Sierra Wireless MC8775-H Multi-Mode & Multi-Band Wireless Network MiniCard User Manual Regulatory Section

Sierra Wireless Inc. Multi-Mode & Multi-Band Wireless Network MiniCard Regulatory Section

UserManual.wiki >

Sierra Wireless >

MC8775-H User Manual >

Regulatory Section

Contents

Regulatory Section

Regulatory, Safety and EnvironmentalNoticesUser Guide

© Copyright 2006 Hewlett-PackardDevelopment Company, L.P.The information contained herein is subjectto change without notice. The onlywarranties for HP products and services areset forth in the express warranty statementsaccompanying such products and services.Nothing herein should be construed asconstituting an additional warranty. HP shallnot be liable for technical or editorial errorsor omissions contained herein.First Edition: March 2006Document Part Number: 406820-001

Voice support .................................................................................................... 18Power cord notice ............................................................................................................................... 19Japanese power cord notice .............................................................................................. 19Macrovision Corporation notice .......................................................................................................... 192 Safety noticesTravel notice ....................................................................................................................................... 21Battery notices .................................................................................................................................... 21Power cord notices ............................................................................................................................. 213 Environmental noticesBattery disposal .................................................................................................................................. 23Disposal of waste equipment by users in private households in the European Union ....................... 24United States mercury disposal .......................................................................................................... 24Index ................................................................................................................................................................. 25iv ENWW

1 Regulatory noticesThis guide provides country-specific nonwireless and wireless regulatory notices and complianceinformation for the computer product. Some notices may not apply.One or more integrated wireless devices may be installed. In some environments, the use of wirelessdevices may be restricted. Such restrictions may apply aboard airplanes, in hospitals, near explosives,in hazardous locations, and so on. If you are uncertain of the policy that applies to the use of this product,ask for authorization to use it before you turn it on.To identify a hardware device, such as a wireless LAN (WLAN) network device installed on the computer,open the Device Manager utility using the following steps:1. Select Start > My Computer > View system information.2. Click the Hardware tab, and then select Device Manager.Expand the Network adapters list to identify the wireless network devices installed on the computer.ENWW 1

Federal Communications Commission noticeThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuantto Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee that interference will not occurin a particular installation.If this equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct the interferenceby one or more of the following measures:●Reorient or relocate the receiving antenna.●Increase the separation between the equipment and receiver.●Connect the equipment to an outlet on a circuit different from that to which the receiver isconnected.●Consult the dealer or an experienced radio or television technician for help.ModificationsThe FCC requires the user to be notified that any changes or modifications made to this device that arenot expressly approved by HP may void the user's authority to operate the equipment.CablesTo maintain compliance with FCC Rules and Regulations, connections to this device must be made withshielded cables having metallic RFI/EMI connector hoods.2 Chapter 1 Regulatory notices ENWW

Brazilian noticeEste equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferênciaprejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operandoem caráter primário.Unless the computer has an Intel® PRO/Wireless 2100 Wireless LAN radio or an Intel PRO/Wireless2200 Wireless LAN radio, the Brazilian certification mark is located on the bottom of the computer.Wireless LAN certification markingsThe Intel PRO/Wireless 2100 Wireless LAN has the certification mark below:The Intel PRO/Wireless 2200 Wireless LAN has the certification mark below:Canadian noticesThis Class B digital apparatus meets all requirements of the Canadian Interference-Causing EquipmentRegulations. Wireless operation is subject to 2 conditions. The first is that the wireless device may notcause interference. The second is that the wireless device must accept any interference, includinginterference that may cause undesired operation of the device.CAUTION When using IEEE 802.11a wireless LAN, this product is restricted to indoor use dueto its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this productto be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential forharmful interference to co-channel mobile satellite systems. High power radar is allocated as theprimary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations cancause interference with and/or damage to this device.Avis CanadienCet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matérielbrouilleur du Canada.4 Chapter 1 Regulatory notices ENWW

