Sierra Wireless Q2426-SK GSM/GPRS Starter Kit Q2426B User Manual WISMO Quik Q2400 series

Sierra Wireless, Inc. GSM/GPRS Starter Kit Q2426B WISMO Quik Q2400 series

UserMan rev

Download: Sierra Wireless Q2426-SK GSM/GPRS Starter Kit Q2426B User Manual WISMO Quik Q2400 series
Mirror Download [FCC.gov]Sierra Wireless Q2426-SK GSM/GPRS Starter Kit Q2426B User Manual WISMO Quik Q2400 series
Document ID402711
Application IDbEeqwBwmUMasy0lN9q5aeQ==
Document DescriptionUserMan rev
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize135.03kB (1687832 bits)
Date Submitted2004-03-08 00:00:00
Date Available2003-07-16 00:00:00
Creation Date2004-03-05 17:05:55
Producing SoftwareAcrobat Distiller 5.0.5 (Windows)
Document Lastmod2004-03-05 17:09:23
Document TitleWISMO Quik Q2400 series
Document CreatorAcrobat PDFMaker 5.0 for Word
Document Author: Marc DESCUSSES

WISMO Quik Q2400 series
Q2406 and Q2426
Product Specification
Reference: WM_PRJ_Q2400_PTS_002
Revision: 004
Date: March 5, 2004
confidential ©
Page : 1 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
Document Information
Revision
001
Date
24 Oct 02
History of the evolution
Creation (Preliminary version)
002
24 Jan. 03
003
004
14 Apr 03
March 5, 2004
Remove “Preliminary” status.
Modification in applicable products list:
•
Add Q2406D and Q2426D products and Q2406E
and Q2426E products
•
Remove Q2406C and Q2426C products
Update sensitivity value for GSM850 and EGSM900 RF
bands.
Update mechanical drawing.
Extract of Design guidelines information
FCC wording for starter kit approval and not modular approval Gulmit Sobti
confidential ©
Page : 2 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
Contents
Document Information...................................................................................................................................................................... 2
Contents.............................................................................................................................................................................................. 3
Caution 6
Trademarks...........................................................................................................................................................................................6
Overview 7
Reference documents ....................................................................................................................................................................... 8
General description................................................................................................................................................................ 9
1.1
General information .................................................................................................................. 9
1.2
Functional description ............................................................................................................ 10
1.2.1
RF functionalities.......................................................................................................... 11
1.2.2
Baseband functionalities .............................................................................................. 11
1.3
Firmware................................................................................................................................. 12
Interfaces ..............................................................................................................................................................................13
2.1
General Purpose Connector (GPC) ....................................................................................... 13
2.2
Power supply .......................................................................................................................... 14
2.2.1
General description ...................................................................................................... 14
2.2.2
Power consumption...................................................................................................... 15
2.3
Electrical information for digital I/O......................................................................................... 17
2.4
LCD interface.......................................................................................................................... 18
2.4.1
SPI bus 18
2.4.2
Two-wire interface ........................................................................................................ 18
2.5
SPI Auxiliary bus .................................................................................................................... 18
2.6
Keyboard interface ................................................................................................................. 19
2.7
Main serial link (UART1) ........................................................................................................ 20
2.8
Auxiliary serial link (UART2)................................................................................................... 20
2.9
SIM interface .......................................................................................................................... 21
2.9.1
General Description...................................................................................................... 21
2.9.2
SIM 3/5V management................................................................................................. 22
2.10
General Purpose Input/Output ............................................................................................... 23
confidential ©
Page : 3 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
2.11
Activity status indication ......................................................................................................... 23
2.12
Analog to Digital Converter (ADC) ......................................................................................... 24
2.13
Audio interface 25
2.13.1
Microphone inputs ........................................................................................................ 25
2.13.1.1
Common microphone inputs characteristics ........................................................ 25
2.13.1.2
Main Microphone Inputs (MIC2) ........................................................................... 27
2.13.1.3
Auxiliary Microphone Inputs (MIC1) ..................................................................... 27
2.13.2
Speaker outputs ........................................................................................................... 28
2.13.2.1
Common speaker outputs characteristics ............................................................ 28
2.13.2.2
Speaker 2 Outputs................................................................................................ 29
2.13.2.3
Speaker 1 Outputs................................................................................................ 29
2.13.3
Buzzer Output .............................................................................................................. 29
2.14
Battery charging interface ...................................................................................................... 30
2.14.1
Hardware description ................................................................................................... 30
2.14.2
Li-ion charging procedure............................................................................................. 31
2.15
ON / ~OFF
...................................................................................................................... 32
2.15.1
General description ...................................................................................................... 32
2.15.2
Operating sequences ................................................................................................... 33
2.15.2.1
Power ON ............................................................................................................. 33
2.15.2.2
Power OFF ........................................................................................................... 34
2.16
BOOT (optional) ..................................................................................................................... 34
2.17
Reset signal (~RST) ............................................................................................................... 35
2.17.1
General description ...................................................................................................... 35
2.17.2
Reset sequence ........................................................................................................... 36
2.18
External Interrupt (~INTR) ...................................................................................................... 36
2.19
VCC output
2.20
Real Time Clock Supply (VCC_RTC)..................................................................................... 37
...................................................................................................................... 37
2.21
RF interface
...................................................................................................................... 37
2.21.1
RF connections ............................................................................................................ 38
2.21.1.1
General ................................................................................................................. 38
2.21.1.2
Antenna directly connected to the module: matching circuit ................................ 38
2.21.2
RF performances.......................................................................................................... 40
2.21.3
Antenna specifications ................................................................................................. 40
Technical specifications ...................................................................................................................................................42
3.1
General Purpose Connector pin out description .................................................................... 42
3.2
Environmental Specifications ................................................................................................. 46
3.3
Mechanical specifications....................................................................................................... 47
3.3.1
Physical characteristics ................................................................................................ 47
3.3.2
Mechanical drawings.................................................................................................... 47
Appendix ..................................................................................................................................................................................49
4.1
Wavecom acceptance test ..................................................................................................... 49
4.2
GSM Standard and Recommendations ................................................................................. 49
4.3
Safety recommendations (for information only) ..................................................................... 52
4.3.1
RF safety ...................................................................................................................... 52
confidential ©
Page : 4 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
General ................................................................................................................. 52
4.3.1.1
4.3.1.2
Exposure to RF energy......................................................................................... 52
4.3.1.3
Efficient terminal operation ................................................................................... 52
4.3.1.4
Antenna care and replacement ............................................................................ 52
4.3.2
General safety .............................................................................................................. 53
4.3.2.1
Driving................................................................................................................... 53
4.3.2.2
Electronic devices................................................................................................. 53
4.3.2.3
Vehicle electronic equipment................................................................................ 53
4.3.2.4
Medical electronic equipment ............................................................................... 53
4.3.2.5
Aircraft .................................................................................................................. 54
4.3.2.6
Children ................................................................................................................ 54
4.3.2.7
Blasting areas ....................................................................................................... 54
4.3.2.8
Potentially explosive atmospheres ....................................................................... 54
4.4
General Purpose Connector data sheet................................................................................. 57
confidential ©
Page : 5 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
Caution
Information furnished herein by Wavecom are accurate and reliable. However no responsibility is
assumed for its use. Please read carefully the safety precautions for a terminal based on WISMO
Quik Q2400 Series.
General information about Wavecom and its range of products is available at the following internet
address: http://www.wavecom.com
Trademarks
Some mentioned products are registered trademarks of their respective companies.
confidential ©
Page : 6 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
Overview
This document defines and specifies the WISMO QUIK Q24x6 Series, available under two
GSM/GPRS Class 10 dual-band versions:
•
Q2406A: E-GSM/GPRS 900/1800 MHz version with 16 Mbits of Flash memory and 2 Mbits
of SRAM (16/2).
•
Q2406B: E-GSM/GPRS 900/1800 MHz version with 32 Mbits of Flash memory and 4 Mbits
of SRAM (32/4).
•
Q2406D: E-GSM/GPRS 900/1800 MHz version with 64 Mbits of Flash memory and 8 Mbits
of SRAM (64/8). This configuration will be available for handset application and vertical
application where UART2 is not used.
•
Q2406E: E-GSM/GPRS 900/1800 MHz version with 64 Mbits of Flash memory and 4 Mbits
of SRAM (64/4). This configuration will be available for handset application and vertical
application where UART2 is not used.
•
Q2426A: GSM/GPRS 850/1900 MHz version with 16 Mbits of Flash memory and 2 Mbits of
SRAM (16/2).
•
Q2426B: GSM/GPRS 850/1900 MHz version with 32 Mbits of Flash memory and 4 Mbits of
SRAM (32/4).
•
Q2426D: GSM/GPRS 850/1900 MHz version with 64 Mbits of Flash memory and 8 Mbits of
SRAM (64/8). This configuration will be available for handset application and vertical
application where UART2 is not used.
•
Q2426E: GSM/GPRS 850/1900 MHz version with 64 Mbits of Flash memory and 4 Mbits of
SRAM (64/4). This configuration will be available for handset application and vertical
application where UART2 is not used.
