Silicon Laboratories Finland BGM13P BGM13P Bluetooth 5.0 module User Manual Installation Instructions

Silicon Laboratories Finland Oy BGM13P Bluetooth 5.0 module Installation Instructions

Contents

Installation Instructions

BGM13P Blue Gecko Bluetooth ® ModuleData SheetThe BGM13P Blue Gecko Bluetooth ® Module (BGM13P) is a small form factor, certifiedmodule, enabling rapid development of Bluetooth Low Energy solutions.Based on the Silicon Labs EFR32BG13 Blue Gecko SoC, the BGM13P combines an en-ergy- efficient, Bluetooth wireless SoC with a proven RF/antenna design and Bluetooth 5compliant Bluetooth stack. This integration accelerates time-to-market and saves monthsof engineering effort and development costs. In addition, common software and develop-ment tools enable seamless migration between modules, SIPs and SoC based designs.BGM13P modules can be used in a wide variety of applications:KEY FEATURES• Bluetooth 5 low energy compliant• Integrated antenna or U.FL connector• TX power up to 8 dBm• RX sensitivity: -95 dBm• Range: up to 200 meters• 32-bit ARM® Cortex®-M4 core at 38.4MHz• Flash memory: 512 kB• RAM: 64 kB• Autonomous Hardware Crypto Acceleratorand Random Number Generator• Integrated DC-DC Converter• Onboard Bluetooth stack• IoT end devices and gateways• Health, sports and wellness devices• Industrial, home and building automation• Smart phone, tablet and PC accessories• BeaconsAntenna Timers and Triggers32-bit busPeripheral Reflex SystemSerial InterfacesI/O Ports Analog I/FLowest power mode with peripheral operational:USARTLow Energy UARTTMI2CExternal InterruptsGeneral Purpose I/OPin ResetPin WakeupADCVDACAnalog ComparatorEM3—StopEM2—Deep SleepEM1—Sleep EM4—Hibernate EM4—ShutoffEM0—ActiveEnergy ManagementBrown-Out DetectorDC-DC ConverterVoltage Regulator Voltage MonitorPower-On ResetOtherCapacitive TouchOp-AmpIDACCRYPTOCRCTrue Random Number GeneratorSMUCore / MemoryARM CortexTM M4 processorwith DSP extensions, FPU and MPUETM Debug Interface RAM Memory LDMA ControllerFlash Program MemoryReal Time Counter and CalendarCryotimerTimer/CounterLow Energy TimerPulse Counter Watchdog TimerProtocol TimerLow Energy Sensor InterfaceRadio TransceiverDEMODAGCIFADCCRCBUFCMODFRCRACIQRF FrontendLNAPA Frequency SynthesizerPGABALUNChip AntennaorU.FL ConnectorMatchingCrystals38.4 MHz32.768 kHzClock ManagementL-FRC OscillatorH-FRC OscillatorAuxiliary H-F RC OscillatorUltra L-F RC OscillatorL-F Crystal OscillatorH-F Crystal Oscillatorsilabs.com | Building a more connected world. Rev. 1.0
1. Feature ListThe BGM13P highlighted features are listed below.•Low Power Wireless System-on-Chip.•High Performance 32-bit 38.4 MHz ARM Cortex®-M4 withDSP instruction and floating-point unit for efficient signalprocessing• Embedded Trace Macrocell (ETM) for advanced debugging• 512 kB flash program memory• 64 kB RAM data memory• 2.4 GHz radio operation• TX power up to 8 dBm•Low Energy Consumption• 9.9 mA RX current• 8.5 mA TX current at 0 dBm output power• 87 μA/MHz in Active Mode (EM0)• 1.4 μA EM2 DeepSleep current (full RAM retention andRTCC running from LFXO)• 1.14 μA EM3 Stop current (State/RAM retention)• Wake on Radio with signal strength detection, preamblepattern detection, frame detection and timeout•High Receiver Performance• -103.2 dBm sensitivity at 125 kbit/s GFSK• -95 dBm sensitivity at 1 Mbit/s GFSK• -91.2 dBm sensitivity at 2 Mbit/s GFSK•Supported Protocols• Bluetooth Low Energy (Bluetooth 5)•Support for Internet Security• General Purpose CRC• True Random Number Generator (TRNG)• 2 × Hardware Cryptographic Accelerators (CRYPTO) forAES 128/256, SHA-1, SHA-2 (SHA-224 and SHA-256) andECC•Regulatory Certifications• FCC• CE• IC / ISEDC• MIC / Telec•Wide selection of MCU peripherals• 12-bit 1 Msps SAR Analog to Digital Converter (ADC)• 2 × Analog Comparator (ACMP)• 2 × Digital to Analog Converter (VDAC)• 3 × Operational Amplifier (Opamp)• Digital to Analog Current Converter (IDAC)• Low-Energy Sensor Interface (LESENSE)• Multi-channel Capacitive Sense Interface (CSEN)• 25 pins connected to analog channels (APORT) shared be-tween analog peripherals• 25 General Purpose I/O pins with output state retention andasynchronous interrupts• 8 Channel DMA Controller• 12 Channel Peripheral Reflex System (PRS)• 2 × 16-bit Timer/Counter• 3 or 4 Compare/Capture/PWM channels• 1 × 32-bit Timer/Counter• 3 Compare/Capture/PWM channels• 32-bit Real Time Counter and Calendar• 16-bit Low Energy Timer for waveform generation• 32-bit Ultra Low Energy Timer/Counter for periodic wake-upfrom any Energy Mode• 16-bit Pulse Counter with asynchronous operation• 2 × Watchdog Timer• 3 × Universal Synchronous/Asynchronous Receiver/Trans-mitter (UART/SPI/SmartCard (ISO 7816)/IrDA/I2S)•Low Energy UART (LEUART™)•2 × I2C interface with SMBus support and address recogni-tion in EM3 Stop•Wide Operating Range• 1.8 V to 3.8 V single power supply• Integrated DC-DC• -40 °C to +85 °C•Dimensions• 12.9 × 15.0 × 2.2 mm (W × L × H)BGM13P Blue Gecko Bluetooth ® Module Data SheetFeature Listsilabs.com | Building a more connected world. Rev. 1.0 | 2
2. Ordering InformationTable 2.1. Ordering InformationOrdering Code Protocol StackFrequency Band@ Max TX Power AntennaFlash(kB)RAM(kB) GPIO PackagingBGM13P22F512GA-V2R Bluetooth LowEnergy2.4 GHz @ 8 dBm Built-in 512 64 25 ReelBGM13P22F512GA-V2 Bluetooth LowEnergy2.4 GHz @ 8 dBm Built-in 512 64 25 TrayBGM13P22F512GE-V2R Bluetooth LowEnergy2.4 GHz @ 8 dBm U.FL 512 64 25 ReelBGM13P22F512GE-V2 Bluetooth LowEnergy2.4 GHz @ 8 dBm U.FL 512 64 25 TrayDevices ship with the Gecko UART DFU bootloader 1.4.1 + NCP application from Bluetooth SDK 2.7.0.0. The firmware settings con-form to the diagram shown in 5.1 Network Co-Processor (NCP) Application with UART Host.BGM13P Blue Gecko Bluetooth ® Module Data SheetOrdering Informationsilabs.com | Building a more connected world. Rev. 1.0 | 3
Table of Contents1. Feature List ................................22. Ordering Information ............................33. System Overview ..............................73.1 Introduction...............................73.2 Radio.................................73.2.1 Antenna Interface ..........................73.2.2 RFSENSE .............................83.2.3 Packet and State Trace ........................83.2.4 Random Number Generator .......................83.3 Power ................................93.3.1 Energy Management Unit (EMU) .....................93.3.2 DC-DC Converter ..........................93.3.3 Power Domains ...........................103.4 General Purpose Input/Output (GPIO)......................103.5 Clocking ................................103.5.1 Clock Management Unit (CMU) ......................103.5.2 Internal Oscillators and Crystals......................103.6 Counters/Timers and PWM .........................113.6.1 Timer/Counter (TIMER) ........................113.6.2 Wide Timer/Counter (WTIMER) ......................113.6.3 Real Time Counter and Calendar (RTCC) ..................113.6.4 Low Energy Timer (LETIMER) ......................113.6.5 Ultra Low Power Wake-up Timer (CRYOTIMER) ................113.6.6 Pulse Counter (PCNT) .........................113.6.7 Watchdog Timer (WDOG) ........................113.7 Communications and Other Digital Peripherals ...................123.7.1 Universal Synchronous/Asynchronous Receiver/Transmitter (USART) .........123.7.2 Low Energy Universal Asynchronous Receiver/Transmitter (LEUART) .........123.7.3 Inter-Integrated Circuit Interface (I2C) ....................123.7.4 Peripheral Reflex System (PRS) .....................123.7.5 Low Energy Sensor Interface (LESENSE) ..................123.8 Security Features.............................123.8.1 GPCRC (General Purpose Cyclic Redundancy Check) ..............123.8.2 Crypto Accelerator (CRYPTO) ......................133.8.3 True Random Number Generator (TRNG) ..................133.8.4 Security Management Unit (SMU) .....................133.9 Analog ................................133.9.1 Analog Port (APORT) .........................133.9.2 Analog Comparator (ACMP) .......................133.9.3 Analog to Digital Converter (ADC) .....................133.9.4 Capacitive Sense (CSEN) ........................133.9.5 Digital to Analog Current Converter (IDAC) ..................14silabs.com | Building a more connected world. Rev. 1.0 | 4
3.9.6 Digital to Analog Converter (VDAC) ....................143.9.7 Operational Amplifiers .........................143.10 Reset Management Unit (RMU) .......................143.11 Core and Memory ............................143.11.1 Processor Core ...........................143.11.2 Memory System Controller (MSC) ....................143.11.3 Linked Direct Memory Access Controller (LDMA) ...............143.12 Memory Map ..............................153.13 Configuration Summary ..........................164. Electrical Specifications ..........................174.1 Electrical Characteristics ..........................174.1.1 Absolute Maximum Ratings .......................184.1.2 Operating Conditions .........................194.1.3 DC-DC Converter ..........................204.1.4 Current Consumption .........................214.1.5 Wake Up Times ...........................244.1.6 Brown Out Detector (BOD) .......................244.1.7 Frequency Synthesizer .........................254.1.8 2.4 GHz RF Transceiver Characteristics ...................264.1.9 Oscillators .............................294.1.10 Flash Memory Characteristics ......................314.1.11 General-Purpose I/O (GPIO) ......................324.1.12 Voltage Monitor (VMON) ........................344.1.13 Analog to Digital Converter (ADC) ....................354.1.14 Current Digital to Analog Converter (IDAC) .................374.1.15 Analog Comparator (ACMP) ......................394.1.16 I2C ...............................414.1.17 USART SPI ............................445. Typical Connection Diagrams ........................465.1 Network Co-Processor (NCP) Application with UART Host ...............465.2 SoC Application .............................466. Layout Guidelines ............................476.1 Module Placement and Application PCB Layout Guidelines ..............476.2 Effect of Plastic and Metal Materials ......................486.3 Locating the Module Close to Human Body ....................486.4 2D Radiation Pattern Plots .........................497. Hardware Design Guidelines ........................517.1 Power Supply Requirements .........................517.2 Reset Functions .............................517.3 Debug and Firmware Updates ........................517.3.1 Programming and Debug Connections ...................517.3.2 Packet Trace Interface (PTI) .......................51silabs.com | Building a more connected world. Rev. 1.0 | 5
8. Pin Definitions ..............................528.1 BGM13P Device Pinout ..........................528.2 GPIO Functionality Table ..........................548.3 Alternate Functionality Overview .......................648.4 Analog Port (APORT) Client Maps .......................749. Package Specifications ..........................839.1 BGM13P Dimensions ...........................839.2 BGM13P Module Footprint .........................839.3 BGM13P Recommended PCB Land Pattern ...................8410. Tape and Reel Specifications ........................8510.1 Tape and Reel Specification ........................8510.2 Reel Material and Dimensions ........................8510.3 Module Orientation and Tape Feed ......................8610.4 Cover Tape Information ..........................8611. Soldering Recommendations ........................8711.1 Soldering Recommendations ........................8712. Certifications ..............................8812.1 Qualified Antenna Types ..........................8812.2 Bluetooth ...............................8812.3 CE .................................8812.4 FCC.................................8912.5 ISED Canada .............................9012.6 Japan ................................9213. Revision History............................. 93silabs.com | Building a more connected world. Rev. 1.0 | 6
3. System Overview3.1 IntroductionThe BGM13P product family combines an energy-friendly MCU with a highly integrated radio transceiver and a high performance, ultrarobust antenna. The devices are well suited for any battery operated application, as well as other system where ultra-small size, reliablehigh performance RF, low-power consumption and easy application development are key requirements. This section gives a short intro-duction to the full radio and MCU system.A detailed block diagram of the BGM13P Bluetooth Smart module is shown in the figure below.Analog PeripheralsClock ManagementHFRCOIDACARM Cortex-M4 Core512 KB ISP FlashProgram Memory64 KB RAMAHBWatchdog TimerRESETnDigital PeripheralsInput MuxPort MapperPort I/O ConfigurationAnalog Comparator12-bit ADC Temp SenseVDDInternal ReferenceIOVDDULFRCOLFXOHFXOMemory Protection UnitLFRCOAPBDMA Controller+-APORTFloating Point UnitEnergy ManagementPAVDD / RFVDD / DVDDVBATbypassVREGVDD / AVDDIOVDDVDAC+-Op-AmpCapacitive TouchLESENSECRCCRYPTOI2CLEUARTUSARTRTC / RTCCPCNTCRYOTIMERTIMERLETIMERPort F Drivers PFnPort D Drivers PDnPort C Drivers PCnPort B Drivers PBnPort ADrivers PAnMux & FBDC-DC ConverterDebug Signals(shared w/GPIO)Brown Out / Power-On ResetReset Management UnitSerial Wire and ETM Debug / ProgrammingAUXHFRCORadio TranscieverRF FrontendPAIQLNABALUNFrequency SynthesizerDEMODAGCIFADCCRCBUFCMODFRCRACPGAAntennaChip AntennaorU.FL ConnectorMatching1V8Voltage RegulatorVoltage MonitorInternal Crystals38.4 MHz Crystal32.768 kHz CrystalFigure 3.1. BGM13P Block Diagram3.2 RadioThe BGM13P features a radio transceiver supporting Bluetooth® low energy protocol.3.2.1 Antenna InterfaceBGM13P module family includes options for either a high-performance, integrated chip antenna (BGM13PxxFxxxGA), or external an-tenna via a U.FL connector (BGM13PxxFxxxGE). The table below includes performance specifications for the integrated chip antenna.BGM13P Blue Gecko Bluetooth ® Module Data SheetSystem Overviewsilabs.com | Building a more connected world. Rev. 1.0 | 7
