Signify North America SNSS Ceiling Luminaire mounted light sensor User Manual QIG EasySense SNS441 A03 rev
Philips Lighting North America Corporation Ceiling Luminaire mounted light sensor QIG EasySense SNS441 A03 rev
Contents
- 1. QIG_EasySense SNS441_A03_rev
- 2. User Manual_20200204_v1 - 11_QIG_EasySense SNS441_A01[1]
QIG_EasySense SNS441_A03_rev
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3981596 |
| Application ID | hBe1b5UZre+3l1QWskkU0w== |
| Document Description | QIG_EasySense SNS441_A03_rev |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 124.98kB (1562235 bits) |
| Date Submitted | 2018-08-28 00:00:00 |
| Date Available | 2018-08-28 00:00:00 |
| Creation Date | 2018-08-28 14:44:08 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2018-08-28 15:16:30 |
| Document Title | QIG_EasySense SNS441_A03_rev |
| Document Creator | Adobe InDesign CC 13.1 (Macintosh) |
Note: Below data applicable SNS200CMP. to partner documentation for informationfor Note: applicable only onlyfor forSNS102CMP SNS102CMP,and SNS200CMP and Refer SNS441CMP. Refer to partner documentation applicable toapplicable SNS300CMP. information to SNS300CMP. Electrical Information Input Voltage Current Consumption Nominal Power Consumption Standby Power Environment & Approbation Operating Ambient Temperature Range Operating Humidity Storage Temperature Storage Humidity Max Case Temperature (Tcase) Agency Approbations Certification Limited Warranty Digital Interface Other Status Indicators No. Drivers per Sensor Field Configuration Powered by SR driver low-voltage interface 13mA 200mW < 1 W on luminaire level, including driver standby power 0°C to 55°C 0 – 95% non condensing -25°C to 85°C 0-95% non condensing 55°C UL, CSA; Tested and approved for use in plenums; For use in non-fire-rated installations only California Title 20 5 years Xitanium SR None Four drivers per sensor maximum; Wiring polarity must be maintained via NFC ior IR. Parameters set via Philips field apps Operation and Configuration via Mobile App EasySense operates immediately upon installation and energization without further commissioning. If changes from default settings are desired, EasySense can be configured via Philips field apps through NFC or IR. For a complete description of the features and default settings—as well as details on the app—refer to www.philips.com/easysense. Transceiver EasySense Ceiling-Mount Philips EasySense Quick Installation Guide FCC and IC Statement This device complies with part 15 of the FCC rules for the United States and Industry Canada (IC) license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by Philips could void the user’s authority to operate this equipment. This product is intended for commercial use only. Sensor Part Number This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Commercial Product Name Order Code EasySense Ceiling-Mount Sensor SNS102CMP (514851) SNS200CMP (516666) SNS300CMP (517839) SNS441CMP Déclaration De Conformité À La Fcc/Ic Ce dispositif est conforme à la partie 15 des règles de la Federal Communications Commission (FCC) des États-Unis et d’Industrie Canada (IC) exempts de licence RSS norme(s). Son fonctionnement est assujetti aux deux conditions suivantes : (1) Ce dispositif ne doit pas provoquer de brouillage préjudiciable, et (2) il doit accepter tout brouillage reçu, y compris le brouillage pouvant entraîner un mauvais fonctionnement. Tous les changements ou modifications non expressément approuvés par Philips, sont susceptibles d’annuler le droit de l’utilisateur à se servir de cet équipement. Ce produit est exclusivement destiné à un usage commercial. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps. Compatible LED Drivers Driver Model Number Description XI040C110V054VPT1 Xitanium 40W 0.1-1.1A 27-54V 120-277V SR XI075C200V054VPT1 Xitanium 75W 0.1-2.0A 27-54V 120-277V SR Specifications available at www.philips.com/XitaniumSR. Wiring Diagram Connectors EASYSENSE WHITE RED SRSR+ GROUND LINE NEUTRAL © 2018 Philips Lighting Holding B.V. All rights reserved. Philips reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication. philips.com/easysense PLt-1621QG_EasySenseCMP QIG 08/18 Document #: 4435 290 61451 REV. C Philips Lighting North America Corporation 10275 W. Higgins Road, Rosemont IL 60018 Tel: 800-322-2086 Fax: 888-423-1882 Customer/Technical Service: 800-372-3331 OEM Support: 866-915-5886 Philips Lighting Canada Ltd. 281 Hillmount Rd, Markham, ON, Canada L6C 2S3 Tel. 800-668-9008 36-inch 18AWG solid lead wires in plenum-rated jacket from sensor stripped to 3/8". Connect white wire to brown (SR-) and red wire to purple (SR+) on driver. Four drivers per sensor maximum. Polarity must be maintained. NC LED+ LED+ LEDLEDRSET2 SGND XITANIUM SR LED DRIVER NFC ANTENNA Connection Color Connection Color White Neutral Red LED+ Black Line Blue LED- Green Ground Orange RSET2 Purple SR+ Green SGND Brown SR- Transceiver Dimensions (in/mm) Installation Notes: 1. For use in non-fire-rated installations only. 2. Remove power from fixtures/drivers before performing any electrical work. 3. Up to (4) drivers maximum can be connected to (1) EasySense. Polarity must be maintained. 1.240 (31.5) REF. Step 1: Drill 2.5-inch hole in ceiling. It may be more practical to remove the ceiling tile and drill from the backside depending on material. Step 2: Feed wires from sensor into ceiling hole. Wire length provided is 36-inches. Cable jacket provided is plenum-rated. Add additional wire length if necessary (18AWG solid wire recommended). Step 3: Compress spring clips on sensor and insert into ceiling hole. Step 4: Sensor will clamp into place. Turn sensor to appropriate position. 1.811 (46) REF. EF )R Ø 48 2. (6 EF )R 74 3( Ø 2.9 Step 5: Connect the wires from the sensor to the LED Driver in the fixture. Connect the white wire from the sensor to the brown (SR-) terminal on the driver. Connect the red wire from the sensor to the purple (SR+) terminal on the driver. Follow fixture manufacturer’s instructions for accessing the driver. Configuring Sensor Parameters EasySense operates upon energization with no further commissioning. See Transceiver datasheet for sensor presets and parameters that can be changed during installation. Refer to “Operation and Configuration via Mobile App” on last page for further details.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : Yes Create Date : 2018:08:28 14:44:08+02:00 Creator : Adobe InDesign CC 13.1 (Macintosh) Modify Date : 2018:08:28 15:16:30+02:00 Language : en-US XMP Toolkit : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08 Metadata Date : 2018:08:28 15:16:30+02:00 Creator Tool : Adobe InDesign CC 13.1 (Macintosh) Instance ID : uuid:c6f8c30d-e567-4906-8452-955ecb4c4fe4 Original Document ID : xmp.did:cda8f468-0299-4fd5-ba3a-9c03fef308ae Document ID : xmp.id:3043b3df-8f44-4446-b0ef-863a60176033 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:45ba1640-48f6-4fb3-99de-3af4f3411735 Derived From Document ID : xmp.did:d59c54b3-372d-46b3-a656-e9f742bfa612 Derived From Original Document ID: xmp.did:cda8f468-0299-4fd5-ba3a-9c03fef308ae Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 13.1 (Macintosh) History Changed : / History When : 2018:08:28 14:44:08+02:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 2EXIF Metadata provided by EXIF.tools