Note: the WISMO Q24x6 module is an evolution of the Q2403 module with which it is fully hardware
and software compatible (except for power consumption).
confidential ©
Page : 7 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
Reference documents
[1]
WISMO Quik Q2400 Series Customer Design Guidelines
WM_PRJ_Q2400_PTS_005
[2]
WISMO Quik Q2400 Series Manufacturing Guide
WM_PRJ_Q2400_PTS_006
[3]
AT Commands Interface Guide
WM_ASW_OAT_UGD_004
[4]
Wavecom Acceptance and Verification Plan
WAVE Plan, Release 1.4
[5]
Q2406 or Q2426 delta with the Q2403
WM_PRJ_Q2400_PTS_004
confidential ©
Page : 8 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
General description
1.1
General information
WISMO Quik Q24x6 sub-series is a range of self-contained E-GSM/GSM-GPRS 900/1800 or
850/1900 dual-band modules including the following features:
•
•
•
•
•
•
•
•
•
•
•
•
58.4 x 32.2 x 3.9 mm.
2 Watts E-GSM 900/GSM 850 radio section running under 3.6 Volts.
1 Watt GSM1800/1900 radio section running under 3.6 Volts.
Digital section running under 2.8 Volts.
3V only SIM interface (for 5 V SIM interface with external adaptation, refer to document [1]).
Real Time Clock with calendar.
Battery charge management.
Echo Cancellation + noise reduction.
Full GSM or GSM/GPRS software stack.
Hardware GPRS class 10 capable.
Complete shielding.
Complete interfacing through a 60-pin connector:
o Power supply,
o Serial link,
o Audio,
o SIM card interface,
o Keyboard,
o LCD (not available with AT commands).
WISMO Quik Q24x6 sub-series has two external connections:
•
•
RF connection pads (to the antenna),
60-pin General Purpose Connector (GPC) to Digital, Keyboard, Audio and Supply.
WISMO Quik Q24x6 sub-series is designed to fit in very small terminals and only some custom
functions have to be added to make a complete dual-band solution:
•
•
•
•
•
•
Keypad and LCD module,
Earpiece and Microphone,
Base connector,
Battery,
Antenna,
SIM connector.
confidential ©
Page : 9 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
1.2
Functional description
Po w er S u p p ly
RF In t er f ac e
RF
I/O Co n t r o ller
B at t er y
M an ag em en t
A /D Co n v er t er
SIM S u p p ly
SIM Co n t r o ller
RF
CPU
FLA S H
M em o r y
M an ag em en t
U n it
SRA M
R.T .C
G PSI o r SPI
Co n t r o ller
A u d io In t er f a c e
V o c o d er
Key b o a r d
Co n t r o ller
U A RT 1 & 2
Figure 1: Functional architecture
confidential ©
Page : 10 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
1.2.1
RF functionalities
The Radio Frequency (RF) functionalities comply with the Phase II E-GSM 900/DCS 1800 and GSM
850/PCS 1900 recommendation.
The frequencies are:
Q2406
•
Rx (E-GSM 900): 925 to 960 MHz.
•
Rx (DCS 1800): 1805 to 1880 MHz.
•
Tx (E-GSM 900): 880 to 915 MHz.
•
Tx (DCS 1800): 1710 to 1785 MHz.
Q2426
•
Rx (GSM 850): 869 to 894 MHz.
•
Rx (PCS 1900): 1930 to 1990 MHz.
•
Tx (GSM 850): 824 to 849 MHz.
•
Tx (PCS 1900): 1850 to 1910 MHz.
The Radio Frequency (RF) part is based on a specific dual band chip including :
•
•
•
•
•
•
1.2.2
Low-IF Receiver,
Dual RF (Radio Frequency) synthesizer,
Digital IF to Baseband Converter,
Offset PLL (Phase Lock Loop) transmitter,
1 (logarithmic) Power Amplifier (PA) controller,
Dual band Power Amplifier (PA) module.
Baseband functionalities
The digital part of the WISMO Quik Q24x6 sub-series is based on a PHILIPS-VLSI chip (ONE C
GSM/GPRS Kernel).
This chipset is using a 0.25 µm mixed technology CMOS, which allows massive integration as well
as low current consumption.
confidential ©
Page : 11 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
1.3
Firmware
WISMO Quik Q24x6 sub-series is designed to be integrated into various types of applications such
as handsets or vertical applications (telemetry, multimedia,…).
For vertical applications, the firmware offers a set of AT commands to control the module (for further
information, refer to document [3]).
Please be aware that some of these interfaces can not be handled when using the WISMO
Quik Q24x6 sub-series driven by AT commands: LCD interface, auxiliary serial link interface
and SPI bus.
AT
This symbol is used to indicate the interfaces not available with AT commands.
These functions have then to be managed externally i.e using the main processor of the
application.
confidential ©
Page : 12 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
2 Interfaces
Note:
Some of the WISMO interface signals are multiplexed in order to limit number of pins but this
architecture implies some limitation.
For example, in case of using SPI bus, 2-wire bus cannot be used.
Warning:
All external signals must be inactive when the WISMO module is OFF to avoid any damage
when starting and allow WISMO module to start correctly.
2.1
General Purpose Connector (GPC)
A 60-pin connector, with 0.5 mm pitch, is provided to interface the WISMO Quik Q24x6 sub-series
with a board containing either a LCD module, or a keyboard, or a SIM connector, or a battery
connection...
The interfaces available on the GPC are described in the next paragraphs.
The GPC is made by KYOCERA / AVX group with the following reference:
14 5087 060 930 861.
The matting connector has the following reference:
24 5087 060 X00 861.
For further details, refer to paragraph 4.4 General Purpose Connector data sheet.
confidential ©
Page : 13 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
2.2
Power supply
2.2.1
General description
The power supply is one of the key issues in the design of a GSM terminal. Due to the bursted
emission in GSM / GPRS, the power supply must be able to deliver high current peaks in a short
time. During these peaks the ripple (Uripp) on the supply voltage must not exceed the limits specified
in table “Power Supply Voltage” hereafter.
In communication mode, a GSM/GPRS class 2 terminal emits 577 µs radio bursts every 4.615 ms.
In communication mode, a GPRS class 10 terminal emits 1154 µs radio bursts every 4.615 ms.
V m ax
V B A T T (1 )
U r ip p
U r ip p
V m in
IB A T T
t = 5 7 7 µs
(1 )
o r V D D if c o n n ec t ed t o VB A T T
T = 4 .6 1 5 m s
Figure 2: Typical power supply voltage in GSM mode
Two different inputs are provided for the power supply:
•
the first one, VBATT is used to supply the RF part,
•
the second one, VDD is used to supply the baseband part.
Notes:
•
It is possible to connect VBATT to VDD.
•
In case of separate power supplies, they have to be in the same state i.e both active or
inactive at the same time.
VBATT: supplies directly the RF components with 3.6 V. It is essential to keep a minimum voltage
ripple at this connection in order to avoid any phase error. The RF Power Amplifier current (2.0 A
peak in GSM /GPRS mode with a 50 Ohms RF output flows with a ratio of:
•
1/8 of the time (around 577 µs every 4.615 ms for GSM/GPRS class 2),
•
2/8 of the time (around 1154 µs every 4.615 ms for GSM/GPRS class 10).
The rising time is around 10 µs.
VDD: supplies the +2.8 V ballast regulators of the WISMO module. It is essential to keep the voltage
over 3.1 volts.
The WISMO module shielding case is the grounding. The ground has to be connected on the mother
board through a complete layer on the PCB.
confidential ©
Page : 14 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
Power Supply Voltage
VBATT
VMIN
VNOM
VMAX
Ripple max (Uripp)
3.3 V (*)
3.6 V
4.5 V (**)
50 mVpp for freq<200 kHz
500 µVpp for freq>200 kHz
VDD
3.1 V
4.5 V
100 mVpp
(*): This value has to be guaranteed during the burst (with 2.0 A Peak in GSM or GPRS mode).
(**): max operating Voltage Stationary Wave Ratio (VSWR) 2:1.
When supplying the module with a battery, the total impedance (battery+contacts+protections+PCB)
should be < 150 mOhms to limit voltage drop-out within emission burst.
Refer to document [1] for further information about power supply design.
2.2.2
Power consumption
The following information is given assuming a 50 Ω RF output.
Power consumption in OFF mode
(module supplied, OFF state, no software running)
Overall consumption
Conditions
INOM
IMAX
Off
5 µA
10 µA
VBATT + VDD
confidential ©
Page : 15 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
Power consumption in E-GSM/GPRS 900 MHz and GSM/GPRS 850 MHz mode
class 10
VBATT+VDD
Conditions
INOM
IMAX
During TX bursts @Pcl5
1.60 A peak
1.8 A peak
During RX bursts
110 mA peak
115 mA peak
Average 1Rx/1Tx @Pcl5
250 mA
300 mA
Average 1Rx/1Tx @Pcl8
190 mA
200 mA
Average GPRS Cl 10 (3Rx/2Tx)
@Pcl5
400 mA
510 mA
Average GPRS Cl 10 (3Rx/2Tx)
@Pcl8
260 mA
300 mA
Average Idle mode
3 mA
7 mA
Power Control Level: Pcl5=2 W typ.; Pcl8=0.5 W typ.
Power consumption in GSM/GPRS 1800 MHz and
GSM/GPRS 1900 MHz mode class 10
VBATT+VDD
Conditions
INOM
IMAX
During TX bursts @Pcl0
1 A peak
1.5 A peak
During RX bursts
130 mA peak
140 mA peak
Average 1Rx/1Tx @Pcl0
190 mA
235 mA
Average 1Rx/1Tx @Pcl3
150 mA
180 mA
Average GPRS Cl 10 (3Rx/2Tx)
@Pcl0
320 mA
410 mA
Average GPRS Cl 10 (3Rx/2Tx)
@Pcl3
240 mA
270 mA
Average Idle mode
2 mA
6.5 mA
Power Control Level: Pcl0=1 W typ.; Pcl3=0.25 W typ.
