Sierra Wireless Q26ELITE Cellular/ PCS CDMA Transmitter Module User Manual Q26 Elite Wireless CPU Product Manual

Sierra Wireless, Inc. Cellular/ PCS CDMA Transmitter Module Q26 Elite Wireless CPU Product Manual

Users Manual

Revision: 002 Date: April 17, 2009 Reference: WI_DEV_Q26EL_UGD_002 Q26 Elite Wireless CPU® Product Manual
© Confidential Page: 1 / 18 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. WI_DEV_Q26EL_UGD_002-002 April 17, 2009 Q26 Elite User Manual Q26 Elite Wireless CPU®User Manual Reference: WI_DEV_Q26EL_UGD_002 Revision: 002 Date: April 17, 2009
© Confidential Page: 2 / 18 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. WI_DEV_Q26EL_UGD_002-002 April 17, 2009 Q26 Elite User Manual Document History Revision Date List of revisions 001 April 7, 2009 Creation 002 April 17, 2009 Updates
© Confidential Page: 3 / 18 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. WI_DEV_Q26EL_UGD_002-002 April 17, 2009 Q26 Elite User Manual Overview This document is intended to provide the product technical specifications of the Q26 Elite Wireless CPU® and all derivatives.
© Confidential Page: 4 / 18 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. WI_DEV_Q26EL_UGD_002-002 April 17, 2009 Q26 Elite User Manual Cautions This platform contains a modular transmitter. This device is used for wireless applications. Note that all electronics parts and elements are ESD sensitive. Information provided herein by WAVECOM is accurate and reliable. However no responsibility is assumed for its use and any of such WAVECOM information is herein provided “as is” without any warranty of any kind, whether express or implied. General information about WAVECOM and its range of products is available at the following internet address: http://www.wavecom.com Trademarks , , ®, inSIM®, “YOU MAKE IT, WE MAKE IT WIRELESS”®, WAVECOM®, WISMO®, Wireless Microprocessor®, Wireless CPU®, Open AT® and certain other trademarks and logos appearing on this document, are filed or registered trademarks of Wavecom S.A. in France and/or in other countries. All other company and/or product names mentioned may be filed or registered trademarks of their respective owners. Copyright This manual is copyrighted by WAVECOM with all rights reserved. No part of this manual may be reproduced, modified or disclosed to third parties in any form without the prior written permission of WAVECOM. No Warranty/No Liability This document is provided “as is”. Wavecom makes no warranties of any kind, either expressed or implied, including any implied warranties of merchantability, fitness for a particular purpose, or noninfringement. The recipient of the documentation shall endorse all risks arising from its use. In no event shall Wavecom be liable for any incidental, direct, indirect, consequential, or punitive damages arising from the use or inadequacy of the documentation, even if Wavecom has been advised of the possibility of such damages and to the extent permitted by law.
© Confidential Page: 5 / 18 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. WI_DEV_Q26EL_UGD_002-002 April 17, 2009 Q26 Elite User Manual Table of Contents 1 References.................................................................................. 8 1.1 Abbreviations ..........................................................................................8 2 Product Description.................................................................... 