Signify North America SNS400 Occupancy and Daylight Sensor Lighting Control User Manual 2 of 2

Download:
Mirror Download [FCC.gov]
Document ID	3978622
Application ID	yB1glirFkCcpHWe8chwiwQ==
Document Description	User manual 2 of 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	79.62kB (995217 bits)
Date Submitted	2018-08-27 00:00:00
Date Available	2018-08-27 00:00:00
Creation Date	2018-06-19 13:24:18
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2018-06-19 13:24:22
Document Title	User manual 2 of 2
Document Creator	Adobe InDesign CC 13.0 (Macintosh)

Note: Below data applicable only for SNS200. Refer to Certified partner documentation for information applicable to SNS300.
Electrical Information
Input Voltage
Current Consumption
Nominal Power Consumption
Standby Power
Occupancy Sensing
Type
Enable/Disable
Powered by SR driver low-voltage interface
13mA
200mW
< 1 W on luminaire level, including driver standby power
Passive infrared (PIR)
Default enabled
Detection
Eco On Level
Hold Time
Viewing Angle
Background Light Level
Prolong Time
Grace Fading
Response Time/Fading to Switch On/Off
Daylight Sensing
Enable/Disable
Auto-calibration
Viewing Angle
Task Tuning
Full Light Setting
Environment & Approbation
Operating Ambient Temperature Range
Operating Humidity
Storage Temperature
Storage Humidity
Max Case Temperature (Tcase)
Agency Approbations
Certification
Limited Warranty
Digital Interface
Other
Status Indicators
No. Drivers per Sensor
Field Configuration
Off/Auto-on; Red LED indicates “on”
0-100%
0.5-60 minutes
X=72°, Y = 86° ( See detection pattern)
0-100%
0 minutes - infinity
0-25 sec
0.7Sec
Default enabled
Upon power-up
40° (half value sensitivity); 2% cut-off point at 75°
Sensors
EasySense
Fixture-Mount
0-100%
0°C to 55°C
0–95% non condensing
-25°C to 85°C
0-95% non condensing
55°C
UL, CSA; FCC; Tested and approved for use in plenums
California Title 20
5 years
Xitanium SR
Red, Yellow. Yellow LED on: Vacancy & Sensor is functional;
Red LED on: Motion is detected
Four (max)
via NFC or IR. Parameters set via Philips field apps
Operation and Configuration via Mobile App
EasySense operates immediately upon installation and energization without further commissioning. If changes from
default settings are desired, EasySense can be configured via Philips field apps through NFC or IR. For a complete
description of the features and default settings—as well as details on the app—refer to www.philips.com/easysense.
FCC and IC Statement
This device complies with part 15 of the FCC rules for the United States and Industry Canada (IC) license-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Any
changes or modifications not expressly approved by Philips could void the user’s authority to operate this equipment.
This product is intended for commercial use only.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Philips EasySense Quick Installation Guide
Sensor Part Number
Commercial Product Name
Order Code
EasySense Fixture-Mount Sensor
SNS102
SNS200
SNS201
SNS300
Compatible LED Drivers
Driver Model Number
Description
XI040C110V054VPT1
Xitanium 40W 0.1-1.1A 27-54V 120-277V SR
XI075C200V054VPT1
Xitanium 75W 0.1-2.0A 27-54V 120-277V SR
Specifications available at www.philips.com/XitaniumSR.
Wiring Diagram
Déclaration De Conformité À La Fcc/Ic
Ce dispositif est conforme à la partie 15 des règles de la Federal Communications Commission (FCC) des États-Unis et
d’Industrie Canada (IC) exempts de licence RSS norme(s). Son fonctionnement est assujetti aux deux conditions suivantes
: (1) Ce dispositif ne doit pas provoquer de brouillage préjudiciable, et (2) il doit accepter tout brouillage reçu, y compris
le brouillage pouvant entraîner un mauvais fonctionnement. Tous les changements ou modifications non expressément
approuvés par Philips, sont susceptibles d’annuler le droit de l’utilisateur à se servir de cet équipement. Ce produit est
exclusivement destiné à un usage commercial.
Connectors
EASYSENSE
Connectors
(non-polarized)
Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.
© 2018 Philips Lighting Holding B.V. All rights reserved.
Philips reserves the right to make changes in specifications
and/or to discontinue any product at any time without notice
or obligation and will not be liable for any consequences
resulting from the use of this publication.
philips.com/easysense
PLt-15142QG_EasySense QIG_RevD_061818
Document #: 4435 631 00371 REV. D
06/18
page 1 of 2
Philips Lighting North America Corporation
10275 W. Higgins Road, Rosemont IL 60018
Tel: 800-322-2086 Fax: 888-423-1882
Customer/Technical Service: 800-372-3331
OEM Support: 866-915-5886
Philips Lighting Canada Ltd.
281 Hillmount Rd, Markham, ON, Canada L6C 2S3
Tel. 800-668-9008
SR
SR
SRSR+
Use 18AWG solid copper wire,
rated >=600V/90C.
Strip wire to 3/8”.
GROUND
LINE
NEUTRAL
Connection
Color
Connection
Color
White
Neutral
Red
LED+
Black
Line
Blue
LED-
Green
Ground
Orange
RSET2
Purple
SR+
Green
SGND
Brown
SR-
NC
XITANIUM SR
LED DRIVER
NFC ANTENNA
LED+
LED+
LEDLEDRSET2
SGND
Sensor Dimensions (in/mm)
Fixture with EasySense installed
1.72 [43.8] MAX
0.66 [16.8] MAX
1.97 [50.0] MAX
0.30 [7.5] MAX
Mounting in a slot
0.75 [19.0] MAX
0.96 [24.3] MAX
Mounting Dimensions (in/mm)
Mounting in U-shaped slot in sheet metal (max thickness 1 mm)
1.71 [43.5]
1.71 [43.5]
0.63 [16.0]
0.63 [16.0]
Mounting in a cut-out with mounting ring
Mounting in cut-out in sheet metal (thickness 0.7 mm to 1.0 mm)
1.73 [44.0]
Note: Consult factory for accessory
mounting ring to secure sensor to cut-out.
R0.09 [2.3]
0.67 [17.0]
Accessory Mounting Ring
•
Part Number SMR-50 / Set of 50.
•
Ordered separately, not included.
Accessory Mounting Bracket
•
Part Number SMB-50 / Set of 50.
•
- Ordered separately, not included.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c143 79.161210, 2017/08/11-10:28:36
Create Date                     : 2018:06:19 13:24:18-05:00
Metadata Date                   : 2018:06:19 13:24:22-05:00
Modify Date                     : 2018:06:19 13:24:22-05:00
Creator Tool                    : Adobe InDesign CC 13.0 (Macintosh)
Instance ID                     : uuid:c5bca1b7-707c-214b-874b-99a97624f314
Original Document ID            : xmp.did:16eac79c-1ca8-4de0-905c-7a864c64a44e
Document ID                     : xmp.id:f42f4fa6-635b-4c8c-aa8e-5d15a1d18f94
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:235dca21-f7d6-42d6-963a-cd7e5395bd5b
Derived From Document ID        : xmp.did:2dbcc336-b73b-47ff-b487-35d5100f1c15
Derived From Original Document ID: xmp.did:16eac79c-1ca8-4de0-905c-7a864c64a44e
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 13.0 (Macintosh)
History Changed                 : /
History When                    : 2018:06:19 13:24:18-05:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CC 13.0 (Macintosh)

EXIF Metadata provided by EXIF.tools