Table 3.1. Antenna Efficiency and Peak GainParameter With optimal layout NoteEfficiency -2 to -4 dB Antenna efficiency, gain and radiation pattern are highly depend-ent on the application PCB layout and mechanical design. Referto 6. Layout Guidelines for PCB layout and antenna integrationguidelines for optimal performance. Typical efficiency gain is ex-pected to be from -3.5 to -5.5 dB.Peak gain 1 dBi3.2.2 RFSENSEThe RFSENSE module generates a system wakeup interrupt upon detection of wideband RF energy at the antenna interface, providingtrue RF wakeup capabilities from low energy modes including EM2, EM3 and EM4.RFSENSE triggers on a relatively strong RF signal and is available in the lowest energy modes, allowing exceptionally low energy con-sumption. RFSENSE does not demodulate or otherwise qualify the received signal, but software may respond to the wakeup event byenabling normal RF reception.Various strategies for optimizing power consumption and system response time in presence of false alarms may be employed usingavailable timer peripherals.3.2.3 Packet and State TraceThe BGM13P Frame Controller has a packet and state trace unit that provides valuable information during the development phase. Itfeatures:• Non-intrusive trace of transmit data, receive data and state information• Data observability on a single-pin UART data output, or on a two-pin SPI data output• Configurable data output bitrate / baudrate• Multiplexed transmitted data, received data and state / meta information in a single serial data stream3.2.4 Random Number GeneratorThe Frame Controller (FRC) implements a random number generator that uses entropy gathered from noise in the RF receive chain.The data is suitable for use in cryptographic applications.Output from the random number generator can be used either directly or as a seed or entropy source for software-based random num-ber generator algorithms such as Fortuna.BGM13P Blue Gecko Bluetooth ® Module Data SheetSystem Overviewsilabs.com | Building a more connected world. Rev. 1.0 | 8
3.3 PowerThe BGM13P has an Energy Management Unit (EMU) and efficient integrated regulators to generate internal supply voltages. Only asingle external supply voltage is required, from which all internal voltages are created. An integrated DC-DC buck regulator is utilized tofurther reduce the current consumption. Figure 3.2 Power Supply Configuration for +8 dBm Devices on page 9 shows how the exter-nal and internal supplies of the module are connected.DC-DCAnalogDVDDPAVDDRFVDDVDDDigitalRF PARFVREGVDDAVDDI/O InterfacesIOVDDFigure 3.2. Power Supply Configuration for +8 dBm Devices3.3.1 Energy Management Unit (EMU)The Energy Management Unit manages transitions of energy modes in the device. Each energy mode defines which peripherals andfeatures are available and the amount of current the device consumes. The EMU can also be used to turn off the power to unused RAMblocks, and it contains control registers for the dc-dc regulator and the Voltage Monitor (VMON). The VMON is used to monitor multiplesupply voltages. It has multiple channels which can be programmed individually by the user to determine if a sensed supply has fallenbelow a chosen threshold.3.3.2 DC-DC ConverterThe DC-DC buck converter covers a wide range of load currents and provides up to 90% efficiency in energy modes EM0, EM1, EM2and EM3. Patented RF noise mitigation allows operation of the DC-DC converter without degrading sensitivity of radio components.Protection features include programmable current limiting, short-circuit protection, and dead-time protection. The DC-DC converter mayalso enter bypass mode when the input voltage is too low for efficient operation. In bypass mode, the DC-DC input supply is internallyconnected directly to its output through a low resistance switch. Bypass mode also supports in-rush current limiting to prevent inputsupply voltage droops due to excessive output current transients.BGM13P Blue Gecko Bluetooth ® Module Data SheetSystem Overviewsilabs.com | Building a more connected world. Rev. 1.0 | 9
3.3.3 Power DomainsThe BGM13P has two peripheral power domains for operation in EM2 and lower. If all of the peripherals in a peripheral power domainare configured as unused, the power domain for that group will be powered off in the low-power mode, reducing the overall currentconsumption of the device.Table 3.2. Peripheral Power SubdomainsPeripheral Power Domain 1 Peripheral Power Domain 2ACMP0 ACMP1PCNT0 CSENADC0 VDAC0LETIMER0 LEUART0LESENSE I2C0APORT I2C1- IDAC3.4 General Purpose Input/Output (GPIO)BGM13P has up to 25 General Purpose Input/Output pins. Each GPIO pin can be individually configured as either an output or input.More advanced configurations including open-drain, open-source, and glitch-filtering can be configured for each individual GPIO pin.The GPIO pins can be overridden by peripheral connections, like SPI communication. Each peripheral connection can be routed to sev-eral GPIO pins on the device. The input value of a GPIO pin can be routed through the Peripheral Reflex System to other peripherals.The GPIO subsystem supports asynchronous external pin interrupts.3.5 Clocking3.5.1 Clock Management Unit (CMU)The Clock Management Unit controls oscillators and clocks in the BGM13P. Individual enabling and disabling of clocks to all peripheralmodules is performed by the CMU. The CMU also controls enabling and configuration of the oscillators. A high degree of flexibility al-lows software to optimize energy consumption in any specific application by minimizing power dissipation in unused peripherals andoscillators.3.5.2 Internal Oscillators and CrystalsThe BGM13P fully integrates several oscillator sources and two crystals.• The high-frequency crystal oscillator (HFXO) and integrated 38.4 MHz crystal provide a precise timing reference for the MCU andradio.• The low-frequency crystal oscillator (LFXO) and integrated 32.768 kHz crystal provide an accurate timing reference for low energymodes and the real-time-clock circuits.• An integrated high frequency RC oscillator (HFRCO) is available for the MCU system, when crystal accuracy is not required. TheHFRCO employs fast startup at minimal energy consumption combined with a wide frequency range.• An integrated auxilliary high frequency RC oscillator (AUXHFRCO) is available for timing the general-purpose ADC and the SerialWire Viewer port with a wide frequency range.• An integrated low frequency 32.768 kHz RC oscillator (LFRCO) for low power operation where high accuracy is not required.• An integrated ultra-low frequency 1 kHz RC oscillator (ULFRCO) is available to provide a timing reference at the lowest energy con-sumption in low energy modes.BGM13P Blue Gecko Bluetooth ® Module Data SheetSystem Overviewsilabs.com | Building a more connected world. Rev. 1.0 | 10
3.6 Counters/Timers and PWM3.6.1 Timer/Counter (TIMER)TIMER peripherals keep track of timing, count events, generate PWM outputs and trigger timed actions in other peripherals through thePRS system. The core of each TIMER is a 16-bit counter with up to 4 compare/capture channels. Each channel is configurable in oneof three modes. In capture mode, the counter state is stored in a buffer at a selected input event. In compare mode, the channel outputreflects the comparison of the counter to a programmed threshold value. In PWM mode, the TIMER supports generation of pulse-widthmodulation (PWM) outputs of arbitrary waveforms defined by the sequence of values written to the compare registers, with optionaldead-time insertion available in timer unit TIMER_0 only.3.6.2 Wide Timer/Counter (WTIMER)WTIMER peripherals function just as TIMER peripherals, but are 32 bits wide. They keep track of timing, count events, generate PWMoutputs and trigger timed actions in other peripherals through the PRS system. The core of each WTIMER is a 32-bit counter with up to4 compare/capture channels. Each channel is configurable in one of three modes. In capture mode, the counter state is stored in abuffer at a selected input event. In compare mode, the channel output reflects the comparison of the counter to a programmed thresh-old value. In PWM mode, the WTIMER supports generation of pulse-width modulation (PWM) outputs of arbitrary waveforms defined bythe sequence of values written to the compare registers, with optional dead-time insertion available in timer unit WTIMER_0 only.3.6.3 Real Time Counter and Calendar (RTCC)The Real Time Counter and Calendar (RTCC) is a 32-bit counter providing timekeeping in all energy modes. The RTCC includes aBinary Coded Decimal (BCD) calendar mode for easy time and date keeping. The RTCC can be clocked by any of the on-board oscilla-tors with the exception of the AUXHFRCO, and it is capable of providing system wake-up at user defined instances. When receivingframes, the RTCC value can be used for timestamping. The RTCC includes 128 bytes of general purpose data retention, allowing easyand convenient data storage in all energy modes down to EM4H.A secondary RTC is used by the RF protocol stack for event scheduling, leaving the primary RTCC block available exclusively for appli-cation software.3.6.4 Low Energy Timer (LETIMER)The unique LETIMER is a 16-bit timer that is available in energy mode EM2 Deep Sleep in addition to EM1 Sleep and EM0 Active. Thisallows it to be used for timing and output generation when most of the device is powered down, allowing simple tasks to be performedwhile the power consumption of the system is kept at an absolute minimum. The LETIMER can be used to output a variety of wave-forms with minimal software intervention. The LETIMER is connected to the Real Time Counter and Calendar (RTCC), and can be con-figured to start counting on compare matches from the RTCC.3.6.5 Ultra Low Power Wake-up Timer (CRYOTIMER)The CRYOTIMER is a 32-bit counter that is capable of running in all energy modes. It can be clocked by either the 32.768 kHz crystaloscillator (LFXO), the 32.768 kHz RC oscillator (LFRCO), or the 1 kHz RC oscillator (ULFRCO). It can provide periodic Wakeup eventsand PRS signals which can be used to wake up peripherals from any energy mode. The CRYOTIMER provides a wide range of inter-rupt periods, facilitating flexible ultra-low energy operation.3.6.6 Pulse Counter (PCNT)The Pulse Counter (PCNT) peripheral can be used for counting pulses on a single input or to decode quadrature encoded inputs. Theclock for PCNT is selectable from either an external source on pin PCTNn_S0IN or from an internal timing reference, selectable fromamong any of the internal oscillators, except the AUXHFRCO. The module may operate in energy mode EM0 Active, EM1 Sleep, EM2Deep Sleep, and EM3 Stop.3.6.7 Watchdog Timer (WDOG)The watchdog timer can act both as an independent watchdog or as a watchdog synchronous with the CPU clock. It has windowedmonitoring capabilities, and can generate a reset or different interrupts depending on the failure mode of the system. The watchdog canalso monitor autonomous systems driven by PRS.BGM13P Blue Gecko Bluetooth ® Module Data SheetSystem Overviewsilabs.com | Building a more connected world. Rev. 1.0 | 11
3.7 Communications and Other Digital Peripherals3.7.1 Universal Synchronous/Asynchronous Receiver/Transmitter (USART)The Universal Synchronous/Asynchronous Receiver/Transmitter is a flexible serial I/O module. It supports full duplex asynchronousUART communication with hardware flow control as well as RS-485, SPI, MicroWire and 3-wire. It can also interface with devices sup-porting:• ISO7816 SmartCards• IrDA•I2S3.7.2 Low Energy Universal Asynchronous Receiver/Transmitter (LEUART)The unique LEUARTTM provides two-way UART communication on a strict power budget. Only a 32.768 kHz clock is needed to allowUART communication up to 9600 baud. The LEUART includes all necessary hardware to make asynchronous serial communicationpossible with a minimum of software intervention and energy consumption.3.7.3 Inter-Integrated Circuit Interface (I2C)The I2C module provides an interface between the MCU and a serial I2C bus. It is capable of acting as both a master and a slave andsupports multi-master buses. Standard-mode, fast-mode and fast-mode plus speeds are supported, allowing transmission rates from 10kbit/s up to 1 Mbit/s. Slave arbitration and timeouts are also available, allowing implementation of an SMBus-compliant system. Theinterface provided to software by the I2C module allows precise timing control of the transmission process and highly automated trans-fers. Automatic recognition of slave addresses is provided in active and low energy modes.3.7.4 Peripheral Reflex System (PRS)The Peripheral Reflex System provides a communication network between different peripheral modules without software involvement.Peripheral modules producing Reflex signals are called producers. The PRS routes Reflex signals from producers to consumer periph-erals which in turn perform actions in response. Edge triggers and other functionality such as simple logic operations (AND, OR, NOT)can be applied by the PRS to the signals. The PRS allows peripheral to act autonomously without waking the MCU core, saving power.3.7.5 Low Energy Sensor Interface (LESENSE)The Low Energy Sensor Interface LESENSETM is a highly configurable sensor interface with support for up to 16 individually configura-ble sensors. By controlling the analog comparators, ADC, and DAC, LESENSE is capable of supporting a wide range of sensors andmeasurement schemes, and can for instance measure LC sensors, resistive sensors and capacitive sensors. LESENSE also includes aprogrammable finite state machine which enables simple processing of measurement results without CPU intervention. LESENSE isavailable in energy mode EM2, in addition to EM0 and EM1, making it ideal for sensor monitoring in applications with a strict energybudget.3.8 Security Features3.8.1 GPCRC (General Purpose Cyclic Redundancy Check)The GPCRC module implements a Cyclic Redundancy Check (CRC) function. It supports both 32-bit and 16-bit polynomials. The sup-ported 32-bit polynomial is 0x04C11DB7 (IEEE 802.3), while the 16-bit polynomial can be programmed to any value, depending on theneeds of the application.BGM13P Blue Gecko Bluetooth ® Module Data SheetSystem Overviewsilabs.com | Building a more connected world. Rev. 1.0 | 12
