Sierra Wireless MC8775-H Multi-Mode & Multi-Band Wireless Network MiniCard User Manual Regulatory Section

Download:
Mirror Download [FCC.gov]
Document ID	711193
Application ID	YdOtP0EmP/rKZ5Q61U8RGA==
Document Description	Regulatory Section
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	62.11kB (776432 bits)
Date Submitted	2006-09-29 00:00:00
Date Available	2006-09-29 00:00:00
Creation Date	2006-01-23 12:50:55
Producing Software	Acrobat Distiller 6.0.1 (Windows)
Document Lastmod	2006-01-23 13:08:38
Document Title	Regulatory Section
Document Creator	XSL Formatter V3.2 MR4
Document Author:	messina_clausen

Regulatory, Safety and Environmental
Notices
User Guide
© Copyright 2006 Hewlett-Packard
Development Company, L.P.
The information contained herein is subject
to change without notice. The only
warranties for HP products and services are
set forth in the express warranty statements
accompanying such products and services.
Nothing herein should be construed as
constituting an additional warranty. HP shall
not be liable for technical or editorial errors
or omissions contained herein.
First Edition: March 2006
Document Part Number: 406820-001
Table of contents
1 Regulatory notices
Federal Communications Commission notice ...................................................................................... 2
Modifications ........................................................................................................................ 2
Cables .................................................................................................................................. 2
Declaration of Conformity for products marked with the FCC logo (United States
only) ..................................................................................................................................... 3
Products with wireless LAN devices .................................................................................... 3
Brazilian notice ..................................................................................................................................... 4
Wireless LAN certification markings .................................................................................... 4
Canadian notices .................................................................................................................................. 4
Avis Canadien ...................................................................................................................................... 4
European Union notices ....................................................................................................................... 5
Products with 2.4-GHz wireless LAN devices ...................................................................... 6
France ................................................................................................................. 6
Italy ...................................................................................................................... 6
Products with 5-GHz wireless LAN devices ......................................................................... 6
Ergonomics notice ............................................................................................................... 6
German ............................................................................................................... 6
Indian notice ......................................................................................................................................... 6
Japanese notices ................................................................................................................................. 7
Wireless LAN 802.11b devices ............................................................................................ 7
Wireless LAN 802.11g devices ............................................................................................ 7
Wireless LAN certification markings .................................................................................... 7
Bluetooth devices ................................................................................................................ 9
Certification markings for Bluetooth devices ........................................................................ 9
Korean notice ..................................................................................................................................... 10
Taiwan notice ..................................................................................................................................... 10
Airline travel notice ............................................................................................................................. 10
Battery notices .................................................................................................................................... 10
Energy Star compliance ..................................................................................................................... 10
Laser safety notices ........................................................................................................................... 11
CDRH regulations .............................................................................................................. 12
Laser information ............................................................................................................... 12
Modem notices ................................................................................................................................... 13
Telecommunications device approvals .............................................................................. 13
U.S. modem statements .................................................................................................... 14
U.S. modem declarations .................................................................................................. 14
Canadian modem statements ............................................................................................ 16
Japanese modem statements ............................................................................................ 16
New Zealand modem statements ...................................................................................... 18
ENWW
iii
Voice support .................................................................................................... 18
Power cord notice ............................................................................................................................... 19
Japanese power cord notice .............................................................................................. 19
Macrovision Corporation notice .......................................................................................................... 19
2 Safety notices
Travel notice ....................................................................................................................................... 21
Battery notices .................................................................................................................................... 21
Power cord notices ............................................................................................................................. 21
3 Environmental notices
Battery disposal .................................................................................................................................. 23
Disposal of waste equipment by users in private households in the European Union ....................... 24
United States mercury disposal .......................................................................................................... 24
Index ................................................................................................................................................................. 25
iv
ENWW
1
Regulatory notices
This guide provides country-specific nonwireless and wireless regulatory notices and compliance
information for the computer product. Some notices may not apply.
One or more integrated wireless devices may be installed. In some environments, the use of wireless
devices may be restricted. Such restrictions may apply aboard airplanes, in hospitals, near explosives,
in hazardous locations, and so on. If you are uncertain of the policy that applies to the use of this product,
ask for authorization to use it before you turn it on.
To identify a hardware device, such as a wireless LAN (WLAN) network device installed on the computer,
open the Device Manager utility using the following steps:
1.