9 2.1 Main Features .........................................................................................9 2.1.1 Recommended Operating Conditions...............................................9 2.1.2 Power Supply ..................................................................................9 2.1.3 Ground ............................................................................................9 2.1.4 Current Consumption ....................................................................10 2.1.5 RF Interfaces..................................................................................10 2.1.6 Environmental ...............................................................................10 2.1.7 CDMA Antenna Specifications.......................................................10 2.1.8 GPS Antenna Specification ............................................................11 3 Mechanical ............................................................................... 12 3.1 Mechanical Drawing .............................................................................12 3.2 Component Location Drawing ...............................................................13 4 System Connector Pin-out ........................................................ 14 5 FCC Certification ...................................................................... 18
© Confidential Page: 6 / 18 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. WI_DEV_Q26EL_UGD_002-002 April 17, 2009 Q26 Elite User Manual List of Figures Figure 1: Mechanical Drawing........................................................................ 12 Figure 2: Component Location Drawing ......................................................... 13
© Confidential Page: 7 / 18 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. WI_DEV_Q26EL_UGD_002-002 April 17, 2009 Q26 Elite User Manual List of Tables Table 1: Recommended Operating Conditions.................................................. 9 Table 2: Power Supply Specification ................................................................ 9 Table 3: RF Parametrics.................................................................................. 10 Table 4: CDMA Antenna Characteristics......................................................... 10 Table 5: GPS Antenna Characteristics ............................................................ 11 Table 6: System Connector Pin-out ................................................................ 14 Table 7: Pin Type Definition............................................................................ 17
© Confidential Page: 8 / 18 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. WI_DEV_Q26EL_UGD_002-002 April 17, 2009 Q26 Elite User Manual 1 References 1.1 Abbreviations Abbreviation Definition CDMA Code Division Multiple Access dB Decibel DC Direct Current EN Enable GPIO General Purpose Input Output GPS Global Positioning System GSM Global System for Mobile communications I/O Input / Output MAX MAXimum MIC MICrophone MIN MINimum NMEA National Marine Electronics Association NOM NOMinal PCB Printed Circuit Board RF Radio Frequency RST ReSeT RTC Real Time Clock RX Receive TX Transmit TYP TYPical UART Universal Asynchronous Receiver-Transmitter USB Universal Serial Bus VSWR Voltage Standing Wave Ratio
© Confidential Page: 9 / 18 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. WI_DEV_Q26EL_UGD_002-002 April 17, 2009 Q26 Elite User Manual 2 Product Description Designed for fast and easy integration, the Q26 Elite Wireless CPU® is a Dual Band (800/1900 MHz) product. The Wireless CPU® provides end application devices with wireless connectivity, high-speed data transfer, and advanced features such as gpsOne, TCP/IP, and voice. The Q26 family is designed to target the vertical applications market space such as automotive applications, Telematics, Machine-to-Machine Interfaces and Mobile Professional Applications. This Wireless CPU® is also designed for integration in Dual Processor