3.8.2 Crypto Accelerator (CRYPTO)The Crypto Accelerator is a fast and energy-efficient autonomous hardware encryption and decryption accelerator. EFR32 devices sup-port AES encryption and decryption with 128- or 256-bit keys, ECC over both GF(P) and GF(2m), SHA-1 and SHA-2 (SHA-224 andSHA-256).Supported block cipher modes of operation for AES include: ECB, CTR, CBC, PCBC, CFB, OFB, GCM, CBC-MAC, GMAC and CCM.Supported ECC NIST recommended curves include P-192, P-224, P-256, K-163, K-233, B-163 and B-233.The CRYPTO1 block is tightly linked to the Radio Buffer Controller (BUFC) enabling fast and efficient autonomous cipher operations ondata buffer content. It allows fast processing of GCM (AES), ECC and SHA with little CPU intervention.CRYPTO also provides trigger signals for DMA read and write operations.3.8.3 True Random Number Generator (TRNG)The TRNG module is a non-deterministic random number generator based on a full hardware solution. The TRNG is validated withNIST800-22 and AIS-31 test suites as well as being suitable for FIPS 140-2 certification (for the purposes of cryptographic key genera-tion).3.8.4 Security Management Unit (SMU)The Security Management Unit (SMU) allows software to set up fine-grained security for peripheral access, which is not possible in theMemory Protection Unit (MPU). Peripherals may be secured by hardware on an individual basis, such that only priveleged accesses tothe peripheral's register interface will be allowed. When an access fault occurs, the SMU reports the specific peripheral involved andcan optionally generate an interrupt.3.9 Analog3.9.1 Analog Port (APORT)The Analog Port (APORT) is an analog interconnect matrix allowing access to many analog modules on a flexible selection of pins.Each APORT bus consists of analog switches connected to a common wire. Since many clients can operate differentially, buses aregrouped by X/Y pairs.3.9.2 Analog Comparator (ACMP)The Analog Comparator is used to compare the voltage of two analog inputs, with a digital output indicating which input voltage is high-er. Inputs are selected from among internal references and external pins. The tradeoff between response time and current consumptionis configurable by software. Two 6-bit reference dividers allow for a wide range of internally-programmable reference sources. TheACMP can also be used to monitor the supply voltage. An interrupt can be generated when the supply falls below or rises above theprogrammable threshold.3.9.3 Analog to Digital Converter (ADC)The ADC is a Successive Approximation Register (SAR) architecture, with a resolution of up to 12 bits at up to 1 Msps. The outputsample resolution is configurable and additional resolution is possible using integrated hardware for averaging over multiple samples.The ADC includes integrated voltage references and an integrated temperature sensor. Inputs are selectable from a wide range ofsources, including pins configurable as either single-ended or differential.3.9.4 Capacitive Sense (CSEN)The CSEN module is a dedicated Capacitive Sensing block for implementing touch-sensitive user interface elements such a switchesand sliders. The CSEN module uses a charge ramping measurement technique, which provides robust sensing even in adverse condi-tions including radiated noise and moisture. The module can be configured to take measurements on a single port pin or scan throughmultiple pins and store results to memory through DMA. Several channels can also be shorted together to measure the combined ca-pacitance or implement wake-on-touch from very low energy modes. Hardware includes a digital accumulator and an averaging filter,as well as digital threshold comparators to reduce software overhead.BGM13P Blue Gecko Bluetooth ® Module Data SheetSystem Overviewsilabs.com | Building a more connected world. Rev. 1.0 | 13
3.9.5 Digital to Analog Current Converter (IDAC)The Digital to Analog Current Converter can source or sink a configurable constant current. This current can be driven on an output pinor routed to the selected ADC input pin for capacitive sensing. The full-scale current is programmable between 0.05 µA and 64 µA withseveral ranges consisting of various step sizes.3.9.6 Digital to Analog Converter (VDAC)The Digital to Analog Converter (VDAC) can convert a digital value to an analog output voltage. The VDAC is a fully differential, 500ksps, 12-bit converter. The opamps are used in conjunction with the VDAC, to provide output buffering. One opamp is used per single-ended channel, or two opamps are used to provide differential outputs. The VDAC may be used for a number of different applicationssuch as sensor interfaces or sound output. The VDAC can generate high-resolution analog signals while the MCU is operating at lowfrequencies and with low total power consumption. Using DMA and a timer, the VDAC can be used to generate waveforms without anyCPU intervention. The VDAC is available in all energy modes down to and including EM3.3.9.7 Operational AmplifiersThe opamps are low power amplifiers with a high degree of flexibility targeting a wide variety of standard opamp application areas, andare available down to EM3. With flexible built-in programming for gain and interconnection they can be configured to support multiplecommon opamp functions. All pins are also available externally for filter configurations. Each opamp has a rail to rail input and a rail torail output. They can be used in conjunction with the VDAC module or in stand-alone configurations. The opamps save energy, PCBspace, and cost as compared with standalone opamps because they are integrated on-chip.3.10 Reset Management Unit (RMU)The RMU is responsible for handling reset of the BGM13P. A wide range of reset sources are available, including several power supplymonitors, pin reset, software controlled reset, core lockup reset, and watchdog reset.3.11 Core and Memory3.11.1 Processor CoreThe ARM Cortex-M processor includes a 32-bit RISC processor integrating the following features and tasks in the system:• ARM Cortex-M4 RISC processor achieving 1.25 Dhrystone MIPS/MHz• Memory Protection Unit (MPU) supporting up to 8 memory segments• Up to 512 kB flash program memory• Up to 64 kB RAM data memory• Configuration and event handling of all modules• 2-pin Serial-Wire debug interface3.11.2 Memory System Controller (MSC)The Memory System Controller (MSC) is the program memory unit of the microcontroller. The flash memory is readable and writablefrom both the Cortex-M and DMA. The flash memory is divided into two blocks; the main block and the information block. Program codeis normally written to the main block, whereas the information block is available for special user data and flash lock bits. There is also aread-only page in the information block containing system and device calibration data. Read and write operations are supported in en-ergy modes EM0 Active and EM1 Sleep.3.11.3 Linked Direct Memory Access Controller (LDMA)The Linked Direct Memory Access (LDMA) controller allows the system to perform memory operations independently of software. Thisreduces both energy consumption and software workload. The LDMA allows operations to be linked together and staged, enabling so-phisticated operations to be implemented.BGM13P Blue Gecko Bluetooth ® Module Data SheetSystem Overviewsilabs.com | Building a more connected world. Rev. 1.0 | 14
3.12 Memory MapThe BGM13P memory map is shown in the figures below. RAM and flash sizes are for the largest memory configuration.Figure 3.3. BGM13P Memory Map — Core Peripherals and Code SpaceBGM13P Blue Gecko Bluetooth ® Module Data SheetSystem Overviewsilabs.com | Building a more connected world. Rev. 1.0 | 15
Figure 3.4. BGM13P Memory Map — Peripherals3.13 Configuration SummaryThe features of the BGM13P are a subset of the feature set described in the device reference manual. The table below describes de-vice specific implementation of the features. Remaining modules support full configuration.Table 3.3. Configuration SummaryModule Configuration Pin ConnectionsUSART0 IrDA SmartCard US0_TX, US0_RX, US0_CLK, US0_CSUSART1 IrDA I2S SmartCard US1_TX, US1_RX, US1_CLK, US1_CSUSART2 IrDA SmartCard US2_TX, US2_RX, US2_CLK, US2_CSTIMER0 with DTI TIM0_CC[2:0], TIM0_CDTI[2:0]TIMER1 - TIM1_CC[3:0]WTIMER0 with DTI WTIM0_CC[2:0], WTIM0_CDTI[2:0]BGM13P Blue Gecko Bluetooth ® Module Data SheetSystem Overviewsilabs.com | Building a more connected world. Rev. 1.0 | 16
4. Electrical Specifications4.1 Electrical CharacteristicsAll electrical parameters in all tables are specified under the following conditions, unless stated otherwise:• Typical values are based on TAMB=25 °C and VDD= 3.3 V, by production test and/or technology characterization.• Radio performance numbers are measured in conducted mode, based on Silicon Laboratories reference designs using output pow-er-specific external RF impedance-matching networks for interfacing to a 50 Ω antenna.• Minimum and maximum values represent the worst conditions across supply voltage, process variation, and operating temperature,unless stated otherwise.The BGM13P module has only one external supply pin (VDD). There are several internal supply rails mentioned in the electrical specifi-cations, whose connections vary based on transmit power configuration. Refer to for the relationship between the module's externalVDD pin and internal voltage supply rails.Refer to for more details about operational supply and temperature limits.BGM13P Blue Gecko Bluetooth ® Module Data SheetElectrical Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 17
4.1.1 Absolute Maximum RatingsStresses above those listed below may cause permanent damage to the device. This is a stress rating only and functional operation ofthe devices at those or any other conditions above those indicated in the operation listings of this specification is not implied. Exposureto maximum rating conditions for extended periods may affect device reliability. For more information on the available quality and relia-bility data, see the Quality and Reliability Monitor Report at http://www.silabs.com/support/quality/pages/default.aspx.Table 4.1. Absolute Maximum RatingsParameter Symbol Test Condition Min Typ Max UnitStorage temperature range TSTG -40 — 85 °CVoltage on any supply pin VDDMAX -0.3 — 3.8 VVoltage ramp rate on anysupply pinVDDRAMPMAX — — 1 V / µsDC voltage on any GPIO pin VDIGPIN 5V tolerant GPIO pins1 2 3-0.3 — Min of 5.25and IOVDD+2VStandard GPIO pins -0.3 — IOVDD+0.3 VMaximum RF level at input PRFMAX2G4 — — 10 dBmTotal current into supply pins IVDDMAX Source — — 200 mATotal current into VSSground linesIVSSMAX Sink — — 200 mACurrent per I/O pin IIOMAX Sink — — 50 mASource — — 50 mACurrent for all I/O pins IIOALLMAX Sink — — 200 mASource — — 200 mAJunction temperature TJ-40 — 105 °CNote:1. When a GPIO pin is routed to the analog module through the APORT, the maximum voltage = IOVDD.2. Valid for IOVDD in valid operating range or when IOVDD is undriven (high-Z). If IOVDD is connected to a low-impedance sourcebelow the valid operating range (e.g. IOVDD shorted to VSS), the pin voltage maximum is IOVDD + 0.3 V, to avoid exceeding themaximum IO current specifications.3. To operate above the IOVDD supply rail, over-voltage tolerance must be enabled according to the GPIO_Px_OVTDIS register.Pins with over-voltage tolerance disabled have the same limits as Standard GPIO. BGM13P Blue Gecko Bluetooth ® Module Data SheetElectrical Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 18
4.1.2 Operating ConditionsThe following subsections define the operating conditions for the module.4.1.2.1 General Operating ConditionsTable 4.2. General Operating ConditionsParameter Symbol Test Condition Min Typ Max UnitOperating ambient tempera-ture rangeTA-G temperature grade -40 25 85 °CVDD operating supply volt-ageVVDD DCDC in regulation 2.4 3.3 3.8 VDCDC in bypass, 50mA load 1.8 3.3 3.8 VHFCORECLK frequency fCORE VSCALE2, MODE = WS1 — — 40 MHzVSCALE0, MODE = WS0 — — 20 MHzHFCLK frequency fHFCLK VSCALE2 — — 40 MHzVSCALE0 — — 20 MHzBGM13P Blue Gecko Bluetooth ® Module Data SheetElectrical Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 19
4.1.3 DC-DC ConverterTest conditions: V_DCDC_I=3.3 V, V_DCDC_O=1.8 V, I_DCDC_LOAD=50 mA, Heavy Drive configuration, F_DCDC_LN=7 MHz, un-less otherwise indicated.Table 4.3. DC-DC ConverterParameter Symbol Test Condition Min Typ Max UnitInput voltage range VDCDC_I Bypass mode, IDCDC_LOAD = 50mA1.8 — VVREGVDD_MAXVLow noise (LN) mode, 1.8 V out-put, IDCDC_LOAD = 100 mA, orLow power (LP) mode, 1.8 V out-put, IDCDC_LOAD = 10 mA2.4 — VVREGVDD_MAXVOutput voltage programma-ble range1VDCDC_O 1.8 — VVREGVDD VMax load current ILOAD_MAX Low noise (LN) mode, Medium orHeavy Drive2— — 70 mALow noise (LN) mode, LightDrive2— — 50 mALow power (LP) mode,LPCMPBIASEMxx3 = 0— — 75 µALow power (LP) mode,LPCMPBIASEMxx3 = 3— — 10 mANote:1. Due to internal dropout, the DC-DC output will never be able to reach its input voltage, VVREGVDD.2. Drive levels are defined by configuration of the PFETCNT and NFETCNT registers. Light Drive: PFETCNT=NFETCNT=3; Medi-um Drive: PFETCNT=NFETCNT=7; Heavy Drive: PFETCNT=NFETCNT=15.3. LPCMPBIASEMxx refers to either LPCMPBIASEM234H in the EMU_DCDCMISCCTRL register or LPCMPBIASEM01 in theEMU_DCDCLOEM01CFG register, depending on the energy mode. BGM13P Blue Gecko Bluetooth ® Module Data SheetElectrical Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 20
