Sierra Wireless MC8355 MC8355 WWAN IN FUJITSU T732/TH702 STYLISTIC PC User Manual

Sierra Wireless Inc. MC8355 WWAN IN FUJITSU T732/TH702 STYLISTIC PC Users Manual

Users Manual

SystemOperating manualLIFEBOOK T732
Congratulations on your purchase of an innovativeproduct from Fujitsu.The latest information about our products, tips, updates etc. can be foundon the Internet at: "http://www.fujitsu.com/fts/"For automatic driver updates, go to: "http://support.ts.fujitsu.com/download"Should you have any technical questions, please contact:• our Hotline/Service Desk (see the Service Desk list or visit:"http://support.ts.fujitsu.com/contact/servicedesk")• Your sales partner• Your sales officeWe hope you enjoy working with your new Fujitsu system!
Published byFujitsu Technology SolutionsMies-van-der-Rohe-Straße 8 (Mies-van-der-Rohe Street No. 8)80807 Munich, GermanyContacthttp://www.fujitsu.com/fts/Copyright© Fujitsu Technology Solutions 2012. All rights reserved.Publication Date10/12Order No.: A26391-K368-Z320-1-7619, edition 1
LIFEBOOK T732Operating manualInnovative technology 7Ports and controls 9Important notes 12First-time setup of your device 15Working with the notebook 18Security functions 68Connecting external devices 75Removing and installing componentsduring servicing 82Settings in BIOS Setup Utility 90Troubleshooting and tips 92Technical data 99Manufacturer’s notes 102Index 108
RemarksInformation on the product description meets the design specifications of Fujitsu andis provided for comparison purposes. Several factors may cause the actual results todiffer. Technical data is subject to change without prior notification. Fujitsu rejects anyresponsibility with regard to technical or editorial mistakes or omissions.TrademarksFujitsu and the Fujitsu logo are registered trademarks of Fujitsu Limited or itssubsidiaries in the United States and other countries.Microsoft and Windows are trademarks or registered trademarks of the MicrosoftCorporation in the United States and/or other countries.Made under license from DTS Licensing Limited. DTS and the symbol are registered trademarks and& DTS Boost is a trademark of DTS, Inc. Product contains software. © DTS, Inc. All rights reserved.All other trademarks specified here are the property of their respective owners.CopyrightNo part of this publication may be copied, reproduced or translated withoutthe prior written consent of Fujitsu.No part of this publication may be saved or transferred by any electronic meanswithout the written approval of Fujitsu.
ContentsContentsInnovativetechnology ................................................................. 7Furtherinformation ...................................................................... 7Notational conventions .................................................................. 8Portsandcontrols ..................................................................... 9Importantnotes ........................................................................ 12Safetynotes ............................................................................ 12Additional safety notes for devices with radio components . . . . . ............................. 12Energysaving .......................................................................... 13Energy saving under Windows ....................................................... 13Travellingwithyournotebook ............................................................ 13Beforeyoutravel ................................................................... 13Notebook:transporting ............................................................... 14Cleaningthenotebook .................................................................. 14First-time setup ofyourdevice ......................................................... 15Unpacking and checkingthedevice ...................................................... 15Selectingalocation ..................................................................... 16Mains adapter connecting ............................................................... 16Switchingonthedevice for the firsttime .................................................. 17Workingwiththenotebook ............................................................ 18Statusindicators ........................................................................ 18Openingthenotebook ................................................................... 20Switching on the notebook . . . . ........................................................... 21ProgrammingtheON/OFFswitch ..................................................... 21Different ways to use your notebook . . . ................................................... 22From notebook to Tablet PC . . ....................................................... 22Selectdisplayorientation(portraitorlandscapeorientation) ............................. 24FromTabletPCtonotebook .......................................................... 25Switching off the notebook . . . . ........................................................... 26Closing the notebook . . .................................................................. 27Handwriting recognition under Windows 7 . . . . . ............................................ 27LCDscreen ............................................................................ 28AmbientLightSensor ................................................................ 28UsingadeviceasatabletPC ............................................................ 28Using fingers ....................................................................... 29Usingthestyluspen ................................................................. 32Usingthedeviceasanotebook .......................................................... 35Touchpadandtouchpadbuttons ...................................................... 35Keyboard ............................................................................... 37Virtualnumerickeypad .............................................................. 39Country and keyboard settings ....................................................... 39Keycombinations ................................................................... 40Tabletbuttons .......................................................................... 42Programmingthetabletbuttons ...................................................... 43Webcam ............................................................................... 44Rechargeablebattery ................................................................... 45Charging,caringforandmaintainingthebattery ....................................... 45Removingandinstallingthebattery ................................................... 46Batterychargestatusindicator ....................................................... 48Fujitsu 3
ContentsModule ................................................................................. 49Removing a module . ................................................................ 49Installing a module . . ................................................................ 50Opticaldrive ............................................................................ 50Handling data carriers . . . ............................................................ 50CD/DVDindicator ................................................................... 51Insertingorremovingadatacarrier ................................................... 51Manual removal (emergency removal) . . . ............................................. 52Removing and fittingthedustremovalcover(ventilationslotcover) ......................... 52Using the power-management features . . ................................................. 54Memorycards .......................................................................... 55Supportedformat .................................................................... 55Insertingthememorycard ........................................................... 55Removingthememorycard .......................................................... 56ExpressCards .......................................................................... 56Insertingthecard ................................................................... 57Removingthecard .................................................................. 58Loudspeakers and microphones . . ........................................................ 58SIMcard ............................................................................... 59InsertingtheSIMcard ............................................................... 59RemovingtheSIMcard .............................................................. 59Optional Wireless LAN / Bluetooth / UMTS / LTE wireless components . . . ................... 60Switching the wireless components on and off ......................................... 60SettingupWLANaccess ............................................................ 61AccessviaUMTS/LTE .............................................................. 61UMTS/LTEantenna ................................................................. 61EthernetandLAN ....................................................................... 62Your Port Replicator (optional) . . . ........................................................ 62PortsonthePortReplicator .......................................................... 63Settinguptheportreplicator ......................................................... 64Connect the notebook to the port replicator . . . ......................................... 64Switching on the notebook via the port replicator . . . . . .................................. 66SwitchingoffnotebookviaPortReplicator ............................................. 66Disconnecting the notebook from the port replicator . . .................................. 67Securityfunctions ..................................................................... 68Briefoverviewofsecurityfunctions ....................................................... 68Configuring the fingerprint sensor ........................................................ 69UsingtheSecurityLock ................................................................. 69ConfiguringpasswordprotectioninBIOSSetupUtility ...................................... 70Protecting BIOS Setup Utility (supervisor and user password) . .......................... 70Password protection for booting of the operating system . .............................. 71Passwordprotectionfortheharddisk ................................................. 72Usingthesecurityfunctionofthetabletkeys .............................................. 73Setting the Supervisor password . . . . ................................................. 73SettingtheUserpassword ........................................................... 73Enteringpasswordsusingthetabletbuttons ........................................... 73Trusted Platform Module (TPM) (device-dependent) . . . . . .................................. 74EnablingTPM ....................................................................... 74DisablingTPM ...................................................................... 74Connectingexternaldevices ........................................................... 75Connecting an external monitor . . ........................................................ 76Connecting an external monitor to the DisplayPort . . . .................................. 774Fujitsu
ContentsHDMIport .......................................................................... 78Connecting USB devices . . . . . ........................................................... 79USBportwithchargingfunction(AnytimeUSBcharge) ................................. 80HowtoremoveUSBdevicescorrectly ................................................ 80Connecting external audio devices ....................................................... 81Microphone port/Line In . . . ........................................................... 81Headphone port . . . .................................................................. 81Removing and installing components during servicing . . . . ............................. 82Notesoninstallingandremovingboardsandcomponents .................................. 82Preparing to remove components . ....................................................... 83Installing and removing memory expansion . . . . ............................................ 83Removingacover ................................................................... 84Removingmemorymodules .......................................................... 84Installingamemorymodule .......................................................... 85Attachingthecover .................................................................. 85Removingandinstallingtheharddisk .................................................... 86Removingacover ................................................................... 86Removingaharddisk ............................................................... 87Installingaharddisk ................................................................. 88Attachingthecover .................................................................. 89Finishing component removal . ........................................................... 89Settings in BIOS Setup Utility . . . ....................................................... 90StartingtheBIOSSetupUtility ........................................................... 90OperatingBIOSSetupUtility ............................................................. 90ExitingBIOSSetupUtility ................................................................ 91Exit Saving Changes - save changes and exit BIOS Setup Utility . . ..................... 91Exit Discarding Changes – Discard changes and exit BIOS Setup Utility . . . .............. 91Load Setup Defaults – Copy Standard Entries . ........................................ 91Discard Changes – Discard changes without exiting the BIOS Setup Utility . .............. 91Save Changes - save changes without exiting the BIOS Setup Utility . . . . . . .............. 91Save Changes and Power Off ....................................................... 91Troubleshootingandtips .............................................................. 92Helpifproblemsoccur ................................................................... 92The notebook’s date or time is incorrect ................................................... 93Battery indicator does not illuminate . . . ................................................... 93Whencertaincharactersareenteredonthekeyboard,onlynumeralsarewritten ............. 93The notebook’s LCD screen remains blank . . . . ............................................ 93The LCD screen is difficulttoread ........................................................ 94Theexternalmonitorremainsblank ...................................................... 94Theexternalmonitorisblankortheimageisunstable ..................................... 94The cursor does not correctly follow the pen movements . . . . . . ............................. 95Peninputnotworking ................................................................... 95The notebook cannot be started . . . ....................................................... 95The notebook stops working . . ........................................................... 96The printer does not print . . . . . ........................................................... 96The radio connection to a network does not work . . ........................................ 96Thebatterydischargestooquickly ........................................................ 97Acousticwarnings ....................................................................... 97Errormessagesonthescreen ........................................................... 97Technicaldata ......................................................................... 99Fujitsu 5
ContentsNotebook . . . . ........................................................................... 99PortReplicator(optional) ................................................................ 100Rechargeable battery . . . ................................................................ 101Mains adapter for use with the notebook and port replicator . . .............................. 101Manufacturer’snotes .................................................................. 102Disposalandrecycling .................................................................. 102DeclarationsofConformity ............................................................... 102CEmarking ............................................................................ 102Regulatorynotices ...................................................................... 102Regulatory information for notebooks without radio device .............................. 103DOC (Industry CANADA) notices . . . . ................................................. 104FCC regulatory information for notebooks with radio device . . . .......................... 106Index .................................................................................. 1086Fujitsu
Innovative technologyInnovative technology... and ergonomic design make your device a reliable and convenient companion.The device boots very quickly, is ready for immediate use and offers a particularlylong operating time because of its high capacity battery.With the user-friendly "BIOS Setup Utility" you can control your notebook’s hardware and betterprotect your system against unauthorised access by using the powerful password properties.Information on the connections and user components of your notebookcanbefoundin"Ports and controls", Page 9.Further informationThe Windows drivers for your device can be found on our Internet site.The factory installation of your device does not support any other operatingsystem. Fujitsu Technology Solutions accepts no liability whatsoeverif any other operating system is used.Software oriented components of these instructions refer to Microsoft products,if they come within the scope of the delivery.If you install other software products, pay attention to the operatinginstructions of the manufacturer.Fujitsu 7