applications 2.1 Main Features 2.1.1 Recommended Operating Conditions The table below defines the Recommended Operating Conditions for the Q26 Elite Wireless CPU®. Table 1: Recommended Operating Conditions Symbol Parameter Min Typ Max Units To Operating Temperature -40 +85 °C Ts Storage Temperature -40 +85 °C 2.1.2 Power Supply The VBATT power supply input provides power to the entire Q26 Elite Wireless CPU®. The system connector pins are identified in the table below. Table 2: Power Supply Specification Supply VMIN VNOM VMAX Units VBATT 3.8 4.0 4.2 V 2.1.3 Ground There are no Ground (GND) pins defined in the system connector. The application must ensure that the four mounting tabs of the Q26 Elite are soldered to GND and this is common to the GND of the Power Supply.
© Confidential Page: 10 / 18 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. WI_DEV_Q26EL_UGD_002-002 April 17, 2009 Q26 Elite User Manual 2.1.4 Current Consumption • 2mA (in Sleep Mode) • Up to 600mA - TX full power 2.1.5 RF Interfaces The Q26 Elite operates in Band Class 0 and 1 modes for CDMA 1xRTT operation. The table below defines the performance characteristics of the radio. Table 3: RF Parametrics BC0 (Power Class III) BC1 (Power Class II) Units Max TX RF Output Power +24 (+2/-1) +24 (+2/-1) dBm RX Sensitivity -104 -104 dBm Note: The values in the table above are valid at the RF connectors of the Q26 Elite into a 50 Ohm load. The Q26 Elite Wireless CPU® has two antenna connections; CDMA and GPS. These paths are separate internally and must be provide via the respective antenna ports. 2.1.6 Environmental • RoHs Compliance • Lead Free Compliance 2.1.7 CDMA Antenna Specifications A dual-band, tri-band or quad-band antenna may be used, depending on customer applications. The antenna must have the following characteristics: Table 4: CDMA Antenna Characteristics Characteristics US Cellular (BC0) US PCS (BC1) TX 824-849 1850-1910 Frequency (MHz) RX 869-894 1930-1990 RF 50 Ohm Impedance DC110 kOhm 1 For antenna diagnostic feature
© Confidential Page: 11 / 18 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. WI_DEV_Q26EL_UGD_002-002 April 17, 2009 Q26 Elite User Manual Characteristics US Cellular (BC0) US PCS (BC1) Rx 1.5: 1 VSWR max Tx 1.5: 1 Polarization Linear, vertical Typical radiated gain 0 dBi in one direction at least Note: Wavecom recommends a VSWR max of 1.5:1 for the Rx and Tx bands. Nevertheless, all aspects of this specification will be fulfilled even with a max. VSWR of 2:1. 2.1.8 GPS Antenna Specification The Q26 Elite Wireless CPU® is designed to provide a 5V bias to power an active GPS antenna. For applications in which an active antenna is used, a diagnostic function to detect OPEN, SHORT or OK status is available. Table 5: GPS Antenna Characteristics Characteristics GPS L1 Frequency (MHz) RX 1575.42 Impedance RF 50 Ohm VSWR max Rx 1.5: 1 LNA Bias Voltage 5V LNA Current Consumption 40 mA Max Polarization Linear, vertical Typical radiated gain 0 dBi in one direction at least
© Confidential Page: 12 / 18 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. WI_DEV_Q26EL_UGD_002-002 April 17, 2009 Q26 Elite User Manual 3 Mechanical The Q26 Elite Wireless CPU® is a member of the Q26 Family. It therefore has common length and width dimensions as the other Q26 Wireless CPU®s. The system connector physical attributes are identical as well as its placement. The primary RF connector and placement are also consistent with the rest of the family. 3.1 Mechanical Drawing Figure 1: Mechanical Drawing
© Confidential Page: 13 / 18 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. WI_DEV_Q26EL_UGD_002-002 April 17, 2009 Q26 Elite User Manual 3.2 Component Location Drawing Figure 2: Component Location Drawing
