Sigma Designs UZB3-HMY Z-Wave USB Stick User Manual UZB3 03 HMYx

Sigma Designs Inc Z-Wave USB Stick UZB3 03 HMYx

Users Manual

UZB3 Z-Wave USB Adapter

1 1

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained herein this document. It may not be

edited, copied or circulated without prior written agreement by Sigma Designs.

UZB3

Model:

ACC-UZB3-HMY

ACC-UZB3-E

Z-Wave USB Stick

User’s Manual

UZB3 Z-Wave USB Adapter

1 1

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained herein this document. It may not be

edited, copied or circulated without prior written agreement by Sigma Designs.

CONTENTS

1. INTRODUCTION ..........................................................................................................................3

2. SPECIFICATIONS ..........................................................................................................................4

3. PC CONTROLLER APPLICATION SOFTWER INSTALLATION .............................................................6

4.1 Installation .............................................................................................................................6

4.2 Start the Z-Wave PC Controller application ..............................................................................9

4.3 Remove Z-Wave PC Controller application Software .............................................................. 10

4.4 User Interface ....................................................................................................................... 11

4. FCC NOTICE TO USERS ............................................................................................................... 24

5. EU DECLARATION OF CONFORMITY ........................................................................................... 25

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained he

edited, copied or circulated without prior written agreement by Sigma Designs.

1. INTRODUCTION

UZB, Z-Wave USB Stick

and bundled application software (PC Controller)

range of Z-

Wave enabled devices through your PC or Notebook.

Z-wave is an establishe

d short range interoperable two

Refer to http://www.z-

wave.com/home

Refer to

http://products.z

Refer to http://www.z-

wavealliance.org

Features



Simply plug in UZB to USB port of a PC/Notebook with PC Controller installed



Fully compatible with Z

certified device.

System Requirements

 Windows 7/8

32 & 64 bit



Linux kernel 2.6.24+

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained he

edited, copied or circulated without prior written agreement by Sigma Designs.

and bundled application software (PC Controller)

enables you to control a

Wave enabled devices through your PC or Notebook.

d short range interoperable two

-way RF mesh

network technology.

wave.com/home

for detail of the technology.

http://products.z

-wavealliance.org/ for various Z-Wave

certified

wavealliance.org

for Z-Wave Alliances.

Simply plug in UZB to USB port of a PC/Notebook with PC Controller installed

Fully compatible with Z

wave enable network that can communicate with any

32 & 64 bit

Linux kernel 2.6.24+

B3 Z-Wave USB Adapter

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained he

rein this document. It may not be

enables you to control a

network technology.

certified

ready products.

Simply plug in UZB to USB port of a PC/Notebook with PC Controller installed

wave enable network that can communicate with any

Z-wave

UZB3 Z-Wave USB Adapter

1 1

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained herein this document. It may not be

edited, copied or circulated without prior written agreement by Sigma Designs.

2. SPECIFICATIONS

Z-Wave & RF Specification

Z-Wave wireless transceiver comprises a 3-channel 1GHz ISM FSK/GFSK narrowband radios.

Table 1. UZB3 General Specifications

Region US EU JAPAN

Product UZB3

Product Description Z-Wave USB Adapter

Model UZB3-HMY UZB3-E UZB-H

Part Number ACC-UZB3-HMY ACC-UZB3-E ACC-UZB3-H

Manufacturer Sigma Designs

Z-Wave Chip SD3503

Z-Wave Library Serial API Version 4.x

Basic Device Class Static Controller

Z-Wave Protocol Z-Wave version ZDK 4.5x and ZDK6.0x

Firmware Version SDK6.51.06

Communication Half Duplex

Data Rate 9.6 kbps / 40 kbps / 100 kbps 100 kbps

Number of Channels 3

Frequency

919.80 MHz

921.40 MHz

921.42 MHz

868.42 MHz

868.40 MHz

869.85 MHz

922.50 MHz

923.90 MHz

926.30 MHz

Range 40 meters Line Of Sight

UZB3 Z-Wave USB Adapter

1 1

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained herein this document. It may not be

edited, copied or circulated without prior written agreement by Sigma Designs.