Power Supply Pinout
Signal
Pin number
+VBATT
55, 57, 58, 59, 60
VDD
11
GND
Shielding
The ground connection is done through the shielding
ground plane.
the four legs have to be soldered to the
confidential ©
Page : 16 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
2.3
Electrical information for digital I/O
All digital I/O comply with 3 Volts CMOS.
Operating conditions
Parameter
I/O type
Min
Max
VIL
CMOS
-0.5 V
0.8 V
VIH
CMOS
2.1 V
3.0 V
VOL
1X
0.2 V
IOL = -1 mA
2X
0.2 V
IOL = -2 mA
3X
0.2 V
IOL = -3 mA
VOH
Condition
1X
2.6 V
IOH = 1 mA
2X
2.6 V
IOH = 2 mA
3X
2.6 V
IOH = 3 mA
confidential ©
Page : 17 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
2.4
LCD interface
The WISMO Quik Q24x6 sub-series can be connected to a LCD module driver through either a SPI
bus or a two-wire interface.
2.4.1
SPI bus
The SPI bus includes a CLK signal (SPI_CLK), an I/O signal (SPI_IO) and an EN signal (SPI_EN)
complying with SPI bus standard.
Pin description
Signal
Pin number
I/O
I/O type
SPI_CLK
10
1X
SPI_IO
I/O
CMOS / 1X
SPI_EN *
28
1X
Description
SPI Serial Clock
SPI Data
SPI Enable
* Multiplexed with GPO3.
2.4.2
AATT
Two-wire interface
The two-wire interface includes a CLK signal (SCL) and a DATA signal (SDA) complying with a
standard 96 kHz interface. The maximum speed transfer is 400 kbits/s.
Pin description
2.5
Signal
Pin number
I/O
I/O type
Description
SCL
10
1X
Serial Clock
SDA
I/O
CMOS / 1X
Serial Data
SPI Auxiliary bus
A second SPI Chip Enable (called SPI_AUX) has to be used to add a SPI peripheral to the WISMO
Quik Q24x6 sub-series.
Pin description
Signal
Pin number
I/O
I/O type
SPI_CLK
10
1X
SPI_IO
I/O
CMOS / 1X
SPI_AUX *
26
1X
Description
SPI Serial Clock
SPI Data
SPI Aux. Enable
* Multiplexed with GPO0.
confidential ©
Page : 18 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
2.6 Keyboard interface
Warning:
This interface is not FULLY available with AT commands:
An AT command allows to get the input key code (see AT+CMER command description). This
code has then to be processed by the application.
This interface provides 10 connections:
•
5 rows (ROW0 to ROW4),
•
5 columns (COL0 to COL4).
The scanning is a digital one, and the debouncing is done in the WISMO module. No discrete
components like R, C (Resistor, Capacitor) are needed.
Pin description
Signal
Pin number
I/O
I/O type
Description
ROW0
13
I/O
CMOS / 1X
Row scan
ROW1
15
I/O
CMOS / 1X
Row scan
ROW2
17
I/O
CMOS / 1X
Row scan
ROW3
19
I/O
CMOS / 1X
Row scan
ROW4
21
I/O
CMOS / 1X
Row scan
COL0
23
I/O
CMOS / 1X
Column scan
COL1
25
I/O
CMOS / 1X
Column scan
COL2
27
I/O
CMOS / 1X
Column scan
COL3
29
I/O
CMOS / 1X
Column scan
COL4
31
I/O
CMOS / 1X
Column scan
confidential ©
Page : 19 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
2.7
Main serial link (UART1)
A flexible 6-wire serial interface is available complying with V24 protocol signaling but not with V28
(electrical interface) due to a 2.8 Volts interface.
The signals are:
•
TX data (CT103/TX),
•
RX data (CT104/RX),
•
Request To Send (CT105/RTS),
•
Clear To Send (CT106/CTS),
•
Data Terminal Ready (CT108-2/DTR),
•
Data Set Ready (CT107/DSR).
The set of serial link signals can be required for GSM DATA services application and is generated
by the general purpose I/O provided by the WISMO module.
The 2 additional signals are Data Carrier Detect (CT109/DCD) and Ring Indicator (CT125/RI).
Pin description
Signal
Pin number
I/O
I/O type
Description
CT103/TXD1
39
CMOS
Transmit serial data
CT104/RXD1
32
1X
Receive serial data
CT105/RTS1
30
CMOS
CT106/CTS1
37
1X
Clear To Send
CT107/DSR1
36
1X
Data Set Ready
CT108-2/DTR1
34
CMOS
CT109/DCD1 *
51
CMOS / 2X
Data Carrier Detect
CT125/RI1 **
54
CMOS / 2X
Ring Indicator
CT102/GND
Shielding legs
Request To Send
Data Terminal Ready
Ground
* Multiplexed with GPIO3
** Multiplexed with GPIO2.
The rising time and falling time of the reception signals (mainly CT103) have to be less than 200 ns.
The WISMO Quik Q24x6 sub-series has been designed to be operated using all the serial interface
signals. In particular, it is necessary to use RTS and CTS signals for hardware flow control in order
to avoid data corruption during transmission.
2.8
Auxiliary serial link (UART2)
For future applications (e.g. Bluetooth connectivity) an auxiliary serial interface (UART2) will be
available on Q24x6A and Q24x6B products.
confidential ©
Page : 20 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
Warning:
The auxiliary serial link (UART2) is not available on Q24x6D and Q24x6E products (version
with 64 Mbits of Flash memory).
Pin description
Signal
Pin
I/O
I/O type
Description
Multiplexed
with
number
CT103 / TXD2
18
3X
Receive serial data
GPI
CT104 / RXD2
20
CMOS
Transmit serial data
GPO2
CT106 / CTS2
24
CMOS
Clear To Send
GPIO0
CT105 / RTS2
35
2X
Request To Send
GPIO5
2.9
SIM interface
2.9.1
General Description
5 signals are available:
•
•
•
•
•
SIM_VCC: SIM power supply.
SIM_RST: reset.
SIM_CLK: clock.
SIM_DATA: I/O port.
SIM_PRES: SIM card detect.
The SIM interface controls a 3 V SIM card (and a 5 V SIM card through an external SIM driver, refer
to document [1] for more details).
This interface is fully compliant with GSM 11.11 recommendations concerning SIM functions.
Pin description
Signal
Pin number
I/O
I/O type
Description
SIM_CLK
2X
SIM Clock
SIM_RST
2X
SIM Reset
SIM_DATA
I/O
CMOS / 3X
SIM Data
SIM_VCC
SIM_PRES
50
SIM Power Supply
CMOS
SIM Card Detect
confidential ©
Page : 21 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
Electrical Characteristics
Parameter
Conditions
SIM_DATA VIH
IIH = ± 20 µA
SIM_DATA VIL
IIL = 1 mA
SIM_RST,
Source current =
20 µA
SIM_DATA
Min
Typ
Max
0.7xSIM_VCC
Unit
0.3xSIM_VCC
SIM_VCC – 0.1V
SIM_CLK VOH
SIM_RST,
SIM_DATA
Sink current =
-200 µA
0.1
2.85
SIM_CLK VOL
SIM_VCC* Output
Voltage
ISIMVCC <= 6 mA
SIM_CLK
Rise/Fall Time
Loaded with 30 pF
50
ns
SIM_RST,
SIM_DATA
Rise/Fall Time
Loaded with 30 pF
µs
SIM_CLK
Frequency
Loaded with 30 pF
3.25
MHz
2.70
2.80
(*): given for a 3 V interface. An external SIM driver is needed to handle 5 V SIMs.
Note for SIM_PRES connection:
•
When not used SIM_PRES has to be tied to VCC.
•
When used, a low to high transition means that the SIM card is inserted and a high to low
transition means that the SIM card is removed.
2.9.2
SIM 3/5V management
The WISMO Quik Q24x6 sub-series module is designed to interface with 3 V SIMs only1.
Nevertheless, it is possible to manage 3 V and 5 V SIM cards using an external level shifter (refer to
customer design guidelines [1]). In this case, depending on the type of SIM detected, the module
firmware triggers the GPO0 output signal (pin #26) in order to properly set the external SIM driver
level (3V or 5V).
Most of the GSM operators have been providing 3 V SIMs since 1998.
confidential ©
Page : 22 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
2.10 General Purpose Input/Output
The WISMO Quik Q24x6 sub-series provides:
•
6 General Purpose I/O,
•
4 General Purpose Outputs,
•
1 General Purpose Input.
They are used to control any external device such as a LCD or a Keyboard backlight.
Pin description
Signal
AATT
Pin
number
I/O
I/O type
Description
Multiplexed with
GPIO0
24
I/O
CMOS / 2X
General Purpose I/O
GPIO4
53
I/O
CMOS / 2X
General Purpose I/O
GPIO5
35
I/O
CMOS / 2X
General Purpose I/O
CT105/RTS2
GPO0
26
3X
General Purpose O
SPI_AUX
GPO1
22
3X
General Purpose O
GPO2
20
1X
General Purpose O
CT104/RXD2
GPI
18
CMOS
General Purpose I
CT103/TXD2
GPO3
28
CMOS
General Purpose O
SPI_EN
CT106/CTS2
The following GPIOs are not available (reserved) in case of module running with the AT commands
firmware:
Signal
Pin
number
I/O
I/O type
Description
Multiplexed with
GPIO1
52
I/O
CMOS / 2X
General Purpose I/O
FLASH LED(*)
GPIO2
54
I/O
CMOS / 2X
General Purpose I/O
CT125/RI1
GPIO3
51
I/O
CMOS / 2X
General Purpose I/O
CT109/DCD1
(*) The FLASH LED signal can be used to drive a LED through an open-collector transistor
according to the module activity status.
