Signify North America SNSS Ceiling Luminaire mounted light sensor User Manual QIG EasySense SNS441 A03 rev

Philips Lighting North America Corporation Ceiling Luminaire mounted light sensor QIG EasySense SNS441 A03 rev

Contents

QIG_EasySense SNS441_A03_rev

TransceiverEasySenseCeiling-Mount Philips EasySense Quick Installation GuideCommercial Product Name Order CodeEasySense Ceiling-Mount Sensor SNS102CMP (514851) SNS200CMP (516666) SNS300CMP (517839)SNS441CMPConnection ColorWhite NeutralBlack LineGreen GroundPurple SR+Brown SR-Compatible LED DriversSensor Part NumberDriver Model Number DescriptionXI040C110V054VPT1 Xitanium 40W 0.1-1.1A 27-54V 120-277V SRXI075C200V054VPT1 Xitanium 75W 0.1-2.0A 27-54V 120-277V SRSpecications available at www.philips.com/XitaniumSR. Wiring DiagramXITANIUM SR LED DRIVERLED+LED+LED-LED-RSET2SGNDNFC ANTENNASR-Connectors SR+REDWHITELINENEUTRALGROUND NC36-inch 18AWG solid lead wires in plenum-rated jacket from sensor stripped to 3/8". Connect white wire to brown (SR-) and red wire to purple (SR+) on driver.Four drivers per sensor maximum.Polarity must be maintained.EASYSENSEElectrical InformationInput Voltage Powered by SR driver low-voltage interfaceCurrent Consumption 13mANominal Power Consumption 200mWStandby Power < 1 W on luminaire level, including driver standby powerEnvironment & ApprobationOperating Ambient Temperature Range 0°C to 55°COperating Humidity 0 – 95% non condensingStorage Temperature -25°C to 85°CStorage Humidity 0-95% non condensingMax Case Temperature (Tcase) 55°CAgency Approbations UL, CSA; Tested and approved for use in plenums; For use in non-fire-rated installations onlyCertication California Title 20Limited Warranty 5 yearsDigital Interface Xitanium SROtherStatus Indicators NoneNo. Drivers per Sensor Four drivers per sensor maximum; Wiring polarity must be maintainedField Conguration via NFC ior IR. Parameters set via Philips eld apps© 2018 Philips Lighting Holding B.V. All rights reserved. Philips reserves the right to make changes in specications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication.philips.com/easysensePhilips Lighting North America Corporation10275 W. Higgins Road, Rosemont IL 60018Tel: 800-322-2086 Fax: 888-423-1882Customer/Technical Service: 800-372-3331OEM Support: 866-915-5886Philips Lighting Canada Ltd.281 Hillmount Rd, Markham, ON, Canada L6C 2S3Tel. 800-668-9008PLt-1621QG_EasySenseCMP QIG 08/18Document #: 4435 290 61451 REV. CNote: Below data applicable only for SNS102CMP and SNS200CMP. Refer to partner documentation for information applicable to SNS300CMP.Connection ColorRed LED+Blue LED-Orange RSET2Green SGNDOperation and Conguration via Mobile App EasySense operates immediately upon installation and energization without further commissioning. If changes from default settings are desired, EasySense can be congured via Philips eld apps through NFC or IR. For a complete description of the features and default settings—as well as details on the app—refer to www.philips.com/easysense. FCC and IC Statement This device complies with part 15 of the FCC rules for the United States and Industry Canada (IC) license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modications not expressly approved by Philips could void the user’s authority to operate this equipment.This product is intended for commercial use only.This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.Déclaration De Conformité À La Fcc/Ic Ce dispositif est conforme à la partie 15 des règles de la Federal Communications Commission (FCC) des États-Unis et d’Industrie Canada (IC) exempts de licence RSS norme(s). Son fonctionnement est assujetti aux deux conditions suivantes : (1) Ce dispositif ne doit pas provoquer de brouillage préjudiciable, et (2) il doit accepter tout brouillage reçu, y compris le brouillage pouvant entraîner un mauvais fonctionnement. Tous les changements ou modications non expressément approuvés par Philips, sont susceptibles d’annuler le droit de l’utilisateur à se servir de cet équipement. Ce produit est exclusivement destiné à un usage commercial.Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.Note: Below data applicable only for SNS102CMP, SNS200CMP and SNS441CMP. Refer to partner documentation for information applicable to SNS300CMP.
Transceiver Dimensions (in/mm) InstallationConguring Sensor ParametersStep 1: Drill 2.5-inch hole in ceiling. It may be more practical to remove the ceiling tile and drill from the backside depending on material.Step 3: Compress spring clips on sensor and insert into ceiling hole.Step 5: Connect the wires from the sensor to the LED Driver in the xture. Connect the white wire from the sensor to the brown (SR-) terminal on the driver. Connect the red wire from the sensor to the purple (SR+) terminal on the driver. Follow xture manufacturer’s instructions for accessing the driver.EasySense operates upon energization with no further commissioning. See Transceiver datasheet for sensor presets and parameters that can be changed during installation. Refer to “Operation and Configuration via Mobile App” on last page for further details.Step 2: Feed wires from sensor into ceiling hole. Wire length provided is 36-inches. Cable jacket provided is plenum-rated. Add additional wire length if necessary (18AWG solid wire recommended).Step 4: Sensor will clamp into place. Turn sensor to appropriate position. Notes:1. For use in non-fire-rated installations only.2. Remove power from fixtures/drivers before performing any electrical work.3. Up to (4) drivers maximum can be connected to (1) EasySense. Polarity must be maintained.Ø 2.480 (63) REF.Ø 2.913 (74) REF.1.811 (46) REF.1.240 (31.5) REF.

Navigation menu