Table 2. Z-Wave RF properties (US) : ACC-UZB3-HMY

Data rate 9.6kbps 40kbps 100kbps

Frequency 921.42 MHz 921.40 MHz 919.80 MHz

Modulation Frequency Shift

Keying (FSK)

Frequency Shift

Keying (FSK)

Gaussian Frequency

Shift Keying (GFSK)

Frequency deviation fC±20kHz fC±20kHz fC±29.3kHz

Transmitter Bandwidth 90kHz +/-10% 90kHz +/-10% 110kHz +/-10%

Receiver Bandwidth 250kHz +/-10% 250kHz +/-10% 500kHz +/-10%

Coding Manchester

encoded

Non-return to Zero

(NRZ)

Non-return to Zero

(NRZ)

LO Injection Low-side Low-side Low-side

Table 3. Z-Wave RF properties (Europe) : ACC-UZB3-E

Data rate 9.6kbps 40kbps 100kbps

Frequency 868.42 MHz 868.40 MHz 869.85 MHz

Modulation Frequency Shift

Keying (FSK)

Frequency Shift

Keying (FSK)

Gaussian Frequency

Shift Keying (GFSK)

Frequency deviation fC±20kHz fC±20kHz fC±29.3kHz

Transmitter Bandwidth 90kHz +/-10% 90kHz +/-10% 110kHz +/-10%

Receiver Bandwidth 250kHz +/-10% 250kHz +/-10% 500kHz +/-10%

Coding Manchester

encoded

Non-return to Zero

(NRZ)

Non-return to Zero

(NRZ)

LO Injection Low-side Low-side High-side

UZB3 Z-Wave USB Adapter

1 1

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained herein this document. It may not be

edited, copied or circulated without prior written agreement by Sigma Designs.

3. PC CONTROLLER APPLICATION SOFTWER INSTALLATION

4.1 Installation

Exit all programs.

Run the installation file of the Z-Wave PC Controller application.

Figure 1. Welcome page of Z-Wave PC Controller installation

Select the installation folder and who should be able to use the Z-Wave PC Controller

application. Please note, that it is not recommended to move the Z-Wave PC Controller

application manually after it has been installed into the above specified folder.

When done, click

UZB3 Z-Wave USB Adapter

1 1

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained herein this document. It may not be

edited, copied or circulated without prior written agreement by Sigma Designs.

Figure 2. Installation folder

Installation confirmation appears. Click

again to confirm and start the installation.

Figure 3. Confirmation page of Z-Wave PC Controller installation

UZB3 Z-Wave USB Adapter

1 1

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained herein this document. It may not be

edited, copied or circulated without prior written agreement by Sigma Designs.

The actual installation procedure will pass with progress indicator and final confirmation

appears.

Click

to complete the installation.

Figure 4. Installation complete

UZB3 Z-Wave USB Adapter

1 1

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained herein this document. It may not be

edited, copied or circulated without prior written agreement by Sigma Designs.

4.2 Start the Z-Wave PC Controller application

You can start the Z-Wave PC Controller using the Start menu. To open the Start menu, click the

Start

button in the lower-left corner of your screen. Or, press the

Windows logo

key on your keyboard. The

Start menu appears.

To open Z-Wave PC Controller, click its icon shown in the left pane of the Start menu that displays the

most frequently used programs list. If you don't see its icon there, click

All Programs

at the bottom of

the left pane. Instantly, the left pane displays a long list of programs in alphabetical order, followed by a

list of folders. Click

Sigma Designs

folder, then click

Z-Wave PC Controller

folder and finally

Z-Wave PC

Controller

icon.

Each time you start Z-Wave PC Controller, you are actually running the “C:\Program

Files\SigmaDesigns\Z-Wave PC Controller\ZWaveController.exe” executable file, although you do not

usually type its name or even see it.

Run the PC based Controller application, and the Main window will appear as shown below:

Figure 5. 6PC based Controller Main Window

UZB3 Z-Wave USB Adapter

1 1

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained herein this document. It may not be

edited, copied or circulated without prior written agreement by Sigma Designs.

4.3 Remove Z-Wave PC Controller application Software

You can uninstall Z-Wave PC Controller from your computer if you no longer use it.

