d) x 0.64" (h) (275 x 192 x 16.2 mm)
Environmental Requirements
Temperature
Operating: 41° to 95° F (5° to 35° C). Non-operating: 5° to 140° F (–15° to 60° C)
Humidity
Operating: 20% to 85%, relative, non-condensing. Non-operating: 8% to 85%, relative, non-condensing
Altitude
Operating: 10,000 feet (3,048 m) maximum
Popular Accessories
For ordering or additional information on Fujitsu accessories please visit our Web site at
www.shopfujitsu.com or call 1-800-FUJITSU.
Included Software
Depending on your pre-installed operating system, your Tablet PC comes with software for playing audio
and video files of various formats. In addition there is virus protection software and Power Management
software. The following list indicates the software included with your system.
•Adobe® Reader
•Norton Internet Security™ (60-day free trial)
•FujitsuHL
•OmniPass® Fingerprint application
•Nuance® Keyboard/Handwriting Input
•Microsoft Office Starter 2010
81
- Specifications
Learning About Your Software
Tutorials
All operating systems and most application software have tutorials built into them upon installation. We
highly recommend that you step through the tutorial before you use an application.
Manuals
Included with your Tablet PC you will find manuals for your installed operating system and other pre-
installed software. Any manuals that are not included, are available online through the help system of the
software. We recommend that you review these manuals for general information on the use of these
applications.
Adobe Reader
The Adobe Reader allows you to view, navigate, and print PDF files from across all of the major
computing platforms.
FujitsuHL
FujitsuHL provides a variety of tools and shortcuts to commonly-used applications and utilities. Among
the features offered by FujitsuHL are the camera application for use with the built-in web camera, a
calculator, and links to applications such as Explorer.
Norton Internet Security - TBD TBD
Your system is preinstalled with a free 60-day trial version of Symantec’s Norton Internet Security™.
Norton Internet Security is a suite of tools designed to protect your Tablet PC from computer viruses,
hackers, spyware, and spam. It assists in the protection of data currently on your hard disk from
destruction or contamination. The trial version is activated upon your acceptance of software license
agreement. After 60 days, you will need to purchase a subscription from Symantec to download latest
virus, spyware, and spam definitions.
82
- Specifications
OmniPass® Fingerprint application
The fingerprint sensor uses Softex OmniPass which provides password management capabilities to
Microsoft Windows operating systems. OmniPass lets you use a "master password" for all Windows,
applications, and on-line passwords, and presents a convenient user interface through which you can
securely manage passwords, users, and multiple identities for each user.
Nuance® XT9® Keyboard/Handwriting Input
A predictive text application that allows you to quickly complete your tasks with a number of tools,
including next-word prediction, enhanced word completion, automatic spell correction, auto-accenting,
and smart punctuation.
Microsoft Office Starter 2010 (32-bit)
Microsoft Office Starter 2010 includes reduced-functionality versions of Microsoft Word and Microsoft
Excel that include advertising.Microsoft PowerPoint, Microsoft Outlook, and Microsoft Publisher are not
included. Customers must purchase an Office 2010 Disc, PKC (Product Key Card), or select one of the
full Microsoft Office 2010 suites to activate full-featured Office software on the PC.
Fujitsu offers a PKC (Product Key Card) for Microsoft Office Home and Student 2010 and Microsoft
Office Home and Business 2010 (32-bit). Simply enter your product key and you’re ready to go!
Another option is to purchase a full Microsoft Office 2010 suite from either your computer reseller or
online from Microsoft.
Operating System
The following operating system configuration is installed on your system:
Microsoft Windows 7 Professional Edition
83
- Regulatory Information
Regulatory Information
Notice
Changes or modifications not expressly approved by Fujitsu could void this user’s authority to operate the equipment.
FCC NOTICES
Notice to Users of Radios and Television
This equipment has been tested and found to comply with the limit for class B digital devices, pursuant to parts 15 of the FCC
Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet that is on a different circuit than the receiver.
•Consult the dealer or an experienced radio/TV technician for help.
Shielded interconnect cables must be employed with this equipment to ensure compliance with the pertinent RF emission limits
governing this device.
DOC (INDUSTRY CANADA) NOTICES
Notice to Users of Radios and Television
This Class B digital apparatus meets all requirements of Canadian Interference-Causing Equipment Regulations.
CET appareil numérique de la class B respecte toutes les exigence du Réglement sur le matérial brouilleur du Canada.
84
Appendix A: WLAN User’s Guide
FCC Regulatory Information
Please note the following regulatory information related to the optional wireless LAN device.
Regulatory Notes and Statements
Wireless LAN, Health and Authorization for use
Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions, however,
are far much less than the electromagnetic energy emissions from wireless devices such as mobile phones. Wireless LAN
devices are safe for use by consumers because they operate within the guidelines found in radio frequency safety standards and
recommendations. The use of Wireless LAN devices may be restricted in some situations or environments, such as:
•On board an airplane, or
•In an explosive environment, or
•In situations where the interference risk to other devices or services is perceived or identified as harmful.
In cases in which the policy regarding use of Wireless LAN devices in specific environments is not clear (e.g., airports,
hospitals, chemical/oil/gas industrial plants, private buildings), obtain authorization to use these devices prior to operating the
equipment.
85
Regulatory Information/Disclaimers
Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user
documentation provided with the product. Any changes or modifications made to this device that are not expressly approved
by the manufacturer may void the user’s authority to operate the equipment. The manufacturer is not responsible for any radio
or television interference caused by unauthorized modification of this device, or the substitution or attachment of connecting
cables and equipment other than those specified by the manufacturer. It is the responsibility of the user to correct any
interference caused by such unauthorized modification, substitution or attachment. The manufacturer and its authorized
resellers or distributors will assume no liability for any damage or violation of government regulations arising from failure to
comply with these guidelines.
This device must not be co-located or operated in conjunction with any other antenna or transmitter.
For IEEE 802.11a Wireless LAN: For operation within 5.15~5.25 GHz frequency range, it is restricted to indoor
environments, and the antenna of this device must be integral.
Federal Communications Commission statement
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause interference, and, (2) This device must
accept any interference, including interference that may cause undesired operation of this device.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions,
it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
1Reorient or relocate the receiving antenna.
2Increase the distance between the equipment and the receiver.
3Connect the equipment to an outlet on a circuit different from the one the receiver is connected to.
4Consult the dealer or an experienced radio/TV technician for help.
Figure A-1. Ad Hoc Mode Network
86
FCC Radio Frequency Exposure statement
The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no
proof, however, that these low power wireless devices are absolutely safe. Low power wireless devices emit low levels of radio frequency
energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to
low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposure have not
found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been
confirmed by additional research.
The wireless LAN radio device has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled
equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65.
Export restrictions
This product or software contains encryption code which may not be exported or transferred from the US or Canada without
an approved US Department of Commerce export license. This device complies with Part 15 of FCC Rules., as well as ICES
003 B / NMB 003 B. Operation is subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesirable operation.
Modifications not expressly authorized by Fujitsu America, Inc. may invalidate the user's right to operate this equipment.
Canadian Notice
The device for the 5150 - 5250 MHz band is only for indoor usage to reduce the potential for harmful interference to co-channel
mobile satellite systems.