Select Start > My Computer > View system information.
2.
Click the Hardware tab, and then select Device Manager.
Expand the Network adapters list to identify the wireless network devices installed on the computer.
ENWW
Federal Communications Commission notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
●
Reorient or relocate the receiving antenna.
●
Increase the separation between the equipment and receiver.
●
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
●
Consult the dealer or an experienced radio or television technician for help.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are
not expressly approved by HP may void the user's authority to operate the equipment.
Cables
To maintain compliance with FCC Rules and Regulations, connections to this device must be made with
shielded cables having metallic RFI/EMI connector hoods.
Chapter 1
Regulatory notices
ENWW
Declaration of Conformity for products marked with the FCC logo
(United States only)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions:
1.
This device may not cause harmful interference.
2.
This device must accept any interference received, including interference that may cause
undesired operation.
If you have questions about the product that are not related to this declaration, write to
Hewlett-Packard Company
P. O. Box 692000, Mail Stop 530113
Houston, TX 77269-2000
For questions regarding this FCC declaration, write to
Hewlett-Packard Company
P. O. Box 692000, Mail Stop 510101
Houston, TX 77269-2000
or call HP at 281-514-3333
To identify your product, refer to the part, series, or model number located on the product.
Products with wireless LAN devices
WARNING! Exposure to Radio Frequency Radiation The radiated output power of this
device is below the FCC radio frequency exposure limits. Nevertheless, the device should be
used in such a manner that the potential for human contact is minimized during normal operation
of tablet PCs and notebooks.
During normal operation of tablet PCs: To avoid the possibility of exceeding the FCC radio
frequency exposure limits, human proximity to the antennae should not be less than 2.5 cm (1
inch).
During normal operation of notebooks: To avoid the possibility of exceeding the FCC radio
frequency exposure limits, human proximity to the antennae should not be less than 20 cm
(8 inches), including when the computer display is closed.
CAUTION When using IEEE 802.11a wireless LAN, this product is restricted to indoor use due
to its operation in the 5.15- to 5.25-GHz frequency range. The FCC requires this product to be
used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful
interference to co-channel mobile satellite systems. High power radar is allocated as the primary
user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause
interference with and/or damage to this device.
ENWW
Federal Communications Commission notice
Brazilian notice
Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência
prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando
em caráter primário.
Unless the computer has an Intel® PRO/Wireless 2100 Wireless LAN radio or an Intel PRO/Wireless
2200 Wireless LAN radio, the Brazilian certification mark is located on the bottom of the computer.
Wireless LAN certification markings
The Intel PRO/Wireless 2100 Wireless LAN has the certification mark below:
The Intel PRO/Wireless 2200 Wireless LAN has the certification mark below:
Canadian notices
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations. Wireless operation is subject to 2 conditions. The first is that the wireless device may not
cause interference. The second is that the wireless device must accept any interference, including
interference that may cause undesired operation of the device.
CAUTION When using IEEE 802.11a wireless LAN, this product is restricted to indoor use due
to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product
to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for
harmful interference to co-channel mobile satellite systems. High power radar is allocated as the
primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can
cause interference with and/or damage to this device.
Avis Canadien
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
Chapter 1
Regulatory notices
ENWW
European Union notices
Products bearing the CE marking comply with the following EU Directives:
●
Low Voltage Directive 73/23/EEC
●
EMC Directive 89/336/EEC
CE compliance of this product is valid only if powered with the correct CE-marked AC adapter provided
by HP.
If this product has telecommunications functionality, it also complies with the essential requirements of
the following EU Directive:
●
R&TTE Directive 1999/5/EC
Compliance with these directives implies conformity to harmonized European standards (European
Norms) that are listed in the EU Declaration of Conformity issued by HP for this product or product family.
This compliance is indicated by one of the following conformity markings placed on the product.
●
This CE marking is valid for non-telecommunications products and for EU harmonized
telecommunications products, such as Bluetooth®.
●
This CE marking is valid for EU non-harmonized telecommunications products.
*If applicable, a notified body number is used. Refer to the regulatory label provided on this product.
The telecommunications functionality of this product may be used in the following EU and EFTA
countries:
Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, and United
Kingdom.