Open

Add or Remove Programs

in Control Panel.

To do it, click

Start

, then click

Control Panel

(in Classical View – click

Start

, then point to

Settings

, and click

Control Panel)

, and then double-click

Add or Remove Programs

Click the program in the list and then click the

Remove

button. You can sort programs by

selecting different options in

Sort by

Standard confirmation dialog appears. Click

Yes

to continue the removal of the Z-Wave PC

Controller software.

Z-Wave PC Controller and its settings will be removed without prompting you further.

UZB3 Z-Wave USB Adapter

1 1

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained herein this document. It may not be

edited, copied or circulated without prior written agreement by Sigma Designs.

4.4 User Interface

The PC Based Controller application Main window (See Figure 3) is divided into the following views:

• Title bar

• Menu bar

• Node

• Controller

• Command Class

• Associations

• Setup Route

• Node Info

• Log

• Status Bar

3.4.1 Main Menu

On top of the Main window is the Application

Main Menu

. It has the following items:

Categories Menu

Menu item Description

Node Toggle shows the Node section

Controller Toggle shows the Controller section

Cmd Class Toggle shows the Command Class section

Associations Toggle shows the Associations section

Setup Route Toggle shows the Setup Route section

Log Toggle shows the Log section

Settings To detect available serial ports and query them to find all

connected Z-Wave devices

Security Test

Schema

Toggle shows the Security Test Schema tab (only in Z-Wave

Security PC Controller)

ERTT Toggle shows the ERTT tab

Exit To exit the application.

UZB3 Z-Wave USB Adapter

1 1

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained herein this document. It may not be

edited, copied or circulated without prior written agreement by Sigma Designs.

Help menu

Z-Wave Pc Controller comes with its own built-in Help system. The Help menu includes the items to

access this Help system.

Menu item

Keyboard Shortcut

Description

Index Browses Help system by keywords.

Contents F1 Browses Help system by topics.

Search Opens search tab of the Help system.

About… Displays the version and short status information of

the application

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained he

edited, copied or circulated without prior written agreement by Sigma Designs.

3.4.2 Node View

The

Node

View

contains

Menu Bar, Node List

It is used for operations with nodes.

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained he

edited, copied or circulated without prior written agreement by Sigma Designs.

Menu Bar, Node List

and

Node information

for the selected node.

It is used for operations with nodes.

Figure 7. Node section

B3 Z-Wave USB Adapter

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained he

rein this document. It may not be

for the selected node.

UZB3 Z-Wave USB Adapter

1 1

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained herein this document. It may not be

edited, copied or circulated without prior written agreement by Sigma Designs.

The Node’s

Menu Bar

has the following items:

Menu item

Description

NW Inclusion

Network Wide Inclusion, to include all nodes into

network once they have been reset and given power

Add

To Add a node

Remove

To Remove a node

Node Info

To request Node info from a node

Request Node Neighbor Update

To get the neighbors from the specified node.

Set SUC/SIS

To set the “Set SUC” or “Set SIS” command to the

selected Controller

Basic Set On

Send the BASIC SET ON command to Switch a selected

node(s) ON

Toggle Basic Get

Starts/stops sending consequent BASIC GET commands

to the selected node(s)

Basic Set Off

Sends the BASIC SET OFF command to Switch a selected

node(s) OFF

Switch All On

To switch all nodes in the network ON

Switch All Off

To switch all nodes in the network OFF

Send NOP

‘No Operation’ – to send a frame not carrying any

functional info to a node

Numeric box after NOP

To enter the Node ID of the node to which a NOP frame

is to be sent

Is Failed

To send a Failure signal to a node

Replace failed

To Replace a failed node

Remove Failed

To Remove a failed node

Wake Up Interval (Set)

To set up the Wake Up Interval for a non-listening node

UZB3 Z-Wave USB Adapter

1 1

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained herein this document. It may not be

edited, copied or circulated without prior written agreement by Sigma Designs.

The

Node List

has three columns:

• Node Id

– shows the IDs of all nodes in the network;

• Device Type

– shows description of the type of every node in the network;

• Status

– shows the current status of a node.