The maximum antenna gain of 6 dBi permitted (for devices in the 5250 - 5350 MHz, 5470 - 5725 MHz and 5725 - 5825 MHz
bands) to comply with the e.i.r.p. limit as stated in A9.2 of RSS210.
In addition, users are cautioned to take note that high power radars are allocated as primary users (meaning they have priority)
of 5250 - 5350 MHz and 5650 - 5850 MHz and these radars could cause interference and/or damage to LE-LAN devices.
87
Before Using the Optional Wireless LAN
Before Using the Optional Wireless LAN
This manual describes the procedures required to properly set up and configure the optional integrated
Wireless LAN USB device (referred to as "WLAN device" in the rest of the manual). Before using the
WLAN device, read this manual carefully to ensure its correct operation. Keep this manual in a safe place
for future reference.
Wireless LAN Device Covered by this Document
This document is applicable to systems containing the following device:
•Integrated Ralink RT3572 802.11a/b/g/n Wireless LAN USB Device
Characteristics of the WLAN Device
•The WLAN device is a USB module attached to the main board of the mobile computer.
•The WLAN device operates in license-free RF bands, eliminating the need to procure an FCC operating
license. The WLAN operates in the 2.4GHz Industrial, Scientific, and Medical (ISM) RF band and the lower,
middle, and upper bands of the 5GHz Unlicensed National Information Infrastructure (UNII) bands.
•The WLAN devices are capable of four operating modes, IEEE802.11a, IEEE802.11b, IEEE802.11g, and
IEEE802.11n
•The WLAN devices are Wi-Fi certified and operate (as applicable) at a the maximum data rate of 150 Mbps
(theoretical) in IEEE802.11n mode; 54 Mbps in IEEE802.11a or IEEE802.11g mode; and 11 Mbps in
IEEE802.11b mode.
•The WLAN devices support the following encryption methods - WEP, TKIP, CKIP, and AES encryption.
•The Wireless LAN devices are compliant with the following standards: WPA, WPA2, CCX1.0, CCX2.0,
CCX3.0, CCX4.0, and CCX5.0.
88
Before Using the Optional Wireless LAN
Wireless LAN Modes Using this Device
Ad Hoc Mode
"Ad Hoc Mode" refers to a wireless network architecture where wireless network connectivity between
multiple computers is established without a central wireless network device, typically known as Access
Point(s). Connectivity is accomplished using only client devices in a peer-to-peer fashion. That is why Ad
Hoc networks are also known as peer-to-peer networks. Ad Hoc networks are an easy and inexpensive
method for establishing network connectivity between multiple computers. Ad Hoc mode requires that the
SSID, network authentication, and encryption key settings are identically configured on all computers in
the Ad Hoc network.
Figure 23. Ad Hoc Mode Network
89
Before Using the Optional Wireless LAN
Access Point (Infrastructure) Mode
Infrastructure mode refers to a wireless network architecture in which devices communicate with wireless
or wired network devices by communicating through an Access Point. In infrastructure mode, wireless
devices can communicate with each other or with a wired network. Corporate wireless networks operate
in infrastructure mode because they require access to the WLAN in order to access services, devices, and
computers (e.g., file servers, printers, databases).
Figure 24. Access Point (Infrastructure) Mode Network
ADSL modem,
cable modem,
or similar
Internet Wired LAN
Access Point*
Wireless LAN *An optional hub for a wired
LAN may be required depending
upon the type of access point used.
90
Before Using the Optional Wireless LAN
How to Handle This Device
The WLAN device is an optional device that may come pre-installed in your mobile computer. Under
normal circumstances, it should not be necessary for you to remove or re-install it. The operating system
that your mobile computer comes with has been pre-configured to support the WLAN device.
•The Wireless LAN devices support IEEE802.11a, IEEE802.11b, IEEE802.11g, and IEEE802.11n.
•The WLAN devices operate in the 2.4 GHz ISM band and the 5 GHz lower, middle, and upper UNII bands.
•Microwave ovens may interfere with the operation of WLAN devices since they operate in the same 2.4 GHz
frequency range as IEEE802.11b/g/n devices. Interference by microwaves does not occur with IEEE802.11a
radio which operates in the 5 GHz RF band.
•Wireless devices that transmit in the 2.4 GHz range may interfere with operation of WLAN devices in
IEEE802.11b/g/n modes. Symptoms of interference include reduced throughput, intermittent disconnects,
and many frame errors. It is HIGHLY recommended that these interfering devices be powered off to ensure
proper operation of the WLAN device.
Deactivating/Disconnecting the WLAN Device
Disconnecting the WLAN device may be desired in certain circumstances (to extend battery life) or where
certain environments require it (i.e. hospitals, clinics, airplanes, etc.). The WLAN device can be
deactivated by using the Wireless On/Off Switch, and it can be disconnected in Windows using the WLAN
icon in the system tray (Note that disconnecting via the icon in the system tray does not turn off the radio;
it continues to transmit and receive even though it’s not connected.).
BEFORE USING THE WIRELESS LAN DEVICE, YOU MUST FIRST INSTALL CLICKME! TO ENSURE THAT
THE CORRECT SOFTWARE FOR YOUR DEVICE IS INSTALLED. SEE “INSTALLING CLICKME!” ON PAGE 42.
91
Before Using the Optional Wireless LAN
Deactivation Using the Wireless On/Off Switch
The WLAN device can be deactivated quickly and efficiently by toggling the Wireless Device On/Off
Switch to the Off position. The switch has no effect on non-Wireless LAN models.
Figure 25. Wireless LAN/Bluetooth On/Off Switch Location
Disconnection Using the Icon in the Taskbar
Note that disconnecting via the icon in the system tray does not turn off the radio; it continues to transmit
and receive even though it’s not connected.
1Right-click the WLAN icon in the taskbar at the bottom right of your screen.
2Choose Disconnect from a network.
Activating the WLAN Device
Activation of the WLAN device can be accomplished using the same methods as the deactivation process
•Using the Wireless On/Off Switch
•In Windows, by right-clicking the WLAN icon then clicking “Connect to a network”
Wireless Device Switch
92
Configuring the Wireless LAN
Configuring the Wireless LAN
The WLAN device can be configured to establish wireless network connectivity using the software that
is built into Windows. Support for most industry standard security solutions is contained in this software.
Pre-defined parameters will be required for this procedure. Please consult with your network
administrator for these parameters:
Configuring the WLAN
1Click the Start button, then select Control Panel.
2If the Control Panel is not in Classic View, select Classic View from the left panel. Double-click the Network
Connections icon.
3Double-click on the Wireless Network Connection icon.
4Click on [View Wireless Networks]
5Choose a wireless network.
6Click [Connect].
7Enter the Network Key, if required.
8Enter any required information. It may be necessary to consult with your network administrator for some of the
information.
9If you require assistance, go to [Start] -> Help and Support -> Networking and the Web. Select the main topic
in which you are interested, then type in relevant keywords in the Search box.
Connection to the network
After you have configured your computer, you can connect to an active network by performing the
following steps:
1Click on the WLAN icon in the system tray.
2Select “Connect to a network”.
3Select a network from the list that appears, and click the [Connect] button.