4.1.4 Current Consumption4.1.4.1 Current Consumption 3.3 V using DC-DC ConverterUnless otherwise indicated, typical conditions are: VDD = 3.3 V. T = 25 °C. Minimum and maximum values in this table represent theworst conditions across supply voltage and process variation at T = 25 °C.Table 4.4. Current Consumption 3.3 V using DC-DC ConverterParameter Symbol Test Condition Min Typ Max UnitCurrent consumption in EM0mode with all peripherals dis-abled, DCDC in Low NoiseDCM mode2IACTIVE_DCM 38.4 MHz crystal, CPU runningwhile loop from flash4— 87 — µA/MHz38 MHz HFRCO, CPU runningPrime from flash— 69 — µA/MHz38 MHz HFRCO, CPU runningwhile loop from flash— 70 — µA/MHz38 MHz HFRCO, CPU runningCoreMark from flash— 82 — µA/MHz26 MHz HFRCO, CPU runningwhile loop from flash— 76 — µA/MHz1 MHz HFRCO, CPU runningwhile loop from flash— 615 — µA/MHzCurrent consumption in EM0mode with all peripherals dis-abled, DCDC in Low NoiseCCM mode1IACTIVE_CCM 38.4 MHz crystal, CPU runningwhile loop from flash4— 97 — µA/MHz38 MHz HFRCO, CPU runningPrime from flash— 80 — µA/MHz38 MHz HFRCO, CPU runningwhile loop from flash— 81 — µA/MHz38 MHz HFRCO, CPU runningCoreMark from flash— 92 — µA/MHz26 MHz HFRCO, CPU runningwhile loop from flash— 94 — µA/MHz1 MHz HFRCO, CPU runningwhile loop from flash— 1145 — µA/MHzCurrent consumption in EM0mode with all peripherals dis-abled and voltage scalingenabled, DCDC in LowNoise CCM mode1IACTIVE_CCM_VS 19 MHz HFRCO, CPU runningwhile loop from flash— 101 — µA/MHz1 MHz HFRCO, CPU runningwhile loop from flash— 1124 — µA/MHzCurrent consumption in EM1mode with all peripherals dis-abled, DCDC in Low NoiseDCM mode2IEM1_DCM 38.4 MHz crystal4— 56 — µA/MHz38 MHz HFRCO — 39 — µA/MHz26 MHz HFRCO — 46 — µA/MHz1 MHz HFRCO — 588 — µA/MHzCurrent consumption in EM1mode with all peripherals dis-abled and voltage scalingenabled, DCDC in LowNoise DCM mode2IEM1_DCM_VS 19 MHz HFRCO — 50 — µA/MHz1 MHz HFRCO — 572 — µA/MHzBGM13P Blue Gecko Bluetooth ® Module Data SheetElectrical Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 21
Parameter Symbol Test Condition Min Typ Max UnitCurrent consumption in EM2mode, with voltage scalingenabled, DCDC in LP mode3IEM2_VS Full 64 kB RAM retention andRTCC running from LFXO— 1.4 — µAFull 64 kB RAM retention andRTCC running from LFRCO— 1.5 — µA1 bank RAM retention and RTCCrunning from LFRCO5— 1.3 — µACurrent consumption in EM3mode, with voltage scalingenabledIEM3_VS Full 64 kB RAM retention andCRYOTIMER running from ULFR-CO— 1.14 — µACurrent consumption inEM4H mode, with voltagescaling enabledIEM4H_VS 128 byte RAM retention, RTCCrunning from LFXO— 0.75 — µA128 byte RAM retention, CRYO-TIMER running from ULFRCO— 0.44 — µA128 byte RAM retention, no RTCC — 0.42 — µACurrent consumption inEM4S modeIEM4S No RAM retention, no RTCC — 0.07 — µANote:1. DCDC Low Noise CCM Mode = Light Drive (PFETCNT=NFETCNT=3), F=6.4 MHz (RCOBAND=4), ANASW=DVDD.2. DCDC Low Noise DCM Mode = Light Drive (PFETCNT=NFETCNT=3), F=3.0 MHz (RCOBAND=0), ANASW=DVDD.3. DCDC Low Power Mode = Medium Drive (PFETCNT=NFETCNT=7), LPOSCDIV=1, LPCMPBIASEM234H=0, LPCLIMILIM-SEL=1, ANASW=DVDD.4. CMU_HFXOCTRL_LOWPOWER=0.5. CMU_LFRCOCTRL_ENVREF = 1, CMU_LFRCOCTRL_VREFUPDATE = 1 BGM13P Blue Gecko Bluetooth ® Module Data SheetElectrical Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 22
4.1.4.2 Current Consumption Using RadioUnless otherwise indicated, typical conditions are: VBATT = 3.3 V. T = 25 °C. DC-DC on. Minimum and maximum values in this tablerepresent the worst conditions across supply voltage and process variation at T = 25 °C.Table 4.5. Current Consumption Using RadioParameter Symbol Test Condition Min Typ Max UnitCurrent consumption in re-ceive mode, active packetreception (MCU in EM1 @38.4 MHz, peripheral clocksdisabled), T ≤ 85 °CIRX_ACTIVE 125 kbit/s, 2GFSK, F = 2.4 GHz,Radio clock prescaled by 4— 10.5 — mA500 kbit/s, 2GFSK, F = 2.4 GHz,Radio clock prescaled by 4— 10.4 — mA1 Mbit/s, 2GFSK, F = 2.4 GHz,Radio clock prescaled by 4— 9.9 — mA2 Mbit/s, 2GFSK, F = 2.4 GHz,Radio clock prescaled by 4— 10.6 — mACurrent consumption in re-ceive mode, listening forpacket (MCU in EM1 @ 38.4MHz, peripheral clocks disa-bled), T ≤ 85 °CIRX_LISTEN 125 kbit/s, 2GFSK, F = 2.4 GHz,No radio clock prescaling— 10.5 — mA500 kbit/s, 2GFSK, F = 2.4 GHz,No radio clock prescaling— 10.5 — mA1 Mbit/s, 2GFSK, F = 2.4 GHz, Noradio clock prescaling— 10.9 — mA2 Mbit/s, 2GFSK, F = 2.4 GHz, Noradio clock prescaling— 11.6 — mACurrent consumption intransmit mode (MCU in EM1@ 38.4 MHz, peripheralclocks disabled), T ≤ 85 °CITX F = 2.4 GHz, CW, 0 dBm outputpower, Radio clock prescaled by 3— 8.5 — mAF = 2.4 GHz, CW, 0 dBm outputpower, Radio clock prescaled by 1— 9.6 — mAF = 2.4 GHz, CW, 3.5 dBm outputpower— 20.2 —F = 2.4 GHz, CW, 8 dBm outputpower— 27.1 — mABGM13P Blue Gecko Bluetooth ® Module Data SheetElectrical Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 23
4.1.5 Wake Up TimesTable 4.6. Wake Up TimesParameter Symbol Test Condition Min Typ Max UnitWakeup time from EM1 tEM1_WU — 3 — AHBClocksWake up from EM2 tEM2_WU Code execution from flash — 10.9 — µsCode execution from RAM — 3.8 — µsWake up from EM3 tEM3_WU Code execution from flash — 10.9 — µsCode execution from RAM — 3.8 — µsWake up from EM4H1tEM4H_WU Executing from flash — 90 — µsWake up from EM4S1tEM4S_WU Executing from flash — 300 — µsTime from release of resetsource to first instruction ex-ecutiontRESET Soft Pin Reset released — 51 — µsAny other reset released — 358 — µsPower mode scaling time tSCALE VSCALE0 to VSCALE2, HFCLK =19 MHz4 2— 31.8 — µsVSCALE2 to VSCALE0, HFCLK =19 MHz3— 4.3 — µsNote:1. Time from wakeup request until first instruction is executed. Wakeup results in device reset.2. VSCALE0 to VSCALE2 voltage change transitions occur at a rate of 10 mV/µs for approximately 20 µs. During this transition,peak currents will be dependent on the value of the DECOUPLE output capacitor, from 35 mA (with a 1 µF capacitor) to 70 mA(with a 2.7 µF capacitor).3. Scaling down from VSCALE2 to VSCALE0 requires approximately 2.8 µs + 29 HFCLKs.4. Scaling up from VSCALE0 to VSCALE2 requires approximately 30.3 µs + 28 HFCLKs. 4.1.6 Brown Out Detector (BOD)Table 4.7. Brown Out Detector (BOD)Parameter Symbol Test Condition Min Typ Max UnitAVDD BOD threshold VAVDDBOD AVDD rising — — 1.8 VAVDD falling (EM0/EM1) 1.62 — — VAVDD falling (EM2/EM3) 1.53 — — VAVDD BOD hysteresis VAVDDBOD_HYST — 20 — mVAVDD BOD response time tAVDDBOD_DELAY Supply drops at 0.1V/µs rate — 2.4 — µsEM4 BOD threshold VEM4DBOD AVDD rising — — 1.7 VAVDD falling 1.45 — — VEM4 BOD hysteresis VEM4BOD_HYST — 25 — mVEM4 BOD response time tEM4BOD_DELAY Supply drops at 0.1V/µs rate — 300 — µsBGM13P Blue Gecko Bluetooth ® Module Data SheetElectrical Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 24
4.1.7 Frequency SynthesizerTable 4.8. Frequency SynthesizerParameter Symbol Test Condition Min Typ Max UnitRF synthesizer frequencyrangefRANGE 2400 - 2483.5 MHz 2400 — 2483.5 MHzLO tuning frequency resolu-tion with 38.4 MHz crystalfRES 2400 - 2483.5 MHz — — 73 HzFrequency deviation resolu-tion with 38.4 MHz crystaldfRES 2400 - 2483.5 MHz — — 73 HzMaximum frequency devia-tion with 38.4 MHz crystaldfMAX 2400 - 2483.5 MHz — — 1677 kHzBGM13P Blue Gecko Bluetooth ® Module Data SheetElectrical Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 25
4.1.8 2.4 GHz RF Transceiver Characteristics4.1.8.1 RF Transmitter General Characteristics for 2.4 GHz BandUnless otherwise indicated, typical conditions are: T = 25 °C, VDD = 3.3 V. DC-DC on. Crystal frequency=38.4 MHz. RF center fre-quency 2.45 GHz. Conducted measurement from the antenna feedpoint.Table 4.9. RF Transmitter General Characteristics for 2.4 GHz BandParameter Symbol Test Condition Min Typ Max UnitMaximum TX power1POUTMAX 8 dBm-rated part numbers — 8 — dBmMinimum active TX Power POUTMIN CW -27 — dBmOutput power step size POUTSTEP -5 dBm< Output power < 0 dBm — 0.8 — dB0 dBm < output power <POUTMAX— 0.5 — dBOutput power variation vssupply at POUTMAXPOUTVAR_V 2.4 V < VVDD < 3.3 V, BGM13P22 — 0.05 — dBOutput power variation vstemperature at POUTMAXPOUTVAR_T From -40 to +85 °C, BGM13P22 — 1.7 — dBOutput power variation vs RFfrequency at POUTMAXPOUTVAR_F Over RF tuning frequency range — 0.3 — dBRF tuning frequency range FRANGE 2400 — 2483.5 MHzNote:1. Supported transmit power levels are determined by the ordering part number (OPN). Transmit power ratings for all devices cov-ered in this datasheet can be found in the Max TX Power column of the Ordering Information Table. 4.1.8.2 RF Receiver General Characteristics for 2.4 GHz BandUnless otherwise indicated, typical conditions are: T = 25 °C, VDD = 3.3 V. DC-DC on. Crystal frequency=38.4 MHz. RF center fre-quency 2.45 GHz. Conducted measurement from the antenna feedpoint.Table 4.10. RF Receiver General Characteristics for 2.4 GHz BandParameter Symbol Test Condition Min Typ Max UnitRF tuning frequency range FRANGE 2400 — 2483.5 MHzReceive mode maximumspurious emissionSPURRX 30 MHz to 1 GHz — -87.3 — dBm1 GHz to 12 GHz — -81.0 — dBmMax spurious emissions dur-ing active receive mode, perFCC Part 15.109(a)SPURRX_FCC 216 MHz to 960 MHz, ConductedMeasurement— -84.2 — dBmAbove 960 MHz, ConductedMeasurement— -73.1 — dBmBGM13P Blue Gecko Bluetooth ® Module Data SheetElectrical Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 26
4.1.8.3 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4GHz Band, 125 kbps Data RateUnless otherwise indicated, typical conditions are: T = 25 °C, VDD = 3.3 V. DC-DC on. Crystal frequency=38.4 MHz. RF center fre-quency 2.45 GHz. Conducted measurement from the antenna feedpoint.Table 4.11. RF Receiver Characteristics for Bluetooth Low Energy in the 2.4GHz Band, 125 kbps Data RateParameter Symbol Test Condition Min Typ Max UnitSensitivity, 0.1% BER SENS Signal is reference signal1. UsingDC-DC converter.— -103.2 — dBmWith non-ideal signals as speci-fied in RF-PHY.TS.4.2.2, section4.6.1.— -102.8 — dBmNote:1. Reference signal is defined 2GFSK at -67 dBm, Modulation index = 0.5, BT = 0.5, Bit rate = 125 kbps, desired data = PRBS9;interferer data = PRBS15; frequency accuracy better than 1 ppm. 4.1.8.4 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4GHz Band, 500 kbps Data RateUnless otherwise indicated, typical conditions are: T = 25 °C, VDD = 3.3 V. DC-DC on. Crystal frequency=38.4 MHz. RF center fre-quency 2.45 GHz. Conducted measurement from the antenna feedpoint.Table 4.12. RF Receiver Characteristics for Bluetooth Low Energy in the 2.4GHz Band, 500 kbps Data RateParameter Symbol Test Condition Min Typ Max UnitSensitivity, 0.1% BER SENS Signal is reference signal1. UsingDC-DC converter.— -98.8 — dBmWith non-ideal signals as speci-fied in RF-PHY.TS.4.2.2, section4.6.1.— -97.6 — dBmNote:1. Reference signal is defined 2GFSK at -67 dBm, Modulation index = 0.5, BT = 0.5, Bit rate = 500 kbps, desired data = PRBS9;interferer data = PRBS15; frequency accuracy better than 1 ppm. 4.1.8.5 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4GHz Band, 1 Mbps Data RateUnless otherwise indicated, typical conditions are: T = 25 °C, VDD = 3.3 V. DC-DC on. Crystal frequency=38.4 MHz. RF center fre-quency 2.45 GHz. Conducted measurement from the antenna feedpoint.Table 4.13. RF Receiver Characteristics for Bluetooth Low Energy in the 2.4GHz Band, 1 Mbps Data RateParameter Symbol Test Condition Min Typ Max UnitSensitivity, 0.1% BER SENS Signal is reference signal1. UsingDC-DC converter.— -95 — dBmWith non-ideal signals as speci-fied in RF-PHY.TS.4.2.2, section4.6.1.— -94.8 — dBmNote:1. Reference signal is defined 2GFSK at -67 dBm, Modulation index = 0.5, BT = 0.5, Bit rate = 1 Mbps, desired data = PRBS9;interferer data = PRBS15; frequency accuracy better than 1 ppm. BGM13P Blue Gecko Bluetooth ® Module Data SheetElectrical Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 27
4.1.8.6 RF Receiver Characteristics for Bluetooth Low Energy in the 2.4GHz Band, 2 Mbps Data RateUnless otherwise indicated, typical conditions are: T = 25 °C, VDD = 3.3 V. DC-DC on. Crystal frequency=38.4 MHz. RF center fre-quency 2.45 GHz. Conducted measurement from the antenna feedpoint.Table 4.14. RF Receiver Characteristics for Bluetooth Low Energy in the 2.4GHz Band, 2 Mbps Data RateParameter Symbol Test Condition Min Typ Max UnitSensitivity, 0.1% BER SENS Signal is reference signal1. UsingDC-DC converter.— -91.2 — dBmWith non-ideal signals as speci-fied in RF-PHY.TS.4.2.2, section4.6.1.— -91.2 — dBmNote:1. Reference signal is defined 2GFSK at -67 dBm, Modulation index = 0.5, BT = 0.5, Bit rate = 2 Mbps, desired data = PRBS9;interferer data = PRBS15; frequency accuracy better than 1 ppm. BGM13P Blue Gecko Bluetooth ® Module Data SheetElectrical Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 28
4.1.9 Oscillators4.1.9.1 Low-Frequency Crystal Oscillator (LFXO)Table 4.15. Low-Frequency Crystal Oscillator (LFXO)Parameter Symbol Test Condition Min Typ Max UnitCrystal frequency fLFXO — 32.768 — kHzOverall frequency tolerancein all conditions1FTLFXO -100 — 100 ppmNote:1. Nominal crystal frequency tolerance of ± 20 ppm. 4.1.9.2 High-Frequency Crystal Oscillator (HFXO)Table 4.16. High-Frequency Crystal Oscillator (HFXO)Parameter Symbol Test Condition Min Typ Max UnitCrystal frequency fHFXO 38.4 MHz required for radio trans-ciever operation— 38.4 — MHzFrequency tolerance for thecrystalFTHFXO -40 — 40 ppm4.1.9.3 Low-Frequency RC Oscillator (LFRCO)Table 4.17. Low-Frequency RC Oscillator (LFRCO)Parameter Symbol Test Condition Min Typ Max UnitOscillation frequency fLFRCO ENVREF2 = 1 31.3 32.768 33.6 kHzENVREF2 = 0 31.3 32.768 33.4 kHzStartup time tLFRCO — 500 — µsCurrent consumption 1ILFRCO ENVREF = 1 inCMU_LFRCOCTRL— 342 — nAENVREF = 0 inCMU_LFRCOCTRL— 494 — nANote:1. Block is supplied by AVDD if ANASW = 0, or DVDD if ANASW=1 in EMU_PWRCTRL register.2. In CMU_LFRCOCTRL register. BGM13P Blue Gecko Bluetooth ® Module Data SheetElectrical Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 29