European Union noticesProducts bearing the CE marking comply with the following EU Directives:●Low Voltage Directive 73/23/EEC●EMC Directive 89/336/EECCE compliance of this product is valid only if powered with the correct CE-marked AC adapter providedby HP.If this product has telecommunications functionality, it also complies with the essential requirements ofthe following EU Directive:●R&TTE Directive 1999/5/ECCompliance with these directives implies conformity to harmonized European standards (EuropeanNorms) that are listed in the EU Declaration of Conformity issued by HP for this product or product family.This compliance is indicated by one of the following conformity markings placed on the product.●This CE marking is valid for non-telecommunications products and for EU harmonizedtelecommunications products, such as Bluetooth®.●This CE marking is valid for EU non-harmonized telecommunications products.*If applicable, a notified body number is used. Refer to the regulatory label provided on this product.The telecommunications functionality of this product may be used in the following EU and EFTAcountries:Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands,Norway, Poland, Portugal, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, and UnitedKingdom.ENWW European Union notices 5

Products with 2.4-GHz wireless LAN devicesFranceL'utilisation de cet equipement (2.4GHz wireless LAN) est soumise à certaines restrictions : cetequipement peut être utilisé à l'interieur d'un batiment en utilisant toutes les frequences de 2400 a2483.5MHz (Chaine 1–13). Pour une utilisation en environnement exterieur, vous devez utiliser lesfrequences comprises entre 2454 a 2483.5-MHz (Chaine 10–13). Pour les dernières restrictions, voirhttp://www.art-telecom.fr.For 2.4-GHz wireless LAN operation of this product, certain restrictions apply. This equipment may usethe entire 2400-MHz to 2483.5-MHz frequency band (channels 1 through 13) for indoor applications.For outdoor use, the 2454-MHz to 2483.5-MHz frequency band (channels 10 through 13) may notbe used. For the latest requirements, see http://www.art-telecom.fr.ItalyE'necessaria una concessione ministeriale anche per l'uso del prodotto. Verifici per favore con il propriodistributore o direttamente presso la Direzione Generale Pianificazione e Gestione Frequenze.License required for use. Verify with your dealer or directly with the General Direction for FrequencyPlanning and Management (Direzione Generale Pianificazione e Gestione Frequenze).Products with 5-GHz wireless LAN devicesFrequency availability for 802.11a or 802.11h wireless LAN is not currently harmonized throughout theEuropean Union. For compliance requirements, users should verify compliance with their supplier, localHP office, or telecommunications authority.Ergonomics noticeGermanComputers bearing the “GS” approval mark meet the applicable ergonomic requirements when used inconjunction with docking bases, keyboards, and monitors that bear the “GS” approval mark. Computersin a stand-alone mode are not intended for continuous use in an office environment.Indian noticeThe India Telegraph Act of 1885 requires that an IEEE 802.11a wireless LAN end user obtain a license.To obtain this license, please contact The Wireless Planning & Coordination Wing, Ministry ofCommunications, Sanchar Ghavan New Delhi.6 Chapter 1 Regulatory notices ENWW

Japanese noticesWireless LAN 802.11b devicesWireless LAN 802.11g devicesWireless LAN certification markingsThe Intel PRO/Wireless 2200b/g Wireless LAN has the certification mark below:The Intel PRO/Wireless 2915a/b/g Wireless LAN has the certification mark below:ENWW Japanese notices 7

The Intel PRO/Wireless 3945a/b/g Wireless LAN has the certification mark below:The Broadcom 802.11b/g Wireless LAN has the certification mark below:The Broadcom 4311BG 802.11b/g Wireless LAN has the certification mark below:The Broadcom 4311AG 802.11a/b/g Wireless LAN has the certification mark below:The Broadcom 802.11a/b/g Wireless LAN has the certification mark below:The Broadcom 802.11b/g Wireless LAN with Broadrange has the certification mark below:8 Chapter 1 Regulatory notices ENWW

The Broadcom 802.11a/b/g Wireless LAN with Broadrange has the certification mark below:Bluetooth devicesCertification markings for Bluetooth devicesThe HP integrated module with Bluetooth has the certification mark below:The HP integrated module with Bluetooth 2.0 has the certification mark below:ENWW Japanese notices 9

Laser safety noticesAll systems equipped with laser products comply with appropriate safety standards, including IEC60825. With specific regard to the laser, the equipment complies with laser product performancestandards set by government agencies for Class 1 laser products. It does not emit hazardous light; thebeam is totally enclosed during all modes of customer operation and maintenance.ENWW Laser safety notices 11