After you have configured your computer, you can connect to an active network by clicking on the
Wireless Network icon in the system tray:
93
Troubleshooting the WLAN
Troubleshooting the WLAN
Troubleshooting
Causes and countermeasures for troubles you may encounter while using your wireless LAN are described
in the following table. If you are unfamiliar with the steps required, consult your System Administrator or
go to [Start] -> Help and Support -> Networking and the Web
Problem Possible Cause Possible Solution
Unavailable
network
connection
Incorrect network
name (SSID) or
network key
Ad hoc connection: verify that the network names (SSID’s) and network keys
(WEP) of all computers to be connected have been configured correctly. SSID’s
and WEP key values must be identical on each machine.
Access Point (Infrastructure) connection: set network name (SSID) and
network key to the same values as those of the access point.
Set the Network Authentication value identically to that of the Access Point.
Please consult your network administrator for this value, if necessary.
Weak received
signal strength
and/or link quality
Ad hoc connection: Retry connection after shortening the distance to the
destination computer or removing any obstacles for better sight.
Access Point (Infrastructure) connection: Retry connection after shortening the
distance to the access point or removing any obstacles for better transmission.
The WLAN device
has been
deactivated or
disabled
Check if the wireless switch is turned On. Go to Start -> Control Panel, and
double-click on Windows Mobility Center. If the wireless network is off, click the
[Turn wireless on] button.
The computer to be
connected is turned
off
Check if the computer to be connected is turned ON.
94
Troubleshooting the WLAN
Unavailable
network
connection
(continued)
RF interference from
Access Points or
other wireless
networks
The use of identical or overlapping RF channels can cause interference with the
operation of the WLAN device. Change the channel of your Access Point to a
channel that does not overlap with the interfering device.
Wireless network
authentication has
failed
Re-check your Network Authentication, Encryption, and Security settings.
Incorrectly configured security settings such as an incorrectly typed WEP key,
a misconfigured LEAP username, or an incorrectly chosen authentication
method will cause the LAN device to associate but not authenticate to the
wireless network.
Incorrectly
configured network
settings
Recheck the configuration of your network settings.
Incorrect IP address
configuration This only applies to networks using static IP addresses. Please contact your
network administrator for the correct settings.
Problem Possible Cause Possible Solution
95
WLAN Specifications
WLAN Specifications
Specifications
Item Specification
Type of network The integrated Ralink RT3572 802.11a/b/g/n Wireless LAN USB Device conforms to
IEEE 802.11a, 802.11b/g, and 802.11n, Wi-Fi based*.
Transfer rate (Automatic switching) 150 Mbps maximum data rate
Active frequency •802.11n: 2.4 GHz or 5 GHz
•802.11b/g: 2400~2473 MHz
•802.11a: 4900 ~ 5850 MHz
Typical operating distances** •802.11a: 40 ft. (12 m) @ 54 Mbps; 300 ft. (91 m) @ 6 Mbps
•802.11b: 100 ft. (30 m) @ 11 Mbps; 300 ft. (91 m) @ 1 Mbps
•802.11g: 100 ft. (30 m) @ 54 Mbps; 300 ft. (91 m) @ 1 Mbps
•802.11n: Estimated double the operating distance of 802.11g and 802.11a in
their respective frequencies.
Number of channels •802.11a: 8 independent channels
•802.11b/g: 11 channels, 3 non-overlapping channels
•802.11n: 2.4 GHz - 3 non-overlapping channels when Channel Bonding is not
used; 2 non-overlapping channels when Channel Bonding is used.
5 GHz - 12 non-overlapping UNII channels with or without Channel Bonding
Security Encryption Types - WEP, TKIP, AES***, WPA 1.0 compliant
Maximum recommended number
of computers to be connected
over wireless LAN (during ad hoc
connection)
10 units or less ****
96
WLAN Specifications
* “Wi-Fi based” indicates that the interconnectivity test of the organization which guarantees the interconnectivity of
wireless LAN (Wi-Fi Alliance) has been passed.
** The communication ranges shown above will increase or decrease depending on factors such as number of walls, reflective
material, or interference from external RF sources.
*** Encryption with network key (WEP) is performed using the above number of bits, however, users can set 40 bits/ 104
bits after subtracting the fixed length of 24 bits.
**** Depending on practical environments, the allowable number of computers to be connected may be decreased.
97
Using the Bluetooth Device
Using the Bluetooth Device
The optional Integrated Bluetooth (V. 3.0) module is a wireless device installed in selected Fujitsu mobile
computers.
What is Bluetooth
Bluetooth technology is designed as a short-range wireless link between mobile devices, such as laptop
computers, phones, printers, and cameras. Bluetooth technology is used to create Personal Area Networks
(PANs) between devices in short-range of each other.
Where to Find Information About Bluetooth
For additional information about Bluetooth Technology, visit the Bluetooth Web site at:
www.bluetooth.com.
THE WIRELESS LAN/BLUETOOTH ON/OFF SWITCH WILL POWER OFF BOTH THE OPTIONAL WIRELESS
LAN AND BLUETOOTH DEVICES AT THE SAME TIME. TO ENABLE OR DISABLE EITHER ONE OF THE
DEVICES INDIVIDUALLY, PERFORM THE FOLLOWING STEPS:
1Slide the Wireless LAN/Bluetooth on/off switch to On position.
2Right-click on the Bluetooth icon in the Windows notification area on the right side of the
taskbar.
3Select Turn Adapter On (or Off).
4Click [OK].
98
Using the Bluetooth Device
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
The Bluetooth antenna is located on the front edge of the right palm rest and is exempt from minimum
distance criteria due to its low power.
The transmitters in this device must not be co-located or operated in conjunction with any other antenna
or transmitter.
Canadian Notice
To prevent radio interference to the licensed service, this device is intended to be operated indoors and
away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed
outdoors is subject to licensing.
Warranty
Users are not authorized to modify this product. Any modifications invalidate the warranty.
This equipment may not be modified, altered, or changed in any way without signed written permission
from Fujitsu. Unauthorized modification will void the equipment authorization from the FCC and
Industry Canada and the warranty.
99
Appendix B: Fingerprint Sensor Device
Introducing the Fingerprint Sensor Device
Your system has a fingerprint sensor device at the bottom left below the display screen.
Figure 26. Fingerprint sensor
With a fingerprint sensor, you can avoid having to enter a username and password every time you want to:
•Log onto Windows
•Resume from sleep mode
•Cancel a password-protected screen saver
•Log into home pages that require a username and password
Fingerprint Sensor Device
100
- Introducing the Fingerprint Sensor Device
After you have “enrolled” - or registered - your fingerprint, you can simply swipe your fingertip over the
sensor for the system recognize you.
The fingerprint sensor uses Softex OmniPass which provides password management capabilities to
Microsoft Windows operating systems. OmniPass enables you to use a "master password" for all
Windows, applications, and on-line passwords.
OmniPass requires users to authenticate themselves using the fingerprint sensor before granting access to
the Windows desktop. This device results in a secure authentication system for restricting access to your
computer, applications, web sites, and other password-protected resources.
OmniPass presents a convenient graphical user interface, through which you can securely manage
passwords, users, and multiple identities for each user.
Getting Started
This section guides you through the preparation of your system for the OmniPass fingerprint recognition
application. You will be led through the OmniPass installation process. You will also be led through the
procedure of enrolling your first user into OmniPass.