4.1.9.4 High-Frequency RC Oscillator (HFRCO)Table 4.18. High-Frequency RC Oscillator (HFRCO)Parameter Symbol Test Condition Min Typ Max UnitFrequency accuracy fHFRCO_ACC At production calibrated frequen-cies, across supply voltage andtemperature-2.5 — 2.5 %Start-up time tHFRCO fHFRCO ≥ 19 MHz — 300 — ns4 < fHFRCO < 19 MHz — 1 — µsfHFRCO ≤ 4 MHz — 2.5 — µsCurrent consumption on allsuppliesIHFRCO fHFRCO = 38 MHz — 267 299 µAfHFRCO = 32 MHz — 224 248 µAfHFRCO = 26 MHz — 189 211 µAfHFRCO = 19 MHz — 154 172 µAfHFRCO = 16 MHz — 133 148 µAfHFRCO = 13 MHz — 118 135 µAfHFRCO = 7 MHz — 89 100 µAfHFRCO = 4 MHz — 34 44 µAfHFRCO = 2 MHz — 29 40 µAfHFRCO = 1 MHz — 26 36 µACoarse trim step size (% ofperiod)SSHFRCO_COARSE— 0.8 — %Fine trim step size (% of pe-riod)SSHFRCO_FINE — 0.1 — %Period jitter PJHFRCO — 0.2 — % RMSFrequency limits fHFRCO_BAND FREQRANGE = 0, FINETUNIN-GEN = 03.47 — 6.15 MHzFREQRANGE = 3, FINETUNIN-GEN = 06.24 — 11.45 MHzFREQRANGE = 6, FINETUNIN-GEN = 011.3 — 19.8 MHzFREQRANGE = 7, FINETUNIN-GEN = 013.45 — 22.8 MHzFREQRANGE = 8, FINETUNIN-GEN = 016.5 — 29.0 MHzFREQRANGE = 10, FINETUNIN-GEN = 023.11 — 40.63 MHzFREQRANGE = 11, FINETUNIN-GEN = 027.27 — 48 MHzFREQRANGE = 12, FINETUNIN-GEN = 033.33 — 54 MHzBGM13P Blue Gecko Bluetooth ® Module Data SheetElectrical Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 30
4.1.9.5 Ultra-low Frequency RC Oscillator (ULFRCO)Table 4.19. Ultra-low Frequency RC Oscillator (ULFRCO)Parameter Symbol Test Condition Min Typ Max UnitOscillation frequency fULFRCO 0.95 1 1.07 kHz4.1.10 Flash Memory Characteristics5Table 4.20. Flash Memory Characteristics5Parameter Symbol Test Condition Min Typ Max UnitFlash erase cycles beforefailureECFLASH 10000 — — cyclesFlash data retention RETFLASH 10 — — yearsWord (32-bit) programmingtimetW_PROG Burst write, 128 words, averagetime per word20 26.3 30 µsSingle word 62 68.9 80 µsPage erase time4tPERASE 20 29.5 40 msMass erase time1tMERASE 20 30 40 msDevice erase time2 3tDERASE — 56.2 70 msErase current6IERASE Page Erase — — 2.0 mAWrite current6IWRITE — — 3.5 mASupply voltage during flasherase and writeVFLASH 1.62 — 3.6 VNote:1. Mass erase is issued by the CPU and erases all flash.2. Device erase is issued over the AAP interface and erases all flash, SRAM, the Lock Bit (LB) page, and the User data page LockWord (ULW).3. From setting the DEVICEERASE bit in AAP_CMD to 1 until the ERASEBUSY bit in AAP_STATUS is cleared to 0. Internal setupand hold times for flash control signals are included.4. From setting the ERASEPAGE bit in MSC_WRITECMD to 1 until the BUSY bit in MSC_STATUS is cleared to 0. Internal setupand hold times for flash control signals are included.5. Flash data retention information is published in the Quarterly Quality and Reliability Report.6. Measured at 25 °C. BGM13P Blue Gecko Bluetooth ® Module Data SheetElectrical Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 31
4.1.11 General-Purpose I/O (GPIO)Table 4.21. General-Purpose I/O (GPIO)Parameter Symbol Test Condition Min Typ Max UnitInput low voltage VIL GPIO pins — — IOVDD*0.3 VInput high voltage VIH GPIO pins IOVDD*0.7 — — VOutput high voltage relativeto IOVDDVOH Sourcing 3 mA, IOVDD ≥ 3 V,DRIVESTRENGTH1 = WEAKIOVDD*0.8 — — VSourcing 1.2 mA, IOVDD ≥ 1.62V,DRIVESTRENGTH1 = WEAKIOVDD*0.6 — — VSourcing 20 mA, IOVDD ≥ 3 V,DRIVESTRENGTH1 = STRONGIOVDD*0.8 — — VSourcing 8 mA, IOVDD ≥ 1.62 V,DRIVESTRENGTH1 = STRONGIOVDD*0.6 — — VOutput low voltage relative toIOVDDVOL Sinking 3 mA, IOVDD ≥ 3 V,DRIVESTRENGTH1 = WEAK— — IOVDD*0.2 VSinking 1.2 mA, IOVDD ≥ 1.62 V,DRIVESTRENGTH1 = WEAK— — IOVDD*0.4 VSinking 20 mA, IOVDD ≥ 3 V,DRIVESTRENGTH1 = STRONG— — IOVDD*0.2 VSinking 8 mA, IOVDD ≥ 1.62 V,DRIVESTRENGTH1 = STRONG— — IOVDD*0.4 VInput leakage current IIOLEAK All GPIO except LFXO pins, GPIO≤ IOVDD— 0.1 30 nALFXO Pins, GPIO ≤ IOVDD — 0.1 50 nAInput leakage current on5VTOL pads above IOVDDI5VTOLLEAK IOVDD < GPIO ≤ IOVDD + 2 V — 3.3 15 µAI/O pin pull-up/pull-down re-sistorRPUD 30 40 65 kΩPulse width of pulses re-moved by the glitch suppres-sion filtertIOGLITCH 15 25 45 nsBGM13P Blue Gecko Bluetooth ® Module Data SheetElectrical Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 32
Parameter Symbol Test Condition Min Typ Max UnitOutput fall time, From 70%to 30% of VIOtIOOF CL = 50 pF,DRIVESTRENGTH1 = STRONG,SLEWRATE1 = 0x6— 1.8 — nsCL = 50 pF,DRIVESTRENGTH1 = WEAK,SLEWRATE1 = 0x6— 4.5 — nsOutput rise time, From 30%to 70% of VIOtIOOR CL = 50 pF,DRIVESTRENGTH1 = STRONG,SLEWRATE = 0x61— 2.2 — nsCL = 50 pF,DRIVESTRENGTH1 = WEAK,SLEWRATE1 = 0x6— 7.4 — nsNote:1. In GPIO_Pn_CTRL register. BGM13P Blue Gecko Bluetooth ® Module Data SheetElectrical Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 33
4.1.12 Voltage Monitor (VMON)Table 4.22. Voltage Monitor (VMON)Parameter Symbol Test Condition Min Typ Max UnitSupply current (includingI_SENSE)IVMON In EM0 or EM1, 1 supply moni-tored— 6.3 8 µAIn EM0 or EM1, 4 supplies moni-tored— 12.5 15 µAIn EM2, EM3 or EM4, 1 supplymonitored and above threshold— 62 — nAIn EM2, EM3 or EM4, 1 supplymonitored and below threshold— 62 — nAIn EM2, EM3 or EM4, 4 suppliesmonitored and all above threshold— 99 — nAIn EM2, EM3 or EM4, 4 suppliesmonitored and all below threshold— 99 — nALoading of monitored supply ISENSE In EM0 or EM1 — 2 — µAIn EM2, EM3 or EM4 — 2 — nAThreshold range VVMON_RANGE 1.62 — 3.4 VThreshold step size NVMON_STESP Coarse — 200 — mVFine — 20 — mVResponse time tVMON_RES Supply drops at 1V/µs rate — 460 — nsHysteresis VVMON_HYST — 26 — mVBGM13P Blue Gecko Bluetooth ® Module Data SheetElectrical Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 34
4.1.13 Analog to Digital Converter (ADC)Specified at 1 Msps, ADCCLK = 16 MHz, BIASPROG = 0, GPBIASACC = 0, unless otherwise indicated.Table 4.23. Analog to Digital Converter (ADC)Parameter Symbol Test Condition Min Typ Max UnitResolution VRESOLUTION 6 — 12 BitsInput voltage range5VADCIN Single ended — — VFS VDifferential -VFS/2 — VFS/2 VInput range of external refer-ence voltage, single endedand differentialVADCREFIN_P 1 — VAVDD VPower supply rejection2PSRRADC At DC — 80 — dBAnalog input common moderejection ratioCMRRADC At DC — 80 — dBCurrent from all supplies, us-ing internal reference buffer.Continous operation. WAR-MUPMODE4 = KEEPADC-WARMIADC_CONTI-NOUS_LP1 Msps / 16 MHz ADCCLK, BIA-SPROG = 0, GPBIASACC = 1 3— 270 290 µA250 ksps / 4 MHz ADCCLK, BIA-SPROG = 6, GPBIASACC = 1 3— 125 — µA62.5 ksps / 1 MHz ADCCLK, BIA-SPROG = 15, GPBIASACC = 1 3— 80 — µACurrent from all supplies, us-ing internal reference buffer.Duty-cycled operation. WAR-MUPMODE4 = NORMALIADC_NORMAL_LP 35 ksps / 16 MHz ADCCLK, BIA-SPROG = 0, GPBIASACC = 1 3— 45 — µA5 ksps / 16 MHz ADCCLK BIA-SPROG = 0, GPBIASACC = 1 3— 8 — µACurrent from all supplies, us-ing internal reference buffer.Duty-cycled operation.AWARMUPMODE4 = KEEP-INSTANDBY or KEEPIN-SLOWACCIADC_STAND-BY_LP125 ksps / 16 MHz ADCCLK, BIA-SPROG = 0, GPBIASACC = 1 3— 105 — µA35 ksps / 16 MHz ADCCLK, BIA-SPROG = 0, GPBIASACC = 1 3— 70 — µACurrent from all supplies, us-ing internal reference buffer.Continous operation. WAR-MUPMODE4 = KEEPADC-WARMIADC_CONTI-NOUS_HP1 Msps / 16 MHz ADCCLK, BIA-SPROG = 0, GPBIASACC = 0 3— 325 — µA250 ksps / 4 MHz ADCCLK, BIA-SPROG = 6, GPBIASACC = 0 3— 175 — µA62.5 ksps / 1 MHz ADCCLK, BIA-SPROG = 15, GPBIASACC = 0 3— 125 — µACurrent from all supplies, us-ing internal reference buffer.Duty-cycled operation. WAR-MUPMODE4 = NORMALIADC_NORMAL_HP 35 ksps / 16 MHz ADCCLK, BIA-SPROG = 0, GPBIASACC = 0 3— 85 — µA5 ksps / 16 MHz ADCCLK BIA-SPROG = 0, GPBIASACC = 0 3— 16 — µACurrent from all supplies, us-ing internal reference buffer.Duty-cycled operation.AWARMUPMODE4 = KEEP-INSTANDBY or KEEPIN-SLOWACCIADC_STAND-BY_HP125 ksps / 16 MHz ADCCLK, BIA-SPROG = 0, GPBIASACC = 0 3— 160 — µA35 ksps / 16 MHz ADCCLK, BIA-SPROG = 0, GPBIASACC = 0 3— 125 — µACurrent from HFPERCLK IADC_CLK HFPERCLK = 16 MHz — 140 — µABGM13P Blue Gecko Bluetooth ® Module Data SheetElectrical Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 35
Parameter Symbol Test Condition Min Typ Max UnitADC clock frequency fADCCLK — — 16 MHzThroughput rate fADCRATE — — 1 MspsConversion time1tADCCONV 6 bit — 7 — cycles8 bit — 9 — cycles12 bit — 13 — cyclesStartup time of referencegenerator and ADC coretADCSTART WARMUPMODE4 = NORMAL — — 5 µsWARMUPMODE4 = KEEPIN-STANDBY— — 2 µsWARMUPMODE4 = KEEPINSLO-WACC— — 1 µsSNDR at 1Msps and fIN =10kHzSNDRADC Internal reference7, differentialmeasurement58 67 — dBExternal reference6, differentialmeasurement— 68 — dBSpurious-free dynamic range(SFDR)SFDRADC 1 MSamples/s, 10 kHz full-scalesine wave— 75 — dBDifferential non-linearity(DNL)DNLADC 12 bit resolution, No missing co-des-1 — 2 LSBIntegral non-linearity (INL),End point methodINLADC 12 bit resolution -6 — 6 LSBOffset error VADCOFFSETERR -3 0 3 LSBGain error in ADC VADCGAIN Using internal reference — -0.2 3.5 %Using external reference — -1 — %Temperature sensor slope VTS_SLOPE — -1.84 — mV/°CNote:1. Derived from ADCCLK.2. PSRR is referenced to AVDD when ANASW=0 and to DVDD when ANASW=1 in EMU_PWRCTRL.3. In ADCn_BIASPROG register.4. In ADCn_CNTL register.5. The absolute voltage allowed at any ADC input is dictated by the power rail supplied to on-chip circuitry, and may be lower thanthe effective full scale voltage. All ADC inputs are limited to the ADC supply (AVDD or DVDD depending onEMU_PWRCTRL_ANASW). Any ADC input routed through the APORT will further be limited by the IOVDD supply to the pin.6. External reference is 1.25 V applied externally to ADCnEXTREFP, with the selection CONF in the SINGLECTRL_REF orSCANCTRL_REF register field and VREFP in the SINGLECTRLX_VREFSEL or SCANCTRLX_VREFSEL field. The differentialinput range with this configuration is ± 1.25 V.7. Internal reference option used corresponds to selection 2V5 in the SINGLECTRL_REF or SCANCTRL_REF register field. Thedifferential input range with this configuration is ± 1.25 V. Typical value is characterized using full-scale sine wave input. Minimumvalue is production-tested using sine wave input at 1.5 dB lower than full scale. BGM13P Blue Gecko Bluetooth ® Module Data SheetElectrical Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 36
4.1.14 Current Digital to Analog Converter (IDAC)Table 4.24. Current Digital to Analog Converter (IDAC)Parameter Symbol Test Condition Min Typ Max UnitNumber of ranges NIDAC_RANGES — 4 — rangesOutput current IIDAC_OUT RANGSEL1 = RANGE0 0.05 — 1.6 µARANGSEL1 = RANGE1 1.6 — 4.7 µARANGSEL1 = RANGE2 0.5 — 16 µARANGSEL1 = RANGE3 2 — 64 µALinear steps within eachrangeNIDAC_STEPS — 32 — stepsStep size SSIDAC RANGSEL1 = RANGE0 — 50 — nARANGSEL1 = RANGE1 — 100 — nARANGSEL1 = RANGE2 — 500 — nARANGSEL1 = RANGE3 — 2 — µATotal accuracy, STEPSEL1 =0x10ACCIDAC EM0 or EM1, AVDD=3.3 V, T = 25°C-3 — 3 %EM0 or EM1, Across operatingtemperature range-18 — 22 %EM2 or EM3, Source mode,RANGSEL1 = RANGE0,AVDD=3.3 V, T = 25 °C— -2 — %EM2 or EM3, Source mode,RANGSEL1 = RANGE1,AVDD=3.3 V, T = 25 °C— -1.7 — %EM2 or EM3, Source mode,RANGSEL1 = RANGE2,AVDD=3.3 V, T = 25 °C— -0.8 — %EM2 or EM3, Source mode,RANGSEL1 = RANGE3,AVDD=3.3 V, T = 25 °C— -0.5 — %EM2 or EM3, Sink mode, RANG-SEL1 = RANGE0, AVDD=3.3 V, T= 25 °C— -0.7 — %EM2 or EM3, Sink mode, RANG-SEL1 = RANGE1, AVDD=3.3 V, T= 25 °C— -0.6 — %EM2 or EM3, Sink mode, RANG-SEL1 = RANGE2, AVDD=3.3 V, T= 25 °C— -0.5 — %EM2 or EM3, Sink mode, RANG-SEL1 = RANGE3, AVDD=3.3 V, T= 25 °C— -0.5 — %Start up time tIDAC_SU Output within 1% of steady statevalue— 5 — µsBGM13P Blue Gecko Bluetooth ® Module Data SheetElectrical Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 37
Parameter Symbol Test Condition Min Typ Max UnitSettling time, (output settledwithin 1% of steady state val-ue),tIDAC_SETTLE Range setting is changed — 5 — µsStep value is changed — 1 — µsCurrent consumption2IIDAC EM0 or EM1 Source mode, ex-cluding output current, Across op-erating temperature range— 11 15 µAEM0 or EM1 Sink mode, exclud-ing output current, Across operat-ing temperature range— 13 18 µAEM2 or EM3 Source mode, ex-cluding output current, T = 25 °C— 0.023 — µAEM2 or EM3 Sink mode, exclud-ing output current, T = 25 °C— 0.041 — µAEM2 or EM3 Source mode, ex-cluding output current, T ≥ 85 °C— 11 — µAEM2 or EM3 Sink mode, exclud-ing output current, T ≥ 85 °C— 13 — µAOutput voltage compliance insource mode, source currentchange relative to currentsourced at 0 VICOMP_SRC RANGESEL1=0, output voltage =min(VIOVDD, VAVDD2-100 mv)— 0.11 — %RANGESEL1=1, output voltage =min(VIOVDD, VAVDD2-100 mV)— 0.06 — %RANGESEL1=2, output voltage =min(VIOVDD, VAVDD2-150 mV)— 0.04 — %RANGESEL1=3, output voltage =min(VIOVDD, VAVDD2-250 mV)— 0.03 — %Output voltage compliance insink mode, sink currentchange relative to currentsunk at IOVDDICOMP_SINK RANGESEL1=0, output voltage =100 mV— 0.12 — %RANGESEL1=1, output voltage =100 mV— 0.05 — %RANGESEL1=2, output voltage =150 mV— 0.04 — %RANGESEL1=3, output voltage =250 mV— 0.03 — %Note:1. In IDAC_CURPROG register.2. The IDAC is supplied by either AVDD, DVDD, or IOVDD based on the setting of ANASW in the EMU_PWRCTRL register andPWRSEL in the IDAC_CTRL register. Setting PWRSEL to 1 selects IOVDD. With PWRSEL cleared to 0, ANASW selects be-tween AVDD (0) and DVDD (1). BGM13P Blue Gecko Bluetooth ® Module Data SheetElectrical Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 38