Innovative technologyNotational conventionsPay particular attention to text marked with this symbol. Failure to observethese warnings could pose a risk to health, damage the device or leadto loss of data. The warranty will be invalidated if the device becomesdefective through failure to observe these warnings.Indicates important information for the proper use of the device.►Indicates an activity that must be performedIndicates a resultThis font indicates data entered using the keyboard in a program dialogue or atthe command line, e.g. your password (Name123) or a command used tostart a program (start.exe)This font indicates information that is displayed on the screen by a program, e.g.:Installation is complete.This font indicates• terms and texts used in a software interface, e.g.: Click on Save• names of programs or files, e.g. Windows or setup.exe."This font" indicates• cross-references to another section, e.g. "Safety information"• cross-references to an external source, e.g. a web address: For moreinformation, go to "http://www.fujitsu.com/fts/"• Names of CDs, DVDs and titles or designations for other materials,e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manualKey indicates a key on the keyboard, e.g: F10This font indicates terms and texts that are emphasised or highlighted, e.g.: Donot switch off the device8Fujitsu
Ports and controlsPorts and controlsThis chapter presents the individual hardware components of your device. It gives youan overview of the device’s indicators and connections. Please familiarise yourself withthese components before you start to work with the device.Notebook open1 2386141312 114614957515161017181 = LCD screen2 = WebCam (* optional)3 = WebCam LED4 = Fingerprint sensor5 = Microphone6 = Status indicators7 = Windows button8 = Tablet buttons9 = ON/OFF switch10 = Ambient light sensor11 = Keyboard12 = Touchpad13 = Touchpad buttons14 = Loudspeakers15 = Microphone jack16 = Headphone port17 = Memory card slot18 = ON/OFF switch for wireless componentsFujitsu 9
Ports and controlsLeft panel1 2 31 = DC input connector (DC IN)2 = HDMI port3 = USB port with charging function (AnytimeUSB charge, USB 3.0)Rear3 4211 = Security Lock device2 = VGA monitor port3 = USB ports (USB 2.0)4 = LAN port10 Fujitsu
Ports and controlsRight-hand side1 4321=Penslot2 = ExpressCard slot3 = Module bay with optical drive4 = Eject lever for module bayBottom14627531 = Hard disk service compartment2 = Memory service compartment3 = Attachment eye for the pen cord4 = Battery with SIM card slot under the battery5 = Battery charge status indicator6 = Port for port replicator7 = Ventilation slot coverFujitsu 11
Important notesImportant notesImportantnotesNotesThis chapter contains essential safety information which must be followedwhen working with your notebook. Other notes also provide useful informationwhich will help you with your notebook.Safety notesSafetynotesNotesPlease follow the safety notes provided in the "Safety/Regulations" manualas well as the safety notes given below.Please pay special attention to the sections in the manual markedwith the symbol on the left.When connecting and disconnecting cables, observe the relevantnotes in this operating manual.Read the information on the ambient conditions in the "Technical data",Page 99 and "First-time setup of your device", Page 15 before preparing yournotebook for use and switching it on for the first time.When cleaning the device, please observe the relevant notes in thesection "Cleaning the notebook", Page 14.Pay attention to the additional safety notes for devices with radio componentsprovided in the "Safety/Regulations" manual.Please refer to the notes in the chapter "Removing and installingcomponents during servicing", Page 82.This notebook complies with the relevant safety regulations for data processingequipment. If you have questions about using your notebook in a particular area,please contact your sales outlet or our Hotline/Service Desk.Additional safety notes for devices withradio componentsRadiocomponent :WirelessLAN:Bluetooth,safetynotesIf a radio component (Wireless LAN, Bluetooth, UMTS/LTE) is incorporated in your notebook,you must be sure to observe the following safety notes when using your notebook:• Switch off the radio components when you are in an aircraft or driving in a car.• Switch off the radio components when you are in a hospital, an operating room or near a medicalelectronics system. The transmitted radio waves can impair the operation of medical devices.• Switch off the radio components when you let the device get near flammablegases or into hazardous environments (e.g. petrol station, paintshops), as thetransmitted radio waves can cause an explosion or a fire.For information on how to switch radio components on and off, see chapter"Switching the wireless components on and off", Page 60.12 Fujitsu
Important notesEnergy savingNotesEnergyEnergysavingSwitch the notebook off when it is not in use. Switch off external, connected devices if youare not using them. If you use the energy saving functions, the notebook uses less energy.You will then be able to work for longer before having to recharge the battery.Energy efficiency is increased and the environmental impact is reduced.You save money while protecting the environment.Energy saving under Windows►Make use of the power management features (see ""Using the power-management features",Page 54").Travelling with your notebookMobileoperationNotesTrans porta tionNotebookPlease observe the points listed below when travelling with your notebook.Before you travel►Back up important data stored on your hard disk.NotebookTravel,notebook►Switch off the radio component for data security reasons. With data traffic via a wirelessconnection, it is also possible for unauthorised third parties to receive data.Information on activating data encryption is provided in the documentationfor your radio component.►If you wish to use your notebook during a flight, first check with the flightattendants if it is OK to do so.When travelling in other countries►If you are travelling abroad, check that the mains adapter can be operated with thelocal mains voltage. If this is not the case, obtain the appropriate mains adapter foryour notebook. Do not use any other voltage converter!►Check whether the local mains voltage and the power cable are compatible. If this isnot the case, buy a power cable that matches the local conditions.►Enquire with the corresponding government office of the country you will betravelling in as to whether you may operate the radio component integrated in yournotebook there (see also "CE marking", Page 102).Fujitsu 13
Important notesNotebook: transportingProtect the notebook from severe shocks and extreme temperatures(e.g. direct sunlight in a car).►If your device has an optical drive, remove all data media (e.g. CD, DVD) from the drives.TransportationNotebook►Switch the notebook off.►Unplug the mains adapter and all external devices from the power socket.►Disconnect the mains adapter cable and the data cables for all external devices.►Close the LCD screen.►To protect against damaging jolts and bumps, use a notebook carryingcase to transport your notebook.Cleaning the notebookDo not clean any interior parts yourself; leave this job to a service technician.Only use cleaning products designed for computers. Normal householdcleaners and polishes can damage the markings on the keyboard and thedevice, the paintwork or the notebook itself.Ensure that no liquid enters the notebook.The LCD screen very sensitive to scratches. Only clean the displaysurface with a very soft, slightly damp cloth.►Switch the notebook off.CleaningNotesNotebo okKeyboardTouchpadLCDscreenCrystalView display►In order to prevent accidentially switching the device on, remove the power cable from the mainsadaptor and remove the battery (see "Removing and installing the battery", Page 46).The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth which hasbeen moistened in mild domestic detergent and then carefully wrung out.To clean the keyboard and the touchpad, if available, you can use disinfectant wipes.Ensure that no liquid enters the device.14 Fujitsu
First-time setup of your deviceFirst-time setup of your deviceFirst- timese tupGettingstartedPlease read the chapter "Important notes", Page 12.If your device is equipped with a Windows operating system, the necessaryhardware drivers and supplied software are already pre-installed.Beforeyouswitchonthedeviceforthefirst time, connect it to the mains voltageusing the mains adapter, see "Mains adapter connecting", Page 16.Themainsadapter must be connected during the entire installation process.A system test is performed when your device is first switched on. Various messagescan appear. The display may remain dark for a short time or may flicker.Please follow the instructions on the screen.NEVER switch off your device during the first-time setup process.On delivery, the battery can be found in the battery compartment or in the accessories kit.The battery must be charged if you want to operate your device using the battery.When used on the move, the built-in battery provides the device with the necessary power. Youcan increase the operating time by using the available energy-saving functions.For instructions on how to connect external devices (e.g. mouse, printer) to yourdevice, please refer to the operating manual for your device.Unpacking and checking the deviceShould you discover any damage that occurred during transportation,notify your local sales outlet immediately!►Unpack all the individual parts.PackagingT ransport►Check your device for any visible damage which may have occurred during transportation.You may need the packaging in the future, if you need to transport your device.Fujitsu 15
First-time setup of your deviceSelecting a locationSelectingalocationDeviceMainsadapt erSelect a suitable location for the device before setting it up. Followthe instructions below when doing so:• Never place the device or the mains adapter on a heat-sensitive surface.The surface could be damaged as a result.• Never place the device on a soft surface (e.g. carpeting, upholstered furniture,bed). This can block the air vents and cause overheating and damage.• The underside of the device heats up during normal operation. Prolonged contactwith the skin may become unpleasant or even result in burns.• Place the device on a stable, flat, non-slippery surface. Please note that therubber feet of the device may mark certain types of delicate surfaces.• Keep other objects at least 100 mm away from the device and itsmains adapter to ensure adequate ventilation.• Never cover the ventilation slots of the device.• Do not expose the device to extreme environmental conditions. Protectthe device from dust, humidity, and heat.Mains adapter connectingPreparingforo perationMainsadapterObserve the safety notes in the enclosed "Safety/Regulations" manual.The supplied power cable conforms to the requirements of the country inwhich you purchased your device. Make sure that the power cable is approvedfor use in the country in which you intend to use it.312►Connect the power cable (1) to themains adapter.►Plug the mains cable (2) into a mains outlet.►Connect the mains adapter cable (3) tothe DC jack (DC IN) of the device.16 Fujitsu
First-time setup of your deviceSwitching on the device for the first timeSwitchingonforthefirstt imeOn devices with ON/OFF switch for wireless components: Slide the ON/OFF switchfor wireless components to the ON position before switching on the device.When you switch on the device for the first time, the supplied software isinstalled and configured. Because this procedure must not be interrupted,you should set aside enough time for it to be fully completed and connectthe device to the mains using the mains adapter.During the installation process, DO NOT restart the device unlessyou are requested to do so!To make it easier to use your device for the first time, the operating systemis pre-installed on the hard disk.1►Slide the ON/OFF switch (1) to the right to switch on the notebook.The ON/OFF switch returns automatically to its original position.►During installation, follow the instructions on screen.If a Windows operating system is installed on your device, you will find moreinformation on the system and drivers, help programmes, updates, manuals etc. onthe device or on the Internet under "http://www.fujitsu.com/fts/support/".Fujitsu 17
Working with the notebookWorking with the notebookNotebook,operati onNotebookThis chapter describes the basics for operating your notebook. Please read the chapterentitled "Connecting external devices", Page 75 for instructions on how to connectdevices such as a mouse and a printer to the notebook.Please refer to the notes in "Important notes", Page 12.Status indicatorsStatusindicatorsSymbolsThe status indicators provide information about the status of the power supply,the drives and the keyboard functions etc.18 Fujitsu
Working with the notebookStatus displays DescriptionPower-on indicator• Indicator is illuminated: The notebook is switched on.• Indicator flashes: The notebook is in sleep mode (Save-to-RAM).• The indicator is not illuminated: The notebook is switched off or inSave-to-Disk mode.Battery charging indicatorThe battery charging indicator shows whether a battery is installed and beingcharged.Battery indicatorThis description applies for both batteries.The battery indicator shows the state of charge of the installed battery.• The indicator is lit green: The battery is between 51 % and 100 %charged.• The indicator is lit orange: The battery is between 13 % and 50 %charged.• The indicator is lit red: The battery is between 0 % and 12 % charged.• The indicator flashes orange: The battery state of charge is beingchecked (for four seconds after battery installation).• The indicator flashes red: The battery is faulty.• The indicator is not lit: There is no battery installed.Note: if you use batteries with a capacity of 5800 mAh or 6200 mAh, you canalso check the charge status on the battery itself.Note: You can also check the state of charge directly at the main battery.Drive indicatorIndicator is illuminated: The hard disk drive or the CD/DVD in the optical driveof the notebook is being accessed.Num Lock indicatorIndicator is lit: The Num key has been pressed. The virtual numericalkeypad is activated. You can output the characters indicated on the upperrightofthekeys.Caps Lock indicatorIndicator is lit: The Caps Lock key has been pressed. All letters will be outputas uppercase letters. In the case of keys labelled several times, the characterprinted on the upper left of the key will appear when that key is pressed.Scroll Lock indicatorIndicator is lit: The key combination Fn +Scr has been pressed. The effectthat this key has varies between applications.Lock Workstation indicatorThe indicator is illuminated: The security functions of the Notebook havelocked your workstation.Fujitsu 19
Working with the notebookOpening the notebook1►Open the LCD screen.20 Fujitsu
Working with the notebookSwitching on the notebookNotebook:sw itchingonPower-onindicatorSuspend/Resumebu tton1►Slide the ON/OFF switch (1) to the right to switch on the notebook.The ON/OFF switch returns automatically to its original position.The ON/OFF switch (1) lights up whenever the system is switched on.Programming the ON/OFF switchYou can program the ON/OFF switch:Operating system MenuWindows 7 Start - (Settings) - Control Panel - System andSecurity - Power OptionsIf you have assigned a password, you must enter this when requested todo so, in order to start the operating system. Detailed information can befound in the chapter "Security functions", Page 68.Fujitsu 21
Working with the notebookDifferent ways to use your notebookDuring your daily work, you can use your notebook as a tablet PC or as a notebook, just as you wish.Note the direction of rotation in the following description! No guarantee claimscan be met for damage caused by turning in the wrong direction.You must note that the display cannot be turned completely on its own axis!From notebook to Tablet PC►Raise the LCD display into a vertical position.22 Fujitsu
Working with the notebook►Hold the screen as low as possible on both sides. Turn the screen to the left or right in the directionof the arrow. At first you will feel some slight resistance, then it will turn easily and without friction.►Turn the display further until it has turned 180° and the hinge latches in.Fujitsu 23
Working with the notebook►Now fold the screen down until the back of the screen is flat on top of the keyboard.The screen is now secured in the tablet position.Select display orientation (portrait or landscape orientation)LandscapeorientationPortraitorientationDisplayorientationYou can choose to use either portrait or landscape orientation for the display. To switchbetween portrait or landscape orientation, press the tablet button:Windows 7You can change these settings in the Fujitsu menu or under Start -(Settings -)Control Panel -Hardware and Sound -Display -Settings.Profiles for operating with various different screen modes can be selected viathe Fujitsu Tablet Control option in the Fujitsu menu. These profiles have presetstandard configurations that can be modified as desired.These settings do not just affect the monitor settings on the Tablet PC, butalso any external monitors that may be connected.24 Fujitsu
Working with the notebookFrom Tablet PC to notebook1►Raise the LCD screen into a vertical position.Fujitsu 25
Working with the notebookNote the direction of rotation in the following description! No guarantee claimscan be met for damage caused by turning in the wrong direction.►hold the screen as near to the bottom as possible on both sides and turn the screen in thedirection indicated by the rotational direction indicator. It will turn easily and without resistance.►Turn or move the display further until it has turned 180° and the hinge latches in.Switching off the notebookNotebook►Close all applications and then shut down the operating system (pleasesee the "Operating System Manual").►Slide the ON/OFF switch towards the right.The ON/OFF switch returns automatically to its original position.26 Fujitsu
Working with the notebookClosing the notebook►Fold the LCD screen down onto the lower part of the notebook until you feel it lock into place.Handwriting recognition under Windows 7Handwriting recognition under Windows 7 currently supports the following languages:English, German, French, Italian, Japanese, Korean, Chinese (traditional and simplified), Dutch,Portuguese, Spanish, Brazilian, Norwegian (Bokmål and Nynorsk), Swedish, Finnish, Danish,Polish, Rumanian, Serbian (Cyrillic and Latin script), Catalan, Russian, Czech and Croatian.Fujitsu 27