Installing OmniPass
If OmniPass has already been installed on your system, skip this section and go directly to “User
Enrollment” on page 102. You can determine whether OmniPass has already been installed by checking
to see if the following are present:
•The gold key-shaped OmniPass icon in the system tray at the bottom right of the screen.
•The Softex program group in the Programs group of the Start menu
System Requirements
The OmniPass application requires space on your hard drive; it also requires specific Operating Systems
(OS’s). The minimum requirements are as follows:
•Windows XP Professional operating system or later
101
- Introducing the Fingerprint Sensor Device
•At least 35 MB available hard disk space
Installing the OmniPass Application
If OmniPass is already installed on your system, go to “User Enrollment” on page 102. Otherwise
continue with this section on software installation.
To install OmniPass on your system you must:
1Insert the installation media for the OmniPass application into the appropriate drive. If you are installing from
CD-ROM or DVD-ROM, you must find and launch the OmniPass installation program (setup.exe) from the
media.
2Follow the directions provided in the OmniPass installation program. Specify a location to which you would like
OmniPass installed. It is recommended that you NOT install OmniPass in the root directory (e.g. C:\).
3Once OmniPass has completed installation you will be prompted to restart you system. Once your system has
rebooted you will be able to use OmniPass. If you choose not to restart immediately after installation, OmniPass
will not be available for use until the next reboot.
4The installation program automatically places an icon (Softex OmniPass) in the Windows Control Panel as well
as a golden key shaped icon in the taskbar.
Verifying Information about OmniPass
After you have completed installing OmniPass and restarted your system, you may wish to check the
version of OmniPass on your system.
To check the version information of OmniPass:
1From the Windows Desktop, double-click the key-shaped OmniPass icon in the taskbar (usually located in the
lower right corner of the screen),
or,
•INSTALLATION OF THE APPLICATION REQUIRES THAT YOU HAVE AN EXTERNAL OPTICAL DRIVE ATTACHED TO
YOUR SYSTEM.
•FOR INSTALLATION, OMNIPASS REQUIRES THAT THE USER INSTALLING OMNIPASS HAVE ADMINISTRATIVE
PRIVILEGES TO THE SYSTEM. IF YOUR CURRENT USER DOES NOT HAVE ADMINISTRATIVE PRIVILEGES, LOG OUT
AND THEN LOG IN WITH AN ADMINISTRATOR USER BEFORE PROCEEDING WITH OMNIPASS INSTALLATION.
102
- Introducing the Fingerprint Sensor Device
Click the Start button, select Settings, and click Control Panel. Double-click Softex OmniPass in the Control
Panel, and the OmniPass Control Center will appear. If it does not appear, then the program is not properly
installed,
or,
Click the Start button, select Programs, and from the submenu select the Softex program group, from that
submenu click OmniPass Control Center.
2Select the About tab at the top of the OmniPass Control Center. The About tab window appears with version
information about OmniPass.
Uninstalling OmniPass
To remove the OmniPass application from your system:
1Click Start on the Windows taskbar. Select Settings, and then Control Panel.
2Double-click Add/Remove Programs.
3Select OmniPass, and then click Change/Remove.
4Follow the directions to uninstall the OmniPass application.
5Once OmniPass has finished uninstalling, reboot your system when prompted.
User Enrollment
Before you can use any OmniPass features you must first enroll a user into OmniPass.
Master Password Concept
FOR UNINSTALLATION, OMNIPASS REQUIRES THAT THE USER UNINSTALLING OMNIPASS HAVE
ADMINISTRATIVE PRIVILEGES TO THE SYSTEM. IF YOUR CURRENT USER DOES NOT HAVE
ADMINISTRATIVE PRIVILEGES, LOG OUT AND THEN LOG IN WITH AN ADMINISTRATOR USER BEFORE
PROCEEDING WITH OMNIPASS UNINSTALLATION.
103
- Introducing the Fingerprint Sensor Device
Computer resources are often protected with passwords. Whether you are logging into your computer,
accessing your email, e-banking, paying bills online, or accessing network resources, you often have to
supply credentials to gain access. This can result in dozens of sets of credentials that you have to
remember.
During user enrollment a "master password” is created for the enrolled user. This master password
“replaces” all other passwords for sites you register with OmniPass.
Example: A user, John, installs OmniPass on his system (his home computer) and enrolls an OmniPass
user with username “John_01” and password “freq14”. He then goes to his webmail site to log onto his
account. He inputs his webmail credentials as usual (username “John_02” and password “STYLISTIC”),
but instead of clicking [Submit], he directs OmniPass to Remember Password. Now whenever he returns
to that site, OmniPass will prompt him to supply access credentials.
John enters his OmniPass user credentials (“John_01” and “freq14”) in the OmniPass authentication
prompt, and he is allowed into his webmail account. He can do this with as many web sites or password
protected resources he likes, and he will gain access to all those sites with his OmniPass user credentials
(“John_01” and “freq14”). This is assuming he is accessing those sites with the system onto which he
enrolled his OmniPass user. OmniPass does not actually change the credentials of the password protected
resource. If John goes to another computer without he OmniPass account to access his webmail, he would
need to enter his original webmail credentials (“John_02” and “STYLISTIC”) to gain access. If he
attempts his OmniPass user credentials on a system other than a system he’s enrolled on, he will not gain
access.
Basic Enrollment
THE ENROLLMENT PROCEDURE ASSUMES YOU HAVE NO HARDWARE AUTHENTICATION DEVICES OR
ALTERNATE STORAGE LOCATIONS THAT YOU WISH TO INTEGRATE WITH OMNIPASS. IF YOU DESIRE
SUCH FUNCTIONALITY, CONSULT THE APPROPRIATE SECTIONS OF THIS DOCUMENT.
104
- Introducing the Fingerprint Sensor Device
The Enrollment Wizard will guide you through the process of enrolling a user. Unless you specified
otherwise, after OmniPass installation the Enrollment Wizard will launch on Windows login. If you do
not see the Enrollment Wizard, you can bring it up by clicking Start on the Windows taskbar; select
Programs; select Softex; click OmniPass Enrollment Wizard.
1Click Enroll to proceed to username and password verification. By default, the OmniPass Enrollment Wizard
enters the credentials of the currently logged in Windows user.
2Enter the password you use to log in to Windows. This will become the “master password” for this OmniPass
user. In most cases, the Domain: value will be your Windows computer name. In a corporate environment, or
when accessing corporate resources, the Domain: may not be your Windows computer name. Click [Next] to
continue.
3In this step OmniPass captures your fingerprint. Refer to “Enrolling a Fingerprint” on page 104 for additional
information.
4Next, choose how OmniPass notifies you of various events. We recommend you keep Taskbar Tips on
Beginner mode taskbar tips and Audio Tips on at least Prompt with system beeps only until you get
accustomed to how OmniPass operates. Click [Next] to proceed with user enrollment. You will then see a
Congratulations screen indicating your completion of user enrollment.
5Click [Done] to exit the OmniPass Enrollment Wizard. You will be asked if you’d like to log in to OmniPass with
your newly enrolled user; click [Yes].
Enrolling a Fingerprint
Enrolling a fingerprint will increase the security of your system and streamline the authentication
procedure.