ENWW
European Union notices
Products with 2.4-GHz wireless LAN devices
France
L'utilisation de cet equipement (2.4GHz wireless LAN) est soumise à certaines restrictions : cet
equipement peut être utilisé à l'interieur d'un batiment en utilisant toutes les frequences de 2400 a
2483.5MHz (Chaine 1–13). Pour une utilisation en environnement exterieur, vous devez utiliser les
frequences comprises entre 2454 a 2483.5-MHz (Chaine 10–13). Pour les dernières restrictions, voir
http://www.art-telecom.fr.
For 2.4-GHz wireless LAN operation of this product, certain restrictions apply. This equipment may use
the entire 2400-MHz to 2483.5-MHz frequency band (channels 1 through 13) for indoor applications.
For outdoor use, the 2454-MHz to 2483.5-MHz frequency band (channels 10 through 13) may not
be used. For the latest requirements, see http://www.art-telecom.fr.
Italy
E'necessaria una concessione ministeriale anche per l'uso del prodotto. Verifici per favore con il proprio
distributore o direttamente presso la Direzione Generale Pianificazione e Gestione Frequenze.
License required for use. Verify with your dealer or directly with the General Direction for Frequency
Planning and Management (Direzione Generale Pianificazione e Gestione Frequenze).
Products with 5-GHz wireless LAN devices
Frequency availability for 802.11a or 802.11h wireless LAN is not currently harmonized throughout the
European Union. For compliance requirements, users should verify compliance with their supplier, local
HP office, or telecommunications authority.
Ergonomics notice
German
Computers bearing the “GS” approval mark meet the applicable ergonomic requirements when used in
conjunction with docking bases, keyboards, and monitors that bear the “GS” approval mark. Computers
in a stand-alone mode are not intended for continuous use in an office environment.
Indian notice
The India Telegraph Act of 1885 requires that an IEEE 802.11a wireless LAN end user obtain a license.
To obtain this license, please contact The Wireless Planning & Coordination Wing, Ministry of
Communications, Sanchar Ghavan New Delhi.
Chapter 1
Regulatory notices
ENWW
Japanese notices
Wireless LAN 802.11b devices
Wireless LAN 802.11g devices
Wireless LAN certification markings
The Intel PRO/Wireless 2200b/g Wireless LAN has the certification mark below:
The Intel PRO/Wireless 2915a/b/g Wireless LAN has the certification mark below:
ENWW
Japanese notices
The Intel PRO/Wireless 3945a/b/g Wireless LAN has the certification mark below:
The Broadcom 802.11b/g Wireless LAN has the certification mark below:
The Broadcom 4311BG 802.11b/g Wireless LAN has the certification mark below:
The Broadcom 4311AG 802.11a/b/g Wireless LAN has the certification mark below:
The Broadcom 802.11a/b/g Wireless LAN has the certification mark below:
The Broadcom 802.11b/g Wireless LAN with Broadrange has the certification mark below:
Chapter 1
Regulatory notices
ENWW
The Broadcom 802.11a/b/g Wireless LAN with Broadrange has the certification mark below:
Bluetooth devices
Certification markings for Bluetooth devices
The HP integrated module with Bluetooth has the certification mark below:
The HP integrated module with Bluetooth 2.0 has the certification mark below:
ENWW
Japanese notices
Korean notice
Taiwan notice
Airline travel notice
Use of electronic equipment aboard commercial aircraft is at the discretion of the airline.
Battery notices
CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions.
For information about removing a battery pack, refer to the user guide included with the product.
Energy Star compliance
Computers bearing the Energy Star logo are compliant with the U.S. Environmental Protection Agency
(EPA) Energy Star Computers Program 3.0. The EPA Energy Star logo does not imply endorsement by
the EPA. As an Energy Star Partner, HP has determined that the product meets the Energy Star
guidelines for energy efficiency.
10
Chapter 1
Regulatory notices
ENWW
Laser safety notices
All systems equipped with laser products comply with appropriate safety standards, including IEC
60825. With specific regard to the laser, the equipment complies with laser product performance
standards set by government agencies for Class 1 laser products. It does not emit hazardous light; the
beam is totally enclosed during all modes of customer operation and maintenance.
ENWW
Laser safety notices
11
CDRH regulations
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration
implemented regulations for laser products effective August 2, 1976. These regulations apply to laser
products manufactured from August 1, 1976, onward. Compliance is mandatory for products marketed
in the United States.