© Confidential Page: 14 / 18 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. WI_DEV_Q26EL_UGD_002-002 April 17, 2009 Q26 Elite User Manual 4 System Connector Pin-out Table 6: System Connector Pin-out Pin # Signal Name Voltage I/O* Pin Type Description 1 VBATT VBATT I AI Power Supply 2 VBATT VBATT I AI Power Supply 3 VBATT VBATT I AI Power Supply 4 VBATT VBATT I AI Power Supply 5 VCC_1V8 VCC_1V8 O AO 1.8V Supply Output 6 CHG-IN CHG-IN I AI Charger input 7 VCOIN VCOIN I/O AI, AO RTC Battery connection 8 CHG-IN CHG-IN I AI Charger input 9 UIM_PWR 1V8 or 3V O AO UIM Power Supply 10 VCC_2V8 VCC_2V8 O AO 2.8V Supply Output 11 UIM_DATA 1V8 or 3V I/O B6 UIM Data 12 GPIO2 VCC_1V8* I/O BS-PD2 13 UIM_RESET 1V8 or 3V O DO2 UIM reset Output 14 UIM_CLK 1V8 or 3V O DO2 UIM Clock 15 VIB_DRV_N Open Drain O Buzzer Output 16 BOOT VCC_1V8* I Not Used 17 LED Open Drain O Flash Led Output 18 RESET_N VCC_1V8 I/O RESET Input 19 ON/~OFF VBATT I ON / ~OFF Control 20 ADC_0 Analog I AI Analog to Digital Input 21 ADC_1 Analog I AI Analog to Digital Input 22 GPIO32 VCC_2V8 I/O BS-PD2 23 GPIO33 VCC_2V8 I/O BS-PD2 24 GPIO34 VCC_2V8 I/O BS-PD2 25 GPIO35 VCC_2V8 I/O BS-PD2 26 GPIO36 VCC_2V8 I/O BS-PD2
© Confidential Page: 15 / 18 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. WI_DEV_Q26EL_UGD_002-002 April 17, 2009 Q26 Elite User Manual Pin # Signal Name Voltage I/O* Pin Type Description 27 GPIO37 VCC_2V8 I/O BS-PD2 28 GPIO38 VCC_2V8 I/O BS-PD2 29 GPIO39 VCC_2V8 I/O BS-PD2 30 RXD2 VCC_1V8 O DO6 Auxiliary RS232 Receive 31 TXD2 VCC_1V8 I DI Auxiliary RS232 Transmit 32 CTS2 VCC_1V8 O DO2 Auxiliary RS232 Clear To Send 33 RTS2 VCC_1V8 I DI Auxiliary RS232 Request To Send 34 MIC2N Analog I AI Micro 2 Input Negative 35 HPH_OUT_L_P Analog O AO Speaker 1 Output Positive, 32 Ohm Output 36 MIC2P Analog I AI Micro 2 Input Positive 37 HPH_OUT_R_N Analog O AO Speaker 1 Output Negative, 32 Ohm Output 38 LINE_IN_R_N Analog I AI Micro 1 Input Negative 39 SPKR_OUT_P Analog O AO Speaker 2 Output Positive, 8 Ohm Output 40 LINE_IN_L_P Analog I AI Micro 1 Input Positive 41 SPKR_OUT_N Analog O AO Speaker 2 Output Negative, 8 Ohm Output 42 EBI2_LB_N VCC_1V8 O DO10 Lower Byte select 43 GPIO40 VCC_2V8 I/O BS-PD2 44 SCL VCC_2V8 O B2 I²C Clock 45 GPIO41 VCC_2V8 I/O BS-PD2 46 SDA VCC_2V8 I/O B2 I²C Data 47 GPIO42 VCC_2V8 I/O BS-PD2 48 GPIO43 VCC_2V8 I/O BS-PD2 49 GPIO44 VCC_2V8 I/O BS-PD2 50 GPIO7 VCC_1V8* I/O 51 GPIO51 VCC_1V8 I/O BS-NP6 52 VPAD-USB VPAD-USB I AI USB Power supply input
© Confidential Page: 16 / 18 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. WI_DEV_Q26EL_UGD_002-002 April 17, 2009 Q26 Elite User Manual Pin # Signal Name Voltage I/O* Pin Type Description 53 GPIO50 VCC_1V8* I/O BS-PD2 54 USB-DP VPAD-USB I/O AI, AO USB Data 55 GPIO45 VCC_2V8 I/O BS-PD2 56 USB-DM VPAD-USB I/O AI, AO USB Data 57 GPIO46 VCC_2V8 I/O BS-PD2 58 GPIO49 VCC_2V8 I/O BS-PU2 59 COL0 VCC_1V8* I/O BS2 Keypad column 0 60 COL1 VCC_1V8* I/O BS2 Keypad column 1 61 COL2 VCC_1V8* I/O BS2 Keypad column 2 62 COL3 VCC_1V8* I/O BS2 Keypad column 3 63 COL4 VCC_1V8* I/O BS2 Keypad column 4 64 ROW4 VCC_1V8* I/O DO2 Keypad Row 4 65 ROW3 VCC_1V8* I/O DO2 Keypad Row 3 66 ROW2 VCC_1V8* I/O DO2 Keypad Row 2 67 ROW1 VCC_1V8* I/O DO2 Keypad Row 1 68 ROW0 VCC_1V8* I/O DO2 Keypad Row 0 69 RI1 VCC_2V8 O BS-PD2 Main RS232 Ring Indicator 70 DCD1 VCC_2V8 O BS-PD2 Main RS232 Data Carrier Detect 71 TXD1 VCC_2V8 I DI Main RS232 Transmit 72 RTS1 VCC_2V8 I DI Main RS232 Request To Send 73 RXD1 VCC_2V8 O DO4 Main RS232 Receive 74 DSR1 VCC_2V8 O BS-PD2 Main RS232 Data Set Ready 75 CTS1 VCC_2V8 O DO4 Main RS232 Clear To Send 76 DTR1 VCC_2V8 I BS-PD2 Main RS232 Data Terminal Ready 77 PCM_SYNC VCC_1V8* O B2 PCM Frame Synchro 78 PCM_DIN VCC_1V8* I B2 PCM Data Input 79 PCM_CLK VCC_1V8* O B2 PCM Clock 80 PCM_DOUT VCC_1V8* O B2 PCM Data Output 81 EBI2_OE_N VCC_1V8 O DO10 Output Enable/ Read not write