You enroll fingerprints in the OmniPass Control Center. With an OmniPass user logged in, double-click
the system tray OmniPass icon. Select the User Settings tab and click Enrollment under the User
Settings area. Click Enroll Authentication Device and authenticate at the authentication prompt to start
device enrollment.
105
- Introducing the Fingerprint Sensor Device
1During initial user enrollment, you will be prompted to select the finger you wish to enroll. Fingers that have
already been enrolled will be marked by a green check. The finger you select to enroll at this time will be marked
by a red arrow. OmniPass will allow you re-enroll a finger. If you choose a finger that has already been enrolled
and continue enrollment, OmniPass will enroll the fingerprint, overwriting the old fingerprint. Select a finger to
enroll and click [Next].
2It is now time for OmniPass to capture your selected fingerprint. It may take a several capture attempts before
OmniPass acquires your fingerprint. Should OmniPass fail to acquire your fingerprint, or if the capture screen
times out, click [Back] to restart the fingerprint enrollment process.
Your system has a “swipe” fingerprint sensor. A swipe sensor is small and resembles a skinny elongated
rectangle. To capture a fingerprint, gently swipe or pull your fingertip over the sensor (starting at the second
knuckle) towards yourself. Swiping too fast or too slow will result in a failed capture. The Choose Finger
screen has a [Practice] button; click it to practice capturing your fingerprint. When you are comfortable with how
your fingerprint is captured, proceed to enroll a finger.
3Once OmniPass has successfully acquired the fingerprint, the Verify Fingerprint screen will automatically
appear. To verify your enrolled fingerprint, place your fingertip on the sensor and hold it there as if you were
having a fingerprint captured. Successful fingerprint verification will show a green fingerprint in the capture
window and the text Verification Successful under the capture window.
106
- Introducing the Fingerprint Sensor Device
Using OmniPass
You are now ready to begin using OmniPass. Used regularly, OmniPass will streamline your
authentications.
Password Replacement
You will often use the password replacement function. When you go to a restricted access website (e.g.,
your bank, your web-based email, online auction or payment sites), you are always prompted to enter your
login credentials. OmniPass can detect these prompts and you can teach OmniPass your login credentials.
The next time you go to that website, you can authenticate with your fingerprint to gain access.
OmniPass Authentication Toolbar
After installing OmniPass and restarting, you will notice a dialog you have not seen before at Windows
Logon. This is the OmniPass Authentication Toolbar, and it is displayed whenever the OmniPass
authentication system is invoked. The OmniPass authentication system may be invoked frequently: during
Windows Logon, during OmniPass Logon, when unlocking your workstation, when resuming from sleep
or hibernate, when unlocking a password-enabled screensaver, during password replacement for
remembered site or application logins, and more. When you see this toolbar, OmniPass is prompting you
to authenticate.
The Logon Authentication window indicates what OmniPass-restricted function you are attempting. The
icons in the lower left (fingerprint and key) show what authentication methods are available to you.
Selected authentication methods are highlighted while unselected methods are not. When you click the
icon for an unselected authentication method, the authentication prompt associated with that method is
displayed.
When prompted to authenticate, you must supply the appropriate credentials: an enrolled finger for the
fingerprint capture window or your master password for the master password prompt (the key icon).
Remembering a Password
OmniPass can remember any application, GUI, or password protected resource with a password prompt.
Using the following procedure, you can store a set of credentials into OmniPass. These credentials will
then be linked to your “master password” or fingerprint.
107
- Introducing the Fingerprint Sensor Device
Go to a site that requires a login (username and password), but do not log in yet. At the site login prompt,
enter your username and password in the prompted fields, but do not enter the site (do not hit [Enter],
[Submit], [OK], or Login). Right-click the OmniPass system tray icon and select Remember Password
from the submenu. The Windows arrow cursor will change to a golden key OmniPass cursor. Click the
OmniPass cursor in the login prompt area, but don’t click [Login] or [Submit].
Associating a Friendly Name
After clicking the OmniPass key cursor near the login prompt, OmniPass will prompt you to enter a
“friendly name” for this site. You should enter something that reminds you of the website, the company,
or the service you are logging into. In its secure database, OmniPass associates this friendly name with
this website.
Additional Settings for Remembering a Site
When OmniPass prompts you to enter a “friendly name” you also have the opportunity to set how
OmniPass authenticates you to this site. There are three effective settings for how OmniPass handles a
remembered site.
The default setting is Automatically click the “OK” or “Submit” button for this password protected
site once the user is authenticated. With this setting, each time you navigate to this site OmniPass will
prompt you for your master password or fingerprint authentication device. Once you have authenticated
with OmniPass, you will automatically be logged into the site.
Less secure is the option to Automatically enter this password protected site when it is activated. Do
not prompt for authentication. Check the upper box to get this setting, and each time you navigate to
this site OmniPass will log you into the site without prompting you to authenticate.
THIS SETTING IS MORE CONVENIENT IN THAT WHENEVER YOU GO TO A SITE REMEMBERED WITH THIS
SETTING, YOU WILL BYPASS ANY AUTHENTICATION PROCEDURE AND GAIN INSTANT ACCESS TO THE
SITE. BUT SHOULD YOU LEAVE YOUR SYSTEM UNATTENDED WITH YOUR OMNIPASS USER LOGGED IN,
ANYONE USING YOUR SYSTEM CAN BROWSE TO YOUR PASSWORD PROTECTED SITES AND GAIN
AUTOMATIC ACCESS.
108
- Introducing the Fingerprint Sensor Device
If you uncheck both boxes in Settings for this Password Site, OmniPass will prompt you for your master
password or fingerprint authentication device. Once you have authenticated with OmniPass your
credentials will be filled in to the site login prompt, but you will have to click the website [OK], [Submit],
or [Login] button to gain access to the site.
Click Finish to complete the remember password procedure. The site location, the credentials to access
the site, and the OmniPass authentication settings for the site are now stored in the OmniPass secure
database. The OmniPass authentication settings (Settings for this Password Site) can always be changed
in Vault Management.
Logging in to a Remembered Site
Whether or not OmniPass prompts you to authenticate when you return to a remembered site is determined
by Settings for this Password Site and can be changed in Vault Management.
The following cases are applicable to using OmniPass to login to: Windows, remembered web sites, and
all other password protected resources.
With Master Password
Once you return to a site you have remembered with OmniPass, you may be presented with a master
password prompt. Enter your master password and you will be allowed into the site.
Logging into Windows with a Fingerprint Device
When logging into Windows with a fingerprint device, the fingerprint capture window will now appear
next to the Windows Login screen. Place your enrolled fingertip on the sensor to authenticate. You will
be simultaneously logged into Windows and OmniPass. The capture window will also appear if you have
used Ctrl-Alt-Del to lock a system, and the fingerprint device can be used to log back in as stated above.
IF A MACHINE IS LOCKED AND OMNIPASS DETECTS A DIFFERENT USER LOGGING BACK IN WITH A
FINGERPRINT, THE FIRST USER WILL BE LOGGED OUT AND THE SECOND USER LOGGED IN.
109
- Introducing the Fingerprint Sensor Device
Password Management
OmniPass provides an interface that lets you manage your passwords. To access this GUI, double-click
the OmniPass key in the system tray. Click Vault Management; you will be prompted to authenticate.