Working with the notebookLCD screenLCDscreenNotesHigh-quality TFT displays are installed in notebooks from Fujitsu Technology Solutions GmbH. Fortechnical reasons, TFT monitors are manufactured for a specific resolution. An optimal, clearpicture can only be ensured with the correct resolution intended for the relevant TFT monitor. Amonitor resolution which differs from the specification can result in an unclear picture.The screen resolution of the LCD monitor of your notebook is optimally set at the factory.The standard of production techniques today cannot guarantee an absolutely fault-free screendisplay. A few isolated constant lit or unlit pixels (picture elements) may be present. The maximumpermitted number of pixels faults is stipulated in the international standard ISO 9241-3 (Class II).Example:A screen with a resolution of 1280 x 800 has 1280 x 800 = 1024000 pixels. Each pixel consists ofthree subpixels (red, green and blue), so there are about 3 million subpixels in total. According to ISO9241-3 (class II), a maximum of 2 light and 2 dark pixels and in addition 5 light or 10 dark subpixelsor an equivalent mix (1 light subpixel counts as 2 dark subpixels) are allowed to be defective.At a resolution of 1600 x 900 = 1440000 pixels, a maximum of 3 light and 3 dark pixelsand in addition 7 light or 14 dark subpixels are allowed to be defective.Pixel A pixel consists of 3 subpixels, normally red, green andblue. A pixel is the smallest element that can be generatedby complete functionality of the display.Subpixel A subpixel is a separately addressable internal structurewithin a pixel that enhances the pixel function.Cluster A cluster contains two or more defective pixels orsubpixels in a 5 x 5 pixel block.Background lightingTFT monitors are operated with background lighting. The luminosity of the backgroundlighting can decrease during the period of use of the notebook. However, you canset the brightness of your monitor individually.Synchronising the display on the LCD screen and an external monitorFor more information, please refer to the chapter "Key combinations", Page 40under "Display output, switch between".Ambient Light SensorIn the case of delivery with a Windows operating system, the screen brightness is regulatedby means of the ambient light sensor and depending on the particular light conditions. Thisresults in optimum readability and longer battery life at the same time.Using a device as a tablet PCYou can execute commands as follows:• using the stylus pen (supplied with your device).• using your fingers28 Fujitsu
Working with the notebookUsing fingersYou can execute certain commands by using your finger tip on the touchscreen of your device.Everything which you can select or activate using your finger tip can alsobe selected or activated using the stylus pen.Calibrate the Dual Digitizer for finger-based operation of the device.Please see the appropriate supplementary sheet for instructions on how tocalibrate your device to use Dual Digitizer Technology.Please note: There are separate calibration programs available for calibratingthe stylus pen and for calibrating finger-based operation. In each case, use thecalibration tool described in the supplementary sheet. Do not use the calibrationtool for the stylus pen to calibrate finger-based operation.Actions with one fingerAction DescriptionSelecting objects (click with the left mousebutton)►With your finger, tap once brieflyontheobject.Starting programs (double-click with the leftmouse button)►With your finger, tap twice briefly in quicksuccssion on the program icon.Moving objects/windows (drag with left mousebutton pressed, Drag & Drop)►Place a finger directly on the object/window,hold the finger pressed against thetouchscreen and move the desiredobject/window.Opening a context menu (click with the rightmouse button)►Touch the desired item once with your fingertip. Keep the finger tip pressed against thetouchscreen.The context menu appears.Moving the cursor ►Position one finger on the touchscreen andmove the finger in the desired direction.Fujitsu 29
Working with the notebookActions with two fingersAction DescriptionScrolling►Position two fingers on the touchscreen.►Move your fingers upwards to scroll up.or►Move your fingers downwards to scrolldown.Rotating►Position the thumb on the touchscreen,then turn the picture clockwise orcounter-clockwise using your index finger.30 Fujitsu
Working with the notebookAction DescriptionIncreasing or decreasing the view►Position two fingers on the touchscreen andmove them apart to increase the view.or►Position two fingers on the touchscreen andmove them together to decrease the view.Blocking context-sensitive menus ►With two fingers, tap twice briefly in quicksuccession on the touchscreen.Fujitsu 31
Working with the notebookUsing the stylus pen31241 = pen tip2 = rocker button3 = eyelet for pen cord4 = eraserYou can use the pen on your notebook as an electronic writing implement to selectitems and to navigate through menu options and programs. Programs that supporthandwriting recognition also allow you to write characters directly on the screen withthe pen. You can also use the pen as a drawing tool.The notebook pen is retained securely in the pen slot. This ensures that the pen cannot belost, regardless of whether you use the notebook as a Tablet PC or as a notebook, or transportit while travelling. Always replace the pen in its slot when you are not using it.The notebook is supplied with a pen cord which you can attach to the eyeletson the pen and on the notebook.Only use the pen provided with your notebook. Do not use substitute pen tipsthat were not specially designed for your notebook. Replace the stylus tip if itis worn. The warranty does not cover a scratched screen.While writing, you should take care not to scratch the surface of thedisplay (e.g. with a wristwatch or bracelet).32 Fujitsu
Working with the notebookThe pen of your notebook is an electronic instrument which can be damagedif used incorrectly. Handle the pen with care.The following list contains guidelines for proper pen handling:• Do not gesture with the pen.• Do not use the pen as a pointer.• Never use the pen on any other surface than the screen of your notebook.• Do not try to turn the thumb grip on the pen. The thumb grip is used toplace the pen in its slot and to take it out of the slot.• Never store the pen with the tip bearing the weight of the pen (e.g. with the tip downin a pen holder). If the pen is stored with the tip pointing down, this may havean adverse effect on the pen mechanism (particularly under high temperatures).In this case the pen tip may react as though it is constantly being pressed down.To avoid damage, the pen should be stored in the pen slot when not in use.Thepencanbeinfluenced by electromagnetic fields (cursor quivers orjumps). There may be a few areas on the screen where the cursor quiversslightly in spite of pressing the pen down firmly.The screen responds to entries made with the tip of the finger or the pen when the tipof the finger or the pen is in direct contact with the screen.You can use the pen to perform all the functions for which you would otherwise use a mouse.In addition, you can conveniently delete hand-written pen entries using the pen.Handling Mouse PenSelecting menuentries Click with the left-hand mouse button. Touch the menu entry with the pen tip.Starting programs Double click with the left-hand mousebutton. Briefly touch the program icon twicewith the pen tip.Movingobjects/windows Drag with the left-hand mouse buttonheld pressed. Place the pen tip directly on theobject/window. Hold the pen tippressed against the screen. Move thedesired object/window.Opening a contextmenu Click with the right-hand mousebutton. Touch the desired element with thepen and leave the pen on the elementfor a moment.Moving the cursor -Place the pen tip directly on thescreen.Setting the penOperating system MenuWindows 7 Under Hardware and Sound – Pen and Input Devices in the Control Panelyou can change various settings for the pen (assignment and function ofthe pen button).Fujitsu 33
Working with the notebookCalibrating the penBefore using the pen for the first time, you should calibrate it so that the cursor follows themovements of the pen as accurately as possible. You should also always repeat the calibrationif the co-ordination between the pen and cursor movement deteriorates.Operating system MenuWindows 7 To calibrate, call up the Hardware and Sound / Tablet PC Settings functionin the Control Panel. You need to calibrate both portrait and landscapeformats.Replacing the pen tipWith use, the pen tip may become worn or may pick up foreign particles that can scratch the screen.A damaged or worn tip may not move freely, causing unpredictable results when using the pen.If your pen exhibits these problems, you should replace the pen tip. To do this, use the supplied tool (1).1►To remove the tip, position the tip in the gapbetween the two ends of the tool supplied.►Pinch the two ends of the supplied tooltogether so that thetipisfirmly clasped,then pull it from the barrel.►To replace the tip, retrieve one of thenew tips that were supplied your pen.Insert the flat end of the tip into thebarrel and exerting gentle pressure, pushit in until it is firmly in place.If the tip is worn or damaged, discard it.Installing a pen cordYou should attach the pen with a pen cord to prevent accidentally dropping or losing it.►Attach the end of the pen cord with the smaller loop to your pen.►Attach the end of the pen cord with the larger loop to your notebook.34 Fujitsu
Working with the notebookUsing the device as a notebookTouchpad and touchpad buttonsKeep the touchpad clean. Protect it from dirt, liquids and grease.TouchpadTouchpadDo not use the touchpad if your fingers are dirty.Do not rest heavy objects (e.g. books) on the touchpad or the touchpad buttons.121 = Touchpad2 = Touchpad buttonsThe touchpad enables you to move the mouse pointer on the screen.The touchpad buttons allow you to select and execute commands. They correspondto the buttons on a conventional mouse.You can use a key combination to disable the touchpad, to avoid accidentally movingthe pointer on the screen (see also "Key combinations", Page 40).Moving the pointer►Move your finger on the touchpad.TouchpadThe pointer will move.Selecting anitem►Move the pointer to the item you wish to select.Touchpad►Tap the touchpad once or press the left button once.The item is selected.Executing commands►Move the pointer to the field you wish to select.Tou chp ad►Tap the touchpad twice or press the left button twice.The command is executed.Fujitsu 35
Working with the notebookDragging items►Select the desired item.Touchpad►Press and hold the left button and drag the item to the desired positionwith the finger on the touchpad.The item will be moved.Switching the Touchpad on and offYou can switch the Touchpad on and off using a key combination,see "Key combinations", Page 40.36 Fujitsu
Working with the notebookKeyboardKeyboardNumerickeypadNumer ickeypadButtonsThe keyboard of your notebook is subject to continuous wear through normaluse. The key markings are especially prone to wear. The key markings areliable to wear away over the life of the notebook.The keyboard has been designed to provide all the functions of an enhanced keyboard.Some enhanced keyboard functions are mapped with key combinations.The following description of keys refers to Windows. Additional functions supported by the keysare described in the relevant manuals supplied with your application programs.The figure below shows how to access the different characters on keys with overlaid functions.The example applies when the Caps Lock key has not been activated.The illustrations shown below may differ from your actual device.0=}++NumAlt Gr  =    0}=    0}=    0}=    0}Fujitsu 37
Working with the notebookKey DescriptionBackspace keyThe Backspace key deletes the character to the left of the cursor.BackspaceBac kspaceTab keyThe Tab key moves the cursor to the next tab stop.TabkeyEnter key (return)The Enter key terminates a command line. The command you have enteredis executed when you press this key.EnterkeyReturnEnterLinef eedCaps Lock keyThe Caps Lock key activates the Caps Lock mode, and the correspondingicon is displayed in the Windows information area. In Caps Lock mode, allof the characters you type appear in upper case. In the case of overlaykeys, the character printed on the upper left of the key will appear whenthat key is pressed. To cancel the Caps Lock function, simply press theCaps Lock key again.ShiftkeyCapsLockShift keyThe Shift key causes uppercase characters to appear. In the case of overlaykeys, the character printed on the upper left of the key appears when thatkeyispressed.ShiftkeyShiftFn buttonThe Fn key enables the special functions indicated on overlay keys (see"Key combinations", Page 40).FnkeyCursor keysThe cursor keys move the cursor in the direction of the arrow, i.e. up, down,left, or right.CursorkeysCursorcontrolkeysStart keyThe Start key opens the Windows Start menu.StartkeyMenu keyThe Menu key invokes the menu for the marked item.38 Fujitsu
Working with the notebookVirtual numeric keypadNumerickeypadVirtualnumericke ypadNumLockTo provide the convenience of a numeric keypad, your keyboard is equipped with a virtualnumeric keypad. The special keys of the virtual numeric keypad are recognisable by the numbersand symbols printed in the upper right corner of each key. If you have switched on the virtualnumeric keypad, you can output the characters shown on the upper right of the keys.The keyboard layout shown below may differ from your actual device.1 = Valid characters when the Numkey is not activated 2 = Valid characters when the Numis activatedFurther information about the status indicators can be found in chapter "Status indicators", Page 18.Country and keyboard settingsIf you want to change the country and keyboard settings, proceed as follows:►Enter the settings by clicking Start – (Settings) – Control Panel – Time, Regional and Language Options.Fujitsu 39
Working with the notebookKey combinationsThe key combinations described below apply when using Microsoft Windowsoperating systems. Some of the following key combinations may not function inother operating systems or with certain device drivers.Key combinations are entered as follows:►Press the first key in the combination and keep it pressed.►While holding the first key down, press the other key or keys in the combination.Combination DescriptionSwitching the loudspeakers on/offThis key combination switches the integrated loudspeakers on andoff.Fn+F3Loudspea kerLoudspeakerEnable/disable touchpadThis key combination enables and disables the touchpad.Fn+F4TouchpadTouchpadbuttonsTouchpadDecrease screen brightnessThis key combination decreases the brightness of the screen.Fn+F6LCDscreenScreenbrightnessIncrease screen brightnessThis key combination increases the brightness of the screen.Fn+F7Screen brightnessDecrease volumeThis key combination reduces the volume of the internalloudspeakers.Fn+F8VolumeIncrease volumeThis key combination increases the volume of the internalloudspeakers.Fn+F9Volume40 Fujitsu
Working with the notebookCombination DescriptionToggle output screenFn+F10Toggleoutputs creenUse this key combination to select which screen(s) is/are used fordisplay if an external monitor is connected.Screen output is possible:• only on the notebook’s LCD screen• only on the external monitor• on the notebook’s LCD screen and the external monitor at thesame time.Press the key combination several times to switch through allpossible settings.It is possible to display video on two screens simultaneously,regardless of the type and number of external screens connected.If you have connected two external monitors to the port replicator,the following display outputs are possible:• only on the notebook’s LCD screen• only on the external monitor (analogue)• at the same time on the LCD screen (digital)• at the same time on the notebook’s LCD screen and on theexternal monitor (analogue)You cannot use the key combination to switch output at the sametime to both external monitors on the Port Replicator.+Ctrl CHalt current operationThis key combination can be used to halt an operation instantlywithout clearing the keyboard buffer.Back tabThis key combination moves the cursor back to the previous tabstop.Shift+TabTabbackFujitsu 41
Working with the notebookTablet buttonsYour notebook has six multifunctional tablet buttons. You can navigate on the screen with asimple press of a button, call preset applications or ones that you have set yourself.The tablet buttons have different uses in different modes.In addition, you can still individually program some of the tablet buttons,see "Programming the tablet buttons", Page 43.42 Fujitsu
Working with the notebookBasic functions when the device has bootedButton Basic functionWindows buttonThis button corresponds to the function of the Windows Start key on a keyboard.If the button is pressed in combination with the ON/OFF switch, the functioncorresponds to the key combination Ctrl +Alt +Del .Decrease volumeThis button reduces the volume of the built-in loudspeakers.Increase volumeThis button increases the volume of the built-in loudspeakers.Rotation LockWhen you press this button, the orientation of the screen display changes fromportrait (vertical) to landscape (horizontal) or vice versa.When you would like to use the Tablet PC as an eBook, for example, you woulduse the portrait orientation.When accessing spreadsheets, you would more typically use a landscapeorientation.Windows 7:This button locks and unlocks the automatic rotation of the display.Button "A"This button starts the Fujitsu Menu application. You can use this application tochange certain system settings.The button is freely programmable.Button "B"Use this button to start the Windows Journal.The button is freely programmable.Programming the tablet buttonsYou can program the tablet buttons to open a specific application or executea specific function when pressed.Proceed as follows:►In Control Panel, select the option to manage the settings for the tablet buttons and pen.►Follow the instructions on the screen and program the tablet buttons as you require.Fujitsu 43
Working with the notebookWebcamWebcamDepending on the software used, you can use your Webcam to take pictures,record video clips or take part in web chats.• The picture quality depends on the lighting conditions and the software being used.• You can only operate the webcam with a particular application (e.g. an Internet telephonyprogram or a video conferencing program which supports a webcam).• When using the webcam the notebook support must not wobble.• The webcam automatically adjusts itself to the current light level. For this reasonthe LCD screen may flicker while the light level is adjusted.Further information on using the webcam and on the additional settingswhich are possible for your webcam can be found in the help functionof the program which uses the webcam.If you would like to perform a function test of your web cam, there is suitable testsoftware available at "http://www.fujitsu.com/fts/support/index.html".44 Fujitsu