The

Node Info

section gives structured information about the selected node. For more information,

please refer to Z-Wave Device Class Specification documentation.

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained he

edited, copied or circulated without prior written agreement by Sigma Designs.

3.4.3 Controller View

The

Controller view

includes

Menu Bar

The

Controller view

is used for operations with controllers.

The Controller’s

Menu Bar

has the following items:

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained he

edited, copied or circulated without prior written agreement by Sigma Designs.

Menu Bar

Network Role Option

and

Controller Information

is used for operations with controllers.

Figure 8. Controller view

has the following items:

B3 Z-Wave USB Adapter

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained he

rein this document. It may not be

Controller Information

sections.

UZB3 Z-Wave USB Adapter

1 1

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained herein this document. It may not be

edited, copied or circulated without prior written agreement by Sigma Designs.

Menu item

Description

Start Learn Mode

Starts learn mode for the controller if it is needed to include it in another

controller’s network

Reset

Resets a controller

Create New Primary

A SUC can create a new Primary Controller in the network if the existing

Primary controller fails

Request Update

An Inclusion controller can request network updates from a SUC or a SIS

Shift

Is used to shift primary role to another controller in the network

Load Command Classes

from device memory

To load command classes from the device memory (previously saved to

device memory)

Save Command Classes

to device memory

To save command classes from the PC Controller application memory to the

Static Controller device memory

The Network Role Option section has controls to assign the role of the SC in the network:

• SUC – Static Update Server

• SIS – Static Update Controller with ID server

• None

General information regarding the SC is displayed in the Controller Information section in the following

items:

Section Description

Controller ID

Displays the node ID of the PC based SC

Controller Home ID

Displays the current Home ID of the PC based SC

Controller Network Role

Displays the PC based SC network role

Serial Port

Displays the serial port in use.

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained he

edited, copied or circulated without prior written agreement by Sigma Designs.

3.4.4 Associations View

The

Associations

view has a

Menu bar

associations between nodes.

The Menu bar has two items:

Menu item

Description

Create Association

Creates an association between selected nodes

Remove Association

Removes selected association

The Source field shows

the list of available source nodes that support the Association command class,

e.g. Binary sensor.

The Groups field shows the association groups that can be or have been created.

The “Assign Return Routes” checkbox is to define whether the Controller shou

together with setting the association

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained he

edited, copied or circulated without prior written agreement by Sigma Designs.

Menu bar

, and two fields: Source and Groups

. It is used to set up

Description

Creates an association between selected nodes

Removes selected association

the list of available source nodes that support the Association command class,

The Groups field shows the association groups that can be or have been created.

The “Assign Return Routes” checkbox is to define whether the Controller shou

ld assign return routes

together with setting the association

Figure 9. Associations view

B3 Z-Wave USB Adapter

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained he

rein this document. It may not be

. It is used to set up

the list of available source nodes that support the Association command class,

The Groups field shows the association groups that can be or have been created.

ld assign return routes

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained he

edited, copied or circulated without prior written agreement by Sigma Designs.

3.4.5 Command Class View

The

Command Class view

is used to send a specified command class to a selected node. It has the

following items:

• Command Classes

: drop

• Command Name

: drop-

down list to select a command name belonging to the selected class;

•

Command Parameters Grid

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained he

edited, copied or circulated without prior written agreement by Sigma Designs.

is used to send a specified command class to a selected node. It has the

: drop

-down list to select a command class;

down list to select a command name belonging to the selected class;

Command Parameters Grid

: to enter command parameters.

Figure 10. Command Class view

B3 Z-Wave USB Adapter

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained he

rein this document. It may not be

is used to send a specified command class to a selected node. It has the

down list to select a command name belonging to the selected class;

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained he

edited, copied or circulated without prior written agreement by Sigma Designs.

3.4.6 Setup Route View

The

Setup Route

view has a

Menu Bar

routes between nodes.

The Menu Bar has two items:

Menu item

Description

Assign

To assign routes via nodes

Delete

To delete assigned

Source Node list and

Destination Node list

network respectively.

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained he

edited, copied or circulated without prior written agreement by Sigma Designs.

