Signify North America SNS400 Occupancy and Daylight Sensor Lighting Control User Manual 2 of 2

Philips Lighting North America Corporation Occupancy and Daylight Sensor Lighting Control 2 of 2

Contents

User manual 2 of 2

SensorsEasySenseFixture-Mount Philips EasySense Quick Installation GuideCommercial Product Name Order CodeEasySense Fixture-Mount Sensor SNS102 SNS200 SNS201SNS300Connection ColorWhite NeutralBlack LineGreen GroundPurple SR+Brown SR-Compatible LED DriversSensor Part NumberDriver Model Number DescriptionXI040C110V054VPT1 Xitanium 40W 0.1-1.1A 27-54V 120-277V SRXI075C200V054VPT1 Xitanium 75W 0.1-2.0A 27-54V 120-277V SRSpecications available at www.philips.com/XitaniumSR. Note: Below data applicable only for SNS200. Refer to Certied partner documentation for information applicable to SNS300.Wiring DiagramXITANIUM SR LED DRIVEREASYSENSE LED+LED+LED-LED-RSET2SGNDNFC ANTENNASR-Connectors SR+SRSRLINENEUTRALGROUND NCConnectors(non-polarized) Use 18AWG solid copper wire, rated >=600V/90C. Strip wire to 3/8”.Electrical InformationInput Voltage Powered by SR driver low-voltage interfaceCurrent Consumption 13mANominal Power Consumption 200mWStandby Power < 1 W on luminaire level, including driver standby powerOccupancy SensingType Passive infrared (PIR)Enable/Disable Default enabledDetection O/Auto-on; Red LED indicates “on”Eco On Level 0-100%Hold Time 0.5-60 minutesViewing Angle X=72°, Y = 86° ( See detection pattern)Background Light Level 0-100%Prolong Time 0 minutes - innityGrace Fading 0-25 secResponse Time/Fading to Switch On/O 0.7SecDaylight SensingEnable/Disable Default enabledAuto-calibration Upon power-upViewing Angle 40° (half value sensitivity); 2% cut-o point at 75°Task TuningFull Light Setting 0-100%Environment & ApprobationOperating Ambient Temperature Range 0°C to 55°COperating Humidity 0–95% non condensingStorage Temperature -25°C to 85°CStorage Humidity 0-95% non condensingMax Case Temperature (Tcase) 55°CAgency Approbations UL, CSA; FCC; Tested and approved for use in plenumsCertication California Title 20Limited Warranty 5 yearsDigital Interface Xitanium SROtherStatus Indicators Red, Yellow. Yellow LED on: Vacancy & Sensor is functional; Red LED on: Motion is detectedNo. Drivers per Sensor Four (max)Field Conguration via NFC or IR. Parameters set via Philips eld apps© 2018 Philips Lighting Holding B.V. All rights reserved. Philips reserves the right to make changes in specications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication.philips.com/easysensePhilips Lighting North America Corporation10275 W. Higgins Road, Rosemont IL 60018Tel: 800-322-2086 Fax: 888-423-1882Customer/Technical Service: 800-372-3331OEM Support: 866-915-5886Philips Lighting Canada Ltd.281 Hillmount Rd, Markham, ON, Canada L6C 2S3Tel. 800-668-9008PLt-15142QG_EasySense QIG_RevD_061818 06/18 page 1 of 2Document #: 4435 631 00371 REV. DOperation and Conguration via Mobile App EasySense operates immediately upon installation and energization without further commissioning. If changes from default settings are desired, EasySense can be congured via Philips eld apps through NFC or IR. For a complete description of the features and default settings—as well as details on the app—refer to www.philips.com/easysense. FCC and IC Statement This device complies with part 15 of the FCC rules for the United States and Industry Canada (IC) license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modications not expressly approved by Philips could void the user’s authority to operate this equipment. This product is intended for commercial use only.This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.Déclaration De Conformité À La Fcc/Ic Ce dispositif est conforme à la partie 15 des règles de la Federal Communications Commission (FCC) des États-Unis et d’Industrie Canada (IC) exempts de licence RSS norme(s). Son fonctionnement est assujetti aux deux conditions suivantes : (1) Ce dispositif ne doit pas provoquer de brouillage préjudiciable, et (2) il doit accepter tout brouillage reçu, y compris le brouillage pouvant entraîner un mauvais fonctionnement. Tous les changements ou modications non expressément approuvés par Philips, sont susceptibles d’annuler le droit de l’utilisateur à se servir de cet équipement. Ce produit est exclusivement destiné à un usage commercial.Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.Connection ColorRed LED+Blue LED-Orange RSET2Green SGND
1.72 [43.8] MAX 0.96 [24.3] MAX0.66 [16.8] MAX1.97 [50.0] MAX0.30 [7.5] MAX0.75 [19.0] MAX1.73 [44.0]0.67 [17.0]R0.09 [2.3]1.71 [43.5] 1.71 [43.5]0.63 [16.0]0.63 [16.0]Sensor Dimensions (in/mm)Mounting Dimensions (in/mm)Mounting in U-shaped slot in sheet metal (max thickness 1 mm)Mounting in cut-out in sheet metal (thickness 0.7 mm to 1.0 mm)Fixture with EasySense installed Mounting in a slot Mounting in a cut-out with mounting ring Note: Consult factory for accessory mounting ring to secure sensor to cut-out. Accessory Mounting Ring• Part Number SMR-50 / Set of 50.• Ordered separately, not included.Accessory Mounting Bracket• Part Number SMB-50 / Set of 50.• - Ordered separately, not included.

Navigation menu