Working with the notebookRechargeable batteryRechargeablebatteryBatteryLife,batteryRechargeablebatteryRechargeablebatteryWhen not plugged into a mains socket, the notebook runs on its built-in battery. Youcan increase the life of the battery by caring for the battery properly. The averagebattery life is around 500 charge/discharge cycles.You can extend the battery life by taking advantage of the available energy saving functions.Charging, caring for and maintaining the batteryBatteryBatteryThe notebook battery can only be charged, when the ambient temperatureis between 5°C and max. 35°C.You can charge the battery by connecting the notebook to the mains adapter(see "Mains adapter connecting", Page 16).If the battery is running low you will hear a warning alarm. If you do not connect the mains adapterwithin five minutes of the warning alarm described above, your notebook will automatically switch off.monitoring the battery charging levelBatteryBatterystatusmeterWindows also has a "Battery status meter" in the taskbar for monitoring the battery capacity. Whenyou place the mouse pointer on the battery symbol, the system displays the battery status.The battery capacity can be monitored using an indicator which shows the current stateof charge. Use the following menu to enable this feature:Operating system MenuWindows 7 Start – (Settings) – Control panel – Mobile PC –Power optionsBattery storageBatteryBatterySelf-discharge,batteryChargingcapacity, batteryKeep the battery pack between 0°C and +30°C. The lower the temperature at whichthe batteries are stored, the lower the rate of self-discharge.If you will be storing batteries for a longer period (longer than two months),the battery charge level should be approx. 30 %. To prevent exhaustivedischarge which would permanently damage the battery, check the levelof charge of the battery at regular intervals.To be able to make use of the optimal charging capacity of the batteries, the batteryshould be completely discharged and then fully recharged.If you do not use the batteries for long periods, remove them from thenotebook. Never store the batteries in the device.Fujitsu 45
Working with the notebookRemoving and installing the batteryOnly use rechargeable batteries approved by Fujitsu TechnologySolutions for your notebook.Never use force when fitting or removing a battery.Make sure that no foreign bodies get into the battery connections.Never store a battery for longer periods in the discharged state. Thiscan make it impossible to recharge.Removing the battery►Prepare for removal, see chapter "Preparing to remove components", Page 83.213►Slide the release button (1) in direction of the arrow.►Slide the release button (2) in direction of the arrow.►Lift the battery out of the battery compartment (3).46 Fujitsu
Working with the notebookInserting battery231►Place the battery on the lower edge of the battery compartment (1).►Slide the battery into the battery compartment until you feel it engage (2).►Slide the release button into its locked position (3).►Complete the removal, see chapter "Finishing component removal", Page 89.Fujitsu 47
Working with the notebookBatterychargestatusindicatorYou can check the charge status directly on the battery itself.11a►Press the key (1).The LED (a) lights up in one of the following colours:LED indicator State of chargeGreen The battery is between 50 % and 100 %charged.Orange The battery is between 11 % and 49 % charged.Red The battery is between 1 % and 10 % charged.LED not lit The battery is fully discharged.48 Fujitsu
Working with the notebookModuleModulebayModulesThe design of your notebook enables the flexible use of notebook batteries and drives. Thefollowing modules can be operated in the module bay of your notebook:• Second battery• Optical drive• Empty plug-in unit (save weight)Only use modules designed for your notebook.Do not use force when installing or removing the module.Make sure that no foreign objects enter the module bay.You can swap modules during operation. This means you do notneed to switch off the notebook.To replace a module, simply click on the corresponding icon in thetask bar and then on Exit or Select - Exit.The module can now be removed without any further actions being necessary.Removing a module12ModuleDriveWeight Saver►Slide the release lever in the direction of the arrow (1).►Now pull the module out of the module bay (2).Fujitsu 49
Working with the notebookInstalling a module►Place the module into the module bay so that the contacts enter first.►Push the module into the module bay until you feel it locking into place.Optical driveOpticaldriveThis product contains a light emitting diode, classification according to IEC 608251:2007: LASER CLASS 1, and must therefore not be opened.Handling data carriersHandlingObserve the following guidelines when handling data carriers:• Avoid touching the surface of a data carrier. Only handle data carriers by their edges.• Always store data carriers in their cases. This will protect the data carrier againstbeing covered in dust, scratched or damaged in any other way.• Protect your data carriers against dust, mechanical vibrations and direct sunlight.• Avoid storing a data carrier in areas subject to high temperatures or humidity.You may use both 8-cm and 12-cm data carriers in the optical drive.When using a data carrier of lesser quality, vibrations and reading errors may occur.50 Fujitsu
Working with the notebookCD/DVD indicatorCD/DVDindicatorThe CD/DVD indicator flashes when a data carrier is inserted. The indicator goes out whenthe drive is ready for reading. The indicator lights up when the drive is being accessed.You may only remove the data carrier when the indicator is unlit.If the CD/DVD indicator does not go out after a data carrier has been inserted, butinstead continues to flash, this means that the drive cannot access the data carrier.Either the data carrier is damaged or dirty or you are using a datacarrier that the drive cannot read.Inserting or removing a data carrierInsertingRemovingThe notebook must be switched on.21►Push the insert/eject button (1).The drive tray will open.►Gently pull the drive tray (2) completely out.►Place the data carrier in the drive tray withthe printed side facing upwards.or►Remove a data carrier that hasbeen inserted.►Push in the drive tray until youfeel it lock into place.Fujitsu 51
Working with the notebookManual removal (emergency removal)CD/DVD:ManualremovalofdatacarrierEmergencyrem ovalofdata carrierIn the event of a power failure or damage to the drive, you can remove the data carrier manually.12►Switch your notebook off.►Push a pen or a piece of wire (such as apaperclip) firmly into the opening (1).The drive tray is ejected. You can now pullthe drive tray (2) out of the drive.Removing and fitting the dust removal cover(ventilation slot cover)In order to ensure optimum cooling of the components in your notebook, youshould periodically clean the ventilation slot of the heatsink.This ensures optimum fan performance. You can achieve the best cleaningresults with a small hand-held vacuum cleaner.If necessary, you can also use a dry brush to release dust from the ventilation slots.Do not use any cleaning liquids! Ensure that no liquid enters the device.To avoid overheating of the device, do not remove the ventilation slotcover when the device is switched on.►Prepare for removal, see chapter "Preparing to remove components", Page 83.12►Press and hold the lock of the ventilationslot cover (1) and remove it from its slot (2).►Clean the dust chamber.52 Fujitsu
Working with the notebook1►Insert the ventilation slot cover into theslot (1) at an angle as shown, and ensurethat you feel it click into place.►Complete the removal, see chapter"Finishing component removal", Page 89.Fujitsu 53
Working with the notebookUsing the power-management featuresPowerPowerBatteryThe notebook uses less power when the available power-management features are used. Youwill then be able to work longer when using the battery before having to recharge it.Power efficiency is increased and environmental pollution reduced. Bychoosing the best power options, you can make significant savings andat the same time help protect the environment.When you close the LCD screen, depending on the setting in Windows, thenotebook automatically enters a power saving mode.We recommend the following settings:Function On external power On battery powerTurn off monitor After 10 minutes After 5 minutesTurn off hard disk(s) After 15 minutes After 10 minutesEnergy saving (S3) After 20 minutes After 15 minutesHibernate mode (S4) After 1 hour After 30 minutes►Select the power management functions in your Control Panel.►Select the Screen Saver in your Control Panel.or►Right-click on the desktop. Switch on the screen saver by clicking Personalization –Change screen saver.If you need further information about an option, you can get help with mostsettings by pressing F1 to open the Microsoft Help.When the notebook is in power-saving mode, the following must be remembered:During power saving mode, open files are held in the main memoryorinaswapfile on the hard disk.Never turn off your notebook while it is in a power saving mode. If the built-in battery isnearly empty, close the open files and do not go into power saving mode.If you do not intend to use your notebook for a long period of time:►Exit power saving mode if necessary via the mouse or keyboard or by switching on thenotebook.►Close all opened programs and completely shut down the notebook.54 Fujitsu
Working with the notebookMemory cardsSlotYour notebook is equipped with an integrated memory card reader.Observe the manufacturer’s instructions when handling the memory cards.MemorycardSupported formatThe memory card reader supports the following format:• Secure Digital (SDTM card)Inserting the memory card►Carefully slide the memory card into theslot. The label should be facing upward. Donot apply excessive force, as otherwise thedelicate contact surfaces could be damaged.MemorycardDepending on the particular typeused, the memory card may protrudeslightly from the slot.Fujitsu 55
Working with the notebookRemoving the memory cardMemorycardIn order to protect your data, always follow the correct procedurefor removing the card outlined below.You can stop the memory card via the corresponding icon in the task bar:►Left-click on the icon.►Select the card you want to stop and remove.►Press the Enter key.Wait for the dialogue box which tells you that it is now safe to remove the memory card.12►On devices with card locking: Presson the storage card (1).MemorycardThe storage card is released andcan now be removed.►Pull the storage card out of the slot (2).ExpressCardsSlotExpressCar dAnExpressCardslotallowsanExpressCard/54tobeusedwiththecomputer.Consult the documentation supplied by the ExpressCard’s manufacturerand follow the instructions provided.Never use force when installing or removing an ExpressCard.Make sure that no foreign objects enter the ExpressCard slot.56 Fujitsu
Working with the notebookInserting the cardKeep the placeholder for the slot in a safe place. When you remove the card again, youmust reinstall the place holder. This prevents foreign objects from getting into the slot.12►Press the edge of the placeholder (1)to make the card placeholder protrudefrom the notebook’s case.►Pull the card placeholder out of the slot (2).►Insert the card into the slot guide withthe connection contacts first.►Gently push the card into the slot until youfeel it click into place. Do not use any force.Depending on the particular type used, thecard may protrude slightly from the slot.Please see the documentation relating to the card for driver installation instructions.Fujitsu 57
Working with the notebookRemoving the cardAlways remove the card according to the rules described below, toensure that none of your data is lost.You can stop the ExpressCard using the corresponding symbol in the task bar:►Click on the symbol for safe removal of hardware with the left mouse button.►Select the ExpressCard you want to stop and remove.►Press the Enter key.Wait for the dialogue box which tells you that it is now safe to remove the ExpressCard.12►Press the edge of the card (1) so that thecard protrudes a little from the notebook.►Pull the card out of the slot (2).2►Insert the card placeholder into theslot guide.►Gently slide the card placeholder into theslot until you feel it click into place.Loudspeakers and microphonesMicrophoneLoudspeakersBassloudspeak er(subwoofer)Volume controlInformation on the exact position of the speakers and microphone can befound in "Ports and controls", Page 9.Please refer to chapter "Key combinations", Page 40 for information on setting the volumeand also enabling/disabling the loudspeakers using key combinations.If you attach an external microphone, the built-in microphone is disabled.When you connect headphones or external speakers, the built-in speakers are disabled.Information on connecting headphones and a microphone can be foundin "Connecting external devices", Page 75.58 Fujitsu
Working with the notebookSIM cardA SIM card (Subscriber Identity Module) is a chip card which is inserted in a mobile phone ornotebook and, together with an integrated UMTS/LTE module, enables access to a mobile network.When handling SIM cards, follow the instructions supplied by the provider.Inserting the SIM card►Prepare for installation of the SIM card, see chapter "Preparing to remove components", Page 83.1►Slide the SIM card into the slot (1)until it is felt to engage, as shown inthe battery compartment.►Complete the installation, see chapter "Finishing component removal", Page 89.Removing the SIM card►Prepare for removal of the SIM card, see chapter "Preparing to remove components", Page 83.1►Press on the edge of the SIM card so thatit jumps up slightly out of the slot.►Pull the SIM card out of the slot in thedirection of the arrow (1).►Complete the removal, see chapter "Finishing component removal", Page 89.Fujitsu 59
Working with the notebookOptional Wireless LAN / Bluetooth / UMTS /LTE wireless componentsThe installation of radio components not approved by Fujitsu Technology Solutionswill invalidate the certifications issued for this device.Depending on the device configuration you ordered, your device will be equippedwith Wireless LAN, Bluetooth and/or UMTS / LTE.Switching the wireless components on and offBefore switching on your device for the first time, the on/off switch forradio components must be in the "ON" position.►Slide the ON/OFF switch into the "ON"position to activate the radio components.WirelessLA NWirelessLANBlueto othBlue toothor►Slide the ON/OFF switch to the"OFF" position to deactivate theradio components.If you switch off the radio components, the wireless LAN antenna and, when present,the Bluetooth module and UMTS/LTE module will be switched off.You can use the PlugfreeNetwork program to switch the installed radiocomponents on and off individually.You can also deactivate the wireless components individually in the BIOS Setup.For this to occur, you must either not have assigned a supervisor password or if asupervisor password has been assigned, you must know this password.Pay attention to the additional safety notes for devices with radio componentsprovided in the "Safety/Regulations" manual.Details on using Wireless LAN can be found in the online help systemincluded in the Wireless LAN software.You can find more information on how to use Bluetooth on the CD youreceived with your Bluetooth software.You can obtain more information on UMTS/LTE from your service provider.60 Fujitsu
Working with the notebookSetting up WLAN access• Requirement: A WLAN must be available and you must have thecorresponding access information.Information on configuring the WLAN access can be found in thedocumentation for your operating system.Access via UMTS / LTEIf you ordered an integrated UMTS / LTE module with your system, you can enjoy optimumreception and maximum energy efficiency without awkward cables or antennas. Theoptional UMTS / LTE module is ready for use straight away.If you did not order a UMTS / LTE module, you can purchase the accessories for UMTS /LTE reception from your retailer or your Fujitsu Technology Solutions dealer.You will find information on establishing the connection with the UMTS / LTE networkin the documentation for the hardware used.Your device can connect to the Internet via UMTS / LTE. To do this, use oneof the following types of connection:• Integrated UMTS / LTE module (availability dependent on your model variant)• a USB dongle (a USB stick with your mobile phone provider’s SIM card)• a mobile end-device (e.g. mobile phone with Bluetooth or cable connection)• UMTS ExpressCard (fits into the ExpressCard slot on your device)UMTS/LTE antenna1►To improve the signal strength of theUMTS/LTE, fold out the UMTS/LTE antennain the direction of the arrow (1).UMTSUMTSFujitsu 61
Working with the notebookEthernet and LANEthernetLANThe internal network module of your notebook supports Ethernet LAN. You can use it toestablish a connection to a local network (LAN = Local Area Network).21►Connect the network cable to the LANport of the notebook (1).►Connect the network cable to yournetwork connection (2).Your network administrator can help you to configure and use the LAN connections.The network cable is not included in the delivery scope. This type ofcable can be obtained from a specialist dealer.Your Port Replicator (optional)Your Port Replicator is a device that enables you to quickly connect your notebookto your peripherals, such as a monitor, printer etc.The features offered by the Port Replicator include standard ports formonitor, audio, mouse and keyboard.You need only dock the notebook in order to use your peripheral devices.62 Fujitsu
Working with the notebookPorts on the Port ReplicatorPortReplicatorPorts1122345678101191 = ON/OFF switch2 = USB ports (USB 3.0)3=DVIport4 = DisplayPort5 = VGA monitor port6 = LAN port7 = Headphone port8 = Security Lock device9 = DC input connector (DC IN)10 = Adjusting lever of the Port Replicator11 = Unlocking lever12 = Connector on the Port Replicator for thedocking port on the bottom of the notebookFujitsu 63