WARNING! Use of controls or adjustments, or performance of procedures other than those
specified herein or in the laser product installation guide, may result in hazardous radiation
exposure.
This system is classified as a Class 1 laser product. This label appears on the laser product.
Laser information
●
Laser Type: Semiconductor GaAlAs
●
Wave Length: 780 ± 35 nm
●
Divergence Angle: 53.5 degrees ± 1.5 degrees
●
Output Power: Less than 0.2mW or 10,869 W·m-2sr-1
●
Polarization: Circular
●
Numerical Aperture: 0.45 ± 0.04
Only authorized technicians trained by HP should attempt to repair this equipment. All troubleshooting
and repair procedures are detailed to allow only subassembly and module-level repair. Because of the
complexity of the individual boards and subassemblies, no one should attempt to make repairs at the
component level or to make modifications to any printed wiring board. Improper repairs can create a
safety hazard.
12
Chapter 1
Regulatory notices
ENWW
Modem notices
WARNING! To reduce the risk of fire, electric shock, and injury to persons when using this
device, always follow basic safety precautions, including the following:
Do not use this product near water—for example, near a bathtub, wash bowl, kitchen sink or
laundry tub, in a wet basement, or near a swimming pool.
Avoid using this product during an electrical storm. There is a remote risk of electric shock from
lightning.
Do not use this product to report a gas leak while in the vicinity of the leak.
Always disconnect the modem cable before opening the equipment enclosure or touching an
uninsulated modem cable, jack, or internal component.
If this product was not provided with a telephone line cord, use only No. 26 AWG or larger
telecommunication line cord.
Do not plug a modem or telephone cable into the RJ-45 (network) jack.
SAVE THESE INSTRUCTIONS
Telecommunications device approvals
The telecommunications device in the computer is approved for connection to the telephone network in
the countries whose approval markings are indicated on the product label located on the bottom of the
computer or on the modem.
Refer to the user guide included with the product to ensure that the product is configured for the country
in which the product is located. Selecting a country other than the one in which it is located may cause
the modem to be configured in a way that violates the telecommunication regulations/laws of that
country. In addition, the modem may not function properly if the correct country selection is not made.
If, when you select a country, a message appears that states that the country is not supported, this
means that the modem has not been approved for use in this country and thus should not be used.
ENWW
Modem notices
13
U.S. modem statements
This equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA.
On the bottom of the computer or on the modem is a label that contains, among other information, a
product identifier in the format US:AAAEQ##TXXXX. Provide this information to the telephone company
if you are requested to do so.
Applicable certification jack USOC = RJ11C. A plug and jack used to connect this equipment to the
premises wiring and telephone network must comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this
product. It is designed to be connected to a compatible modular jack that is also compliant. See
installation instructions for details.
The REN is used to determine the number of devices that may be connected to a telephone line.
Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming
call. In most but not all locations, the sum of RENs should not exceed five (5.0). To be certain of the
number of devices that may be connected to a line, as determined by the total RENs, contact the local
telephone company. For products approved after July 23, 2001, the REN for this product is part of the
product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN
without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on
the label.
If this HP equipment causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. But, if advance notice isn't practical,
the telephone company will notify you as soon as possible. Also, you will be advised of your right to file
a complaint with the FCC if you believe it is necessary.
The telephone company may make changes to its facilities, equipment, operations, or procedures that
could affect the operation of the equipment. If this happens, the telephone company will provide advance
notice in order for you to make necessary modifications to maintain uninterrupted telephone service.
If trouble is experienced with this equipment, call Customer Care. If the equipment is causing harm to
the telephone network, the telephone company may request that you disconnect the equipment until
the problem is resolved. You should perform repairs only to the equipment specifically discussed in the
“Troubleshooting” section of the user guide, if one is provided.
Connection to party line service is subject to state tariffs. Contact the state public utility commission,
public service commission, or corporation commission for information.
If your home has specially wired alarm equipment connected to the telephone line, ensure that the
installation of this HP equipment does not disable your alarm equipment. If you have questions about
what will disable alarm equipment, consult your telephone company or a qualified installer.
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer
or other electronic device, including fax machines, to send any message unless such message clearly
contains in a margin at the top or bottom of each transmitted page, or on the first page of the
transmission, the date and time it is sent and an identification of the business, other entity, or other
individual sending the message, and the telephone number of the sending machine or such business,
other entity, or individual. (The telephone number provided may not be a 900 number or any other
number for which charges exceed local or long-distance transmission charges).