2.11
Activity status indication
The activity status indication signal can be used to drive a LED through an open-collector transistor
according to the module activity status.
confidential ©
Page : 23 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
LED status
WISMO Quik Q24x6 sub-series status
OFF
Module in download mode or module OFF
ON
Permanent
Module switched ON, not registered on the network
Slow flash
Module switched ON, registered on the network
LED ON for 200 ms, OFF
for 2 s
Quick flash
Module switched ON, registered on the network,
LED ON for 200 ms, OFF communication in progress
for 600 ms
Signal
Pin number
I/O
I/O type
FLASH LED
52
I/O
CMOS / 2X
Description
General Purpose I/O
2.12 Analog to Digital Converter (ADC)
An Analog to Digital Converter is provided by the WISMO module. This converter is a 10-bit
resolution, ranging from 0 to 2.8 V.
Pin description
Signal
Pin number
I/O
I/O type
Description
AUXV0
33
Analog
A/D converter
Electrical Characteristics
Parameter
Min
Resolution
Sampling rate
Input signal range
Max
Unit
10
bits
90.3
Ksps/s
2.8V
ADC Reference Accuracy
0.75
Integral Accuracy
+/- 1
LSB
Differential Accuracy
+/- 1
LSB
Input Impedance ( R )
10
MΩ
Input Impedance ( C )
100
nF
confidential ©
Page : 24 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
2.13 Audio interface
Two different microphone inputs and two different speaker outputs are supported.
The WISMO Quik Q24x6 sub-series also includes an echo cancellation feature which allows handsfree function.
In some case, ESD protection must be added on the audio interface lines.
2.13.1
Microphone inputs
The MIC2 inputs already include the biasing for an electret microphone allowing an easy connection
to a handset.
The MIC1 inputs do not include an internal bias. MIC1/SPK1 is then appropriate for a hands-free
system or a handset with biasing external to the module.
2.13.1.1
Common microphone inputs characteristics
The connection can be either differential or single-ended but using a differential connection in order
to reject common mode noise and TDMA noise is strongly recommended. When using a singleended connection, be sure to have a very good ground plane, a very good filtering as well as
shielding in order to avoid any disturbance on the audio path.
Internal audio filter characteristics
Frequency
Gain
0-150 Hz
< -22 dB
150-180 Hz
< -11 dB
180-200 Hz
< -3 dB
200-3700 Hz
0 dB
>4000 Hz
< -60 dB
The gain of MIC inputs is internally adjusted and can be tuned from 30 dB to 51 dB using an AT
command (refer to AT commands documentation [3]).
confidential ©
Page : 25 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
Microphone gain vs Max input voltage (using controller 1*)
Transmit Gain (dB)
Max Vin (mVrms)
+30
43.80
+33
31.01
+36
21.95
+39
15.54
+42
11
+45
7.79
+48
5.51
+51
3.9
(*) for more details, refer to AT commands documentation [3]
Microphone gain vs Max input voltage (using controller 2*)
Transmit Gain (dB)
Max Vin (mVrms)
- 6.5
3031
-6.0
2861
…
…
0.0
1434
…
…
+9.5
480
+10.0
454
+ 30.3
43.80
+ 30.8
41.36
…
…
+ 50.8
4.14
+ 51.3
3.90
(*) for more details, refer to AT commands documentation [3]
confidential ©
Page : 26 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
2.13.1.2
Main Microphone Inputs (MIC2)
The MIC2 inputs are differential ones. They already include the convenient biasing for an electret
microphone (0.5 mA and 2 Volts). This electret microphone can be directly connected on these
inputs.
The impedance of the microphone 2 has to be around 2 kΩ. These inputs are the standard ones for
an handset design while MIC1 inputs can be connected to an external headset or a hands-free kit.
AC coupling is already embedded in the module.
Pin description
Signal
Pin #
I/O
I/O type
Description
MIC2P
46
Analog
Microphone 2 positive input
MIC2N
48
Analog
Microphone 2 negative input
2.13.1.3
Auxiliary Microphone Inputs (MIC1)
The MIC1 inputs are differential and do not include internal bias. To use these inputs with an electret
microphone, bias has to be generated outside the WISMO Quik Q24x6 sub-series module according
to the characteristic of this electret microphone. These inputs are the standard ones used for an
external headset or a hands-free kit.
The impedance of the microphone 1 has to be around 2 kΩ. These inputs are provided for an
external headset or a hands-free kit.
AC coupling is already embedded in the module.
Pin description
Signal
Pin #
I/O
I/O type
Description
MIC1P
42
Analog
Microphone 1 positive input
MIC1N
44
Analog
Microphone 1 negative input
confidential ©
Page : 27 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
2.13.2
Speaker outputs
2.13.2.1
Common speaker outputs characteristics
The connection can be differential or single-ended but using a differential connection to reject
common mode noise and TDMA noise is strongly recommended. Morover in single-ended mode, ½
of the power is lost. When using a single-ended connection, be sure to have a very good ground
plane, a very good filtering as well as shielding in order to avoid any disturbance on the audio path.
Speaker outputs SPK1 and SPK2 are push-pull amplifiers and can be loaded down to 150 Ohms
and up to 1 nF (see details in table Speaker gain vs Max output voltage).
Impedance
of
the
speaker
amplifier
R ≤ 1Ω +/-10 %.
output
in
differential
mode
is :
These outputs are differential and the output power can be adjusted by step of 2 dB. The output can
be directly connected to a speaker.
Using a single-ended connection also includes losing half of the output power compared to a
differential connection.
The gain of the speaker outputs is internally adjusted and can be tuned using an AT command.
Speaker gain vs Max output voltage
Receive Gain (dB) (*)
Max output level (Vrms)
Max.speaker load (Ω)
+2
1.74
150
1.38
50
-2
1.099
32
-4
0.873
32
-6
0.693
32
-8
0.551
32
-10
0.437
32
-12
0.347
32
-14
0.276
32
-16
0.219
32
-18
0.174
32
-20
0.138
32
-22
0.110
32
-24
0.087
32
0.069
32
-26
(*) analog gain: might not be significant
confidential ©
Page : 28 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
2.13.2.2
Speaker 2 Outputs
Pin description
2.13.2.3
Signal
Pin #
I/O
I/O type
Description
SPK2P
45
Analog
Speaker 2 positive output
SPK2N
47
Analog
Speaker 2 negative output
Speaker 1 Outputs
Pin description
2.13.3
Signal
Pin #
I/O
I/O type
Description
SPK1P
41
Analog
Speaker 1 positive output
SPK1N
43
Analog
Speaker 1 negative output
Buzzer Output
The buzzer output (BUZ) is a digital one. A buzzer can be directly connected between this output
and VBATT. The maximum current is 80 mA (PEAK).
Pin description
Signal
Pin #
I/O
I/O type
Description
BUZ
49
Analog
Buzzer output
(open collector)
Operating conditions
Parameter
Condition
VOL
Min
Max
Unit
IAVERAGE = 40 mA
0.6
IPEAK
VBATT = VBATTmax
80
mA
IAVERAGE
VBATT = VBATTmax
40
mA
confidential ©
Page : 29 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
2.14 Battery charging interface
2.14.1
Hardware description
The WISMO module supports one battery charging circuit for Li-Ion batteries.
This circuit uses an interface which consists of a current source inputs (CHG_IN) where the constant
current has to flow in order to charge the battery.
This current value depends on the battery capacity. It is recommended to provide a current equal to
the value of the capacity plus 50 mA. For a 550 mA battery the current will be 600 mA. The
maximum current is 800 mA.
A specific AT command (AT+WBCM), available from 4.3 level, allows to manage the battery charge
(start and stop the charge, enable or disable unsolicited Battery Charge Indications and set the
battery charge parameters).
The WISMO module monitors the battery voltage to detect the end of the charge.
The WISMO module also monitors the temperature of the battery through the BAT_TEMP pin which
has to be connected to a temperature sensor inside the battery (a NTC resistor for instance).
Pin description
Signal
Pin number
I/O
I/O type
Description
CHG_IN
1, 2, 4
Supply
Current source input
BAT_TEMP
38
Analog
A/D converter
confidential ©
Page : 30 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
Electrical Characteristics
Parameter
Min
BAT_TEMP resolution
CHG_IN Current
BAT_TEMP Input signal range
Ksps/s
4.7
5.1*
Unit
bits
90.3
BAT_TEMP Input Impedance ( C )
CHG_IN Voltage (for I=Imax)
Typ
10
BAT_TEMP sampling rate
BAT_TEMP Input Impedance ( R )
Max
kΩ
100
nF
5.5
800
mA
2.8
Vpp
* To be parametrized as per battery manufacturer
2.14.2
Li-ion charging procedure
A constant current source has to be provided through CHG_IN inputs in order to charge the Li-ion
battery, and BAT_TEMP input has to be connected to a battery temperature sensor. During this
procedure the voltage of the battery is accurately monitored.
The Li-ion charging involves two phases:
•
During the first phase, the battery is charged with a constant current until its voltage reaches
4.1 V*,
•
During the second phase, the constant current is pulsed by the module. The width and the
frequency of the pulse change during this phase in order to ensure a safety charge.