Working with the notebookSetting up the port replicatorSelect a suitable location for the port replicator before setting it up.Follow the instructions below when doing so:• Never place the port replicator on a soft surface (e.g. carpeting, upholstered furniture, bed).This can block the air vents of the notebook and cause overheating and damage.• Place the port replicator on a stable, flat and non-slip surface. Please note that theport replicator’s rubber feet may mark certain types of surface.• Never place the port replicator and the mains adapter on a heat-sensitive surface.• Do not expose the port replicator to extreme environmental conditions.Protect the port replicator from dust, humidity and heat.Connect the notebook to the port replicatorThe Port Replicator supports various LIFEBOOK models. The adjustinglever of the Port Replicator can be used to adapt the Port Replicatorto the size of the particular LIFEBOOK.Before connecting the notebook to the port replicator, check if the settinglever of the port replicator is in the right position. If necessary, adjustthe setting lever to the correct position.►Disconnect the mains adapter cable from the DC socket (DC IN) of the notebook.64 Fujitsu
Working with the notebook123►Position the notebook on the port replicator in such a way that the docking connector on theunderside of the notebook is aligned with the docking connector of the port replicator as shown.►Press down on the notebook’s rear corners so that it locks into position.►Connect the mains adapter cable to the DC jack (DC IN) of the port replicator (1).►Connect the power cable to the mains adapter (2).►Plug the power cable into the mains socket (3).Fujitsu 65
Working with the notebookSwitching on the notebook via the port replicator►Press the ON/OFF switch on the port replicator to switch the notebook on.Switching off notebook via Port Replicator►Close all applications and shut down your operating system (please referto the manual for the operating system).If the notebook cannot be shut down properly, press the ON/OFF buttonon the Port Replicator for approx. four seconds. The notebook will switchoff. Any unsaved data may however be lost.66 Fujitsu
Working with the notebookDisconnecting the notebook from the port replicatorProblems may occur if the notebook is removed from the port replicatorduring operation. We recommend that you switch off the notebook beforehandor use the Windows function Start – Undock.Windows 7Problems may occur if the notebook is removed from the port replicator duringoperation. We recommend that you switch off the notebook beforehand or usethe Windows function Start (arrow icon) – Undock.12►Pull the release button in the direction of the arrow (1).►Pick up the notebook (2).Fujitsu 67
Security functionsSecurity functionsSecurityfunctionsYour notebook has several security features that you can use to secure yoursystem from unauthorised access.This chapter explains how to use each function, and what the benefits are.Please remember that in some cases, for example, forgetting your password,you may be locked out and unable to access your data. Therefore,please note the following information:• Make regular backups to external data carriers such as external harddrives, CDs, DVDs or Blu-ray Discs.• Some security functions need you to choose passwords. Make a noteof the passwords and keep them in a safe place.If you forget your passwords you will need to contact the our ServiceDesk. Deletion or resetting of passwords is not covered by your warrantyand a charge will be made for assistance.Brief overview of security functionsDetailed information about the security equipment of your device can be found inthe "Professional Notebook" manual, on the "Drivers & Utilities" CD/DVD or onthe Internet at "http://www.fujitsu.com/fts/support/index.html".Security functions Type of protection PreparationSecurity Lock Mechanical Fit and lock the KensingtonLock Cable (accessory).Fingerprint sensor (dependingon the device) Biometric Install the supplied fingerprintsoftware.BIOS password protection Password protection for BIOSSetup, operating system andhard disk with supervisor anduser password. The passwordsconsist of a maximum of eightalphanumeric characters.Specify at least one supervisorpassword in the BIOS Setupand activate the passwordprotection for the operatingsystem and hard disk asdesired.Boot from removable media Prevents unauthorised bootingof an operating system fromexternal media (e.g. USB stick,USB CD-ROM drive etc.).In the BIOS Setup, go to theSecurity menu and edit theoption Boot from RemovableMedia.Owner Information Overlay service desk or ownerinformation during the bootprocess.In the BIOS Setup, go to theSecurity menu and edit theoption Owner Information.Trusted Platform Module(device dependent) Identification and authenticationof the notebook Define a supervisor passwordin the BIOS Setup and enablethe TPM (Security Chip).68 Fujitsu
Security functionsConfiguring the fingerprint sensorFingerprintsens orFingerprintsens orThe fingerprint sensor can record an image of a fingerprint. With additional fingerprintsoftware, this image can be processed and used instead of a password.1►You must install the fingerprint softwarein order to be able to use thefingerprint sensor (1).Using the Security LockYour device comes with a Security Lock device for the Kensington Lock Cable. You canuse the Kensington Lock Cable, a sturdy steel cable, to help protect your notebook fromtheft. The Kensington Lock Cable is available as an accessory.Fujitsu Technology Solutions recommends the use of a combination lock.►Fit the Kensington Lock Cable on thedevice on your notebook.UsingtheKensingtonLockCableSecurity LockMechanicalback upAnti-theftprotectionAttach another Kensington Lock Cable to your Port Replicator to protectyour Port Replicator from theft as well.Fujitsu 69
Security functionsConfiguring password protection in BIOS Setup UtilityBefore using the various options for password protection in the BIOS Setup utilityto increase data security, please observe the following:Make a note of the passwords and keep them in a safe place. If you forget yoursupervisor password you will not be able to access your notebook. Passwords arenot covered by your warranty and a charge will be made for assistance.Password protectionYour password can be up to eight characters long and contain letters and numbers.No distinction is made between uppercase and lowercase.Protecting BIOS Setup Utility (supervisor and user password)If you have opened these operating instructions on the screen, we recommend thatyou print out the following instructions. Because you cannot call the instructionsonto the screen while you are setting up the password.BIOSSetupUtilityYou prevent unauthorised use of the BIOS Setup Utility with both the supervisor and the userpassword. The supervisor password gives you access to all functions of the BIOS SetupUtility, while the user password only provides some of the functions. You can only set auser password if a supervisor password has already been assigned.Please refer to the ""Settings in BIOS Setup Utility", Page 90 section for adescription of how to call up and operate the BIOS Setup Utility.Setting supervisor and user password►Start the BIOS Setup Utility and go to the Security menu.►Select the Set Supervisor Password field and press the Enter key.With Enter new Password: you are asked to enter a password.►Enter the password and press the Enter key.Confirm new Password requires you to confirm the password.►Enter the password again and press the Enter key.Changes have been saved is a confirmation that the new password has been saved.►To set the user password, select Set User Password and proceed exactly aswhen configuring the supervisor password.If you do not want to change any other settings, you can exit BIOS Setup Utility.►In the Exit menu, select the option Save Changes & Exit.►Select Yes and press the Enter key.PasswordSupervisor passwordUserpasswordThe notebook will be rebooted and the new password will come into effect. It will now benecessary to first enter your supervisor or user password in order to open the BIOS Setup Utility.Please note that the user password only provides access to a few of the BIOS settings.70 Fujitsu
Security functionsChanging the supervisor or user passwordYou can only change the supervisor password when you have logged into theBIOS Setup Utility with the supervisor password.PasswordSupervisorpasswordUserpassword►Call the BIOS Setup Utility and go to the Security menu.►When changing the password, proceed exactly as for password assignment.Removing passwordsTo remove a password (without setting a new password) perform the following steps:PasswordSupervisorpasswordUserpassword►Start the BIOS Setup Utility and go to the Security menu.►Highlight the Set Supervisor Password or Set User Password field and press the Enter key.You will be requested to enter the current password by the Enter Current Password prompt.You will be requested to enter a new password by the Enter New Password prompt.►Press the Enter key twice.►In the Exit menu, select the option Save Changes & Exit.►Select Yes and press the Enter key.The notebook will now reboot with the password removed.Removing the supervisor password simultaneously deactivates the user password.Password protection for booting of the operating systemWith the supervisor password you have set in the BIOS Setup Utility (seesection "Setting supervisor and user password", Page 70), you can alsoprevent booting of the operating system.Operating systemActivating system protection►Start the BIOS Setup Utility and go to the Security menu.Operatingsystem►Select the PasswordonBootoption and press the Enter key.►Select the desired option (Disabled,First Boot or Every Boot) and press the Enter key►Select the Save Changes & Exit option under Exit.The notebook will reboot. You will be prompted to enter your password (the supervisor password).Deactivating system protection►Start the BIOS Setup Utility and go to the Security menu.Operatingsystem►Select the PasswordonBootoption and press the Enter key.►Select the Disabled option and press the Enter key.If you do not want to change any other settings, you can exit BIOS Setup Utility.►Select the Save Changes & Exit option under Exit.The notebook will reboot. The system is no longer password-protected.Fujitsu 71
Security functionsPassword protection for the hard diskPasswordprotect ion:The had disk password prevents unauthorised access to the hard disk drivesand is checked internally each time the system is booted. The condition for thisis that you have assigned at least the supervisor password.Activating hard disk protection►Call up the BIOS Setup and select the Security menu.If you have not assigned BIOS passwords yet, define the supervisor and the userpassword now, if desired (see "Security functions", Page 68).►Mark the Hard Disk Security field and press the Enter key.►In the Drive0 area mark the Set Master Password field and press the Enter key.Enter new Password then appears and you are asked to enter a password.►Enter the password and press the Enter key.Confirm new Password requires you to confirm the password.►Enter the password again and press the Enter key.Setup Notice: Changes have been saved is displayed to confirm that thenew password has been saved.►To assign the password for the second hard disk (Drive1), go to the Drive1 area andselect the field Set Master Password, then proceed in exactly the same way as forsetting up the password for the first hard disk (Drive0).The field Password Entry on Boot is set to Enabled by default. You can exit the BIOSSetup once you have finished changing the settings.►From the Exit menu, choose the option Exit Saving Changes.►Press the Enter key and select Yes.The notebook reboots and your hard disk is now protected with a password. The systemwill ask you to enter the password when the notebook is restarted again.Deactivating hard disk protectionTo cancel a password without setting a new one, proceed as follows:►Call up the BIOS Setup and select the Security menu.►Mark the Hard Disk Security field and press the Enter key.►In the Drive0 area mark the Set Master Password field and press the Enter key.You will be initially requested to enter the old password by the Enter current Password prompt.You will then be requested to enter a new password by the Enter new Password prompt.►After entering the password, press the Enter key three times.►From the Exit menu, choose the option Exit Saving Changes.►Press the Enter key and select Yes.The notebook reboots, and password protection for the hard disk is cancelled.►To cancel the password for the second hard disk (Drive1), go to the Drive1 areaand select the field Set Master Password, then proceed in exactly the same way asfor cancelling the password for the first hard disk (Drive0).72 Fujitsu
Security functionsUsing the security function of the tablet keysIf you have allotted a supervisor and/or user password in the form of tablet key combinations asdescribed below, you can use the tablet keys to enter this when you start your device.Setting the Supervisor password►Select Start - Run.►Enter the following at the command line: C:\Program Files\Fujitsu\SecurityPanel Application\Supervisor\FJSECS.EXE.►Confirm with Enter .►Follow the instructions on the screen.Setting the User password►Select Start - All Programs.►Select Security Panel Application – Security Panel Application.►Follow the instructions on the screen.Entering passwords using the tablet buttonsThe passwords to be entered via the tablet buttons are usually composed of a combination ofbutton presses, e.g. button 2+ button 3followed by button 1and the ENT button.►Enter your password using the buttons 1to 4.►Confirm by pressing ENT .The device will be unlocked.Fujitsu 73
Security functionsTrusted Platform Module (TPM) (device-dependent)TPMTrustedP latformModuleTo use the TPM, you must activate the TPM in the BIOS Setup before the softwareis installed. The condition for this is that you have assigned at least the supervisorpassword (see "Security functions", Page 68).Enabling TPM• Requirement: You have assigned a supervisor password, see "Security functions", Page 68.►Call up the BIOS Setup and select the Security menu.►Mark the TPM Security Chip Setting field and press the Enter key.►Select Enabled to activate the TPM.Once you have activated the TPM the Clear Security Chip option appears.Select Clear Security Chip to delete the holder in the TPM. By clicking on Enabled,all secret keys (e.g. SRK - Storage Root Keys, AIK - Attestation Identity Keysetc.) generated by applications are deleted.Please note that you will then no longer be able to access the data you haveencrypted with the keys based on that holder.►Select the Exit Saving Changes option in the Exit menu.►Press the Enter key and select Yes.The notebook will restart, and TPM will be enabled after the reboot.Disabling TPM• Requirement: You have assigned a supervisor password, see "Security functions", Page 68.►Call up the BIOS Setup and select the Security menu.►Mark the TPM Security Chip Setting field and press the Enter key.►Select Disabled to deactivate the TPM.►From the Exit menu, choose the option Exit Saving Changes.►Press the Enter key and select Yes.Your notebook will now restart and TPM will be disabled.74 Fujitsu
Connecting external devicesConnecting external devicesAlways refer to the safety information provided in "Important notes", Page 12 beforeconnecting or disconnecting any devices to or from your notebook.Always read the documentation supplied with the device you wish to connect.Never connect or disconnect cables during a thunderstorm.Never pull at a cable when disconnecting it. Always grasp the plug.Follow the steps below in order, when connecting or disconnectingdevices to your notebook:With some devices such as USB devices, it is not necessary to switch offthe notebook and the device before connecting/disconnecting. For moreinformation about whether or not devices need to be switched off, please referto the documentation supplied with the external device.Some of the external devices require special drivers (see the operatingsystem and external device documentation).Connecting devices to the notebook1. Turn off your notebook and all external devices.2. Unplug your notebook and all devices from the mains sockets.3. Connect the cables for your external devices following the instructions.4. Plug all power cables into the mains sockets.DevicesPeripher aldevicesDisconnecting devices from the notebook1. Turn off your notebook and all external devices.2. Unplug your notebook and all devices from the mains sockets.3. Disconnect the cables for your external devices following the instructions.DevicesPeripher aldevicesFujitsu 75
Connecting external devicesConnecting an external monitorThe Port Replicator, available as an option for your notebook, offersyou a DVI port and a DisplayPort.An analogue monitor is connected to the analogue VGA monitor port, a digital monitor to theDVI-I monitor port of the port replicator. Screen output is limited to a maximum of two screensat any one time (see "Key combinations", Page 40, section "Toggle output screen").MonitorVGAcon nectionsocketScreenportMonitorportDigital DVI monitor port Analogue VGA monitor port►Switch off the notebook and the external monitor.►Plug the data cable of the external monitor into the monitor port.►First switch on the external monitor and then the notebook.You can also switch back and forth between the external monitor and the notebook’sLCD monitor, see chapter "Key combinations", Page 40.You can display the same picture on the external monitor and thenotebook LCD screen simultaneously.76 Fujitsu
Connecting external devicesConnecting an external monitor to the DisplayPortIt is possible to connect a digital monitor to the DisplayPort on the port replicator.Screen output is limited to a maximum of two screens at any one time (see "Keycombinations", Page 40, section "Toggle output screen").Digital DisplayPort►Switch off the notebook and the external monitor.►Plug the data cable of the external monitor into the monitor port.►First switch on the external monitor and then the notebook.You can also switch between the external monitor and the LCD monitor of thenotebook, see chapter "Key combinations", Page 40.You can display the same picture on the external monitor and thenotebook LCD monitor simultaneously.Fujitsu 77