4.1.15 Analog Comparator (ACMP)Table 4.25. Analog Comparator (ACMP)Parameter Symbol Test Condition Min Typ Max UnitInput voltage range VACMPIN ACMPVDD =ACMPn_CTRL_PWRSEL 1— — VACMPVDD VSupply voltage VACMPVDD BIASPROG4 ≤ 0x10 or FULL-BIAS4 = 01.8 — VVREGVDD_MAXV0x10 < BIASPROG4 ≤ 0x20 andFULLBIAS4 = 12.1 — VVREGVDD_MAXVActive current not includingvoltage reference2IACMP BIASPROG4 = 1, FULLBIAS4 = 0 — 50 — nABIASPROG4 = 0x10, FULLBIAS4= 0— 306 — nABIASPROG4 = 0x02, FULLBIAS4= 1— 6.1 11 µABIASPROG4 = 0x20, FULLBIAS4= 1— 74 92 µACurrent consumption of inter-nal voltage reference2IACMPREF VLP selected as input using 2.5 VReference / 4 (0.625 V)— 50 — nAVLP selected as input using VDD — 20 — nAVBDIV selected as input using1.25 V reference / 1— 4.1 — µAVADIV selected as input usingVDD/1— 2.4 — µABGM13P Blue Gecko Bluetooth ® Module Data SheetElectrical Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 39
Parameter Symbol Test Condition Min Typ Max UnitHysteresis (VCM = 1.25 V,BIASPROG4 = 0x10, FULL-BIAS4 = 1)VACMPHYST HYSTSEL5 = HYST0 -3 0 3 mVHYSTSEL5 = HYST1 5 18 27 mVHYSTSEL5 = HYST2 12 33 50 mVHYSTSEL5 = HYST3 17 46 67 mVHYSTSEL5 = HYST4 23 57 86 mVHYSTSEL5 = HYST5 26 68 104 mVHYSTSEL5 = HYST6 30 79 130 mVHYSTSEL5 = HYST7 34 90 155 mVHYSTSEL5 = HYST8 -3 0 3 mVHYSTSEL5 = HYST9 -27 -18 -5 mVHYSTSEL5 = HYST10 -50 -33 -12 mVHYSTSEL5 = HYST11 -67 -45 -17 mVHYSTSEL5 = HYST12 -86 -57 -23 mVHYSTSEL5 = HYST13 -104 -67 -26 mVHYSTSEL5 = HYST14 -130 -78 -30 mVHYSTSEL5 = HYST15 -155 -88 -34 mVComparator delay3tACMPDELAY BIASPROG4 = 1, FULLBIAS4 = 0 — 30 95 µsBIASPROG4 = 0x10, FULLBIAS4= 0— 3.7 10 µsBIASPROG4 = 0x02, FULLBIAS4= 1— 360 1000 nsBIASPROG4 = 0x20, FULLBIAS4= 1— 35 — nsOffset voltage VACMPOFFSET BIASPROG4 =0x10, FULLBIAS4= 1-35 — 35 mVReference voltage VACMPREF Internal 1.25 V reference 1 1.25 1.47 VInternal 2.5 V reference 1.98 2.5 2.8 VCapacitive sense internal re-sistanceRCSRES CSRESSEL6 = 0 — infinite — kΩCSRESSEL6 = 1 — 15 — kΩCSRESSEL6 = 2 — 27 — kΩCSRESSEL6 = 3 — 39 — kΩCSRESSEL6 = 4 — 51 — kΩCSRESSEL6 = 5 — 102 — kΩCSRESSEL6 = 6 — 164 — kΩCSRESSEL6 = 7 — 239 — kΩBGM13P Blue Gecko Bluetooth ® Module Data SheetElectrical Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 40
Parameter Symbol Test Condition Min Typ Max UnitNote:1. ACMPVDD is a supply chosen by the setting in ACMPn_CTRL_PWRSEL and may be IOVDD, AVDD or DVDD.2. The total ACMP current is the sum of the contributions from the ACMP and its internal voltage reference. IACMPTOTAL = IACMP +IACMPREF.3. ± 100 mV differential drive.4. In ACMPn_CTRL register.5. In ACMPn_HYSTERESIS registers.6. In ACMPn_INPUTSEL register. 4.1.16 I2C4.1.16.1 I2C Standard-mode (Sm)1Table 4.26. I2C Standard-mode (Sm)1Parameter Symbol Test Condition Min Typ Max UnitSCL clock frequency2fSCL 0 — 100 kHzSCL clock low time tLOW 4.7 — — µsSCL clock high time tHIGH 4 — — µsSDA set-up time tSU_DAT 250 — — nsSDA hold time3tHD_DAT 100 — 3450 nsRepeated START conditionset-up timetSU_STA 4.7 — — µs(Repeated) START conditionhold timetHD_STA 4 — — µsSTOP condition set-up time tSU_STO 4 — — µsBus free time between aSTOP and START conditiontBUF 4.7 — — µsNote:1. For CLHR set to 0 in the I2Cn_CTRL register.2. For the minimum HFPERCLK frequency required in Standard-mode, refer to the I2C chapter in the reference manual.3. The maximum SDA hold time (tHD_DAT) needs to be met only when the device does not stretch the low time of SCL (tLOW). BGM13P Blue Gecko Bluetooth ® Module Data SheetElectrical Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 41
4.1.16.2 I2C Fast-mode (Fm)1Table 4.27. I2C Fast-mode (Fm)1Parameter Symbol Test Condition Min Typ Max UnitSCL clock frequency2fSCL 0 — 400 kHzSCL clock low time tLOW 1.3 — — µsSCL clock high time tHIGH 0.6 — — µsSDA set-up time tSU_DAT 100 — — nsSDA hold time3tHD_DAT 100 — 900 nsRepeated START conditionset-up timetSU_STA 0.6 — — µs(Repeated) START conditionhold timetHD_STA 0.6 — — µsSTOP condition set-up time tSU_STO 0.6 — — µsBus free time between aSTOP and START conditiontBUF 1.3 — — µsNote:1. For CLHR set to 1 in the I2Cn_CTRL register.2. For the minimum HFPERCLK frequency required in Fast-mode, refer to the I2C chapter in the reference manual.3. The maximum SDA hold time (tHD,DAT) needs to be met only when the device does not stretch the low time of SCL (tLOW). BGM13P Blue Gecko Bluetooth ® Module Data SheetElectrical Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 42
4.1.16.3 I2C Fast-mode Plus (Fm+)1Table 4.28. I2C Fast-mode Plus (Fm+)1Parameter Symbol Test Condition Min Typ Max UnitSCL clock frequency2fSCL 0 — 1000 kHzSCL clock low time tLOW 0.5 — — µsSCL clock high time tHIGH 0.26 — — µsSDA set-up time tSU_DAT 50 — — nsSDA hold time tHD_DAT 100 — — nsRepeated START conditionset-up timetSU_STA 0.26 — — µs(Repeated) START conditionhold timetHD_STA 0.26 — — µsSTOP condition set-up time tSU_STO 0.26 — — µsBus free time between aSTOP and START conditiontBUF 0.5 — — µsNote:1. For CLHR set to 0 or 1 in the I2Cn_CTRL register.2. For the minimum HFPERCLK frequency required in Fast-mode Plus, refer to the I2C chapter in the reference manual. BGM13P Blue Gecko Bluetooth ® Module Data SheetElectrical Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 43
4.1.17 USART SPISPI Master TimingTable 4.29. SPI Master TimingParameter Symbol Test Condition Min Typ Max UnitSCLK period 1 3 2tSCLK 2 *tHFPERCLK— — nsCS to MOSI 1 3tCS_MO -12.5 — 14 nsSCLK to MOSI 1 3tSCLK_MO -8.5 — 10.5 nsMISO setup time 1 3tSU_MI IOVDD = 1.62 V 90 — — nsIOVDD = 3.0 V 42 — — nsMISO hold time 1 3tH_MI -9 — — nsNote:1. Applies for both CLKPHA = 0 and CLKPHA = 1 (figure only shows CLKPHA = 0).2. tHFPERCLK is one period of the selected HFPERCLK.3. Measurement done with 8 pF output loading at 10% and 90% of VDD (figure shows 50% of VDD). CSSCLKCLKPOL = 0MOSIMISOtCS_MOtH_MItSU_MItSCKL_MOtSCLKSCLKCLKPOL = 1Figure 4.1. SPI Master Timing DiagramBGM13P Blue Gecko Bluetooth ® Module Data SheetElectrical Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 44
SPI Slave TimingTable 4.30. SPI Slave TimingParameter Symbol Test Condition Min Typ Max UnitSCLK period 1 3 2tSCLK 6 *tHFPERCLK— — nsSCLK high time1 3 2tSCLK_HI 2.5 *tHFPERCLK— — nsSCLK low time1 3 2tSCLK_LO 2.5 *tHFPERCLK— — nsCS active to MISO 1 3tCS_ACT_MI 4 — 70 nsCS disable to MISO 1 3tCS_DIS_MI 4 — 50 nsMOSI setup time 1 3tSU_MO 12.5 — — nsMOSI hold time 1 3 2tH_MO 13 — — nsSCLK to MISO 1 3 2tSCLK_MI 6 + 1.5 *tHFPERCLK— 45 + 2.5 *tHFPERCLKnsNote:1. Applies for both CLKPHA = 0 and CLKPHA = 1 (figure only shows CLKPHA = 0).2. tHFPERCLK is one period of the selected HFPERCLK.3. Measurement done with 8 pF output loading at 10% and 90% of VDD (figure shows 50% of VDD). CSSCLKCLKPOL = 0MOSIMISOtCS_ACT_MItSCLK_HItSCLKtSU_MOtH_MOtSCLK_MItCS_DIS_MItSCLK_LOSCLKCLKPOL = 1Figure 4.2. SPI Slave Timing DiagramBGM13P Blue Gecko Bluetooth ® Module Data SheetElectrical Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 45
5. Typical Connection Diagrams5.1 Network Co-Processor (NCP) Application with UART HostThe BGM13P can be controlled over the UART interface as a peripheral to an external host processor. Typical power supply, program-ming/debug, and host interface connections are shown in the figure below. Refer to AN958: Debugging and Programming Interfaces forCustom Designs for more details.Host CPUVDDPTI_FRAMETCK / SWCLKTMS / SWDIOTDO / SWOTDI+3.3 VWirelessModuleGNDPD13PD14PD15PA0PA1PA2PA3PA4PA5PB11GNDGNDRESETnVDDPF7PF6PF5PF4PF3PF2PF1PF0GNDPB13PC6PC7PC8PC9PC10PC11RXTXRTSCTSGPIORESETnVSS+3.3 VRESETnPTI_DATAPTI_FRAME (PB13)13579246810+3.3 VTDO / SWO (PF2)TCK / SWCLK (PF0)TMS / SWDIO (PF1)RESETnMini Simplicity Debug ConnectorPTI_DATA (PB11)(optional)Figure 5.1. Connection Diagram: UART NCP Configuration5.2 SoC ApplicationThe BGM13P can be used in a standalone SoC configuration with no external host processor. Typical power supply and programming/debug connections are shown in the figure below. Refer to AN958: Debugging and Programming Interfaces for Custom Designs formore details.Serial Flash(optional)VDDTCK / SWCLKTMS / SWDIOTDO / SWOTDI+3.3 VWirelessModuleGNDPD13PD14PD15PA0PA1PA2PA3PA4PA5PB11GNDGNDRESETnVDDPF7PF6PF5PF4PF3PF2PF1PF0GNDPB13PC6PC7PC8PC9PC10PC11MOSIMISOSCLKnCSVSS+3.3 VRESETnPTI_FRAME (PB13)13579246810+3.3 VTDO / SWO (PF2)TCK / SWCLK (PF0)TMS / SWDIO (PF1)RESETnMini Simplicity Debug ConnectorPTI_DATA (PB11)(optional)PTI_FRAMEPTI_DATAFigure 5.2. Connection Diagram: SoC ConfigurationBGM13P Blue Gecko Bluetooth ® Module Data SheetTypical Connection Diagramssilabs.com | Building a more connected world. Rev. 1.0 | 46
6. Layout GuidelinesFor optimal performance of the BGM13P (with integrated antenna), please follow the PCB layout guidelines and ground plane recom-mendations indicated in this section.6.1 Module Placement and Application PCB Layout Guidelines• Place the module at the edge of the PCB, as shown in Figure 6.1 Recommended Application PCB Layout for BGM13P with Integra-ted Antenna on page 47.• Do not place any metal (traces, components, battery, etc.) within the clearance area of the antenna.• Connect all ground pads directly to a solid ground plane.• Place the ground vias as close to the ground pads as possible.• Do not place plastic or any other dielectric material in contact with the antenna.Place vias close to each of the module’s GND padsPlace vias along all PCB edgesAlign module edge with PCB edgeWireless Module(Top View)GNDGNDGNDGNDAntenna ClearanceNo metal in this areaFigure 6.1. Recommended Application PCB Layout for BGM13P with Integrated AntennaBGM13P Blue Gecko Bluetooth ® Module Data SheetLayout Guidelinessilabs.com | Building a more connected world. Rev. 1.0 | 47
Figure 6.2 Non-optimal Module Placements for BGM13P with Integrated Antenna on page 48 shows examples of layouts that willresult in severely degraded RF performance.Figure 6.2. Non-optimal Module Placements for BGM13P with Integrated AntennaThe amount of ground plane surrounding the sides of the module will also impact the maximum RF range, as shown in Figure6.3 Impact of GND Plane Size vs. Range for BGM13P on page 48.Figure 6.3. Impact of GND Plane Size vs. Range for BGM13P6.2 Effect of Plastic and Metal MaterialsDo not place plastic or any other dielectric material in close proximity to the antenna.Any metallic objects in close proximity to the antenna will prevent the antenna from radiating freely. The minimum recommended dis-tance of metallic and/or conductive objects is 10 mm in any direction from the antenna except in the directions of the application PCBground planes.6.3 Locating the Module Close to Human BodyPlacing the module in contact with or very close to the human body will negatively impact antenna efficiency and reduce range.BGM13P Blue Gecko Bluetooth ® Module Data SheetLayout Guidelinessilabs.com | Building a more connected world. Rev. 1.0 | 48
6.4 2D Radiation Pattern PlotsFigure 6.4. Typical 2D Radiation Pattern – Front ViewFigure 6.5. Typical 2D Radiation Pattern – Side ViewBGM13P Blue Gecko Bluetooth ® Module Data SheetLayout Guidelinessilabs.com | Building a more connected world. Rev. 1.0 | 49
Figure 6.6. Typical 2D Radiation Pattern – Top ViewBGM13P Blue Gecko Bluetooth ® Module Data SheetLayout Guidelinessilabs.com | Building a more connected world. Rev. 1.0 | 50
7. Hardware Design GuidelinesThe BGM13P is an easy-to-use module with regard to hardware application design. The additional guidelines in this section should befollowed to guarantee optimal performance.7.1 Power Supply RequirementsCoin cell batteries cannot withstand high peak currents (e.g. higher than 15 mA). If the peak current exceeds 15 mA it is recommendedto place a 47 - 100 µF capacitor in parallel with the coin cell battery to improve battery life time. Note that the total current consumptionof the application is a combination of the radio, peripherals and MCU current consumption, and all power consumers must be taken intoaccount. BGM13P should be powered by a unipolar supply voltage with nominal value of 3.3 V.7.2 Reset FunctionsThe BGM13P can be reset by three different methods: by pulling the RESET line low, by the internal watchdog timer or by softwarecommand. The reset state in BGM13P does not provide any power saving functionality and is not recommended as a means to con-serve power. BGM13P has an internal system power-up reset function. The RESET pin includes an on-chip pull-up resistor and can beleft unconnected if no external reset switch or source is used.7.3 Debug and Firmware UpdatesThis section contains information on debugging and firmware update methods. For additional information, refer to the following applica-tion note: AN958: Debugging and Programming Interfaces for Custom Designs.7.3.1 Programming and Debug ConnectionsIt is recommended to expose the debug pins in your own hardware design for firmware update and debug purposes. The following tablelists the required pins for JTAG connection and SWD connections.Certain debug pins have internal pull-down or pull-ups enabled by default, and leaving them enabled may increase current consumptionif left connected to supply or ground. If the JTAG pins are enabled, the module must be power cycled to return to a SWD debug config-uration.Table 7.1. Debug PinsPin Name Pin Number JTAG Signal SWD Signal CommentsPF3 24 TDI N/A This pin is disabled after reset. Once enabled the pinhas a built-in pull-up.PF2 23 TDO N/A This pin is disabled after reset.PF1 22 TMS SWDIO Pin is enabled after reset and has a built-in pull-up.PF0 21 TCK SWCLK Pin is enabled after reset and has a built-in pull-down.7.3.2 Packet Trace Interface (PTI)The BGM13P integrates a true PHY-level packet trace interface (PTI) with the MAC, allowing complete, non-intrusive capture of allpackets to and from the EFR32 Wireless STK development tools. The PTI_DATA and PTI_FRAME signals are accessed via the PB11and PB12 pins, respectively.BGM13P Blue Gecko Bluetooth ® Module Data SheetHardware Design Guidelinessilabs.com | Building a more connected world. Rev. 1.0 | 51