Once you gain access to Vault Management, click Manage Passwords under Vault Settings. You will
see the Manage Passwords interface, with a list of friendly names.
You can view the credentials stored for any remembered website by highlighting the desired resource
under Password Protected Dialog and clicking Unmask Values. Should a password be reset, or an
account expire, you can remove stored credentials from OmniPass. Highlight the desired resource under
Password Protected Dialog and click Delete Page. You will be prompted to confirm the password
deletion.
The two check boxes in Manage Passwords govern whether OmniPass prompts you to authenticate or
directly logs you into the remembered site.
OmniPass will overwrite an old set of credentials for a website if you attempt to use Remember
Password on an already remembered site.
The exception to the above rule is when resetting the Windows password. If your password is reset in
Windows, the next time you login to Windows, OmniPass will detect the password change and prompt
you to “Update” or “Reconfirm” the password with OmniPass. Enter your new Windows password in the
prompt and click OK. Your OmniPass "master password" will still be your Windows password.
OmniPass User Identities
Identities allow OmniPass users to have multiple accounts to the same site (e.g., bob@biblomail.com and
boballen@biblomail.com). If OmniPass did not provide you identities, you would be limited to
remembering one account per site.
To create and manage identities, double-click the OmniPass key in the system tray. Click Vault
Management; OmniPass will prompt you to authenticate. Once you gain access to Vault Management,
click Manage Identities under Vault Settings. You can only manage the identities of the currently logged
in OmniPass user
110
- Introducing the Fingerprint Sensor Device
To add a new identity, click New Identity or double-click Click here to add a new identity. Name the
new identity and click [OK], then click [Apply]. You can now switch to the new identity and start
remembering passwords.
To delete an identity, highlight the identity you want to delete and click [Delete Identity], then [Apply].
To set the default identity, highlight the identity you want as default and click [Set as Default]; click
[Apply] to ensure the settings are saved. If you log in to OmniPass with a fingerprint device, you will
automatically be logged in to the default identity for that OmniPass user. You can choose the identity with
which you are logging in if you login using "master password".
Choosing User Identity during Login
To choose your identity during login, type your username in the User Name: field. Press [Tab] and see
that the Domain: field self-populates. Click the Password: field to bring the cursor to it, and you will see
the pull-down menu in the Identity: field. Select the identity to login as, then click OK.
Switch User Identity
To switch identities at any time, right-click the OmniPass system tray icon and click Switch User Identity
from the submenu. The Switch Identity dialog will appear. Select the desired identity and then click OK.
Identities and Password Management
On the Manage Passwords interface of the Vault Management tab of the OmniPass Control Center,
there is a pull-down selection box labeled, Identity. This field lets you choose which identity you are
managing passwords for. When you select an identity here, only those password protected dialogs that are
associated with that identity are shown. You can perform all the functions explained in “Password
Management” on page 109.
WHEN YOU DELETE AN IDENTITY, ALL OF ITS ASSOCIATED REMEMBERED SITES AND PASSWORD
PROTECTED DIALOGS ARE LOST.
111
- Introducing the Fingerprint Sensor Device
Configuring OmniPass
This section gives an overview of both the Export/Import function and the OmniPass Control Center.
Exporting and Importing Users
Using OmniPass Control Center, you can export and import users in and out of OmniPass. The export
process backs up all remembered sites, credentials, and enrolled fingerprints for an OmniPass user. All
OmniPass data for a user is backed up to a single encrypted database file. During the import process, the
Windows login of the exported user is required. If the proper credentials cannot be supplied, the user
profile will not be imported.
Exporting an OmniPass User Profile
To export a user, open the OmniPass Control Center, and click Import/Export User under Manage
Users.
Click Exports an OmniPass user profile. OmniPass will prompt you to authenticate. Upon successfully
authentication, you must name the OmniPass user profile and decide where to save it. An .opi file is
generated, and you should store a copy of it in a safe place.
YOU CANNOT IMPORT A USER INTO OMNIPASS IF THERE ALREADY IS A USER WITH THE SAME NAME
ENROLLED IN OMNIPASS.
•YOU SHOULD PERIODICALLY EXPORT YOUR USER PROFILE AND STORE IT IN A SAFE PLACE. IF
ANYTHING HAPPENS TO YOUR SYSTEM, YOU CAN IMPORT YOUR OMNIPASS PROFILE TO A NEW
SYSTEM AND HAVE ALL YOUR REMEMBERED SETTINGS AND FINGERPRINTS INSTANTLY.
•YOU DON'T FORGET THE WINDOWS LOGIN CREDENTIALS WHEN EXPORTING. WHEN YOU EXAMINE
THE IMPORTATION, YOU ARE PROMPTED FOR AUTHENTICATION. THE CREDENTIALS THAT WILL
ALLOW A USER PROFILE TO BE IMPORTED ARE THE WINDOWS LOGIN CREDENTIALS OF THE
EXPORTED USER. THEY ARE THE CREDENTIALS THAT HAD TO BE SUBMITTED WHEN THE USER
PROFILE WAS EXPORTED. YOU WILL NEED USER NAME, PASSWORD, AND DOMAIN.
112
- Introducing the Fingerprint Sensor Device
This .opi file contains all your user specific OmniPass data, and it is both encrypted and password
protected. This user profile does NOT contain any of your encrypted data files.
Importing an OmniPass User Profile
To import an OmniPass user open the OmniPass Control Center, and click Import/Export User under
Manage Users. Click Imports a new user into OmniPass and then select OmniPass Import/Export File
(*.opi) and click Next. OmniPass will then prompt you to browse for the file you had previously exported
(.opi file). When you select the .opi file for importation, OmniPass will prompt you for authentication.
The credentials that will allow a user profile to be imported are the Windows login credentials of the
exported user. They are the credentials that had to be submitted when the user profile was exported. You
will need User Name, Password, and Domain. If you don’t remember the value for Domain, in a PC or
SOHO environment Domain should be your computer name.
OmniPass will notify you if the user was successfully imported.
Things to Know Regarding Import/Export
•Assume you export a local Windows User profile from OmniPass. You want to import that profile
to another machine that has OmniPass. Before you can import the profile, a Windows user with the
same login credentials must be created on the machine importing the profile.
Example: I have a Windows user with the username “Tom” and the password “Sunshine” on my
system. I have enrolled Tom into OmniPass and remembered passwords. I want to take all my
passwords to new system. I export Tom’s OmniPass user profile. I go to my new system and using
the Control Panel I create a user with the username "Tom" and the password "Sunshine". I can now
successfully import the OmniPass user data to the new system.
•If you export an OmniPass-only user, you can import that user to any computer running OmniPass,
provided that a user with that name is not already enrolled in OmniPass.
•If you attempt to import a user profile who has the same name as a user already enrolled in
OmniPass, the OmniPass import function will fail.
113
- Introducing the Fingerprint Sensor Device
OmniPass Control Center
This section serves to explain functions within OmniPass Control Center that weren’t explained earlier.
You can access the OmniPass Control Center any of three ways:
•Double-click the golden OmniPass key shaped icon in the Windows taskbar (typically in the lower-
right corner of the desktop)
•Click the Start button; select the Programs group; select the Softex program group; and click the
OmniPass Control Center selection.