In order to program this information into your fax machine, you should complete the steps outlined in
the faxing software instructions.
U.S. modem declarations
Refer to the following modem vendor declarations for the modem device installed in your computer:
14
Chapter 1
Regulatory notices
ENWW
ENWW
Modem notices
15
Canadian modem statements
This equipment meets the applicable Industry Canada technical specifications.
The Ringer Equivalence Number, REN, is an indication of the maximum number of devices allowed to
be connected to a telephone interface. The termination on an interface may consist of any combination
of devices, subject only to the requirement that the sum of the RENs of all devices does not exceed 5.
The REN for this terminal equipment is 1.0.
Japanese modem statements
If the computer does not have the Japanese certification mark on the bottom of the computer, refer to
the appropriate certification marking below:
The Japanese certification mark for the Agere Systems AC'97 modem is below:
16
Chapter 1
Regulatory notices
ENWW
The Japanese certification mark for the HDAUDIO Soft Data Fax Modem with SmartCP is below:
The Japanese certification mark for the Agere Systems HDA modem is below:
The Japanese certification mark for the HDAUDIO Soft Data Fax Modem with SmartCP is below:
ENWW
Modem notices
17
New Zealand modem statements
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted
that the item complies with minimum conditions for connection to its network. It indicates no endorsement
of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance
that any item will work correctly in all respects with another item of Telepermitted equipment of a different
make or model, nor does it imply that any product is compatible with all of Telecom's network services.
This equipment is not capable, under all operating conditions, of correct operation at the higher speeds
for which it is designed. Telecom will accept no responsibility should difficulties arise in such
circumstances.
If this device is equipped with pulse dialing, note that there is no guarantee that Telecom lines will always
continue to support pulse dialing.
Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give
rise to bell tinkle or noise and may also cause a false answer condition. Should such problems occur,
the user should not contact the Telecom Faults Service.
Some parameters required for compliance with Telecom's Telepermit requirements are dependent on
the equipment (PC) associated with this device. The associated equipment shall be set to operate within
the following limits for compliance with Telecom's Specifications.
a.
There shall be no more than 10 call attempts to the same number within any 30-minute period for
any single manual call initiation.
b.
The equipment shall go on-hook for a period of not less than 30 seconds between the end of one
attempt and the beginning of the next attempt.
c.
Where automatic calls are made to different numbers, the equipment shall be set to go on-hook
for a period of not less than 5 seconds between the end of one attempt and the beginning of the
next attempt.
d.
The equipment shall be set to ensure that calls are answered between 3 and 30 seconds of receipt
of ringing (So set between 2 and 10).
Voice support
All persons using this device for recording telephone conversations shall comply with New Zealand law.
This requires that at least one party to the conversation is aware that it is being recorded. In addition,
the Principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature of the
personal information collected, the purpose for its collection, how it is to be used, and what is disclosed
to any other party.
This equipment shall not be set to make automatic calls to the Telecom ‘111' Emergency Service.
18
Chapter 1
Regulatory notices
ENWW
Power cord notice
If you were not provided with a power cord for the computer or for an external power accessory intended
for use with the computer, you should purchase a power cord that is approved for use in your country.
The power cord must be rated for the product and for the voltage and current marked on the product's
electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and
current rating marked on the product. In addition, the diameter of the wire must be a minimum of
0.75 mm²/18AWG, and the length of the cord must be between 1.5 m (5 ft) and 2 m (6½ ft). If you have
questions about the type of power cord to use, contact your service partner.
A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon
it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the
cord exits from the product.
Japanese power cord notice
Macrovision Corporation notice
This product incorporates copyright protection technology that is protected by method claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and
is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
ENWW
Power cord notice
19
20
Chapter 1
Regulatory notices
ENWW
2
Safety notices
Travel notice
WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not
attempt to power the computer with a voltage converter kit sold for appliances.
Battery notices
WARNING! To reduce the risk of fire or burns, do not disassemble, crush, or puncture a battery
pack; short the external contacts on a battery pack; or dispose of a battery pack in fire or water.
Do not expose a battery pack to temperatures above 60°C (140°F).
WARNING! Keep the battery pack away from children.