CDRH regulationsThe Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administrationimplemented regulations for laser products effective August 2, 1976. These regulations apply to laserproducts manufactured from August 1, 1976, onward. Compliance is mandatory for products marketedin the United States.WARNING! Use of controls or adjustments, or performance of procedures other than thosespecified herein or in the laser product installation guide, may result in hazardous radiationexposure.This system is classified as a Class 1 laser product. This label appears on the laser product.Laser information●Laser Type: Semiconductor GaAlAs●Wave Length: 780 ± 35 nm●Divergence Angle: 53.5 degrees ± 1.5 degrees●Output Power: Less than 0.2mW or 10,869 W·m-2sr-1●Polarization: Circular●Numerical Aperture: 0.45 ± 0.04Only authorized technicians trained by HP should attempt to repair this equipment. All troubleshootingand repair procedures are detailed to allow only subassembly and module-level repair. Because of thecomplexity of the individual boards and subassemblies, no one should attempt to make repairs at thecomponent level or to make modifications to any printed wiring board. Improper repairs can create asafety hazard.12 Chapter 1 Regulatory notices ENWW

Modem noticesWARNING! To reduce the risk of fire, electric shock, and injury to persons when using thisdevice, always follow basic safety precautions, including the following:Do not use this product near water—for example, near a bathtub, wash bowl, kitchen sink orlaundry tub, in a wet basement, or near a swimming pool.Avoid using this product during an electrical storm. There is a remote risk of electric shock fromlightning.Do not use this product to report a gas leak while in the vicinity of the leak.Always disconnect the modem cable before opening the equipment enclosure or touching anuninsulated modem cable, jack, or internal component.If this product was not provided with a telephone line cord, use only No. 26 AWG or largertelecommunication line cord.Do not plug a modem or telephone cable into the RJ-45 (network) jack.SAVE THESE INSTRUCTIONSTelecommunications device approvalsThe telecommunications device in the computer is approved for connection to the telephone network inthe countries whose approval markings are indicated on the product label located on the bottom of thecomputer or on the modem.Refer to the user guide included with the product to ensure that the product is configured for the countryin which the product is located. Selecting a country other than the one in which it is located may causethe modem to be configured in a way that violates the telecommunication regulations/laws of thatcountry. In addition, the modem may not function properly if the correct country selection is not made.If, when you select a country, a message appears that states that the country is not supported, thismeans that the modem has not been approved for use in this country and thus should not be used.ENWW Modem notices 13

U.S. modem statementsThis equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA.On the bottom of the computer or on the modem is a label that contains, among other information, aproduct identifier in the format US:AAAEQ##TXXXX. Provide this information to the telephone companyif you are requested to do so.Applicable certification jack USOC = RJ11C. A plug and jack used to connect this equipment to thepremises wiring and telephone network must comply with the applicable FCC Part 68 rules andrequirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with thisproduct. It is designed to be connected to a compatible modular jack that is also compliant. Seeinstallation instructions for details.The REN is used to determine the number of devices that may be connected to a telephone line.Excessive RENs on a telephone line may result in the devices not ringing in response to an incomingcall. In most but not all locations, the sum of RENs should not exceed five (5.0). To be certain of thenumber of devices that may be connected to a line, as determined by the total RENs, contact the localtelephone company. For products approved after July 23, 2001, the REN for this product is part of theproduct identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the RENwithout a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown onthe label.If this HP equipment causes harm to the telephone network, the telephone company will notify you inadvance that temporary discontinuance of service may be required. But, if advance notice isn't practical,the telephone company will notify you as soon as possible. Also, you will be advised of your right to filea complaint with the FCC if you believe it is necessary.The telephone company may make changes to its facilities, equipment, operations, or procedures thatcould affect the operation of the equipment. If this happens, the telephone company will provide advancenotice in order for you to make necessary modifications to maintain uninterrupted telephone service.If trouble is experienced with this equipment, call Customer Care. If the equipment is causing harm tothe telephone network, the telephone company may request that you disconnect the equipment untilthe problem is resolved. You should perform repairs only to the equipment specifically discussed in the“Troubleshooting” section of the user guide, if one is provided.Connection to party line service is subject to state tariffs. Contact the state public utility commission,public service commission, or corporation commission for information.If your home has specially wired alarm equipment connected to the telephone line, ensure that theinstallation of this HP equipment does not disable your alarm equipment. If you have questions aboutwhat will disable alarm equipment, consult your telephone company or a qualified installer.The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computeror other electronic device, including fax machines, to send any message unless such message clearlycontains in a margin at the top or bottom of each transmitted page, or on the first page of thetransmission, the date and time it is sent and an identification of the business, other entity, or otherindividual sending the message, and the telephone number of the sending machine or such business,other entity, or individual. (The telephone number provided may not be a 900 number or any othernumber for which charges exceed local or long-distance transmission charges).In order to program this information into your fax machine, you should complete the steps outlined inthe faxing software instructions.U.S. modem declarationsRefer to the following modem vendor declarations for the modem device installed in your computer:14 Chapter 1 Regulatory notices ENWW