Connecting external devicesHDMI portHDMIportThe HDMI port on your notebook can be used to connect an external amplifier,LCD TV or a plasma TV with an HDMI connection.►Connect the data cable to theexternal device.►Connect the data cable to the HDMIport of the notebook.Some LCD televisions have only two loudspeaker connections and thereforecannot reproduce Dolby digital or DTS. In order to reproduce the sound, youmust go into Windows and adjust the sound settings.Proceed as follows:►Select Startsymbol – (Settings) – Control Panel – Hardware and Sound – Sound.►Mark Realtek HDMI Output.►Select Properties – Supported formats.►Deactivate the settings DTS audio and Dolby digital.►Confirm the settings with OK.78 Fujitsu
Connecting external devicesConnecting USB devicesUSBportsOn the USB ports, you can connect external devices that also have a USB port(e.g. a DVD drive, a printer, a scanner or a modem).USB devices are hot-pluggable. This means you can connect and disconnectdevices while your operating system is running.USB 1.x has a maximum data transfer rate of 12 Mbit/s.USB 2.0 has a data transfer rate of up to 480 Mbit/s.USB 3.0 has a data transfer rate of up to 5 Gbit/s.Additional information can be found in the documentation for the USB devices.►Connect the data cable to theexternal device.►Connect the data cable to a USBport of the notebook.Device driversUSB devices will be automatically recognised and installed by your operating system.Fujitsu 79
Connecting external devicesUSB port with charging function (Anytime USB charge)USBchargingfunctionIt is recommended that the notebook be operated with the power supply connectedwhenever the USB port with charging function is in use, as this function will drainthe battery more quickly if an external USB device is being charged.The power supply unit must already be connected when the notebook isswitched off, as otherwise the USB charging function will be disabled andthe connected USB devices will not be charged.Some USB devices (e.g. mobile telephones) require a driver in order to utilise theUSB charging function. In this case the USB charging function will not work when thenotebook is switched off, as no drivers are active when the notebook is switched off.You can use this USB port to charge or supply power to a USB device (e.g. to charge a PDAor a mobile phone or to connect a USB lamp), even if the notebook is switched off.How to remove USB devices correctlyAlways correctly remove the device according to the rules described below,to ensure that none of your data is lost.►Left click on the icon to safely remove hardware, located in the taskbar.►Select the device which you want to shut down and remove.►Press the Enter key.Wait for the dialogue box which tells you that it is now safe to remove the device.80 Fujitsu
Connecting external devicesConnecting external audio devicesMicrophone port/Line InAudiodevices, connectingAudioportsMicrophone ,connectingThe microphone port/Line In allows you to connect an external microphone, a MiniDiscplayer, MP3 player, CD player or a tape deck to your notebook.►Connect the audio cable to theexternal device.►Connect the audio cable to the microphoneport/Line In of the notebook.Headphone portConnectingaudio devicesAudioportsConnecting headphonesYou can connect headphones or external loudspeakers to your notebook via the headphone port.►Connect the audio cable to theexternal device.►Connect the audio cable to the headphoneport of the notebook.The internal loudspeakers are disabled.If you purchase a cable from a retailer, please note the following information:The headphone port on your notebook is a "3.5 mm jack socket".If you want to connect headphones or a speaker you will need a "3.5 mm jack plug".Fujitsu 81
Removing and installing components during servicingRemoving and installing componentsduring servicingOnly qualified technicians should repair your notebook. Unauthorisedopening or incorrect repair may greatly endanger the user (electric shock,fire risk) and will invalidate your warranty.ComponentsServ icingAfter consulting the Hotline/Service Desk, you may remove and install thecomponents described in this chapter yourself.If you remove and install components without consulting the Hotline/ServiceDesk, then the warranty of your notebook will be voided.Notes on installing and removing boardsand components• Switch the notebook off and pull the power plug out of the mains socket.• Always remove the battery.• Take care when you use the locking mechanisms on the battery and any other component.• Never use sharp objects such as screwdrivers, scissors or knives as leverage to remove covers.NotesBoardESD Boards with electrostatic sensitive devices (ESD) are marked with the labelshown.When handling boards fitted with ESDs, you must always observe the followingpoints:• You must always discharge static build up (e.g. by touching a groundedobject) before working.• The equipment and tools you use must be free of static charges.• Remove the power plug from the mains supply before inserting or removingboards containing ESDs.• Always hold boards with ESDs by their edges.• Never touch pins or conductors on boards fitted with ESDs.82 Fujitsu
Removing and installing components during servicingPreparing to remove componentsIf you are going to remove or change system components, prepare for the removal as follows:Please observe the safety information in chapter "Important notes", Page 12.Remove the power plug from the mains outlet !►Switch the device off.The device must not be in energy-saving mode !►Close the LCD screen.►Remove all the cables from the device.►Turn the device over and place it on a stable, flat and clean surface. If necessary, lay ananti-slip cloth on this surface to prevent the device from being scratched.►Remove the battery (see "Removing the battery", Page 46).Installing and removing memory expansionMemorymoduleMainmemoryRemovingmemorySystemexpansi onSystemexpansi onIf you are asked by the Hotline/Service Desk to remove and install the memoryexpansion yourself, proceed as follows:Please observe the safety information in chapter "Important notes", Page 12.When installing/removing memory modules, the battery must be removed fromthe notebook and the notebook must not be connected to the power supply,see "Preparing to remove components", Page 83.Only use memory expansion modules that have been approved for yournotebook (see "Technical data", Page 99).Never use force when installing or removing a memory extension.Make sure that foreign objects do not fall into the memory extension compartment.You must open the service compartment to remove or install a memory module. On some devices,opening the compartment may expose other components. These components should be removedand replaced only by authorised specialists. Therefore, be sure to observe the following:Individual components can become very hot during operation. Therefore, werecommend that you wait one hour after switching off the notebook before removingor installing memory modules. Otherwise, there is a risk of suffering burns!As some components are exposed that are sensitive to static electricity, please takenote of chapter "Notes on installing and removing boards and components", Page 82.Fujitsu 83
Removing and installing components during servicingRemoving a cover21►Remove the screw (1).►Pull off the cover from the notebook in the direction of the arrow (2).Removing memory modules3211►Carefully push the two mountingclips outwards (1).MemoryexpansionMemorymoduleThe memory module snaps upwards (2).►Pull the memory module out of its slotin the direction of the arrow (3).84 Fujitsu
Removing and installing components during servicingInstalling a memory module2a12►Insert the memory module with the contactsand the recess (a) facing the slot (1).MemoryexpansionMemorymodule►Carefully push the memory moduledownwards until you feel it clickinto place (2).Attaching the cover12►Place the cover into position, following the direction of the arrow (1).►Fasten the cover with the screw (2).►Install the battery again (see "Removing and installing the battery", Page 46).►Turn the notebook the right way up again and place it on a flat surface.►Reconnect the cables that were previously disconnected.Fujitsu 85
Removing and installing components during servicingRemoving and installing the harddiskRemoving a cover132►Remove the screw (1).Keep the screw in a safe place. If you are removing more than one component atthe same time, store the screws for the individual components separate from eachother. If you install the wrong screws, components may be damaged.►Slide the cover in direction of the arrow (2).►Lift the cover off the notebook (3).86 Fujitsu
Removing and installing components during servicingRemoving a hard disk21►To release the hard disk from the contacts, pull it in the direction of the arrow (1).►Remove the hard disk from the hard disk compartment (2).Fujitsu 87
Removing and installing components during servicingInstalling a hard disk12►Place the hard disk into the hard disk compartment (1).►Push the hard disk in the direction of the arrow (2) until the contacts of the hard disk engage.88 Fujitsu
Removing and installing components during servicingAttaching the cover312►Place the cover in the correct mounting position (1).►Slide the cover in the direction of the arrow (2).►Tighten the screw (3).Finishing component removalAfter you have removed or changed the system components as you required, pleaseprepare your device for operation again as follows:►Install the battery again (see "Inserting battery", Page 47).►Turn the notebook the right way up again and place it on a flat surface.►Reconnect the cables that you disconnected before.Fujitsu 89
Settings in BIOS Setup UtilitySettings in BIOS Setup UtilityBIOSSetupUtilitySystemsettings,BIOSSe tupUtilityConfiguration,BIOSSetupUtilitySetupSystemconfigurationHardwareconfigurati onThe BIOS Setup Utility allows you to set the system functions and the hardwareconfiguration for the notebook.When it is delivered, the notebook is set to factory default settings. You canchange these settings in BIOS Setup Utility. Any changes you make take effect assoon as you save and exit the BIOS Setup Utility.The BIOS Setup Utility program contains the following menus:About Displays information relating to the BIOS, processor and notebookSystem Advanced system settingsAdvanced Configuration of various hardware components, such as mouse, keyboard,processorSecurity Password settings and security functionsBoot Configuration of the start-up sequenceExit Exits the BIOS Setup UtilityStarting the BIOS Setup Utility►Reboot the device (switch off/on or reboot the operating system).BIOSSetupUtilityThe following or a similar display appears on the screen at start-up:<F2> BIOS Setup <F12> Boot Menu►Press the function key F2 .►If a password has been assigned, enter the password and press the Enter key.If you have forgotten the password, contact your system administratoror contact our customer service centre.The BIOS Setup Utility starts.Operating BIOS Setup UtilityBIOSSetupUtilityPress the F1 key to display help on the operation of the BIOS Setup Utility. The descriptionof the individual settings is shown in the right-hand window of the BIOS Setup Utility.With the F9 key you can load the default settings of the BIOS Setup Utility.►Use the cursor keys ←or →to select the menu you wish to access to make changes.The menu is displayed on the screen.►Select the option you want to change with the cursor keys ↑or ↓.►Press the Enter key.►Press the ESC key to exit the selected menu.►For future reference, make a note of the changes you have made (for example, in this manual).90 Fujitsu
Settings in BIOS Setup UtilityExiting BIOS Setup UtilityBIOSSetupUtilityYou need to select the desired option in the Exit menu and activate it by pressing the Enter key:Exit Saving Changes - save changes and exit BIOS Setup Utility►To save the current menu settings and exit the BIOS Setup Utility,selectExit Saving Changes and Yes.The notebook is rebooted and the new settings come into effect.Exit Discarding Changes – Discard changes andexit BIOS Setup Utility►To discard the changes, select Exit Discarding Changes and Yes.The settings in place when BIOS Setup Utility was called remain effective. BIOSSetup Utility is terminated and the notebook is rebooted.Load Setup Defaults – Copy Standard Entries►To copy the standard entries for all menus of the BIOS Setup Utility,choose Load Setup Defaults and Yes.Discard Changes – Discard changes without exitingthe BIOS Setup Utility►To discard the changes you have made, select Discard Changes and Yes.ThesettingsinplacewhenBIOS Setup Utility was called remain effective.You can now make additional settings in the BIOS Setup Utility.►If you want to exitBIOS Setup Utilitywith these settings, select Exit Saving Changes and Yes.Save Changes - save changes without exitingthe BIOS Setup Utility►To save the changes, select Save Changes and Yes.The changes are saved. You can now make additional settings in the BIOS Setup Utility.►If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes.Save Changes and Power Off►To save the changes and switch off your device, select Save Changes and Power Off and Yes.The changes are saved. Your device is shut down.Fujitsu 91
Troubleshooting and tipsTroubleshooting and tipsTroubleshootingTipsFaultTroubleshoo tingFollow the safety notes in the "Safety/Regulations" manual whenconnecting or disconnecting cables.If a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows:►Make a note of the steps and the circumstances that led to the fault. Alsomake a note of any error messages displayed.►Switch the notebook off.►Please contact the Hotline/Service Desk.You can find the telephone numbers in the service desk list. Please havethe following information ready when you call:• The model name and serial number of the notebook. The serial number islocated on a sticker on the underside of the notebook.• Notes of any messages that appear on the screen and information on acoustic signals.• Any changes you have made to the hardware or software sincereceiving the notebook.• Any changes you have made to the BIOS Setup settings since receiving the notebook.• Your system configuration and all peripheral devices connected to your system.• Your sales contract.Our notebooks have been designed primarily with mobile applications in mind. Thismeans that considerable effort has been made to optimise components and equipmentin terms of weight, space and energy requirements. Depending on the particularconfiguration you have purchased, it is possible that functionality may be slightly reducedcompared to a desktop PC if you are running processor-intensive gaming software, e.g.games with intensive 3D graphics. Updating your hardware with drivers which have notbeen approved by Fujitsu Technology Solutions may result in performance losses, datalosses or malfunction of the equipment. A list of approved drivers and current BIOSversions can be downloaded from: "http://support.ts.fujitsu.com/Download/Index.asp"Help if problems occurShould you encounter a problem with your computer that you cannot resolve yourself:►Note the ID number of your device. The ID number is found on the type ratingplate on the back or underside of the casing.►For further clarification of the problem, contact the Service Desk for your country (see theService Desk list or visit the Internet at"http://support.ts.fujitsu.com/contact/servicedesk/ServiceDeskNumber_Int.asp"). When youdo this, please have ready the ID number and serial number of your system.92 Fujitsu
Troubleshooting and tipsThe notebook’s date or time is incorrectSummertimeTime,daylightsavingsTime notcorrectTime notcorrectIn correc tdate /timeDateisincorrectBufferbattery,loadCause TroubleshootingTime and date are incorrect. ►With the BIOS-Setup-Utility,you can set thedate and time in the main menu.If the time and date are still set incorrectly afterswitching on the notebook.►Please contact your sales outlet or ourHotline/Service Desk.Battery indicator does not illuminateCause Fault eliminationThe battery is not installed correctly. ►Switch the notebook off.►Check whether the battery is installedcorrectly in its compartment.►Switch the notebook on.The battery is fully discharged. ►Charge the battery.or►Install a charged battery.or►Connect the notebook to a mains outletusing the mains adapter.When certain characters are entered on thekeyboard, only numerals are writtenAbeepsounds everys econdCause TroubleshootingThe virtual numeric keypad of your device isactivated, see "Virtual numeric keypad", Page 39►Press the Num key.The notebook’s LCD screen remains blankLCDscreenLCDscreenistoodarkCause TroubleshootingMonitor is switched off. ►Press a key or touch the touchpad.External monitor or television set connected. ►Press the key combination to switch thescreen output, see "Key combinations",Page 40.Fujitsu 93
Troubleshooting and tipsThe LCD screen is difficult to readLCDscreenLCDscreenCause TroubleshootingReflected glare ►Turn the notebook or alter the tilt of the LCDscreen.►Increase the brightness of the screen.The external monitor remains blankMonitorCause TroubleshootingMonitor is switched off. ►Switch the external monitor on.Power saving has been activated (monitor isblank).►Press any key to continue.Brightness is set to dark. ►Adjust the brightness of the monitor.Screen output is set to the notebook’s LCDscreen►Press the key combinationtoswitchthescreen output, see "Key combinations",Page 40.The external monitor’s power cable or datacable is not connected properly.►Switch off the external monitor and thenotebook.►Check whether the power cable is pluggedproperly into the external monitor and intothe power socket.►Check whether the data cable is properlyconnected to the notebook and the externalmonitor (if it is plugged in with a connector).►Switch on the external monitor and thenotebook.The external monitor is blank or the image is unstableScreenMonitorCause TroubleshootingThe wrong external monitor has been selectedor the wrong screen resolution has been set forthe application program.►Terminate the application program inWindows by pressing Alt +F4 .Ifthefault persists after closing the program, usethe key combination for switching the screenoutput (see "Key combinations", Page 40)toswitch over to the notebook’s LCD screen.Change the following setting:►Set the screen resolution: Set the screenresolution as described in the documentationforyouroperatingsystem.►Select monitor: Select monitor 1 or 2 asdescribed in the documentation for youroperating system.94 Fujitsu