8. Pin Definitions8.1 BGM13P Device PinoutFigure 8.1. BGM13P Device PinoutThe following table provides package pin connections and general descriptions of pin functionality. For detailed information on the sup-ported features for each GPIO pin, see 8.2 GPIO Functionality Table or 8.3 Alternate Functionality Overview.Table 8.1. BGM13P Device PinoutPin Name Pin(s) Description Pin Name Pin(s) DescriptionGND1122031Ground PD13 2 GPIOPD14 3 GPIO PD15 4 GPIOPA0 5 GPIO PA1 6 GPIOPA2 7 GPIO PA3 8 GPIOBGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 52
Pin Name Pin(s) Description Pin Name Pin(s) DescriptionPA4 9 GPIO PA5 10 GPIO (5V)PB11 11 GPIO PB13 13 GPIOPC6 14 GPIO (5V) PC7 15 GPIO (5V)PC8 16 GPIO (5V) PC9 17 GPIO (5V)PC10 18 GPIO (5V) PC11 19 GPIO (5V)PF0 21 GPIO (5V) PF1 22 GPIO (5V)PF2 23 GPIO (5V) PF3 24 GPIO (5V)PF4 25 GPIO (5V) PF5 26 GPIO (5V)PF6 27 GPIO (5V) PF7 28 GPIO (5V)VDD 29 Module Power Supply RESETn 30Reset input, active low. To apply an ex-ternal reset source to this pin, it is re-quired to only drive this pin low duringreset, and let the internal pull-up ensurethat reset is released.Note:1. GPIO with 5V tolerance are indicated by (5V). BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 53
8.2 GPIO Functionality TableA wide selection of alternate functionality is available for multiplexing to various pins. The following table shows the name of each GPIOpin, followed by the functionality available on that pin. Refer to 8.3 Alternate Functionality Overview for a list of GPIO locations availablefor each function.Table 8.2. GPIO Functionality TableGPIO Name Pin Alternate Functionality / DescriptionAnalog Timers Communication Radio OtherPD13VDAC0_OUT0ALT /OPA0_OUTALT #1BUSCY BUSDXOPA1_PTIM0_CC0 #21TIM0_CC1 #20TIM0_CC2 #19TIM0_CDTI0 #18TIM0_CDTI1 #17TIM0_CDTI2 #16TIM1_CC0 #21TIM1_CC1 #20TIM1_CC2 #19TIM1_CC3 #18WTIM0_CDTI0 #29WTIM0_CDTI1 #27WTIM0_CDTI2 #25LETIM0_OUT0 #21LETIM0_OUT1 #20PCNT0_S0IN #21PCNT0_S1IN #20US0_TX #21US0_RX #20US0_CLK #19US0_CS #18US0_CTS #17US0_RTS #16US1_TX #21US1_RX #20US1_CLK #19US1_CS #18US1_CTS #17US1_RTS #16LEU0_TX #21LEU0_RX #20I2C0_SDA #21I2C0_SCL #20FRC_DCLK #21FRC_DOUT #20FRC_DFRAME #19MODEM_DCLK #21MODEM_DIN #20MODEM_DOUT #19MODEM_ANT0 #18MODEM_ANT1 #17PRS_CH3 #12PRS_CH4 #4PRS_CH5 #3PRS_CH6 #15ACMP0_O #21ACMP1_O #21LES_CH5PD14BUSDY BUSCXVDAC0_OUT1 /OPA1_OUTTIM0_CC0 #22TIM0_CC1 #21TIM0_CC2 #20TIM0_CDTI0 #19TIM0_CDTI1 #18TIM0_CDTI2 #17TIM1_CC0 #22TIM1_CC1 #21TIM1_CC2 #20TIM1_CC3 #19WTIM0_CDTI0 #30WTIM0_CDTI1 #28WTIM0_CDTI2 #26LETIM0_OUT0 #22LETIM0_OUT1 #21PCNT0_S0IN #22PCNT0_S1IN #21US0_TX #22US0_RX #21US0_CLK #20US0_CS #19US0_CTS #18US0_RTS #17US1_TX #22US1_RX #21US1_CLK #20US1_CS #19US1_CTS #18US1_RTS #17LEU0_TX #22LEU0_RX #21I2C0_SDA #22I2C0_SCL #21FRC_DCLK #22FRC_DOUT #21FRC_DFRAME #20MODEM_DCLK #22MODEM_DIN #21MODEM_DOUT #20MODEM_ANT0 #19MODEM_ANT1 #18CMU_CLK0 #5PRS_CH3 #13PRS_CH4 #5PRS_CH5 #4PRS_CH6 #16ACMP0_O #22ACMP1_O #22LES_CH6GPIO_EM4WU4PD15VDAC0_OUT0ALT /OPA0_OUTALT #2BUSCY BUSDXOPA1_NTIM0_CC0 #23TIM0_CC1 #22TIM0_CC2 #21TIM0_CDTI0 #20TIM0_CDTI1 #19TIM0_CDTI2 #18TIM1_CC0 #23TIM1_CC1 #22TIM1_CC2 #21TIM1_CC3 #20WTIM0_CDTI0 #31WTIM0_CDTI1 #29WTIM0_CDTI2 #27LETIM0_OUT0 #23LETIM0_OUT1 #22PCNT0_S0IN #23PCNT0_S1IN #22US0_TX #23US0_RX #22US0_CLK #21US0_CS #20US0_CTS #19US0_RTS #18US1_TX #23US1_RX #22US1_CLK #21US1_CS #20US1_CTS #19US1_RTS #18LEU0_TX #23LEU0_RX #22I2C0_SDA #23I2C0_SCL #22FRC_DCLK #23FRC_DOUT #22FRC_DFRAME #21MODEM_DCLK #23MODEM_DIN #22MODEM_DOUT #21MODEM_ANT0 #20MODEM_ANT1 #19CMU_CLK1 #5PRS_CH3 #14PRS_CH4 #6PRS_CH5 #5PRS_CH6 #17ACMP0_O #23ACMP1_O #23LES_CH7DBG_SWO #2BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 54
GPIO Name Pin Alternate Functionality / DescriptionAnalog Timers Communication Radio OtherPA0 BUSDY BUSCXADC0_EXTNTIM0_CC0 #0TIM0_CC1 #31TIM0_CC2 #30TIM0_CDTI0 #29TIM0_CDTI1 #28TIM0_CDTI2 #27TIM1_CC0 #0TIM1_CC1 #31TIM1_CC2 #30TIM1_CC3 #29WTIM0_CC0 #0 LE-TIM0_OUT0 #0 LE-TIM0_OUT1 #31PCNT0_S0IN #0PCNT0_S1IN #31US0_TX #0 US0_RX#31 US0_CLK #30US0_CS #29US0_CTS #28US0_RTS #27US1_TX #0 US1_RX#31 US1_CLK #30US1_CS #29US1_CTS #28US1_RTS #27LEU0_TX #0LEU0_RX #31I2C0_SDA #0I2C0_SCL #31FRC_DCLK #0FRC_DOUT #31FRC_DFRAME #30MODEM_DCLK #0MODEM_DIN #31MODEM_DOUT #30MODEM_ANT0 #29MODEM_ANT1 #28CMU_CLK1 #0PRS_CH6 #0PRS_CH7 #10PRS_CH8 #9PRS_CH9 #8ACMP0_O #0ACMP1_O #0LES_CH8PA1BUSCY BUSDXADC0_EXTPVDAC0_EXTTIM0_CC0 #1TIM0_CC1 #0TIM0_CC2 #31TIM0_CDTI0 #30TIM0_CDTI1 #29TIM0_CDTI2 #28TIM1_CC0 #1TIM1_CC1 #0TIM1_CC2 #31TIM1_CC3 #30WTIM0_CC0 #1 LE-TIM0_OUT0 #1 LE-TIM0_OUT1 #0PCNT0_S0IN #1PCNT0_S1IN #0US0_TX #1 US0_RX#0 US0_CLK #31US0_CS #30US0_CTS #29US0_RTS #28US1_TX #1 US1_RX#0 US1_CLK #31US1_CS #30US1_CTS #29US1_RTS #28LEU0_TX #1LEU0_RX #0I2C0_SDA #1I2C0_SCL #0FRC_DCLK #1FRC_DOUT #0FRC_DFRAME #31MODEM_DCLK #1MODEM_DIN #0MODEM_DOUT #31MODEM_ANT0 #30MODEM_ANT1 #29CMU_CLK0 #0PRS_CH6 #1PRS_CH7 #0PRS_CH8 #10PRS_CH9 #9ACMP0_O #1ACMP1_O #1LES_CH9PA2VDAC0_OUT1ALT /OPA1_OUTALT #1BUSDY BUSCXOPA0_PTIM0_CC0 #2TIM0_CC1 #1TIM0_CC2 #0TIM0_CDTI0 #31TIM0_CDTI1 #30TIM0_CDTI2 #29TIM1_CC0 #2TIM1_CC1 #1TIM1_CC2 #0TIM1_CC3 #31WTIM0_CC0 #2WTIM0_CC1 #0 LE-TIM0_OUT0 #2 LE-TIM0_OUT1 #1PCNT0_S0IN #2PCNT0_S1IN #1US0_TX #2 US0_RX#1 US0_CLK #0US0_CS #31US0_CTS #30US0_RTS #29US1_TX #2 US1_RX#1 US1_CLK #0US1_CS #31US1_CTS #30US1_RTS #29LEU0_TX #2LEU0_RX #1I2C0_SDA #2I2C0_SCL #1FRC_DCLK #2FRC_DOUT #1FRC_DFRAME #0MODEM_DCLK #2MODEM_DIN #1MODEM_DOUT #0MODEM_ANT0 #31MODEM_ANT1 #30PRS_CH6 #2PRS_CH7 #1PRS_CH8 #0PRS_CH9 #10ACMP0_O #2ACMP1_O #2LES_CH10BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 55
GPIO Name Pin Alternate Functionality / DescriptionAnalog Timers Communication Radio OtherPA3BUSCY BUSDXVDAC0_OUT0 /OPA0_OUTTIM0_CC0 #3TIM0_CC1 #2TIM0_CC2 #1TIM0_CDTI0 #0TIM0_CDTI1 #31TIM0_CDTI2 #30TIM1_CC0 #3TIM1_CC1 #2TIM1_CC2 #1TIM1_CC3 #0WTIM0_CC0 #3WTIM0_CC1 #1 LE-TIM0_OUT0 #3 LE-TIM0_OUT1 #2PCNT0_S0IN #3PCNT0_S1IN #2US0_TX #3 US0_RX#2 US0_CLK #1US0_CS #0US0_CTS #31US0_RTS #30US1_TX #3 US1_RX#2 US1_CLK #1US1_CS #0US1_CTS #31US1_RTS #30LEU0_TX #3LEU0_RX #2I2C0_SDA #3I2C0_SCL #2FRC_DCLK #3FRC_DOUT #2FRC_DFRAME #1MODEM_DCLK #3MODEM_DIN #2MODEM_DOUT #1MODEM_ANT0 #0MODEM_ANT1 #31PRS_CH6 #3PRS_CH7 #2PRS_CH8 #1PRS_CH9 #0ACMP0_O #3ACMP1_O #3LES_CH11GPIO_EM4WU8PA4VDAC0_OUT1ALT /OPA1_OUTALT #2BUSDY BUSCXOPA0_NTIM0_CC0 #4TIM0_CC1 #3TIM0_CC2 #2TIM0_CDTI0 #1TIM0_CDTI1 #0TIM0_CDTI2 #31TIM1_CC0 #4TIM1_CC1 #3TIM1_CC2 #2TIM1_CC3 #1WTIM0_CC0 #4WTIM0_CC1 #2WTIM0_CC2 #0 LE-TIM0_OUT0 #4 LE-TIM0_OUT1 #3PCNT0_S0IN #4PCNT0_S1IN #3US0_TX #4 US0_RX#3 US0_CLK #2US0_CS #1US0_CTS #0US0_RTS #31US1_TX #4 US1_RX#3 US1_CLK #2US1_CS #1US1_CTS #0US1_RTS #31LEU0_TX #4LEU0_RX #3I2C0_SDA #4I2C0_SCL #3FRC_DCLK #4FRC_DOUT #3FRC_DFRAME #2MODEM_DCLK #4MODEM_DIN #3MODEM_DOUT #2MODEM_ANT0 #1MODEM_ANT1 #0PRS_CH6 #4PRS_CH7 #3PRS_CH8 #2PRS_CH9 #1ACMP0_O #4ACMP1_O #4LES_CH12PA5VDAC0_OUT0ALT /OPA0_OUTALT #0BUSCY BUSDXTIM0_CC0 #5TIM0_CC1 #4TIM0_CC2 #3TIM0_CDTI0 #2TIM0_CDTI1 #1TIM0_CDTI2 #0TIM1_CC0 #5TIM1_CC1 #4TIM1_CC2 #3TIM1_CC3 #2WTIM0_CC0 #5WTIM0_CC1 #3WTIM0_CC2 #1 LE-TIM0_OUT0 #5 LE-TIM0_OUT1 #4PCNT0_S0IN #5PCNT0_S1IN #4US0_TX #5 US0_RX#4 US0_CLK #3US0_CS #2US0_CTS #1US0_RTS #0US1_TX #5 US1_RX#4 US1_CLK #3US1_CS #2US1_CTS #1US1_RTS #0US2_TX #0 US2_RX#31 US2_CLK #30US2_CS #29US2_CTS #28US2_RTS #27LEU0_TX #5LEU0_RX #4I2C0_SDA #5I2C0_SCL #4FRC_DCLK #5FRC_DOUT #4FRC_DFRAME #3MODEM_DCLK #5MODEM_DIN #4MODEM_DOUT #3MODEM_ANT0 #2MODEM_ANT1 #1CMU_CLKI0 #4PRS_CH6 #5PRS_CH7 #4PRS_CH8 #3PRS_CH9 #2ACMP0_O #5ACMP1_O #5LES_CH13ETM_TCLK #1BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 56
GPIO Name Pin Alternate Functionality / DescriptionAnalog Timers Communication Radio OtherPB11 BUSCY BUSDXOPA2_PTIM0_CC0 #6TIM0_CC1 #5TIM0_CC2 #4TIM0_CDTI0 #3TIM0_CDTI1 #2TIM0_CDTI2 #1TIM1_CC0 #6TIM1_CC1 #5TIM1_CC2 #4TIM1_CC3 #3WTIM0_CC0 #15WTIM0_CC1 #13WTIM0_CC2 #11WTIM0_CDTI0 #7WTIM0_CDTI1 #5WTIM0_CDTI2 #3LETIM0_OUT0 #6LETIM0_OUT1 #5PCNT0_S0IN #6PCNT0_S1IN #5US0_TX #6 US0_RX#5 US0_CLK #4US0_CS #3US0_CTS #2US0_RTS #1US1_TX #6 US1_RX#5 US1_CLK #4US1_CS #3US1_CTS #2US1_RTS #1LEU0_TX #6LEU0_RX #5I2C0_SDA #6I2C0_SCL #5FRC_DCLK #6FRC_DOUT #5FRC_DFRAME #4MODEM_DCLK #6MODEM_DIN #5MODEM_DOUT #4MODEM_ANT0 #3MODEM_ANT1 #2PRS_CH6 #6PRS_CH7 #5PRS_CH8 #4PRS_CH9 #3ACMP0_O #6ACMP1_O #6PB13 BUSCY BUSDXOPA2_NTIM0_CC0 #8TIM0_CC1 #7TIM0_CC2 #6TIM0_CDTI0 #5TIM0_CDTI1 #4TIM0_CDTI2 #3TIM1_CC0 #8TIM1_CC1 #7TIM1_CC2 #6TIM1_CC3 #5WTIM0_CC0 #17WTIM0_CC1 #15WTIM0_CC2 #13WTIM0_CDTI0 #9WTIM0_CDTI1 #7WTIM0_CDTI2 #5LETIM0_OUT0 #8LETIM0_OUT1 #7PCNT0_S0IN #8PCNT0_S1IN #7US0_TX #8 US0_RX#7 US0_CLK #6US0_CS #5US0_CTS #4US0_RTS #3US1_TX #8 US1_RX#7 US1_CLK #6US1_CS #5US1_CTS #4US1_RTS #3LEU0_TX #8LEU0_RX #7I2C0_SDA #8I2C0_SCL #7FRC_DCLK #8FRC_DOUT #7FRC_DFRAME #6MODEM_DCLK #8MODEM_DIN #7MODEM_DOUT #6MODEM_ANT0 #5MODEM_ANT1 #4CMU_CLKI0 #0PRS_CH6 #8PRS_CH7 #7PRS_CH8 #6PRS_CH9 #5ACMP0_O #8ACMP1_O #8DBG_SWO #1GPIO_EM4WU9PC6 BUSBY BUSAXTIM0_CC0 #11TIM0_CC1 #10TIM0_CC2 #9TIM0_CDTI0 #8TIM0_CDTI1 #7TIM0_CDTI2 #6TIM1_CC0 #11TIM1_CC1 #10TIM1_CC2 #9TIM1_CC3 #8WTIM0_CC0 #26WTIM0_CC1 #24WTIM0_CC2 #22WTIM0_CDTI0 #18WTIM0_CDTI1 #16WTIM0_CDTI2 #14LETIM0_OUT0 #11LETIM0_OUT1 #10PCNT0_S0IN #11PCNT0_S1IN #10US0_TX #11US0_RX #10US0_CLK #9US0_CS #8US0_CTS #7US0_RTS #6US1_TX #11US1_RX #10US1_CLK #9US1_CS #8US1_CTS #7US1_RTS #6LEU0_TX #11LEU0_RX #10I2C0_SDA #11I2C0_SCL #10FRC_DCLK #11FRC_DOUT #10FRC_DFRAME #9MODEM_DCLK #11MODEM_DIN #10MODEM_DOUT #9MODEM_ANT0 #8MODEM_ANT1 #7CMU_CLK0 #2CMU_CLKI0 #2PRS_CH0 #8PRS_CH9 #11PRS_CH10 #0PRS_CH11 #5ACMP0_O #11ACMP1_O #11ETM_TCLK #3BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 57
GPIO Name Pin Alternate Functionality / DescriptionAnalog Timers Communication Radio OtherPC7 BUSAY BUSBXTIM0_CC0 #12TIM0_CC1 #11TIM0_CC2 #10TIM0_CDTI0 #9TIM0_CDTI1 #8TIM0_CDTI2 #7TIM1_CC0 #12TIM1_CC1 #11TIM1_CC2 #10TIM1_CC3 #9WTIM0_CC0 #27WTIM0_CC1 #25WTIM0_CC2 #23WTIM0_CDTI0 #19WTIM0_CDTI1 #17WTIM0_CDTI2 #15LETIM0_OUT0 #12LETIM0_OUT1 #11PCNT0_S0IN #12PCNT0_S1IN #11US0_TX #12US0_RX #11US0_CLK #10US0_CS #9US0_CTS #8US0_RTS #7US1_TX #12US1_RX #11US1_CLK #10US1_CS #9US1_CTS #8US1_RTS #7LEU0_TX #12LEU0_RX #11I2C0_SDA #12I2C0_SCL #11FRC_DCLK #12FRC_DOUT #11FRC_DFRAME #10MODEM_DCLK #12MODEM_DIN #11MODEM_DOUT #10MODEM_ANT0 #9MODEM_ANT1 #8CMU_CLK1 #2PRS_CH0 #9PRS_CH9 #12PRS_CH10 #1PRS_CH11 #0ACMP0_O #12ACMP1_O #12ETM_TD0PC8 BUSBY BUSAXTIM0_CC0 #13TIM0_CC1 #12TIM0_CC2 #11TIM0_CDTI0 #10TIM0_CDTI1 #9TIM0_CDTI2 #8TIM1_CC0 #13TIM1_CC1 #12TIM1_CC2 #11TIM1_CC3 #10WTIM0_CC0 #28WTIM0_CC1 #26WTIM0_CC2 #24WTIM0_CDTI0 #20WTIM0_CDTI1 #18WTIM0_CDTI2 #16LETIM0_OUT0 #13LETIM0_OUT1 #12PCNT0_S0IN #13PCNT0_S1IN #12US0_TX #13US0_RX #12US0_CLK #11US0_CS #10US0_CTS #9US0_RTS #8US1_TX #13US1_RX #12US1_CLK #11US1_CS #10US1_CTS #9US1_RTS #8LEU0_TX #13LEU0_RX #12I2C0_SDA #13I2C0_SCL #12FRC_DCLK #13FRC_DOUT #12FRC_DFRAME #11MODEM_DCLK #13MODEM_DIN #12MODEM_DOUT #11MODEM_ANT0 #10MODEM_ANT1 #9PRS_CH0 #10PRS_CH9 #13PRS_CH10 #2PRS_CH11 #1ACMP0_O #13ACMP1_O #13ETM_TD1PC9 BUSAY BUSBXTIM0_CC0 #14TIM0_CC1 #13TIM0_CC2 #12TIM0_CDTI0 #11TIM0_CDTI1 #10TIM0_CDTI2 #9TIM1_CC0 #14TIM1_CC1 #13TIM1_CC2 #12TIM1_CC3 #11WTIM0_CC0 #29WTIM0_CC1 #27WTIM0_CC2 #25WTIM0_CDTI0 #21WTIM0_CDTI1 #19WTIM0_CDTI2 #17LETIM0_OUT0 #14LETIM0_OUT1 #13PCNT0_S0IN #14PCNT0_S1IN #13US0_TX #14US0_RX #13US0_CLK #12US0_CS #11US0_CTS #10US0_RTS #9US1_TX #14US1_RX #13US1_CLK #12US1_CS #11US1_CTS #10US1_RTS #9LEU0_TX #14LEU0_RX #13I2C0_SDA #14I2C0_SCL #13FRC_DCLK #14FRC_DOUT #13FRC_DFRAME #12MODEM_DCLK #14MODEM_DIN #13MODEM_DOUT #12MODEM_ANT0 #11MODEM_ANT1 #10PRS_CH0 #11PRS_CH9 #14PRS_CH10 #3PRS_CH11 #2ACMP0_O #14ACMP1_O #14ETM_TD2BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 58
GPIO Name Pin Alternate Functionality / DescriptionAnalog Timers Communication Radio OtherPC10 BUSBY BUSAXTIM0_CC0 #15TIM0_CC1 #14TIM0_CC2 #13TIM0_CDTI0 #12TIM0_CDTI1 #11TIM0_CDTI2 #10TIM1_CC0 #15TIM1_CC1 #14TIM1_CC2 #13TIM1_CC3 #12WTIM0_CC0 #30WTIM0_CC1 #28WTIM0_CC2 #26WTIM0_CDTI0 #22WTIM0_CDTI1 #20WTIM0_CDTI2 #18LETIM0_OUT0 #15LETIM0_OUT1 #14PCNT0_S0IN #15PCNT0_S1IN #14US0_TX #15US0_RX #14US0_CLK #13US0_CS #12US0_CTS #11US0_RTS #10US1_TX #15US1_RX #14US1_CLK #13US1_CS #12US1_CTS #11US1_RTS #10LEU0_TX #15LEU0_RX #14I2C0_SDA #15I2C0_SCL #14I2C1_SDA #19I2C1_SCL #18FRC_DCLK #15FRC_DOUT #14FRC_DFRAME #13MODEM_DCLK #15MODEM_DIN #14MODEM_DOUT #13MODEM_ANT0 #12MODEM_ANT1 #11CMU_CLK1 #3PRS_CH0 #12PRS_CH9 #15PRS_CH10 #4PRS_CH11 #3ACMP0_O #15ACMP1_O #15ETM_TD3GPIO_EM4WU12PC11 BUSAY BUSBXTIM0_CC0 #16TIM0_CC1 #15TIM0_CC2 #14TIM0_CDTI0 #13TIM0_CDTI1 #12TIM0_CDTI2 #11TIM1_CC0 #16TIM1_CC1 #15TIM1_CC2 #14TIM1_CC3 #13WTIM0_CC0 #31WTIM0_CC1 #29WTIM0_CC2 #27WTIM0_CDTI0 #23WTIM0_CDTI1 #21WTIM0_CDTI2 #19LETIM0_OUT0 #16LETIM0_OUT1 #15PCNT0_S0IN #16PCNT0_S1IN #15US0_TX #16US0_RX #15US0_CLK #14US0_CS #13US0_CTS #12US0_RTS #11US1_TX #16US1_RX #15US1_CLK #14US1_CS #13US1_CTS #12US1_RTS #11LEU0_TX #16LEU0_RX #15I2C0_SDA #16I2C0_SCL #15I2C1_SDA #20I2C1_SCL #19FRC_DCLK #16FRC_DOUT #15FRC_DFRAME #14MODEM_DCLK #16MODEM_DIN #15MODEM_DOUT #14MODEM_ANT0 #13MODEM_ANT1 #12CMU_CLK0 #3PRS_CH0 #13PRS_CH9 #16PRS_CH10 #5PRS_CH11 #4ACMP0_O #16ACMP1_O #16DBG_SWO #3BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 59