Menu Bar

, Source Node list and

Destination Node list

Description

To assign routes via nodes

To delete assigned

routes

Figure 11. Setup Route view

Destination Node list

show the

lists of source and destination nodes in a routed

B3 Z-Wave USB Adapter

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained he

rein this document. It may not be

Destination Node list

. It is used to set up

lists of source and destination nodes in a routed

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained he

edited, copied or circulated without prior written agreement by Sigma Designs.

3.4.7 ERTT

Z-Wave PC Controller has the

Enhanced Reliability Test Tool

through the

Categories

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained he

edited, copied or circulated without prior written agreement by Sigma Designs.

Enhanced Reliability Test Tool

imp

lemented. It can be activated as a tab

through Ctrl+E keyboard shortcut.

Figure 12. ERTT

B3 Z-Wave USB Adapter

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained he

rein this document. It may not be

lemented. It can be activated as a tab

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained he

edited, copied or circulated without prior written agreement by Sigma Designs.

3.4.8 Log View

Here output of current actions is recorded. The two tabs, Actions and Packets, show full

about what is happening within the PC Controller.

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained he

edited, copied or circulated without prior written agreement by Sigma Designs.

Here output of current actions is recorded. The two tabs, Actions and Packets, show full

about what is happening within the PC Controller.

Figure 13. Log View

B3 Z-Wave USB Adapter

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained he

rein this document. It may not be

Here output of current actions is recorded. The two tabs, Actions and Packets, show full

information

UZB3 Z-Wave USB Adapter

1 1

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained herein this document. It may not be

edited, copied or circulated without prior written agreement by Sigma Designs.

3.4.9 Log View

Status Bar

displays Home ID, controller node ID and Command queue status.

Figure 14. Status Bar

UZB3 Z-Wave USB Adapter

1 1

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained herein this document. It may not be

edited, copied or circulated without prior written agreement by Sigma Designs.

4. FCC NOTICE TO USERS

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC Caution

Any changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter.

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained he

edited, copied or circulated without prior written agreement by Sigma Designs.

EU DECLARATION OF CONFORMITY

EU Declaration of Conformity

This device complies with the essential requirements

test methods have been applied in order to prove presumption of conformity with the essential

requirements of the R&TTE Directive 1999/5/EC:

(Safety)

EN 60950-

1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013

Safety of Information Technology Equipment

(MPE)

EN 62479:2010

Assessment of the compliance of low power electronic and electrical equipment with the basic

restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)

(Radio)

EN 300 220-1 V2.4.1:2012

Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD);

Radio equipment to be used in the 25MHz to 1000MHz frequency range with power levels ranging

up to 500mW; Part 1: Technical characteristics and

EN 300 220-2 V2.4.1:2012

Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD);

Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging

up to 500 mW; Part 2: Harmonize

R&TTE Directive

(EMC)

EN 301 489-1 V1.9.2:2011

Electromagnetic compatibility and Radio spectrum Matters (ERM)

(EMC) standard for radio equipment and services;

EN 301 489-3 V1.6.1:2013

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic

(EMC) standard for radio equipment and services; Part 3: Specific conditions for Short

(SRD) operating on frequencies between 9 kHz and 246 GHz

0560

All information are correct at the time of release. Sigma Designs owns the proprietary rights to the information contained he

edited, copied or circulated without prior written agreement by Sigma Designs.

EU DECLARATION OF CONFORMITY

EU Declaration of Conformity

This device complies with the essential requirements

of the R&TTE Directive 1999/5/EC. The following

test methods have been applied in order to prove presumption of conformity with the essential

requirements of the R&TTE Directive 1999/5/EC:

1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013

Safety of Information Technology Equipment

Assessment of the compliance of low power electronic and electrical equipment with the basic

restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)

Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD);

Radio equipment to be used in the 25MHz to 1000MHz frequency range with power levels ranging

up to 500mW; Part 1: Technical characteristics and

test methods

Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD);

Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging

up to 500 mW; Part 2: Harmonize

d EN covering essential requirements under article 3.2 of the

Electromagnetic compatibility and Radio spectrum Matters (ERM)

; ElectroMagnetic Compatibility

(EMC) standard for radio equipment and services;

Part 1: Common technical requirements