•Open the Windows Control Panel (accessible via Start button --> Settings --> Control Panel) and
double-click the Softex OmniPass icon.
User Management
The User Management tab has two major interfaces: Add/Remove User and Import/Export User.
Import/Export User functionality is documented in “Exporting and Importing Users” on page 111.
Add/Remove User functionality is straightforward.
If you click Adds a new user to OmniPass you will start the OmniPass Enrollment Wizard. The
Enrollment Wizard is documented in “User Enrollment” on page 102.
If you click Removes a user from OmniPass, OmniPass will prompt you to authenticate. Authenticate
with the credentials (or enrolled fingerprint) of the user you wish to remove. OmniPass will prompt you
to confirm user removal. Click OK to complete user removal.
REMOVING A USER WILL AUTOMATICALLY DESTROY ALL OMNIPASS DATA ASSOCIATED WITH THAT
USER. ALL IDENTITIES AND CREDENTIALS ASSOCIATED WITH THE USER WILL BE LOST.
IF YOU’RE SURE YOU WANT TO REMOVE THE USER, WE RECOMMEND YOU EXPORT THE USER PROFILE.
114
- Introducing the Fingerprint Sensor Device
User Settings
User Settings tab has three interfaces: Audio Settings, Taskbar Tips, and Enrollment. User settings
allow you to customize OmniPass to suit your preferences. Under User Settings (Audio Settings and
Taskbar Tips) you can set how OmniPass notifies you of OmniPass events (e.g., successful login, access
denied, etc.). Details of each setting under the Audio Settings and Taskbar Tips interfaces are self-
explanatory.
The Enrollment interface allows you to enroll fingerprints. For the procedure to enroll and authentication
device refer to Chapter 2.3. To enroll additional fingerprints, click Enroll Authentication Device, and
authenticate with OmniPass. Select the fingerprint recognition device in the Select Authentication
Device screen (it should already be marked by a green check if you have a finger enrolled) and click Next.
System Settings
The OmniPass Startup Options interface can be found in the System Settings tab. With these options you
can specify how your OmniPass Logon is tied to your Windows Logon.
The first option, Automatically log on to OmniPass as the current user, will do just as it says; during
Windows login, you will be logged on to OmniPass using your Windows login credentials. If the user
logging into Windows was never enrolled into OmniPass, upon login no one will be logged on to
OmniPass. This setting is appropriate for an office setting or any setting where users must enter a
username and password to log into a computer. This is the default setting.
With the second option, Manually log on to OmniPass at startup, OmniPass will prompt you to login
once you have logged on to Windows.
With the third option, Do not log on to OmniPass at startup, OmniPass will not prompt for a user to be
logged on.
You can manually log on to OmniPass by right-clicking the OmniPass taskbar icon and clicking Log in
User from the right-click menu.
115
- Introducing the Fingerprint Sensor Device
Troubleshooting
You cannot use OmniPass to create Windows users. You must first create the Windows user, and you will
need administrative privileges to do that. Once the Windows user is created, you can add that user to
OmniPass using the same username and password
Cannot add Windows users to OmniPass
If you experience difficulties adding a Windows user to OmniPass, you may need to adjust your local
security settings. You can do this by going to Start, Control Panel, Administrative Tools, and Local
Security Settings. Expand Local Policies, expand Security Options, and double-click Network Access:
Sharing and Security Model for Local Accounts. The correct setting should be Classic - Local Users
Authenticate as Themselves.
Cannot add a User with a Blank Password to OmniPass
If you experience difficulties adding a user with a blank password to OmniPass, you may need to adjust
your local security settings. First attempt the procedure explained in the Cannot add Windows user to
OmniPass section. If the difficulties persist, then try the following procedure.
Click Start, Control Panel, Administrative Tools, and Local Security Settings. Expand Local Policies,
expand Security Options, and double-click Accounts: Limit local account use of blank passwords to
console login only. This setting should be set to Disabled.
Dialog appears after OmniPass authentication during Windows Logon
After installing OmniPass on your system, you can choose to logon to Windows using OmniPass. You
authenticate with OmniPass (via master password, or an enrolled security device) and OmniPass logs you
into Windows. You may, during this OmniPass authentication, see a Login Error dialog box.
This dialog box occurs when OmniPass was unable to log you into Windows with the credentials supplied
(username and password). This could happen for any of the following reasons:
•Your Windows password has changed
•Your Windows account has been disabled
116
- Introducing the Fingerprint Sensor Device
If you are having difficulties due to the first reason, you will need to update OmniPass with your changed
Windows account password. Click Update Password and you will be prompted with a dialog to
reconfirm your password.
Enter the new password to your Windows user account and click OK. If the error persists, then it is
unlikely the problem is due to your Windows user account password changing.
117
Appendix C: FujitsuHL User Guide
FujitsuHL Instructions
FujitsuHL provides an icon-based display of the Home, Photo, and Documents Launchers that help you
easily choose them by tapping the icon on the screen.
FujitsuHL assists you in performing the following functions:
•Execute FujitsuHL gadgets
•Link to software that you often use
•Open files in the Pictures and Documents folders
•Take pictures using the Web Camera
Starting FujitsuHL
You can execute FujitsuHL by two methods:
•Pressing the [Keyboard] button on the PC for two seconds and more, or,
•Tapping Start > All Programs > FujitsuHL, then selecting FujitsuHL.
TO USE FUJITSUHL, YOU SHOULD SET THE DISPLAY RESOLUTION TO 1280 X 800 DOTS.
118
FujitsuHL Instructions
Closing FujitsuHL
To close FujitsuHL, tap the at the right top of the screen.
About FujitsuHL
FujitsuHL has three different Launcher screens, each of which will be described in detail later in this
chapter:
Home Launcher
The Home Launcher allows you to select and execute Gadgets and software.
Photo LauncherPhoto Launcher allows you to view your photos contained in the Pictures folder.
Documents Launcher
The Documents Launcher allows you to view the files in the Documents folder.
Additional features
Using FujitsuHL, you can also use the Camera feature to take pictures using your web camera, and the
Photo Viewer feature to view your photos.
119
FujitsuHL Instructions
Home Launcher
Tab Area
By tapping one of the tabs, you can switch the Launcher screen to Home, Photo or Documents.
Handle Bar
By tapping the Handle Bar, you can switch between the Launcher Screen and the Gadget screen
Tab Area Status Area
Quick
Launcher
Handle Bar
120
FujitsuHL Instructions
Status Area
Use the icons in the Status Area to (in order from left to right):
Quick Launcher
By tapping an icon in this area, you can:
Change the display brightness
Show the WLAN antenna level (when you tap it, WLAN Management is opened)
Change the sound volume and set mute
Show the battery level
Open the Task Manager
Close FujitsuHL
Launch the web camera
121
FujitsuHL Instructions
Gadget Screen
With the Gadget screen, you can use the FujitsuHL Gadgets to initiate commonly-used tasks.
Add software to links in the Quick Launcher for commonly used applications
Handle
Bar
Gadget Area Gadget Icons
122
FujitsuHL Instructions
Handle Bar
By tapping the Handle Bar, you can switch between “Gadget Screen” and “Launcher Screen”.