The battery is considered as fully charged when, after a pulse, the voltage remains at a 4.1 V*
during more than 10 s.
The Li-ion battery must have an included safety circuit to avoid any discharge or overcharge. This
circuit is delivered by the manufacturer inside the battery pack. The impedance of this safety circuit
has to be the lowest possible in order to reduce the drop-out of the voltage. This drop-out is due to
the RF Power Amplifier current (up to 2.0 A). A maximum of 150 mΩ is required.
(*): To be parametrized as per battery manufacturer
confidential ©
Page : 31 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
2.15 ON / ~OFF
2.15.1
General description
This input is used to switch ON or OFF the WISMO module.
A high level signal has to be provided on the pin ON/~OFF to switch ON the module.
The level of the voltage of this signal has to be maintained between 2.4 V and VDD during a
minimum of 1 s.
This signal can be left at high level until switch OFF.
To be able to switch OFF the module, the pin ON/~OFF has to be released. Through the firmware,
the module can be switched OFF (using the AT+CPOF command).
Pin description
Signal
Pin number
I/O
I/O type
Description
ON/∼OFF
CMOS
Module Power ON/OFF
Electrical Characteristics
Parameter
Min
Input Impedance ( R )
10
Max
Unit
kΩ
Input Impedance ( C )
50
pF
Operating conditions
Parameter
I/O type
Min
Max
Unit
VIL
0V
0.6 V
VIH
2.4 V
VDD+0.5 V
confidential ©
Page : 32 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
2.15.2
2.15.2.1
Operating sequences
Power ON
Once the module is supplied by the power source, the application must set the ON/~OFF signal to
high to start the module power ON sequence.
The ON/~OFF signal must be held for 1 s minimum. After this time, an internal mechanism keeps it
on hold. During the power ON sequence, an internal reset is automatically performed by the module
for 240 ms (typical). During this phase, any external reset should be avoided.
Once the initialisation is complete (timing is SIM and network dependent) the AT interface answers
« OK » to the application2. For further details, please refer to the AT commands documentation
(AT+WIND, AT+WAIP)
POW ER SUPPLY
ON /~OFF
T on /o ff-h o ld
(1 s m in )
IN T ERN A L RST
T rst
(2 4 0 m s t y p )
A T an sw ers « OK »
ST A T E OF T H E M OD ULE
M o d u le OFF
RESET m o d e
I B B+ RF < 1 0 µA
I B B+ RF= 2 0 t o 4 0 m A
M o d u le ON
I B B+ RF< 1 2 0 m A
(n o lo c . u p d at e)
M o d u le REA D Y
SIM an d N et w o rk d ep en d en t
I B B + RF = ov erall cu rren t co n su m p t io n (Base B an d + RF p art )
Figure 3: Power-ON sequence diagram (no PIN code activated)
For this, the application has to send AT↵. If the application manages hardware flow control, the AT command can be sent
during the initialisation phase. Another solution is to use the AT+WIND command to get an unsolicited status from the
module.
confidential ©
Page : 33 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
2.15.2.2
Power OFF
To properly power OFF the module, the application must set the ON/~OFF signal to low and then
send the AT+CPOF command to de-register from the network and switch off the module. Once the
« OK » response is issued by the module, the power supply can be switched off.
PO W ER SU PPLY
O N /~O FF
A T + CPO F
A T CO M M A N D
O K res p o n s e
N et w o rk d ep en d en t
ST A T E O F T H E M O D U LE
M o d u le O FF
M o d u le
REA D Y
I B B + RF < 1 0 0 µA
I B B + RF = o v era ll c u rren t c o n su m p t io n (B a s e B a n d + RF p a rt )
Figure 4: Power-OFF sequence diagram
2.16 BOOT (optional)
This input can be used to download a software in the Flash memory of the WISMO module.
For the applications based on AT commands, this is a backup download procedure only (refer to
document [1] Customer Design Guidelines).
The internal boot procedure is started when this pin is low during the reset of the module.
In normal mode this pin has to be left open. In Internal boot mode, low level has to be set through a
1KΩ resistor. If used, this input has to be driven by an open collector or an open drain output:
•
BOOT pin 12 = 0, for download mode,
•
BOOT pin 12 = 1, for normal mode.
Pin description
Signal
Pin number
I/O
I/O type
Description
BOOT
12
CMOS
Flash Downloading
Note : The nominal firmware download procedure is using the X-modem
confidential ©
Page : 34 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
2.17 Reset signal (~RST)
2.17.1
General description
This signal is used to force a reset procedure by providing low level during at least 500 µs.
This signal has to be considered as an emergency reset only. A reset procedure is automatically
driven by an internal hardware during the power-up sequence.
This signal can also be used to provide a reset to an external device. It then behaves as an output. If
no external reset is necessary this input can be left open. If used (emergency reset), it has to be
driven by an open collector or an open drain output:
•
∼RST pin 14 = 0, for Module Reset,
•
∼RST pin 14 = 1, for normal mode.
Pin description
Signal
Pin number
I/O
I/O type
Description
∼RST
14
I/O
SCHMITT
Module Reset
Electrical Characteristics
Parameter
Min
Input Impedance ( R )
4.7
Input Impedance ( C )
Max
Unit
kΩ
10
nF
Operating conditions
Parameter
Min
Max
*VT-
1.1 V
1.2 V
*VT+
1.7 V
1.9 V
VOL
VOH
0.4 V
2.0 V
Condition
IOL = -50 µA
IOH = 50 µA
* VT-, VT+ : Hysteresis thresholds
Additional comments on RESET:
The RESET process is activated either by the external ~RST signal or by an internal signal (coming
from a RESET generator). This automatic reset is activated at Power-up.
The module remains in RESET mode as long as the ~RST signal is held low.
This signal should be used only for “emergency” resets.
A software reset is always preferred to a hardware reset.
confidential ©
Page : 35 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
2.17.2
Reset sequence
To activate the « emergency » reset sequence, the ~RST signal has to be set to low for 500 µs
minimum.
As soon as the reset is complete, the AT interface answers « OK » to the application. For this, the
application has to send AT↵. If the application manages hardware flow control, the AT command
can be sent during the initialisation phase. Another solution is to use the AT+WIND command to get
an unsollicited status from the module.
For further details, refer to AT commands documentation [3].
EXT ERN A L RST
M in : 5 0 0 µs
Typ :2 m s
A T an s w ers “ O K”
M o d u le REA D Y
ST A T E O F T H E M O D U LE
M o d u le O N M o d u le REA D Y
< 120 m A
RESET m o d e w itI BhBo+ RF
u t lo c u p d a t e
I B B + RF = 2 0
to 40 m A
SIM an d n et w o rk d ep en d en t
Figure 5: Reset sequence diagram
2.18 External Interrupt (~INTR)
The WISMO module provides an external interrupt input ~INTR. This input is very sensitive and an
interrupt is activated on high to low edge. If this signal is not used it can be left open. If used this
input has to be driven by an open collector or an open drain output.
This input is used for instance to power OFF automatically the module.
Pin description
Signal
Pin number
I/O
I/O type
Description
~INTR
16
CMOS
External Interrupt
Electrical characteristics
Parameter
Min
Max
Unit
VIL
-0.5
0.7
Volt
VIH
2.2
3.0
Volt
confidential ©
Page : 36 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
2.19 VCC output
This output can be used to power some external functions. VCC has to be used as a digital power
supply. This power supply is available when the module is ON.
Pin description
Signal
Pin number
I/O
I/O type
Description
VCC
40
Supply
Digital supply
Operating conditions
Parameter
Condition
Min
Max
Unit
Output voltage
I = 10 mA
2.74
2.86
10
mA
Output Current
2.20 Real Time Clock Supply (VCC_RTC)
VCC_RTC input is used to provide a back-up power supply for the internal Real Time Clock. The
RTC is supported by the module when powered on but a back-up power supply is needed to save
date and time information when the module is switched off.
If the RTC is not used this pin can be left open.
Pin description
Signal
Pin number
I/O
I/O type
Description
VCC_RTC
56
I/O
Supply
RTC Back-up supply
Operating conditions
Parameter
Condition
Min
Max
Unit
2.75
Input voltage
Input Current
VCC=0 V; t° = +25 °C
VCC_RTC=2.5 V
µA
Input Current
VCC=0 V; t°:-20 °C / +55 °C
VCC_RTC=2.5 V
10
µA
2.75
mA
Output voltage
2.4
Output current
2.21 RF interface
The impedance is 50 Ohms nominal and the DC impedance is 0 Ohm.
confidential ©
Page : 37 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
2.21.1
RF connections
2.21.1.1
General
There are two possible ways to connect an antenna to the module:
•
The antenna can be directly connected to the module on the "Antenna pad" by using a spring
contact.
•
The antenna can be connected to the module through a coaxial cable. The coaxial cable is
connected to both the "Round pad" and the "Ground pad".
Spring contact
Two land patterns set on the PCB support the RF connection which can be used by the
application through spring contacts or a soldered RF cable.
Since no standard spring contact is available for WISMO Quik Q24x6 sub-series, this solution
requires a specific part to be developed.
Soldered solution
The soldered solution will preferably be based on a RG178 coaxial cable.
G rou n d
pad
A n ten n a
pad
A n ten n a pa d
Antenna connection by spring contact.
Antenna connection by coaxial cable.
Figure 6: Antenna connection
Note:
•
The WISMO Quik Q24x6 sub-series does not include any antenna switch for a car kit but
this function can be implemented externally and it can be driven using a GPIO.