© Confidential Page: 17 / 18 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. WI_DEV_Q26EL_UGD_002-002 April 17, 2009 Q26 Elite User Manual Pin # Signal Name Voltage I/O* Pin Type Description 82 Reserved VPAD-USB Reserved 83 EBI2_CS0_N VCC_1V8 O DO10 Chip Select 84 EBI2_WE_N VCC_1V8 O DO10 Write Enable 85 EBI2_AD0 VCC_1V8 I/O B-K10 Data for Peripheral 86 EBI2_AD15 VCC_1V8 I/O B-K10 Data for Peripheral 87 EBI2_AD1 VCC_1V8 I/O B-K10 Data for Peripheral 88 EBI2_AD14 VCC_1V8 I/O B-K10 Data for Peripheral 89 EBI2_AD2 VCC_1V8 I/O B-K10 Data for Peripheral 90 EBI2_AD13 VCC_1V8 I/O B-K10 Data for Peripheral 91 EBI2_AD3 VCC_1V8 I/O B-K10 Data for Peripheral 92 EBI2_AD12 VCC_1V8 I/O B-K10 Data for Peripheral 93 EBI2_AD4 VCC_1V8 I/O B-K10 Data for Peripheral 94 EBI2_AD11 VCC_1V8 I/O B-K10 Data for Peripheral 95 EBI2_AD5 VCC_1V8 I/O B-K10 Data for Peripheral 96 EBI2_AD10 VCC_1V8 I/O B-K10 Data for Peripheral 97 EBI2_AD6 VCC_1V8 I/O B-K10 Data for Peripheral 98 EBI2_AD9 VCC_1V8 I/O B-K10 Data for Peripheral 99 EBI2_AD7 VCC_1V8 I/O B-K10 Data for Peripheral 100 EBI2_AD8 VCC_1V8 I/O B-K10 Data for Peripheral *NOTE: I = Inputs to the Q26 Elite and O = Outputs from the Q26 Elite. Table 7: Pin Type Definition Symbol Description Pad type AI Analog input AO Analog output B, BS Bidirectional, bidirectional with Schmitt trigger DI, DIS Digital CMOS input, digital input with Schmitt trigger DO Digital output Pad type - pull/keep details for digital I/Os PU Contains an internal pullup device PD Contains an internal pulludown device K Contains an internal weak keeper device (keepers cannot drive external buses) # Drive Strength for digital I/Os
© Confidential Page: 18 / 18 This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement. WI_DEV_Q26EL_UGD_002-002 April 17, 2009 Q26 Elite User Manual 5 FCC Certification The Q26 Elite is FCC certified as a ‘mobile device’, which requires a minimum distance of 20 cm between the application’s antenna and the human body. Per FCC Section 15.21, any changes or modifications to the Q26 Elite not expressly approved by Wavecom could void the user's authority to operate the equipment. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Wavecom’s FCC ID may be used by the integrator if the conditions below are followed: 1. The application must be implemented as a “mobile device” and not a “portable device.” 2. The application’s user and installation manuals must include a statement that a minimum distance of 20 cm between the antenna and the human body is required. 3. The antenna system gain must be within the following constraints: a) 850 MHz Band: the antenna system gain must not exceed 5.76 dBd gain. b) 1900 MHz PCS Band: the antenna system gain must not exceed 7.01 dBi gain. 4. The license module will have a FCC ID label on the module itself. The FCC ID label must be visible as defined by the FCC (visible through an open access door is permissible), or a separate label must be similarly visible that conveys the message: “Contains Transceiver Module FCC ID: O9EQ26ELITE.”
WAVECOM S.A. : 3 esplanade du Foncet - 92442 Issy-les-Moulineaux - France - Tel: +33 1 46 29 08 00 - Fax: +33 1 46 29 08 08Wavecom, Inc: 430 Davis Drive, Suite 300 Research Triangle Park, North Carolina, USA - Tel: +1 919 237 4000 - Fax: +1 919 237 4140WAVECOM Asia-Pacific: Unit 201-207, 2nd Floor, Bio-Informatics Centre No. 2 Science Park West Avenue, Hong Kong Science Park,Shatin, New Territories, Hong Kong (PRC) - Tel: +852-2824 0254 - Fax: +852-2824 0255 [Online contact details, GPS and maps]

Navigation menu