ENWW Modem notices 15

Canadian modem statementsThis equipment meets the applicable Industry Canada technical specifications.The Ringer Equivalence Number, REN, is an indication of the maximum number of devices allowed tobe connected to a telephone interface. The termination on an interface may consist of any combinationof devices, subject only to the requirement that the sum of the RENs of all devices does not exceed 5.The REN for this terminal equipment is 1.0.Japanese modem statementsIf the computer does not have the Japanese certification mark on the bottom of the computer, refer tothe appropriate certification marking below:The Japanese certification mark for the Agere Systems AC'97 modem is below:16 Chapter 1 Regulatory notices ENWW

The Japanese certification mark for the HDAUDIO Soft Data Fax Modem with SmartCP is below:The Japanese certification mark for the Agere Systems HDA modem is below:The Japanese certification mark for the HDAUDIO Soft Data Fax Modem with SmartCP is below:ENWW Modem notices 17

New Zealand modem statementsThe grant of a Telepermit for any item of terminal equipment indicates only that Telecom has acceptedthat the item complies with minimum conditions for connection to its network. It indicates no endorsementof the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurancethat any item will work correctly in all respects with another item of Telepermitted equipment of a differentmake or model, nor does it imply that any product is compatible with all of Telecom's network services.This equipment is not capable, under all operating conditions, of correct operation at the higher speedsfor which it is designed. Telecom will accept no responsibility should difficulties arise in suchcircumstances.If this device is equipped with pulse dialing, note that there is no guarantee that Telecom lines will alwayscontinue to support pulse dialing.Use of pulse dialing, when this equipment is connected to the same line as other equipment, may giverise to bell tinkle or noise and may also cause a false answer condition. Should such problems occur,the user should not contact the Telecom Faults Service.Some parameters required for compliance with Telecom's Telepermit requirements are dependent onthe equipment (PC) associated with this device. The associated equipment shall be set to operate withinthe following limits for compliance with Telecom's Specifications.a. There shall be no more than 10 call attempts to the same number within any 30-minute period forany single manual call initiation.b. The equipment shall go on-hook for a period of not less than 30 seconds between the end of oneattempt and the beginning of the next attempt.c. Where automatic calls are made to different numbers, the equipment shall be set to go on-hookfor a period of not less than 5 seconds between the end of one attempt and the beginning of thenext attempt.d. The equipment shall be set to ensure that calls are answered between 3 and 30 seconds of receiptof ringing (So set between 2 and 10).Voice supportAll persons using this device for recording telephone conversations shall comply with New Zealand law.This requires that at least one party to the conversation is aware that it is being recorded. In addition,the Principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature of thepersonal information collected, the purpose for its collection, how it is to be used, and what is disclosedto any other party.This equipment shall not be set to make automatic calls to the Telecom ‘111' Emergency Service.18 Chapter 1 Regulatory notices ENWW

Power cord noticeIf you were not provided with a power cord for the computer or for an external power accessory intendedfor use with the computer, you should purchase a power cord that is approved for use in your country.The power cord must be rated for the product and for the voltage and current marked on the product'selectrical ratings label. The voltage and current rating of the cord should be greater than the voltage andcurrent rating marked on the product. In addition, the diameter of the wire must be a minimum of0.75 mm²/18AWG, and the length of the cord must be between 1.5 m (5 ft) and 2 m (6½ ft). If you havequestions about the type of power cord to use, contact your service partner.A power cord should be routed so that it is not likely to be walked on or pinched by items placed uponit or against it. Particular attention should be paid to the plug, electrical outlet, and the point where thecord exits from the product.Japanese power cord noticeMacrovision Corporation noticeThis product incorporates copyright protection technology that is protected by method claims of certainU.S. patents and other intellectual property rights owned by Macrovision Corporation and other rightsowners. Use of this copyright protection technology must be authorized by Macrovision Corporation andis intended for home and other limited viewing uses only, unless otherwise authorized by MacrovisionCorporation. Reverse engineering or disassembly is prohibited.ENWW Power cord notice 19