•
The antenna cable and connector should be chosen in order to minimise losses in the
frequency bands used for GSM 850/E-GSM 900MHz and DCS 1800/PCS 1900MHz.
•
0.5 dB can be considered as a maximum value for loss between the module and an external
connector.
2.21.1.2
Antenna directly connected to the module: matching circuit
The goal of the matching circuit is to link the antenna (impedance ZA) to the receiver and transmitter
access of the module (impedance ZL = 50 Ohm real).
confidential ©
Page : 38 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
ZA
M a t c h in g
c irc u it
ZL = 5 0 Oh m
Rec eiv er +
W ISM O m o d u le
Figure 7: Matching circuit
The matching circuit is composed by four elements implemented (see figure above) on the module
connecting the "Antenna pad" to the "Round pad" (access to the receiver and the transmitter).
The four elements of the matching circuit are not yet defined, and depend on each antenna and
mechanical integration.
The matching circuit must be verified for each frequency bandwidth:
Q2406:
900 MHz (880 to 960 MHz),
1800 MHz (1710 to 1880 MHz).
Q2426:
850 MHz (824 to 894 MHz),
1900 MHz (1850 to 1990 MHz).
CM2
CM4
CM3
CM1
Figure 8: WISMO Q24x6 sub-series antenna matching circuit (bottom view)
confidential ©
Page : 39 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
A n t en n a p a d
GN D
CM 3
CM 2
ZL = 5 0 Ω
CM 1
GN D
CM 4
Ro u n d p a d
GN D
Figure 9: Electrical diagram for the WISMO Quik Q24x6 sub-series
2.21.2
RF performances
RF performances are compliant with the ETSI recommendation GSM 05.05.
The main parameters for Receiver are:
•
•
•
•
•
•
•
•
GSM850 Reference Sensitivity (Q2426) = -104 dBm Static & TUHigh
E-GSM900 Reference Sensitivity (Q2406)= -104 dBm Static & TUHigh
DCS1800 Reference Sensitivity (Q2406)= -102 dBm Static & TUHigh
PCS1900 Reference Sensitivity (Q2426)= -102 dBm Static & TUHigh
Selectivity @ 200 kHz: > +9 dBc
Selectivity @ 400 kHz: > +41 dBc
Linear dynamic range: 63 dB
Co-channel rejection: >= 9 dBc
And for Transmitter:
•
•
•
•
2.21.3
Maximum output power (E-GSM 900 & GSM850): 33 dBm +/- 2 dB at ambient temperature,
Maximum output power (DCS1800 & PCS1900): 30 dBm +/- 2 dB at ambient temperature,
Minimum output power (E-GSM 900 & GSM850): 5 dBm +/- 5 dB at ambient temperature,
Minimum output power (DCS1800 & PCS1900): 0 dBm +/- 5 dB at ambient temperature.
Antenna specifications
The antenna must fulfil the following requirements:
Frequency depends on application. A dual-Band antenna shall work in these frequency bands and
have the following characteristics:
confidential ©
Page : 40 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
Q2406
Characteristic
Q2426
E-GSM 900
DCS 1800
GSM 850
PCS 1900
Frequency TX
880 to 915 MHz
1710 to 1785
MHz
824 to 849 MHz
1850 to 1910 MHz
Frequency RX
925 to 960 MHz
1805 to 1880
MHz
869 to 894 MHz
1930 to 1990 MHz
Impedance
VSWR
Typical
gain
50 Ohms
Rx max
1.5 :1
Tx max
1.5 :1
radiated
0 dBi in one direction at least
confidential ©
Page : 41 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
3 Technical specifications
3.1
General Purpose Connector pin out description
Pin #
Name
CHG_IN
I/O
I/O type
Supply
Description
Supply for battery
charging
Comment
High current
CHG_IN
Supply
Supply for battery
charging
High current
SIM_CLK
2X
Clock for SIM interface
CHG_IN
Supply
Supply for battery
charging
SIM_RST
2X
Reset for SIM interface
ON/~OFF
CMOS
Power ON/OFF control
SIM_DATA
I/O
CMOS / 3X
I/O for SIM interface
SDA/SPI_IO
I/O
CMOS/1X
Wire interface or SPI
Serial Data
SIM_VCC
Supply
SIM card supply
10
SCL/SPI_CLK
1X
Wire interface or SPI
Serial clock
11
VDD
Supply
Low power supply
3.1 V minimum or
connected to VBATT
12
BOOT
CMOS
BOOT
Pull down through 1 KΩ
for Flash downloading
13
ROW0
I/O
CMOS/1X
Keyboard Row
14
~RST
I/O
SCHMITT
Module Reset
15
ROW1
I/O
CMOS/1X
Keyboard Row
16
~INTR
CMOS
External interrupt
17
ROW2
I/O
CMOS/1X
Keyboard Row
GPI or
CMOS or 3x
18
CT103/TXD2 *
High current
6 mA max
Active low
Active low. 100 KΩ
Pull-up inside
General Purpose Input or 100K Pull-down inside Aux.serial Link (UART2)
Multiplexed
confidential ©
Page : 42 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
Pin #
19
20
Name
ROW3
I/O
I/O
I/O type
CMOS/1X
Description
Keyboard Row
Comment
GPO2 or
1X or CMOS
General Purpose Output or
Aux.serial Link (UART2)
Multiplexed
CT104/RXD2 *
21
ROW4
I/O
CMOS/1X
Keyboard Row
22
GPO1
3X
General Purpose Output
23
COL0
I/O
CMOS/1X
Keyboard Column
GPIO0 or
I/O
CMOS/2X or
CMOS
General Purpose I/O
or Aux. serial Link
(UART2)
24
CT106/CTS2 *
25
COL1
I/O
CMOS/1X
Keyboard Column
26
GPO0 or
SPI_AUX
3X or
General Purpose Output or
SPI Aux
Or SIM 3 V / 5 V
27
COL2
I/O
CMOS/1X
Keyboard Column
28
SPI_EN or GPO3
1X or
SPI enable or General
Purpose Output
1X
CMOS
Multiplexed
Multiplexed
Multiplexed
29
COL3
I/O
CMOS/1X
Keyboard Column
30
CT105/RTS1
CMOS
Serial link interface
Request To Send
(UART1)
31
COL4
I/O
CMOS/1X
Keyboard Column
32
CT104/RXD1
1X
Serial link interface
Receive (UART1)
33
AUXV0
Analog
Auxiliary ADC input 0
Can be tied to GND if
not used
34
CT108-2/DTR1
CMOS
Serial link interface
Data Terminal Ready
(UART1)
Pull up to VCC with
100 kΩ when not
used
GPIO5 or
I/O
CMOS / 2X or 2X
General Purpose I/O
or Aux. serial Link
(UART2)
Serial link interface
Data Set Ready
(UART1)
Multiplexed
35
CT105/RTS2 *
Pull up to VCC with
100 kΩ when not
used
36
CT107/DSR1
1X
37
CT106/CTS1
1X
Serial link interface
Clear To Send
(UART1)
38
BAT_TEMP
Analog
ADC input for battery
temperature measurement
Can be tied to GND if
not used
39
CT103/TXD1
CMOS
Serial link interface
Transmit
Pull up to VCC with
100 kΩ when not
confidential ©
Page : 43 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
Pin #
Name
I/O
I/O type
Description
(UART1)
Comment
used
40
VCC
Supply
2.8 V digital supply output
10 mA max.
41
SPK1P
Analog
Speaker 1
positive output
42
MIC1P
Analog
Microphone 1 positive
input
43
SPK1N
Analog
Speaker 1
negative output
44
MIC1N
Analog
Microphone 1
negative input
45
SPK2P
Analog
Speaker 2
positive output
46
MIC2P
Analog
Microphone 2
positive input
47
SPK2N
Analog
Speaker 2
negative output
48
MIC2N
Analog
Microphone 2
negative input
49
BUZ
Analog
Buzzer output
50
SIM_PRES
CMOS
SIM Card Detect
51
GPIO3 or
I/O
CMOS/2X
General Purpose I/O
CT109/DCD1
GPIO1
I/O
52
54
GPIO4
CMOS/2X
General Purpose I/O
CMOS/2X
General Purpose I/O
GPIO2 or
I/O
CMOS/2X
General Purpose I/O
CT125 / RI1
+VBATT
56
VCC_RTC
57
Multiplexed
Module State
I/O
55
Multiplexed
Serial interface
Data Carrier Detect
(UART1)
FLASH LED
53
80 mA max
Multiplexed
Serial interface
Ring Indicator
(UART1)
Supply
Battery Input
Supply
RTC back-up supply
+VBATT
Supply
Battery Input
High current
58
+VBATT
Supply
Battery Input
High current
59
+VBATT
Supply
Battery Input
High current
60
+VBATT
Supply
Battery Input
High current
I/O
High current
* Auxiliary Serial link not available on Q24x6D and Q24x6E products
confidential ©
Page : 44 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
59
60
Figure 10: WISMO Quik Q24x6 sub-series pin position (bottom view)
confidential ©
Page : 45 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
3.2
Environmental Specifications
Conditions
Temperature range
Operating / Full GSM specifications compliant
-20 °C to +55 °C
Storage
-30 °C to +85 °C
ENVIRONMENTAL CLASSES
TYPE OF TEST
STANDARDS
STORAGE
Class 1.2
TRANSPORTATION
Class 2.3
Cold
IEC 68-2.1
Ab test
-25° C
72 h
-40° C
72 h
-20° C (GSM900)
-10° C (GSM1800/1900)
16 h
16h
Dry heat
IEC 68-2.2
Bb test
+70° C
72 h
+70° C
72 h
+55° C
16 h
Change of temperature
IEC 68-2.14
Na/Nb test
Damp heat
cyclic
IEC 68-2.30
Db test
+30° C
2 cycles
90% - 100% RH
variant 1
+40° C
2 cycles
90% - 100% RH
variant 1
+40° C
2 cycles
90% - 100% RH
variant 1
Damp heat
IEC 68-2.56
Cb test
+30° C
+40° C
+40° C
Sinusoidal vibration
IEC 68-2.6
Fc test
5 - 62 Hz :
5 mm / s
62 - 200Hz :
2 m / s2
3 x 5 sweep cycles
Random vibration
wide band
IEC 68-3.36
Fdb test
-40° / +30° C
4 days
5 cycles
t1 = 3 h
4 days
5 - 20 Hz :
0.96 m2 / s3
20 - 500Hz :
- 3 dB / oct
3 x 10 min
OPERATING (PORT USE)
Class 7.3
-20° / +30° C (GSM900) 3 cycles
-10° / +30° C (GSM1800/1900):
3 cycles
t1 = 3 h
4 days
10 -12 Hz :
0.96 m2 / s3
12 - 150Hz :
- 3 dB / oct
3 x 30 min
Electro-Static Discharge (ESD):
According to the norm EN 61000-4-2, the maximum ESD level supported by the Q24x6 sub-series is
±4 kV for all the pins including the antenna connector.