Gadget Area
This area shows which gadget is currently being executed.
Gadget Icons
The following Gadgets are available in the Gadget Icon area. By tapping the icon, you automatically
execute the program or utility.
* To launch these features, Microsoft Outlook must be set up.
Launch the Outlook Mail Gadget*
Launch the Outlook Schedule Gadget*
Launch the Outlook ToDo Gadget*
Launch the Worldwide Clock Gadget
123
FujitsuHL Instructions
Launcher Screen
With the Launcher Screen, you can execute selected applications.
Shortcut Area
The shortcut area displays icons for each of the linked applications. To execute an application, simply tap
on the icon.
To add a new icon to the shortcut area, add it to the Quick Launcher (See “Quick Launcher” on page 120),
then drag the icon to the shortcut area.
To delete a shortcut, press it until prompted to remove, then tap [OK].
Note that the Mailer and Browser icons cannot be deleted.
Shortcut
Area
124
FujitsuHL Instructions
Photo Launcher
When “Photo” is selected in the tab area at the top of the screen, the Photo Launcher screen appears.
Photo Area
This area shows thumbnail images of the photos that are in the Pictures folder.
By tapping an image, you can open it through the Photo Viewer. See “Photo Viewer Button” on page 127
The following formats are supported by this utility: JPG, BMP, PNG and GIF.
Photo Area
125
FujitsuHL Instructions
Documents Launcher
When “Documents” is selected in the tab area at the top of the screen, the Documents Launcher screen
appears.
Documents Area
This area shows icon representations of the files in the Document folder.
By tapping an icon, you can open the file.
Documents Area
126
FujitsuHL Instructions
Camera Tool
The Camera tool allows you to take and view pictures and modify the settings of the camera(s).
Preview Area
This area shows the preview of the scene being viewed by the Web Camera.
Preview Area
Home Button
Photo Viewer Button Shutter Button
Camera Switch Button Setting Button
127
FujitsuHL Instructions
Home Button
By tapping this button, you can return to the most recently used Launcher screen.
Photo Viewer Button
By tapping this button, you execute the Photo Viewer to look at your pictures.
If some photos have already been saved, this button icon will be changed to the latest photo image.
Shutter Button
By tapping this button, you can take a picture. The pictures will be saved in the Camera folder under
Pictures. The filename contains the date on which the picture was taken.
Camera Switch Button
By tapping this button, you can switch between the rear-facing Web Camera and the front-facing Web
Camera.
Setting Button
By tapping this button, you can change the brightness, contrast, and color tone of the Web Camera.
128
FujitsuHL Instructions
Photo Viewer
You can open the Photo Viewer by either tapping a thumbnail image of a photo in the Photo Launcher or
by tapping the Photo Viewer button in Camera.
Display Area
Home
Button
Camera Button
Set Wallpaper
Button Previous
Button
Next Button
Rotate
Clockwise
Rotate Counter-clockwise
Trash Can
Button
129
FujitsuHL Instructions
Display Area
This area shows the photo or graphics data that you selected..
Home Button
By tapping this button, you return to the most recently used Launcher screen.
Camera Button
By tapping this button, you open the Camera utility. See “Camera Tool” on page 126
Set Wallpaper Button
By tapping this button, you can change the photo that is currently displayed as the FujitsuHL wallpaper.
If you want to change to the previous wallpaper, choose it from the Photo launcher and then tap this button.
Previous Button
By tapping this button, you can see previous photo. You can also do this by flicking backwards on the
display.
Next Button
By tapping this button, you can see the next photo. You can also do this by flicking forwards on the display.
Rotate Buttons
By tapping this button, you can rotate the photo data currently displayed in the Display Area to 90 degrees
clockwise or counter-clockwise.
Trash Can
By tapping this button, you can delete the photo that is currently displayed in the Display Area.
117
Index
A
About This Guide 11
AC adapter 35
plug adapters 73
Active Digitizer 21
application buttons 15
Ctl-Alt-Del button 34
function button 34
orientation button 34
Auto/Airline Adapter 35, 36
Automatically Downloading Driver Updates 69
B
Battery 47
care 73
cold-swapping 50
conserving power 43
dead 61
faulty 61
hot-swapping 51
increasing life 74
Lithium Polymer battery 47
low 49
problems 61
recharging 48
replacing 50
shorted 49
Standby mode 49
battery release latch 16
BIOS
guide 40
setup utility 39
Bluetooth
Where to Find Information 97
Boot Sequence 38
Booting the System 40
Built-in Speakers 58
C
Click Me! 42
Clicking 21
Configuration Label 76
Contact Information 12
conventions used in the guide 11
D
DC input connector 15
DC Output Cable 35
DC Power Jack 35
Display Panel 20
problems 62, 63
Drivers and Application CD 65
E
Error Messages 64
118
F
Fingerprint Sensor Device17, 99
enrolling a fingerprint 104
getting started 100
installing OmniPass 100
logging into a remembered site 108
OmniPass authentication toolbar 106
password replacement 106
remembering a password 106
uninstalling OmniPass 102
user enrollment 102
using OmniPass 106
Front Web Camera 14
Fujitsu Contact Information 12
Fujitsu Shopping Online 12
G
Gestures
Four-Finger Functions 28
One-Finger Functions 25
Three-Finger Functions 27
Two-Finger Functions 26
H
Hard Disk Drive
problems 58
Hard Disk Drive Passwords 39
HDMI Port 17
headphone 17
Hibernation Feature 45
disable/enable 45
L
Lithium Polymer Battery 17
M
Media Player
care 75
Microsoft Office Starter 2010 82
Mouse
problems 58
O
Operating 82
P
Pen Caring for the Pen 30
Changing the Pen Battery 31
Changing the Pen Settings 30
Installing a Pen Tether 32
Replacing the Pen Tip 32
pen not responding 59
Pen Tether Attachment Point 15
Power
AC adapter 35
Auto/Airline adapter 35
failure 60
management 43
off 46
on 37
problems 62
sources 35
power icon 19
Power Management 43
Power On Self Test 38, 64
Power/Suspend/Resume Switch 17, 43
Pre-Installed Software 80
119
R
Rear Web Camera 16
Registration 42
Regulatory Information 83
removable battery pack 17
Restarting 45
Restoring Your Pre-installed Software 65
S
SD Card
installing 53
removing 54
SD Card Slot 17
Secure Digital Card 53
removing 54
Sleep Mode 43
Smart Card Slot
17
Specifications 76
Audio 78
Chipset 77
Digitizer 77
Dimensions and Weight 79
Environmental Requirements 80
Keyboard 79
mass storage device options 78
Memory 77
Microprocessor 77
Power 79
Video 77
status display 18
power icon, system states indicated by 19
system status LEDs 14
T
Touch Screen
calibrating 24
clicking 22
dragging 23
Troubleshooting 55
Audio Problems 58
battery 61
display 62
hard drive 58
mouse 58
power 60
USB 59
U
Universal Serial Bus 17
Using the Optional Capacitive Touchscreen 24
W
Warranty 12
Windows 11
Windows Power Management 45
Wireless Device On/Off switch 15
Wireless LAN
Before Using the Wireless LAN 87
configuring 87
connection to the network 92
deactivating/disconnecting 90
modes 88
Specifications 95
Troubleshooting 93