Troubleshooting and tipsThe cursor does not correctly follow thepen movementsCause Fault eliminationPen incorrectly calibrated ►Calibrate the pen as shown under Hardwareand Sound / Tablet PC Settings in the ControlPanel, see "Setting the pen", Page 33 and"Calibrating the pen", Page 34.Pen input not workingCause TroubleshootingIncorrect driver installed. ►If your device is one which can only beoperated using the pen, install the driver forthe standard model.or►If your device is one which can beoperated using the pen and by finger,install the driver for the "Dual Digitizer"model.The notebook cannot be startedNotebookCause TroubleshootingThe battery is not installed correctly. ►Check whether the battery is installedcorrectly in its compartment.►Switch the notebook on.The battery is dead. ►Charge the battery.or►Insert a charged battery.or►Connect the mains adapter to thenotebook.The power adapter is not connected correctly. ►Check whether the mains adapter isconnected correctly to the notebook.►Switch the notebook on.Fujitsu 95
Troubleshooting and tipsThe notebook stops workingNotebookEnergys avingmodeCause TroubleshootingNotebook is in energy saving mode. ►Leave energy saving mode.An application programme has caused themalfunction.►Close the application program or restartthe notebook (by restarting the operatingsystem or switching the device off and backon again).The battery is dead. ►Charge the battery.or►Insert a charged battery.or►Connect the mains adapter to thenotebook.The printer does not printPrinterdoesnot printCause TroubleshootingThe printer is not switched on. ►Make sure that the printer is switchedon and ready for operation (refer to thedocumentation supplied with the printer).The printer is not connected correctly. ►Check that the data cable connectingthe notebook to the printer is properlyconnected.The printer driver is faulty or not correctlyinstalled, or it is the wrong printer driver.►Check that the data cable connectingthe notebook to the printer is properlyconnected.►Check whetherthecorrectprinterdriverisloaded (refer to the printer documentation).The radio connection to a network does not workTheradioconnect iontoane tworkdoes notworkCause TroubleshootingThe wireless component is disabled. ►Switch the radio component on (see"Switching the wireless components on andoff", Page 60).The wireless component is enabled. Despitethis, the wireless connection to a network doesnot work.►Check whether the radio connection isswitched on via the software.►Further information on using the radiocomponent can be found in the help files.96 Fujitsu
Troubleshooting and tipsThe battery discharges too quicklyBattery:Cause TroubleshootingThe battery is either too hot or too cold. In thiscase the battery indicator flashes.►Bring the notebook up/down to a normaltemperature again.►If the operating time of the battery life isextremely short, the battery is probably tooold. Replace battery if necessary.You may have an application running thatconsumes a great deal of power due to frequentaccessing of the hard disk or optical drive.►Use the mains adapter as frequently aspossible.The maximum brightness may have been setfor the screen.►Set the screen slightly darker with thekey combination for Decreasing the screenbrightness in order to reduce the amount ofpower being drawn.Acoustic warningsAcousticerror messagesErrorsCause TroubleshootingA beep sounds every few seconds.The battery is almost flat.►Charge the battery.Error messages on the screenErrormessagesont hescreenErrormessage:This section describes the error messages generated by the BIOS Setup. Error messages displayedby the operating system or programmes are described in the relevant documentation.If the error message appears repeatedly, despite troubleshooting measures, pleasecontact the place of purchase or our customer service centre.Error message/cause ResolutionCMOS battery badIf the error message occurs repeatedly, thebuffer battery in the notebook is flat.►Contact your sales outlet or our customerservice centre.System CMOS checksum bad - default configurationusedThe system configuration information isincorrect.►Switch the notebook off.►Switch the notebook on.►Press the function key F2 to access theBIOS Setup.►In the BIOS Setup, select the Exit menu.►Select the entry Load Setup Defaults.►Select OK and press the Enter key.Fujitsu 97
Troubleshooting and tipsError message/cause ResolutionExtended memory failed at offset: xxxx Failing Bits:zzzz zzzzWhen testing the extended memory an error hasresulted at the address xxxx.►Check whether the additional memorymodule has been inserted correctly.Failure Fixed Disk nThe settings of the hard disk drive are incorrect.►Start the BIOS Setup (Primary Mastersubmenu) and select the correct settings.Keyboard controller error ►Switch the notebook off with the ON/OFFswitch.►Wait 3 - 5 seconds and switch on thenotebook again.Keyboard error If you are using an external keyboard:►Check the connection and reboot thenotebook.nn Stuck key ►Make sure that no key is pressed.Operating system not found ►Check in the BIOS Setup whether your harddisk has been set correctly.►Make sure that the operating system isinstalled on the corresponding drive.Press <F1> to resume, <F2> to SETUPThis error message appears if an error occursduring the self-test before starting the operatingsystem.►Press the F1 function key to start theoperating system.►Press the function key F2 to access theBIOS Setup.Previous boot incomplete - Default configurationused Due to an error during the previous systemboot, default values were used for certainsettings. Check the settings in the BIOS Setup.►Press the F1 function key when promptedto do so.Real time clock error ►Contact your sales outlet or our customerservice centre.nnnnK Shadow RAM failed at offset: xxxx FailingBits: zzzz ►Contact your sales outlet or our customerservice centre.System battery is dead - Replace and run SETUP ►Contact your sales outlet or our customerservice centre.System cache error - Cache disabled ►Contact your sales outlet or our customerservice centre.System timer error ►Contact your sales outlet or our customerservice centre.98 Fujitsu
Technical dataTechnical dataNotebookGeneralProcessor 3rd Generation Intel® Core™ with vPro™technologyMain memory (SO DIMM) Maximum 16 Gbyte DDR32 slots for 2 Gbyte, 4 Gbyte or 8 Gbyte modulesElectrical dataSafety regulations complied with CEProtection class IIMaximum power draw (when the notebook isswitched on and the battery is charged): 80 W (with and without connected port replicator)LCD screenSize 31.75 cm / 12.5" TFT HDResolution 1366 x 768 (HD), 16 mio. colorsPixel class IIBrightness control 12 levelsTechnology Wide-View High-Bright WXGA Display with LEDBackground LightingDigitizer and glass panel • Dual Digitizer• Matter Touchscreen• Toughened glassWebCam Full-HD camera (1080 p), with status indicatorGraphics cardChip Intel® HD Graphics 4000Maximum resolution on external display: 1920 x 1200 subpixels, 16 mio. colorson port replicator:• VGA: 1920 x 1200 subpixels• DVI: 1920 x 1200 subpixels• DisplayPort: 2560 x 1600 subpixelsDimensionsWidth x depth x height 315.6 mm x 233 mm x 37.5-33.5 mm with rubberfeetWeight depending on configuration from 1.8 kgInput devicesKeyboard 85 buttons, splash-protectedTouchpad 2 keysTablet buttons 5 buttons + 1 Windows buttonPen 1 freely programmable rocker button / eraserFujitsu 99
Technical dataSlotsMemory card slot 1xSDCardExpressCard slot 1 x ExpressCard/54SIM card slot 1xPortsMonitor port (analogue) 15-pin socketHDMI port 1 xLAN port Socket, RJ45Microphone port/Line In 3.5mmstereominijackHeadphones port/Line Out 3.5mmstereominijackDocking port 100-pin socketUSB (Universal Serial Bus) Total: 3 x USB (1 x USB 3.0 with chargingfunction (Anytime USB charge), 2 x USB 2.0)Security Lock 1xAmbient conditionsEnvironment class DIN IEC 721 7K1Mechanism class DIN IEC 721 7M2Operating temperature 5℃.... 35℃Transport temperature (2K2) –15°C .... 60°CPort Replicator (optional)Electrical dataSafety regulations complied with CEProtection class IIPortsMonitor port (analogue) 15-pinMonitor port (digital) 25-pin, DVI-DDisplayPort 1 xLAN port RJ45USB (Universal Serial Bus) 4 x USB 3.0Audio Headphone portDocking port 100-pinSecurity Lock 1xAmbient conditionsEnvironment class DIN IEC 721 7K1Mechanism class DIN IEC 721 7M2Operating temperature 5 °C .... 35℃Transport temperature –15 °C .... 60 ℃100 Fujitsu
Technical dataRechargeable batteryYou will find information on the batteries used in your device on theInternet at "http://www.fujitsu.com/fts/support/".In addition to the main battery, you can order an optional battery which is inserted in the module slot.All rechargeable batteries are 6-cell batteries.Main batteryOptional battery(to be inserted inthe module bay)Rated voltage 10.8 V 10.8 VRated capacity 72.4 Wh 28.1 WhNominal power 6700 mAh 2600 mAhThe operating time depends on the device configuration, the activeapplications and the energy-saving settings.Mains adapter for use with the notebookand port replicatorThe following technical data applies to the mains adapter supplied with thenotebook and to the port replicator which you can order optionally.PrimaryRated voltage 100 V to 240 V (automatic)Rated frequency 50 Hz to 60 Hz (automatic)Max. rated current 0.7 A to 1.2 ASecondaryNominal power 80 WRated voltage 19 VMax. rated current 4.22 AAn additional mains adapter or power cable can be ordered at any time.Fujitsu 101
Manufacturer’s notesManufacturer’s notesDisposal and recyclingNotesInformation about this subject can be found on your notebook or on our Internet pages.Declarations of ConformityDeclarationof conformityThe "Declarations of Conformity" for the device can be found on the Internet at:"http://globalsp.ts.fujitsu.com/sites/certificates/default.aspx".Fujitsu Technology Solutions hereby declares that your device is in compliance with theessential requirements and other relevant provisions of Directive 1999/5/EC.CE markingCEmarkingCE marking for devices with radio componentThis equipment complies with the requirements of Directive 1999/5/EC of the EuropeanParliament and Commission from 9 March, 1999 governing Radio and TelecommunicationsEquipment and mutual recognition of conformity.This equipment can be used in the following countries:Belgium Bulgaria Denmark GermanyEstonia Finland France GreeceUK Ireland Iceland ItalyLatvia Liechtenstein Lithuania LuxembourgMalta The Netherlands Norway AustriaPoland Portugal Rumania SwedenSwitzerland Slovakia Slovenia SpainCzech Republic Hungary CyprusContact the corresponding government office in the respective country for current information onpossible operating restrictions. If your country is not included in the list, then please contact thecorresponding supervisory authority as to whether the use of this product is permitted in your country.Regulatory notices102 Fujitsu
103 - Regulatory InformationRegulatory InformationNoticeChanges or modifications not expressly approved by Fujitsu could void this user’s authority to operate the equipment.FCC NOTICESNotice to Users of Radios and Television This equipment has been tested and found to comply with the limit for class B digital devices, pursuant to parts 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet that is on a different circuit than the receiver.•Consult the dealer or an experienced radio/TV technician for help.Shielded interconnect cables must be employed with this equipment to ensure compliance with the pertinent RF emission limits governing this device. DOC (INDUSTRY CANADA) NOTICESNotice to Users of Radios and Television This Class B digital apparatus meets all requirements of Canadian Interference-Causing Equipment Regulations.CET appareil numérique de la class B respecte toutes les exigence du Réglement sur le matérial brouilleur du Canada.
104    Appendix A: WLAN User’s Guide FCC Regulatory InformationPlease note the following regulatory information related to the optional wireless LAN device.Regulatory Notes and StatementsWireless LAN, Health and Authorization for use  Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions, however, are far much less than the electromagnetic energy emissions from wireless devices such as mobile phones. Wireless LAN devices are safe for use by consumers because they operate within the guidelines found in radio frequency safety standards and recommendations. The use of Wireless LAN devices may be restricted in some situations or environments, such as:•On board an airplane, or•In an explosive environment, or•In situations where the interference risk to other devices or services is perceived or identified as harmful.In cases in which the policy regarding use of Wireless LAN devices in specific environments is not clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain authorization to use these devices prior to operating the equipment.Regulatory Information/Disclaimers Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, or the substitution or attachment of connecting cables and equipment other than those specified by the manufacturer. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attachment. The manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failure to comply with these guidelines.
105 This device must not be co-located or operated in conjunction with any other antenna or transmitter.For IEEE 802.11a Wireless LAN: For operation within 5.15~5.25 GHz frequency range, it is restricted to indoor environments, and the antenna of this device must be integral.Federal Communications Commission and Industry Canada statement This device complies with Part 15 of FCC Rules  and Industry Canada license-exempt RSS standard(s)..Operation is subject to the following two conditions: (1) This device may not cause interference, and, (2) This device must accept any interference, including interference that may cause undesired operation of this device.FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:1Reorient or relocate the receiving antenna.2Increase the distance between the equipment and the receiver.3Connect the equipment to an outlet on a circuit different from the one the receiver is connected to.4Consult the dealer or an experienced radio/TV technician for help.FCC Radio Frequency Exposure statement The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposure have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. The wireless LAN radio device has been tested and found to comply with FCC radiation exposure limits set forth for an uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65.Figure A-1. Ad Hoc Mode Network
106 - Export restrictions This product or software contains encryption code which may not be exported or transferred from the US or Canada without an approved US Department of Commerce export license. This device complies with Part 15 of FCC Rules., as well as ICES 003 B / NMB 003 B. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Modifications not expressly authorized by Fujitsu America, Inc. may invalidate the user's right to operate this equipment.Canadian Notice The device for the 5150 - 5250 MHz band is only for indoor usage to reduce the potential for harmful interference to co-channel mobile satellite systems.The maximum antenna gain of 6 dBi permitted (for devices in the 5250 - 5350 MHz, 5470 - 5725 MHz and 5725 - 5825 MHz bands) to comply with the e.i.r.p. limit as stated in A9.2 of RSS210.In addition, users are cautioned to take note that high power radars are allocated as primary users (meaning they have priority) of 5250 - 5350 MHz and 5650 - 5850 MHz and these radars could cause interference and/or damage to LE-LAN devices.
107- Before Using the Optional Wireless LANBefore Using the Optional Wireless LANThis manual describes the procedures required to properly set up and configure the optional integrated Wireless LAN Mini-PCI device (referred to as "WLAN device" in the rest of the manual). Before using the WLAN device, read this manual carefully to ensure its correct operation. Keep this manual in a safe place for future reference.Wireless LAN Device Covered by this DocumentThis document is applicable to systems containing one of the following optional devices:•Integrated Intel Centrino Advanced-N 6205 (802.11a/b/g/n)•Atheros XSPAN 802.11abgnCharacteristics of the WLAN Device•The WLAN device is a Mini-PCI card attached to the main board of the mobile computer. •The WLAN device operates in license-free RF bands, eliminating the need to procure an FCC operating license. The WLAN operates in the 2.4GHz Industrial, Scientific, and Medical (ISM) RF band and the lower, middle, and upper bands of the 5GHz Unlicensed National Information Infrastructure (UNII) bands. •The WLAN devices are capable of four operating modes, IEEE802.11a, IEEE802.11b, IEEE802.11g, and IEEE802.11n•The WLAN devices are Wi-Fi certified and operate (as applicable) at a the maximum data rate of 450 Mbps (theoretical) in IEEE802.11n mode; 54 Mbps in IEEE802.11a or IEEE802.11g mode; and 11 Mbps in IEEE802.11b mode.•The WLAN devices support the following encryption methods - WEP, TKIP, CKIP, and AES encryption.•The Wireless LAN devices are compliant with the following standards: WPA, WPA2, CCX1.0, CCX2.0, CCX3.0, and CCX4.0.
108- Before Using the Optional Wireless LANWireless LAN Modes Using this DeviceAd Hoc Mode "Ad Hoc Mode" refers to a wireless network architecture where wireless network connectivity between multiple computers is established without a central wireless network device, typically known as Access Point(s). Connectivity is accomplished using only client devices in a peer-to-peer fashion. That is why Ad Hoc networks are also known as peer-to-peer networks. Ad Hoc networks are an easy and inexpensive method for establishing network connectivity between multiple computers. Ad Hoc mode requires that the SSID, network authentication, and encryption key settings are identically configured on all computers in the Ad Hoc network.Figure 49.  Ad Hoc Mode Network
109 Before Using the Optional Wireless LANAccess Point (Infrastructure) Mode  Infrastructure mode refers to a wireless network architecture in which devices communicate with wireless or wired network devices by communicating through an Access Point. In infrastructure mode, wireless devices can communicate with each other or with a wired network. Corporate wireless networks operate in infrastructure mode because they require access to the WLAN in order to access services, devices, and computers (e.g., file servers, printers, databases).Figure 50.  Access Point (Infrastructure) Mode NetworkADSL modem,cable modem,or similarInternet Wired LANAccess Point*Wireless LAN *An optional hub for a wiredLAN may be required dependingupon the type of access point used.