Humidity:
According to IPC/JEDEC J-STD-033, the moisture class of the Q2400 series is level 3. The floor life
from the opening of the sealed bag is 168 hours.
Reflow soldering:
The WISMO Quik Q2400 series does not support any reflow soldering.
confidential ©
Page : 46 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
3.3
Mechanical specifications
3.3.1
Physical characteristics
The WISMO Quik Q24x6 Series module has a complete self-contained shield.
•
Dimensions
: 58.4 x 32.2 x 3.9 mm external dimensions (except shielding pins)
•
Weight
: <11 g
3.3.2
Mechanical drawings
The next page gives the mechanical specifications of WISMO Quik Q24x6 sub-series.
confidential ©
Page : 47 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
Insert here mechanical drawing
confidential ©
Page : 48 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
4 Appendix
4.1
Wavecom acceptance test
The WISMO Quik Q24x6 sub-series complies with Wavecom standard acceptance test plan (Refer
to document [4]).
4.2
GSM Standard and Recommendations
The WISMO Quik Q24x6 sub-series is compliant with the following GSM ETSI, 3GPP, GCF and
NAPRD03 recommendations for Phase II.
Specification Reference
Title
3GPP TS 45.005 v5.5.0 (2002-08) Technical Specification Group GSM/EDGE. Radio Access Network;
Release 5
Radio transmission and reception
Digital cellular telecommunications system (Phase 2+);
GSM 02.07 V8.0.0 (1999-07)
Mobile Stations (MS) features (GSM 02.07 version 8.0.0 Release
1999)
GSM 02.60 V8.1.0 (1999-07)
Digital cellular telecommunications system (Phase 2+);
General Packet Radio Service (GPRS); Service description, Stage 1
(GSM 02.60 version 8.1.0 Release 1999)
GSM 03.60 V7.9.0 (2002-09)
Technical Specification Group Services and System Aspects;
Digital cellular telecommunications system (Phase 2+); General
Packet Radio Service (GPRS); Service description; Stage 2 (Release
1998)
3GPP TS 43.064 V5.0.0 (2002-04) Technical
Specification
Group
GERAN;
Digital
cellular
telecommunications system (Phase 2+); General Packet Radio
Service (GPRS); Overall description of the GPRS radio interface;
Stage 2 (Release 5)
3GPP TS 03.22 V8.7.0 (2002-08)
Technical Specification Group GSM/EDGE. Radio Access Network;
Functions related to Mobile Station (MS) in idle mode and group
receive mode; (Release 1999)
3GPP TS 03.40 V7.5.0 (2001-12)
Technical Specification Group Terminals;
Technical realization of the Short Message Service (SMS)
(Release 1998)
3GPP TS 03.41 V7.4.0 (2000-09)
Technical Specification Group Terminals; Technical realization of Cell
Broadcast Service (CBS) (Release 1998)
ETSI EN 300 903 V8.1.1 (2000-11) Digital cellular telecommunications system (Phase 2+);
Transmission planning aspects of the speech service in the GSM
Public Land Mobile Network (PLMN) system (GSM 03.50 version
confidential ©
Page : 49 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
Specification Reference
Title
8.1.1 Release 1999)
3GPP TS 04.06 V8.2.1 (2002-05)
Technical Specification Group GSM/EDGE Radio Access Network;
Mobile Station - Base Station System (MS - BSS) interface; Data Link
(DL) layer specification (Release 1999)
3GPP TS 04.08 V7.18.0 (2002-09) Technical Specification Group Core Network;
Digital cellular telecommunications system (Phase 2+);
Mobile radio interface layer 3 specification (Release 1998)
3GPP TS 04.10 V7.1.0 (2001-12)
Technical Specification Group Core Networks;
Mobile radio interface layer 3 Supplementary services specification;
General aspects (Release 1998)
3GPP TS 04.11 V7.1.0 (2000-09)
Technical Specification Group Core Network; Digital cellular
telecommunications system (Phase 2+); Point-to-Point (PP) Short
Message Service (SMS) support on mobile radio interface
(Release 1998)
3GPP TS 45.005 v5.5.0 (2002-08) Technical Specification Group GSM/EDGE. Radio Access Network;
Radio transmission and reception (Release 5)
3GPP TS 45.008 V5.8.0 (2002-08) Technical Specification Group GSM/EDGE
Radio Access Network; Radio subsystem link control (Release 5)
3GPP TS 45.010 V5.1.0 (2002-08) Technical Specification Group GSM/EDGE
Radio Access Network; Radio subsystem synchronization (Release 5)
3GPP TS 46.010 V5.0.0 (2002-06) Technical Specification Group Services and System Aspects;
Full rate speech; Transcoding (Release 5)
3GPP TS 46.011 V5.0.0 (2002-06) Technical Specification Group Services and System Aspects;
Full rate speech; Substitution and muting of lost frames for
full rate speech channels (Release 5)
3GPP TS 46.012 V5.0.0 (2002-06) Technical Specification Group Services and System Aspects;
Full rate speech; Comfort noise aspect for full rate speech traffic
channels (Release 5)
3GPP TS 46.031 V5.0.0 (2002-06) Technical Specification Group Services and System Aspects;
Full rate speech; Discontinuous Transmission (DTX) for full rate
speech traffic channels (Release 5)
3GPP TS 46.032 V5.0.0 (2002-06) Technical Specification Group Services and System Aspects;
Full rate speech; Voice Activity Detector (VAD) for full rate speech
traffic channels (Release 5)
TS 100 913V8.0.0 (1999-08)
Digital cellular telecommunications system (Phase 2+);
General on Terminal Adaptation Functions (TAF) for Mobile Stations
(MS) (GSM 07.01 version 8.0.0 Release 1999)
GSM 09.07 V8.0.0 (1999-08)
Digital cellular telecommunications system (Phase 2+);
General requirements on interworking between the Public Land Mobile
confidential ©
Page : 50 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
Specification Reference
Title
Network (PLMN) and the Integrated Services Digital Network (ISDN)
or Public Switched Telephone Network (PSTN) (GSM 09.07 version
8.0.0 Release 1999)
3GPP TS 51.010-1 v5.0.0 (2002- Technical Specification Group GSM/EDGE ; Radio Access
Network ;Digital cellular telecommunications system (Phase
09)
2+);Mobile Station (MS) conformance specification; Part 1:
Conformance specification (Release 5)
3GPP TS 51.011 V5.0.0 (2001- Technical Specification Group Terminals; Specification of the
Subscriber Identity Module - Mobile Equipment (SIM - ME) interface
12)
(Release 5)
ETS 300 641 (1998-03)
Digital cellular telecommunications system (Phase 2);
Specification of the 3 Volt Subscriber Identity Module - Mobile
Equipment (SIM-ME) interface (GSM 11.12 version 4.3.1)
GCF-CC V3.7.1 (2002-08)
Global Certification Forum – Certification criteria
NAPRD03 V2.6.0 (2002-06)
North America Permanent Reference Document for PTCRB tests
confidential ©
Page : 51 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
4.3
Safety recommendations (for information only)
IMPORTANT
FOR THE EFFICIENT AND SAFE OPERATION OF
YOUR GSM APPLICATION BASED ON WISMO Quik Q24x6 Series
PLEASE READ THIS INFORMATION CAREFULLY
4.3.1
RF safety
4.3.1.1
General
Your GSM terminal3 is based on the GSM standard for cellular technology. The GSM standard is
spread all over the world. It covers Europe, Asia and some parts of America and Africa. This is the
most used telecommunication standard.
Your GSM terminal is actually a low power radio transmitter and receiver. It sends out and receives
radio frequency energy. When you use your GSM application, the cellular system which handles
your calls controls both the radio frequency and the power level of your cellular modem.
4.3.1.2
Exposure to RF energy
There has been some public concern about possible health effects of using GSM terminals.
Although research on health effects from RF energy has focused on the current RF technology for
many years, scientists have begun research regarding newer radio technologies, such as GSM.
After existing research had been reviewed, and after compliance to all applicable safety standards
had been tested, it has been concluded that the product was fitted for use.