WARNING! To reduce potential safety issues, only the battery pack provided with the
computer, a replacement battery pack provided by HP, or a compatible battery pack purchased
as an accessory from HP should be used with the computer.
Power cord notices
WARNING! To reduce the risk of electric shock or damage to the equipment:
Plug the power cord into an AC outlet that is easily accessible at all times.
Disconnect power from the computer by unplugging the power cord from the AC outlet (not by
unplugging the power cord from the computer).
If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed)
3-pin outlet. Do not disable the power cord grounding pin; for example, by attaching a 2-pin
adapter. The grounding pin is an important safety feature.
WARNING! To reduce potential safety issues, only the AC adapter provided with the computer,
a replacement AC adapter provided by HP, or an AC adapter purchased as an accessory from
HP should be used with the computer.
ENWW
Travel notice
21
22
Chapter 2
Safety notices
ENWW
3
Environmental notices
This chapter provides country-specific environmental notices and compliance information. Some notices
may not apply.
Battery disposal
WARNING! When a battery pack has reached the end of its useful life, do not dispose of the
battery pack in general household waste. Follow the local laws and regulations in your area for
computer battery pack disposal.
ENWW
Battery disposal
23
Disposal of waste equipment by users in private
households in the European Union
This symbol on the product or on its packaging indicates that this product must not be disposed of with
your other household waste. Instead, it is your responsibility to dispose of your waste equipment by
handing it over to a designated collection point for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your waste equipment at the time of disposal will
help to conserve natural resources and ensure that it is recycled in a manner that protects human health
and the environment. For more information about where you can drop off your waste equipment for
recycling, please contact your local city office, your household waste disposal service or the shop where
you purchased the product.
United States mercury disposal
This computer contains mercury in the fluorescent lamp of the computer display, which may require
special handling when the computer has reached the end of its useful life. Because of environmental
considerations, local authorities may regulate the disposal of the mercury.
For disposal or recycling information, please contact your local authorities or the Electronic Industries
Alliance (EIA) at http://www.eiae.org.
24
Chapter 3
Environmental notices
ENWW
Index
Symbols/Numerics
2.4-GHz wireless LAN devices
airline travel notice
hardware device, identifying
10
battery disposal notice
battery notice 10, 21
Brazilian notice 4
23
Canadian modem statement 16
Canadian notices 4
Center for Devices and Radiological
Health 12
Declaration of Conformity 3
disposal notices
battery 23
equipment 24
mercury 24
Energy Star compliance 10
environmental notices 23
equipment disposal notice 24
ergonomics notice 6
European Union notices 5
Federal Communications
Commission
cables 2
modifications 2
notice 2
France, 2.4-GHz wireless LAN
devices 6
ENWW
GS Notice 6
Indian notice 6
Italy, 2.4-GHz wireless LAN devices
Japanese modem statement 16
Japanese notice 7
Japanese power cord notice 19
Korean notice
10
laser information 12
laser safety notice 11
Macrovision Corporation notice
19
mercury disposal notice 24
modem notices 13
modem statements
Canadian 16
Japanese 16
New Zealand 18
U.S. 14
modifications, Federal
Communications Commission
New Zealand modem statement
18
notices
airline travel 10
battery 10, 21, 23
Brazilian 4
Canadian 4
environmental 23
equipment disposal 24
ergonomics 6
European Union 5
Federal Communications
Commission 2
Indian 6
Japanese 7
Japanese power cord 19
Korean 10
laser safety 11
Macrovision Corporation 19
mercury disposal 24
modem 13
power cords 19, 21
Taiwan 10
travel 21
power cord notice
19, 21
Taiwan notice 10
travel notice 21
U.S. modem statement 14
voice support
18
wireless LAN devices 3
Index
25
26
Index
ENWW


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 32
Page Mode                       : UseOutlines
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:2282b101-93db-4c1c-af7a-2e719e4a49c9
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Create Date                     : 2006:01:23 12:50:55-07:00
Creator Tool                    : XSL Formatter V3.2 MR4
Modify Date                     : 2006:01:23 13:08:38-07:00
Metadata Date                   : 2006:01:23 13:08:38-07:00
Document ID                     : uuid:4e44a4e2-cbc1-46d0-b145-73ddba7e8810
Format                          : application/pdf
Creator                         : messina_clausen
Title                           : 
Author                          : messina_clausen

EXIF Metadata provided by EXIF.tools