20 Chapter 1 Regulatory notices ENWW

2 Safety noticesTravel noticeWARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do notattempt to power the computer with a voltage converter kit sold for appliances.Battery noticesWARNING! To reduce the risk of fire or burns, do not disassemble, crush, or puncture a batterypack; short the external contacts on a battery pack; or dispose of a battery pack in fire or water.Do not expose a battery pack to temperatures above 60°C (140°F).WARNING! Keep the battery pack away from children.WARNING! To reduce potential safety issues, only the battery pack provided with thecomputer, a replacement battery pack provided by HP, or a compatible battery pack purchasedas an accessory from HP should be used with the computer.Power cord noticesWARNING! To reduce the risk of electric shock or damage to the equipment:Plug the power cord into an AC outlet that is easily accessible at all times.Disconnect power from the computer by unplugging the power cord from the AC outlet (not byunplugging the power cord from the computer).If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed)3-pin outlet. Do not disable the power cord grounding pin; for example, by attaching a 2-pinadapter. The grounding pin is an important safety feature.WARNING! To reduce potential safety issues, only the AC adapter provided with the computer,a replacement AC adapter provided by HP, or an AC adapter purchased as an accessory fromHP should be used with the computer.ENWW Travel notice 21

22 Chapter 2 Safety notices ENWW

3 Environmental noticesThis chapter provides country-specific environmental notices and compliance information. Some noticesmay not apply.Battery disposalWARNING! When a battery pack has reached the end of its useful life, do not dispose of thebattery pack in general household waste. Follow the local laws and regulations in your area forcomputer battery pack disposal.ENWW Battery disposal 23

Disposal of waste equipment by users in privatehouseholds in the European UnionThis symbol on the product or on its packaging indicates that this product must not be disposed of withyour other household waste. Instead, it is your responsibility to dispose of your waste equipment byhanding it over to a designated collection point for the recycling of waste electrical and electronicequipment. The separate collection and recycling of your waste equipment at the time of disposal willhelp to conserve natural resources and ensure that it is recycled in a manner that protects human healthand the environment. For more information about where you can drop off your waste equipment forrecycling, please contact your local city office, your household waste disposal service or the shop whereyou purchased the product.United States mercury disposalThis computer contains mercury in the fluorescent lamp of the computer display, which may requirespecial handling when the computer has reached the end of its useful life. Because of environmentalconsiderations, local authorities may regulate the disposal of the mercury.For disposal or recycling information, please contact your local authorities or the Electronic IndustriesAlliance (EIA) at http://www.eiae.org.24 Chapter 3 Environmental notices ENWW

IndexSymbols/Numerics2.4-GHz wireless LAN devices6Aairline travel notice 10Bbattery disposal notice 23battery notice 10, 21Brazilian notice 4CCanadian modem statement 16Canadian notices 4Center for Devices and RadiologicalHealth 12DDeclaration of Conformity 3disposal noticesbattery 23equipment 24mercury 24EEnergy Star compliance 10environmental notices 23equipment disposal notice 24ergonomics notice 6European Union notices 5FFederal CommunicationsCommissioncables 2modifications 2notice 2France, 2.4-GHz wireless LANdevices 6GGS Notice 6Hhardware device, identifying 1IIndian notice 6Italy, 2.4-GHz wireless LAN devices6JJapanese modem statement 16Japanese notice 7Japanese power cord notice 19KKorean notice 10Llaser information 12laser safety notice 11MMacrovision Corporation notice19mercury disposal notice 24modem notices 13modem statementsCanadian 16Japanese 16New Zealand 18U.S. 14modifications, FederalCommunications Commission 2NNew Zealand modem statement18noticesairline travel 10battery 10, 21, 23Brazilian 4Canadian 4environmental 23equipment disposal 24ergonomics 6European Union 5Federal CommunicationsCommission 2Indian 6Japanese 7Japanese power cord 19Korean 10laser safety 11Macrovision Corporation 19mercury disposal 24modem 13power cords 19, 21Taiwan 10travel 21Ppower cord notice 19, 21TTaiwan notice 10travel notice 21UU.S. modem statement 14Vvoice support 18Wwireless LAN devices 3ENWW Index 25

26 Index ENWW

Navigation menu