If you are concerned about exposure to RF energy there are things you can do to minimize
exposure. Obviously, limiting the duration of your calls will reduce your exposure to RF energy. In
addition, you can reduce RF exposure by operating your cellular terminal efficiently by following the
below guidelines.
4.3.1.3
Efficient terminal operation
For your GSM terminal to operate at the lowest power level, consistent with satisfactory call quality:
•
If your terminal has an extendible antenna, extend it fully. Some models allow you to place a
call with the antenna retracted. However your GSM terminal operates more efficiently with
the antenna fully extended.
•
Do not hold the antenna when the terminal is « IN USE ». Holding the antenna affects call
quality and may cause the modem to operate at a higher power level than needed.
4.3.1.4
Modular Transmitter
Modular transmitter. This device is to be used only for mobile and fixed applications.
The antenna(s) used for this transmitter must be installed to provide a separation distance of
at least 20 cm from all persons and must not be co-located or operating in conjunction with
any other antenna or transmitter. The antenna(s) used for this transmitter must not exceed
based on WISMO2D
confidential ©
Page : 52 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
a gain of 3 dBi for mobile operation and 7 dBi for fixed operation. Users and OEM
integrators must be provided with antenna installation instructions and transmitter operating
conditions for satisfying RF exposure compliance. OEM must also be provided with
labelling instructions. This device contains 900 MHz GSM functions that are not operational
in U.S. Territories. This filing is only applicable for GSM 850 MHz and 1900 MHz PCS
operations.
Once the module is integrated into an end product it is required that the integrated get a
separate equipment authorization. When the customers integrate the module only they will
be required to go back and redo FCC on the end product and get their own FCC ID.
This FCC ID does not apply for use of this module in mobile phones, all mobile phones have
to get a separate FCC ID.
4.3.1.5
Antenna care and replacement
Do not use the GSM terminal with a damaged antenna. If a damaged antenna comes into contact
with the skin, a minor burn may result. Replace a damaged antenna immediately. Consult your
manual to see if you may change the antenna yourself. If so, use only a manufacturer-approved
antenna. Otherwise, have your antenna repaired by a qualified technician.
Use only the supplied or approved antenna. Unauthorized antennas, modifications or attachments
could damage the terminal and may contravene local RF emission regulations or invalidate type
approval.
4.3.2
4.3.2.1
General safety
Driving
Check the laws and the regulations regarding the use of cellular devices in the area where you have
to drive as you always have to comply with them. When using your GSM terminal while driving,
please:
•
give full attention to driving,
•
pull off the road and park before making or answering a call if driving conditions so require.
4.3.2.2
Electronic devices
Most electronic equipment, for example in hospitals and motor vehicles, is shielded from RF energy.
However RF energy may affect some improperly shielded electronic equipment.
4.3.2.3
Vehicle electronic equipment
Check your vehicle manufacturer representative to determine if any on-board electronic equipment
is adequately shielded from RF energy.
4.3.2.4
Medical electronic equipment
Consult the manufacturer of any personal medical devices (such as pacemakers, hearing aids,
etc...) to determine if they are adequately shielded from external RF energy.
Turn your terminal OFF in health care facilities when any regulations posted in the area instruct you
to do so. Hospitals or health care facilities may be using RF monitoring equipment.
confidential ©
Page : 53 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
4.3.2.5
Aircraft
Turn your terminal OFF before boarding any aircraft.
Use it on the ground only with crew permission.
Do not use it in the air.
To prevent possible interference with aircraft systems, Federal Aviation Administration (FAA)
regulations require you to have permission from a crew member to use your terminal while the
aircraft is on the ground. To prevent interference with cellular systems, local RF regulations prohibit
using your modem while airborne.
4.3.2.6
Children
Do not allow children to play with your GSM terminal. It is not a toy. Children could hurt themselves
or others (by poking themselves or others in the eye with the antenna, for example). Children could
damage the modem, or make calls that increase your modem bills.
4.3.2.7
Blasting areas
To avoid interfering with blasting operations, turn your unit OFF when in a « blasting area » or in
areas posted: « turn off two-way radio ». Construction crew often use remote control RF devices to
set off explosives.
4.3.2.8
Potentially explosive atmospheres
Turn your terminal OFF when in any area with a potentially explosive atmosphere. It is rare, but your
modem or its accessories could generate sparks. Sparks in such areas could cause an explosion or
fire resulting in bodily injuries or even death.
Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They
include fuelling areas such as petrol stations; below decks on boats; fuel or chemical transfer or
storage facilities; and areas where the air contains chemicals or particles, such as grain, dust, or
metal powders.
Do not transport or store flammable gas, liquid, or explosives, in the compartment of your vehicle
which contains your terminal or accessories.
Before using your terminal in a vehicle powered by liquefied petroleum gas (such as propane or
butane) ensure that the vehicle complies with the relevant fire and safety regulations of the country
in which the vehicle is to be used.
4.3.3
FCC and Industry Canada Regulatory compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Your mobile device is a low power radio transmitter and receiver. When it is ON, it receives and also sends
out radio frequency (RF) signals. In August 1996, the Federal Communications Commission (FCC) adopted
RF exposure guidelines with safety levels for mobile device. Those guidelines are consistent with safety
standards previously set by both U.S. and international standards bodies: American National Standard Institute
(ANSI), National Council of Radiation Protection and Measurements (NCRP), and International Commission
on Non-Ionizing Radiation Protection (ICNRP). Those standards were based on comprehensive and periodic
confidential ©
Page : 54 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
evaluations of the relevant scientific literature. The design of your Module complies with the FCC guidelines
and applicable
WARNING: Unauthorized antennas, modifications, or attachments could impair call quality, damage
the Module, or result in violation of FCC regulations. Do not use the Module with a damaged antenna.
Please contact your local authorized dealer for antenna replacement.
Important!
Read these safety guidelines prior to using your Module. Failure to follow these rules and guidelines may be
dangerous and/or illegal.
4.3.3.1
Road Safety Information
Do not use a hand-held Module while driving a vehicle. Talking on the Module while driving is dangerous and
illegal in some locations. If using a hand-held Module, park the vehicle before conversing. Remember – road
safety always comes first!
4.3.3.2
Aircraft Safety Information
Power down your Module prior to boarding an aircraft. Sending and receiving calls on your Module on an
aircraft is prohibited by law and aviation regulations. Using a wireless Module in an aircraft may interfere with
aircraft radio communication or navigation equipment, and disrupt the wireless Module network. When
boarding an aircraft, turn your Module OFF.
4.3.3.3
Hospital & Medical Safety Information
Power down your Module prior to entering hospitals, health care facilities, or when near medical equipment.
Operating any radio transmitting equipment, including digital wireless Modules, may interfere with RFsensitive medical devices. Follow all posted regulations while in hospitals and health care facilities regarding
the use of your Module.
4.3.3.4
Blasting and Refueling Safety Information
Do not use your Module near a blasting site. Power down your Module when in any area with a potentially
explosive
Atmosphere. Radio transmissions in such areas could cause an explosion or fire, resulting in bodily injury or
even death. Obey all posted signs and instructions regarding the use of wireless Module usage. Observe
restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants
or where blasting operations are in progress.
4.3.3.5
Interference Safety Information
All mobile Modules are subject to radio frequency interference that may affect the performance of your
Module. Your digital wireless Module is a low power radio transmitter and receiver. The design of your
Module complies with the FCC guidelines and applicable standards. Never rely solely on your Module for
essential communications (e.g., medical emergencies). You must be in a service area with adequate signal
confidential ©
Page : 55 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
strength to use the Module. Emergency calls may not be possible on all wireless Module networks or when
certain network services and/or Module features are in use. Check with your local service provider(s).
4.3.3.6
Service Safety Information
Only qualified service personnel are authorized to repair your digital wireless Module and equipment. Use
only approved accessories. Contact you sales representative authorized service centers.
FCC RF EXPOSURE INFORMATION
In August 1996 the Federal Communications Commission (FCC) of the United States with its action in Report
and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency
electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety
standard previously set by both U.S. and international standards bodies. The design of this phone complies
with the FCC guidelines and these international standards.
For more information about RF exposure, please visit the FCC website at www.fcc.gov
confidential ©
Page : 56 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
4.4
General Purpose Connector data sheet
The next 6 pages are the KYOCERA/ELCO data sheets for the GPC (also available from
http://www.avxcorp.com .
confidential ©
Page : 57 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
AVX 1/6
confidential ©
Page : 58 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
AVX 2/6
confidential ©
Page : 59 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
AVX 3/6
confidential ©
Page : 60 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
AVX 4/6
confidential ©
Page : 61 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
AVX 5/6
confidential ©
Page : 62 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
WM_PRJ_Q2400_PTS_002 - 004
March 5, 2004
AVX 6/6
confidential ©
Page : 63 / 63
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2004:03:05 17:09:23-08:00
Subject                         : Q2406/Q2426
Create Date                     : 2004:03:05 17:05:55-08:00
Page Count                      : 63
Creation Date                   : 2004:03:06 01:05:55Z
Mod Date                        : 2004:03:06 01:05:55Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : Marc DESCUSSES
Metadata Date                   : 2004:03:06 01:05:55Z
Creator                         : Marc DESCUSSES
Title                           : WISMO Quik Q2400 series
Description                     : Q2406/Q2426
Page Mode                       : UseNone
Tagged PDF                      : Yes
EXIF Metadata provided by EXIF.tools
FCC ID Filing: O9EQ2426-SK

Navigation menu