110 - Before Using the Optional Wireless LANHow to Handle This Device The WLAN device is an optional device that may come pre-installed in your mobile computer. Under normal circumstances, it should not be necessary for you to remove or re-install it. The operating system that your mobile computer comes with has been pre-configured to support the WLAN device. •The Wireless LAN devices support IEEE802.11a, IEEE802.11b, IEEE802.11g, and IEEE802.11n.•The WLAN devices operate in the 2.4 GHz ISM band and the 5 GHz lower, middle, and upper UNII bands.•Microwave ovens may interfere with the operation of WLAN devices since they operate in the same 2.4 GHz frequency range as IEEE802.11b/g/n devices. Interference by microwaves does not occur with IEEE802.11a radio which operates in the 5 GHz RF band.•Wireless devices that transmit in the 2.4 GHz range may interfere with operation of WLAN devices in IEEE802.11b/g/n modes. Symptoms of interference include reduced throughput, intermittent disconnects, and many frame errors. It is HIGHLY recommended that these interfering devices be powered off to ensure proper operation of the WLAN device.Deactivating/Disconnecting the WLAN DeviceDisconnecting the WLAN device may be desired in certain circumstances (to extend battery life) or where certain environments require it (i.e. hospitals, clinics, airplanes, etc.). The WLAN device can be deactivated by using the Wireless On/Off Switch, and it can be disconnected in Windows using the WLAN icon in the system tray (Note that disconnecting via the icon in the system tray does not turn off the radio; it continues to transmit and receive even though it’s not connected.).
111- Before Using the Optional Wireless LANDeactivation Using the Wireless On/Off SwitchThe WLAN device can be deactivated quickly and efficiently by toggling the Wireless Device On/Off Switch to the Off position. The switch has no effect on non-Wireless LAN models.Figure 51.  Wireless Device On/Off Switch LocationDisconnection Using the Icon in the TaskbarNote that disconnecting via the icon in the system tray does not turn off the radio; it continues to transmit and receive even though it’s not connected.1Right-click the WLAN icon in the taskbar at the bottom right of your screen.2Choose Disconnect from a network.Activating the WLAN DeviceActivation of the WLAN device can be accomplished using the same methods as the deactivation process•Using the Wireless On/Off Switch•In Windows, by right-clicking the WLAN icon then clicking “Connect to a network”Wireless Device Switch
112- Configuring the Wireless LANConfiguring the Wireless LANThe optional WLAN device can be configured to establish wireless network connectivity using the software that is built into Windows. Support for most industry standard security solutions is contained in this software.Pre-defined parameters will be required for this procedure. Please consult with your network administrator for these parameters:Configuring the WLAN1Click the Start button, then select Control Panel. (If you are in Windows Vista and the Control Panel is not in Classic View, select Classic View from the left panel.)2Double-click the Network and Sharing Center icon.3Select “Manage wireless networks” from the left panel.4Click on the [Add] button.5Depending upon what type of connection you would like to make, make a selection. For an infrastructure network, select “Manually create a network profile. For ad hoc network, select “Create an ad hoc network”.6Enter the required information. If necessary, consult with your network administrator for some of the information.7In the event you require assistance, go to the Network and Sharing Center window (Start -> Control Panel -> Network and Sharing Center), and type in relevant keywords in the Search box. Connecting to a Network After you have configured your computer, you can connect to an active network by performing the following steps:1Click on the WLAN icon in the system tray.2Select “Connect to a network”.3Select a network from the list that appears, and click the [Connect] button.Connection to the networkAfter you have configured your computer, you can connect to an active network by clicking on the Wireless Network icon in the system tray:
113 Troubleshooting the WLANTroubleshooting the WLANTroubleshootingCauses and countermeasures for troubles you may encounter while using your wireless LAN are described in the following table. If you are unfamiliar with the steps required, consult your System Administrator or go to [Start] -> Help and Support -> Networking and the WebProblem Possible Cause Possible SolutionUnavailable network  connectionIncorrect network name (SSID) or network keyAd hoc connection: verify that the network names (SSID’s) and network keys (WEP) of all computers to be connected have been configured correctly. SSID’s and WEP or WPA/WPA2 Pre-Shared key values must be identical on each machine.Access Point (Infrastructure) connection: set network name (SSID) and network key to the same values as those of the access point. Set the Network Authentication value identically to that of the Access Point. Please consult your network administrator for this value, if necessary. Weak received signal strength and/or link qualityAd hoc connection: Retry connection after shortening the distance to the destination computer or removing any obstacles for better sight.Access Point (Infrastructure) connection: Retry connection after shortening the distance to the access point or removing any obstacles for better transmission.The WLAN device has been deactivated or disabledCheck if the wireless switch is turned On. Go to Start -> Control Panel, and double-click on Windows Mobility Center. If the wireless network is off, click the [Turn wireless on] button. The computer to be connected is turned offCheck if the computer to be connected is turned ON.
114- Troubleshooting the WLANUnavailable network  connection(continued)RF interference from Access Points or other wireless networksThe use of identical or overlapping RF channels can cause interference with the operation of the WLAN device. Change the channel of your Access Point to a channel that does not overlap with the interfering device.Wireless network authentication has failedRe-check your Network Authentication, Encryption, and Security settings. Incorrectly configured security settings such as an incorrectly typed WEP key, a misconfigured LEAP username/password, or an incorrectly chosen authentication method will cause the LAN device to associate but not authenticate to the wireless network.Incorrectly configured network settingsRecheck the configuration of your network settings.Incorrect IP address configurationThis only applies to networks using static IP addresses. Please contact your network administrator for the correct settings.Problem Possible Cause Possible Solution
115 WLAN SpecificationsWLAN SpecificationsSpecifications*    “Wi-Fi based” indicates that the interconnectivity test of the organization which guarantees the interconnectivity of wireless LAN (Wi-Fi Alliance) has been passed.**  The communication ranges shown above will increase or decrease depending on factors such as number of walls, reflective material, or interference from external RF sources.*** Encryption with network key (WEP) is performed using the above number of bits, however, users can set 40 bits/   104 bits after subtracting the fixed length of 24 bits.****  Depending on practical environments, the allowable number of computers to be connected may be decreased.Item SpecificationType of network  The integrated Intel Centrino Advanced-N 6205 (802.11abgn 2x2) and Atheros XSPAN 802.11a/b/g/n WLAN devices conform to IEEE 802.11a, 802.11b/g, and 802.11n, Wi-Fi based*.Transfer rate (Automatic switching) 54 Mbps maximum data rate (IEEE802.11n to be determined)Active frequency •802.11n: 2.4 GHz or 5 GHz•802.11b/g: 2400~2473 MHz •802.11a: 4900 ~ 5850 MHzTypical operating distances** •802.11a: 40 ft. (12 m) @ 54 Mbps; 300 ft. (91 m) @ 6 Mbps•802.11b: 100 ft. (30 m) @ 11 Mbps; 300 ft. (91 m) @ 1 Mbps•802.11g: 100 ft. (30 m) @ 54 Mbps; 300 ft. (91 m) @ 1 Mbps•802.11n: Estimated double the operating distance of 802.11g and 802.11a in their respective frequencies.Number of channels •802.11a: 8 independent channels•802.11b/g: 11 channels, 3 non-overlapping channels •802.11n: 2.4 GHz - 3 non-overlapping channels when Channel Bonding is not used; 2 non-overlapping channels when Channel Bonding is used. 5 GHz - 12 non-overlapping UNII channels with or without Channel Bonding Security  Encryption Types - WEP, TKIP, AES***, CKIP, WPA 1.0 and WPA 2.0 compliantMaximum recommended number of computers to be connected over wireless LAN (during ad hoc connection)10 units or less ****
116 - Using the Bluetooth DeviceUsing the Bluetooth DeviceThe Integrated Bluetooth module is a wireless device installed in selected Fujitsu mobile computers. What is BluetoothBluetooth technology is designed as a short-range wireless link between mobile devices, such as laptop computers, phones, printers, and cameras. Bluetooth technology is used to create Personal Area Networks (PANs) between devices in short-range of each other. Where to Find Information About BluetoothThe Bluetooth module contains a robust Help user’s guide to assist you in learning about operation of the Bluetooth device.To access the Help file:1Click on the Bluetooth icon in notification area.2Select Open Settings. The "Bluetooth Settings" dialog will be opened.3Select the Share tab.4Click on  "Learn more about Bluetooth sharing" link. The Bluetooth User Guide will open. For additional information about Bluetooth Technology, visit the Bluetooth Web site at: www.bluetooth.com.SLIDING THE WIRELESS DEVICE SWITCH ON THE FRONT OF THE SYSTEM WILL TURN BOTH THE OPTIONAL WIRELESS LAN AND BLUETOOTH DEVICES ON AND OFF AT THE SAME TIME. TO ENABLE OR DISABLE BLUETOOTH INDIVIDUALLY, PERFORM THE FOLLOWING STEPS:•CLICK ON THE BLUETOOTH ICON IN THE SYSTEM NOTIFICATION AREA LOCATED IN THE LOWER RIGHT CORNER OF THE SCREEN.•SELECT TURN ADAPTER OFF.
117 - Using the Bluetooth DeviceFCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The Bluetooth antenna is exempt from minimum distance criteria due to its low power. The transmitters in this device must not be co-located or operated in conjunction with any other antenna or transmitter.Canadian Notice To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.Warranty Users are not authorized to modify this product. Any modifications invalidate the warranty.This equipment may not be modified, altered, or changed in any way without signed written permission from Fujitsu. Unauthorized modification will void the equipment authorization from the FCC and Industry Canada and the warranty.
IndexIndexAA beep sounds every second 93Acoustic error messages 97Anti-theft protection 69Audio devices, connecting 81Audio ports 81BBackspace 38Bass loudspeaker (subwoofer) 58Batterybattery life 45caring for and maintaining 45charge level 45, 54charging 45self-discharge 45storage 45Battery status meter 45Battery:discharges too quickly 97BIOS Setup Utilitycalling 90exiting 91operating 90protecting with password 70settings 90BluetoothSwitching off module 60Switching on module 60Bluetooth, safety notes 12Board 82Buffer battery, load 93Buttons 37CCaps Lock 38CD/DVD indicator 51CD/DVD:manual emergency removal 52CE marking 102Charging capacity, battery 45Cleaning 14Componentsinstalling / removing 82Configuration, BIOS Setup Utility 90Connecting audio devices 81Connecting headphones 81Crystal View displaycleaning 14Cursor control keys 38Cursor keys 38DDate is incorrect 93Declaration of conformity 102Devicesetting up 16Devicesconnecting 75disconnecting 75Display orientationselecting 24DOC (INDUSTRY CANADA) NOTICES 104DriveRemoving 49EEmergency removal of data carrier 52Energyenergy saving 13Energy saving 13Energy saving modeleaving 96Enter 38Enter key 38Error message:on the screen 97Error messages on the screen 97ErrorsAcoustic warnings 97ESD 82Ethernet LAN 62ExpressCard 56FFaultcorrection 92Fingerprint sensor 69configure 69First-time setup 15Fn + F10 41Fn key 38Fn+F3 40Fn+F4 40Fn+F6 40Fn+F7 40Fn+F8 40Fn+F9 40118 Fujitsu
IndexGGetting started 15HHandlingdata carriers 50Hardware configuration 90HDMI port 78IImportant notes 12Incorrect date/time 93Insertinga data carrier 51KKeyboard 37cleaning 14LLandscape orientationscreen 24LCD screencleaning 14difficult to read 94notes 28reduce brightness 40reflected glare 94remains blank 93LCD screen is too dark 93Life, battery 45Line feed 38Loudspeakerswitch off 40switch on 40Loudspeakers 58MMain memorysee Adding memory 83Mains adapterconnecting 16setting up 16Manual removal of data carrier 52Mechanical backup 69Memory cardhandling 55inserting 55removing 56Memory expansioninstalling 85removing 84Memory moduleimportant notes 83installing 85removing 84Microphone 58Microphone, connecting 81Mobile operation 13ModuleRemoving 49Module bay 49Modules 49Monitorconnecting 76drifting display 94remains blank 94Monitor portsee VGA connection socket 76NNotebookbefore you travel 13cannot be started 95cleaning 14stops working 96switching off 26transporting 13–14using 18Notebook, operation 18Notebook: switching on 21Notes 12boards 82cleaning 14disposal / recycling 102energy saving 13LCD screen 28Safety 12transport 13Num Lockindicator 39Numeric keypad 37see Virtual numeric keypad 39OOperating systemactivating system protection 71cancel system protection 71protecting with password 71Optical drive 50PPackaging 15Fujitsu                     119
IndexPasswordchanging 71entering 70removing 71Password protection 70Password protection:hard disk 72Peripheral devicesconnecting 75disconnecting 75Port ReplicatorPorts 63Portrait orientationscreen 24PortsPort Replicator 63Powerpower consumption 54power-management features 54Power-on indicator 21Preparing for operation 16Printer does not print 96RRadio component:safety notes 12Rechargeable battery 45see Battery 45Regulatory informationnotebooks with radio device 106Notebooks without radio device 103Removinga data carrier 51Removing memorysee Adding memory 83Return 38SSafety notes 12Screenno screen display 94Screen brightnessincrease 40reduce 40Screen portsee VGA connection socket 76Security functions 68Security Lock 69Selecting a location 16Self-discharge, battery 45Servicing 82Setupsee BIOS Setup Utility 90Shift 38Shift key 38Shift+Tab 41SlotExpressCard 56Memory cards 55Start key 38Status indicators 18Summer time 93Supervisor passwordchanging 71entering 70removing 71Suspend/Resume button 21Switchingonforthefirst time 17Symbolsindicators 18System configuration 90System expansion 83see Adding memory 83System settings, BIOS Setup Utility 90TTab back 41Tab key 38The radio connection to a network doesnot work 96Time not correct 93Time, daylight savings 93Tips 92Toggle output screen 41Touchpad 35, 40buttons 35cleaning 14dragging items 36executing commands 35moving the pointer 35selecting an item 35switch off 40Touchpad buttons 40TPM 74TransportTransport damage 15Transportation 13–14Travel, notebook 13Troubleshooting 92Trusted Platform Module 74UUMTS 61Antenna 61120 Fujitsu
IndexUSB charging function 80USB ports 79User passwordchanging 71entering 70removing 71Using the Kensington Lock Cable 69VVGA connection socket 76Virtual numeric keypad 39Volumedecrease 40increase 40Volume control 58WWebcam 44Weight SaverRemoving 49Wireless LANSwitching off module 60Switching on module 60Wireless LAN:safety notes 12Fujitsu 121

Navigation menu