GPIO Name Pin Alternate Functionality / DescriptionAnalog Timers Communication Radio OtherPF0 BUSBY BUSAXTIM0_CC0 #24TIM0_CC1 #23TIM0_CC2 #22TIM0_CDTI0 #21TIM0_CDTI1 #20TIM0_CDTI2 #19TIM1_CC0 #24TIM1_CC1 #23TIM1_CC2 #22TIM1_CC3 #21WTIM0_CDTI1 #30WTIM0_CDTI2 #28LETIM0_OUT0 #24LETIM0_OUT1 #23PCNT0_S0IN #24PCNT0_S1IN #23US0_TX #24US0_RX #23US0_CLK #22US0_CS #21US0_CTS #20US0_RTS #19US1_TX #24US1_RX #23US1_CLK #22US1_CS #21US1_CTS #20US1_RTS #19US2_TX #14US2_RX #13US2_CLK #12US2_CS #11US2_CTS #10US2_RTS #9LEU0_TX #24LEU0_RX #23I2C0_SDA #24I2C0_SCL #23FRC_DCLK #24FRC_DOUT #23FRC_DFRAME #22MODEM_DCLK #24MODEM_DIN #23MODEM_DOUT #22MODEM_ANT0 #21MODEM_ANT1 #20PRS_CH0 #0PRS_CH1 #7PRS_CH2 #6PRS_CH3 #5ACMP0_O #24ACMP1_O #24DBG_SWCLKTCKBOOT_TXPF1 BUSAY BUSBXTIM0_CC0 #25TIM0_CC1 #24TIM0_CC2 #23TIM0_CDTI0 #22TIM0_CDTI1 #21TIM0_CDTI2 #20TIM1_CC0 #25TIM1_CC1 #24TIM1_CC2 #23TIM1_CC3 #22WTIM0_CDTI1 #31WTIM0_CDTI2 #29LETIM0_OUT0 #25LETIM0_OUT1 #24PCNT0_S0IN #25PCNT0_S1IN #24US0_TX #25US0_RX #24US0_CLK #23US0_CS #22US0_CTS #21US0_RTS #20US1_TX #25US1_RX #24US1_CLK #23US1_CS #22US1_CTS #21US1_RTS #20US2_TX #15US2_RX #14US2_CLK #13US2_CS #12US2_CTS #11US2_RTS #10LEU0_TX #25LEU0_RX #24I2C0_SDA #25I2C0_SCL #24FRC_DCLK #25FRC_DOUT #24FRC_DFRAME #23MODEM_DCLK #25MODEM_DIN #24MODEM_DOUT #23MODEM_ANT0 #22MODEM_ANT1 #21PRS_CH0 #1PRS_CH1 #0PRS_CH2 #7PRS_CH3 #6ACMP0_O #25ACMP1_O #25DBG_SWDIOTMSBOOT_RXPF2 BUSBY BUSAXTIM0_CC0 #26TIM0_CC1 #25TIM0_CC2 #24TIM0_CDTI0 #23TIM0_CDTI1 #22TIM0_CDTI2 #21TIM1_CC0 #26TIM1_CC1 #25TIM1_CC2 #24TIM1_CC3 #23WTIM0_CDTI2 #30LETIM0_OUT0 #26LETIM0_OUT1 #25PCNT0_S0IN #26PCNT0_S1IN #25US0_TX #26US0_RX #25US0_CLK #24US0_CS #23US0_CTS #22US0_RTS #21US1_TX #26US1_RX #25US1_CLK #24US1_CS #23US1_CTS #22US1_RTS #21LEU0_TX #26LEU0_RX #25I2C0_SDA #26I2C0_SCL #25FRC_DCLK #26FRC_DOUT #25FRC_DFRAME #24MODEM_DCLK #26MODEM_DIN #25MODEM_DOUT #24MODEM_ANT0 #23MODEM_ANT1 #22CMU_CLK0 #6PRS_CH0 #2PRS_CH1 #1PRS_CH2 #0PRS_CH3 #7ACMP0_O #26ACMP1_O #26DBG_TDODBG_SWO #0GPIO_EM4WU0BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 60
GPIO Name Pin Alternate Functionality / DescriptionAnalog Timers Communication Radio OtherPF3 BUSAY BUSBXTIM0_CC0 #27TIM0_CC1 #26TIM0_CC2 #25TIM0_CDTI0 #24TIM0_CDTI1 #23TIM0_CDTI2 #22TIM1_CC0 #27TIM1_CC1 #26TIM1_CC2 #25TIM1_CC3 #24WTIM0_CDTI2 #31LETIM0_OUT0 #27LETIM0_OUT1 #26PCNT0_S0IN #27PCNT0_S1IN #26US0_TX #27US0_RX #26US0_CLK #25US0_CS #24US0_CTS #23US0_RTS #22US1_TX #27US1_RX #26US1_CLK #25US1_CS #24US1_CTS #23US1_RTS #22US2_TX #16US2_RX #15US2_CLK #14US2_CS #13US2_CTS #12US2_RTS #11LEU0_TX #27LEU0_RX #26I2C0_SDA #27I2C0_SCL #26FRC_DCLK #27FRC_DOUT #26FRC_DFRAME #25MODEM_DCLK #27MODEM_DIN #26MODEM_DOUT #25MODEM_ANT0 #24MODEM_ANT1 #23CMU_CLK1 #6PRS_CH0 #3PRS_CH1 #2PRS_CH2 #1PRS_CH3 #0ACMP0_O #27ACMP1_O #27DBG_TDIPF4 BUSBY BUSAXTIM0_CC0 #28TIM0_CC1 #27TIM0_CC2 #26TIM0_CDTI0 #25TIM0_CDTI1 #24TIM0_CDTI2 #23TIM1_CC0 #28TIM1_CC1 #27TIM1_CC2 #26TIM1_CC3 #25 LE-TIM0_OUT0 #28 LE-TIM0_OUT1 #27PCNT0_S0IN #28PCNT0_S1IN #27US0_TX #28US0_RX #27US0_CLK #26US0_CS #25US0_CTS #24US0_RTS #23US1_TX #28US1_RX #27US1_CLK #26US1_CS #25US1_CTS #24US1_RTS #23US2_TX #17US2_RX #16US2_CLK #15US2_CS #14US2_CTS #13US2_RTS #12LEU0_TX #28LEU0_RX #27I2C0_SDA #28I2C0_SCL #27FRC_DCLK #28FRC_DOUT #27FRC_DFRAME #26MODEM_DCLK #28MODEM_DIN #27MODEM_DOUT #26MODEM_ANT0 #25MODEM_ANT1 #24PRS_CH0 #4PRS_CH1 #3PRS_CH2 #2PRS_CH3 #1ACMP0_O #28ACMP1_O #28BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 61
GPIO Name Pin Alternate Functionality / DescriptionAnalog Timers Communication Radio OtherPF5 BUSAY BUSBXTIM0_CC0 #29TIM0_CC1 #28TIM0_CC2 #27TIM0_CDTI0 #26TIM0_CDTI1 #25TIM0_CDTI2 #24TIM1_CC0 #29TIM1_CC1 #28TIM1_CC2 #27TIM1_CC3 #26 LE-TIM0_OUT0 #29 LE-TIM0_OUT1 #28PCNT0_S0IN #29PCNT0_S1IN #28US0_TX #29US0_RX #28US0_CLK #27US0_CS #26US0_CTS #25US0_RTS #24US1_TX #29US1_RX #28US1_CLK #27US1_CS #26US1_CTS #25US1_RTS #24US2_TX #18US2_RX #17US2_CLK #16US2_CS #15US2_CTS #14US2_RTS #13LEU0_TX #29LEU0_RX #28I2C0_SDA #29I2C0_SCL #28FRC_DCLK #29FRC_DOUT #28FRC_DFRAME #27MODEM_DCLK #29MODEM_DIN #28MODEM_DOUT #27MODEM_ANT0 #26MODEM_ANT1 #25PRS_CH0 #5PRS_CH1 #4PRS_CH2 #3PRS_CH3 #2ACMP0_O #29ACMP1_O #29PF6 BUSBY BUSAXTIM0_CC0 #30TIM0_CC1 #29TIM0_CC2 #28TIM0_CDTI0 #27TIM0_CDTI1 #26TIM0_CDTI2 #25TIM1_CC0 #30TIM1_CC1 #29TIM1_CC2 #28TIM1_CC3 #27 LE-TIM0_OUT0 #30 LE-TIM0_OUT1 #29PCNT0_S0IN #30PCNT0_S1IN #29US0_TX #30US0_RX #29US0_CLK #28US0_CS #27US0_CTS #26US0_RTS #25US1_TX #30US1_RX #29US1_CLK #28US1_CS #27US1_CTS #26US1_RTS #25US2_TX #19US2_RX #18US2_CLK #17US2_CS #16US2_CTS #15US2_RTS #14LEU0_TX #30LEU0_RX #29I2C0_SDA #30I2C0_SCL #29FRC_DCLK #30FRC_DOUT #29FRC_DFRAME #28MODEM_DCLK #30MODEM_DIN #29MODEM_DOUT #28MODEM_ANT0 #27MODEM_ANT1 #26CMU_CLK1 #7PRS_CH0 #6PRS_CH1 #5PRS_CH2 #4PRS_CH3 #3ACMP0_O #30ACMP1_O #30BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 62
GPIO Name Pin Alternate Functionality / DescriptionAnalog Timers Communication Radio OtherPF7 BUSAY BUSBXTIM0_CC0 #31TIM0_CC1 #30TIM0_CC2 #29TIM0_CDTI0 #28TIM0_CDTI1 #27TIM0_CDTI2 #26TIM1_CC0 #31TIM1_CC1 #30TIM1_CC2 #29TIM1_CC3 #28 LE-TIM0_OUT0 #31 LE-TIM0_OUT1 #30PCNT0_S0IN #31PCNT0_S1IN #30US0_TX #31US0_RX #30US0_CLK #29US0_CS #28US0_CTS #27US0_RTS #26US1_TX #31US1_RX #30US1_CLK #29US1_CS #28US1_CTS #27US1_RTS #26US2_TX #20US2_RX #19US2_CLK #18US2_CS #17US2_CTS #16US2_RTS #15LEU0_TX #31LEU0_RX #30I2C0_SDA #31I2C0_SCL #30FRC_DCLK #31FRC_DOUT #30FRC_DFRAME #29MODEM_DCLK #31MODEM_DIN #30MODEM_DOUT #29MODEM_ANT0 #28MODEM_ANT1 #27CMU_CLKI0 #1CMU_CLK0 #7PRS_CH0 #7PRS_CH1 #6PRS_CH2 #5PRS_CH3 #4ACMP0_O #31ACMP1_O #31GPIO_EM4WU1BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 63
8.3 Alternate Functionality OverviewA wide selection of alternate functionality is available for multiplexing to various pins. The following table shows the name of the alter-nate functionality in the first column, followed by columns showing the possible LOCATION bitfield settings and the associated GPIOpin. Refer to 8.2 GPIO Functionality Table for a list of functions available on each GPIO pin.Note: Some functionality, such as analog interfaces, do not have alternate settings or a LOCATION bitfield. In these cases, the pinoutis shown in the column corresponding to LOCATION 0. Table 8.3. Alternate Functionality OverviewAlternate LOCATIONFunctionality 0 - 3 4 - 7 8 - 11 12 - 15 16 - 19 20 - 23 24 - 27 28 - 31 DescriptionACMP0_O0: PA01: PA12: PA23: PA34: PA45: PA56: PB118: PB1311: PC612: PC713: PC814: PC915: PC1016: PC1121: PD1322: PD1423: PD1524: PF025: PF126: PF227: PF328: PF429: PF530: PF631: PF7Analog comparatorACMP0, digital out-put.ACMP1_O0: PA01: PA12: PA23: PA34: PA45: PA56: PB118: PB1311: PC612: PC713: PC814: PC915: PC1016: PC1121: PD1322: PD1423: PD1524: PF025: PF126: PF227: PF328: PF429: PF530: PF631: PF7Analog comparatorACMP1, digital out-put.ADC0_EXTN0: PA0 Analog to digitalconverter ADC0 ex-ternal reference in-put negative pin.ADC0_EXTP0: PA1 Analog to digitalconverter ADC0 ex-ternal reference in-put positive pin.BOOT_RX0: PF1Bootloader RX.BOOT_TX0: PF0Bootloader TX.CMU_CLK00: PA12: PC63: PC115: PD146: PF27: PF7Clock ManagementUnit, clock outputnumber 0.CMU_CLK10: PA02: PC73: PC105: PD156: PF37: PF6Clock ManagementUnit, clock outputnumber 1.CMU_CLKI00: PB131: PF72: PC64: PA5 Clock ManagementUnit, clock inputnumber 0.BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 64
Alternate LOCATIONFunctionality 0 - 3 4 - 7 8 - 11 12 - 15 16 - 19 20 - 23 24 - 27 28 - 31 DescriptionDBG_SWCLKTCK0: PF0 Debug-interfaceSerial Wire clockinput and JTAGTest Clock.Note that this func-tion is enabled tothe pin out of reset,and has a built-inpull down.DBG_SWDIOTMS0: PF1 Debug-interfaceSerial Wire data in-put / output andJTAG Test ModeSelect.Note that this func-tion is enabled tothe pin out of reset,and has a built-inpull up.DBG_SWO0: PF21: PB132: PD153: PC11Debug-interfaceSerial Wire viewerOutput.Note that this func-tion is not enabledafter reset, andmust be enabled bysoftware to beused.DBG_TDI0: PF3 Debug-interfaceJTAG Test Data In.Note that this func-tion becomes avail-able after the firstvalid JTAG com-mand is received,and has a built-inpull up when JTAGis active.DBG_TDO0: PF2 Debug-interfaceJTAG Test DataOut.Note that this func-tion becomes avail-able after the firstvalid JTAG com-mand is received.ETM_TCLK 1: PA53: PC6Embedded TraceModule ETM clock .BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 65
Alternate LOCATIONFunctionality 0 - 3 4 - 7 8 - 11 12 - 15 16 - 19 20 - 23 24 - 27 28 - 31 DescriptionETM_TD03: PC7Embedded TraceModule ETM data0.ETM_TD13: PC8Embedded TraceModule ETM data1.ETM_TD23: PC9Embedded TraceModule ETM data2.ETM_TD33: PC10Embedded TraceModule ETM data3.FRC_DCLK0: PA01: PA12: PA23: PA34: PA45: PA56: PB118: PB1311: PC612: PC713: PC814: PC915: PC1016: PC1121: PD1322: PD1423: PD1524: PF025: PF126: PF227: PF328: PF429: PF530: PF631: PF7Frame Controller,Data Sniffer Clock.FRC_DFRAME0: PA21: PA32: PA43: PA54: PB116: PB139: PC610: PC711: PC812: PC913: PC1014: PC1119: PD1320: PD1421: PD1522: PF023: PF124: PF225: PF326: PF427: PF528: PF629: PF730: PA031: PA1Frame Controller,Data Sniffer FrameactiveFRC_DOUT0: PA11: PA22: PA33: PA44: PA55: PB117: PB1310: PC611: PC712: PC813: PC914: PC1015: PC1120: PD1321: PD1422: PD1523: PF024: PF125: PF226: PF327: PF428: PF529: PF630: PF731: PA0Frame Controller,Data Sniffer Out-put.GPIO_EM4WU00: PF2 Pin can be used towake the systemup from EM4GPIO_EM4WU10: PF7 Pin can be used towake the systemup from EM4GPIO_EM4WU40: PD14 Pin can be used towake the systemup from EM4GPIO_EM4WU80: PA3 Pin can be used towake the systemup from EM4GPIO_EM4WU90: PB13 Pin can be used towake the systemup from EM4GPIO_EM4WU120: PC10 Pin can be used towake the systemup from EM4BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 66
Alternate LOCATIONFunctionality 0 - 3 4 - 7 8 - 11 12 - 15 16 - 19 20 - 23 24 - 27 28 - 31 DescriptionI2C0_SCL0: PA11: PA22: PA33: PA44: PA55: PB117: PB1310: PC611: PC712: PC813: PC914: PC1015: PC1120: PD1321: PD1422: PD1523: PF024: PF125: PF226: PF327: PF428: PF529: PF630: PF731: PA0I2C0 Serial ClockLine input / output.I2C0_SDA0: PA01: PA12: PA23: PA34: PA45: PA56: PB118: PB1311: PC612: PC713: PC814: PC915: PC1016: PC1121: PD1322: PD1423: PD1524: PF025: PF126: PF227: PF328: PF429: PF530: PF631: PF7I2C0 Serial Data in-put / output.I2C1_SCL 18: PC1019: PC11I2C1 Serial ClockLine input / output.I2C1_SDA19: PC1020: PC11I2C1 Serial Data in-put / output.LES_CH50: PD13LESENSE channel5.LES_CH60: PD14LESENSE channel6.LES_CH70: PD15LESENSE channel7.LES_CH80: PA0LESENSE channel8.LES_CH90: PA1LESENSE channel9.LES_CH100: PA2LESENSE channel10.LES_CH110: PA3LESENSE channel11.LES_CH120: PA4LESENSE channel12.LES_CH130: PA5LESENSE channel13.BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 67
Alternate LOCATIONFunctionality 0 - 3 4 - 7 8 - 11 12 - 15 16 - 19 20 - 23 24 - 27 28 - 31 DescriptionLETIM0_OUT00: PA01: PA12: PA23: PA34: PA45: PA56: PB118: PB1311: PC612: PC713: PC814: PC915: PC1016: PC1121: PD1322: PD1423: PD1524: PF025: PF126: PF227: PF328: PF429: PF530: PF631: PF7Low Energy TimerLETIM0, outputchannel 0.LETIM0_OUT10: PA11: PA22: PA33: PA44: PA55: PB117: PB1310: PC611: PC712: PC813: PC914: PC1015: PC1120: PD1321: PD1422: PD1523: PF024: PF125: PF226: PF327: PF428: PF529: PF630: PF731: PA0Low Energy TimerLETIM0, outputchannel 1.LEU0_RX0: PA11: PA22: PA33: PA44: PA55: PB117: PB1310: PC611: PC712: PC813: PC914: PC1015: PC1120: PD1321: PD1422: PD1523: PF024: PF125: PF226: PF327: PF428: PF529: PF630: PF731: PA0LEUART0 Receiveinput.LEU0_TX0: PA01: PA12: PA23: PA34: PA45: PA56: PB118: PB1311: PC612: PC713: PC814: PC915: PC1016: PC1121: PD1322: PD1423: PD1524: PF025: PF126: PF227: PF328: PF429: PF530: PF631: PF7LEUART0 Transmitoutput. Also usedas receive input inhalf duplex commu-nication.MODEM_ANT00: PA31: PA42: PA53: PB115: PB138: PC69: PC710: PC811: PC912: PC1013: PC1118: PD1319: PD1420: PD1521: PF022: PF123: PF224: PF325: PF426: PF527: PF628: PF729: PA030: PA131: PA2MODEM antennacontrol output 0,used for antennadiversity.MODEM_ANT10: PA41: PA52: PB114: PB137: PC68: PC79: PC810: PC911: PC1012: PC1117: PD1318: PD1419: PD1520: PF021: PF122: PF223: PF324: PF425: PF526: PF627: PF728: PA029: PA130: PA231: PA3MODEM antennacontrol output 1,used for antennadiversity.MODEM_DCLK0: PA01: PA12: PA23: PA34: PA45: PA56: PB118: PB1311: PC612: PC713: PC814: PC915: PC1016: PC1121: PD1322: PD1423: PD1524: PF025: PF126: PF227: PF328: PF429: PF530: PF631: PF7MODEM data clockout.MODEM_DIN0: PA11: PA22: PA33: PA44: PA55: PB117: PB1310: PC611: PC712: PC813: PC914: PC1015: PC1120: PD1321: PD1422: PD1523: PF024: PF125: PF226: PF327: PF428: PF529: PF630: PF731: PA0MODEM data in.MODEM_DOUT0: PA21: PA32: PA43: PA54: PB116: PB139: PC610: PC711: PC812: PC913: PC1014: PC1119: PD1320: PD1421: PD1522: PF023: PF124: PF225: PF326: PF427: PF528: PF629: PF730: PA031: PA1MODEM data out.OPA0_N0: PA4 Operational Amplifi-er 0 external nega-tive input.OPA0_P0: PA2 Operational Amplifi-er 0 external posi-tive input.OPA1_N0: PD15 Operational Amplifi-er 1 external nega-tive input.OPA1_P0: PD13 Operational Amplifi-er 1 external posi-tive input.BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 68
Alternate LOCATIONFunctionality 0 - 3 4 - 7 8 - 11 12 - 15 16 - 19 20 - 23 24 - 27 28 - 31 DescriptionOPA2_N0: PB13 Operational Amplifi-er 2 external nega-tive input.OPA2_P0: PB11 Operational Amplifi-er 2 external posi-tive input.PCNT0_S0IN0: PA01: PA12: PA23: PA34: PA45: PA56: PB118: PB1311: PC612: PC713: PC814: PC915: PC1016: PC1121: PD1322: PD1423: PD1524: PF025: PF126: PF227: PF328: PF429: PF530: PF631: PF7Pulse CounterPCNT0 input num-ber 0.PCNT0_S1IN0: PA11: PA22: PA33: PA44: PA55: PB117: PB1310: PC611: PC712: PC813: PC914: PC1015: PC1120: PD1321: PD1422: PD1523: PF024: PF125: PF226: PF327: PF428: PF529: PF630: PF731: PA0Pulse CounterPCNT0 input num-ber 1.PRS_CH00: PF01: PF12: PF23: PF34: PF45: PF56: PF67: PF78: PC69: PC710: PC811: PC912: PC1013: PC11 Peripheral ReflexSystem PRS, chan-nel 0.PRS_CH10: PF11: PF22: PF33: PF44: PF55: PF66: PF77: PF0Peripheral ReflexSystem PRS, chan-nel 1.PRS_CH20: PF21: PF32: PF43: PF54: PF65: PF76: PF07: PF1Peripheral ReflexSystem PRS, chan-nel 2.PRS_CH30: PF31: PF42: PF53: PF64: PF75: PF06: PF17: PF212: PD1313: PD1414: PD15Peripheral ReflexSystem PRS, chan-nel 3.PRS_CH44: PD135: PD146: PD15Peripheral ReflexSystem PRS, chan-nel 4.PRS_CH53: PD134: PD145: PD15 Peripheral ReflexSystem PRS, chan-nel 5.PRS_CH60: PA01: PA12: PA23: PA34: PA45: PA56: PB118: PB1315: PD1316: PD1417: PD15 Peripheral ReflexSystem PRS, chan-nel 6.PRS_CH70: PA11: PA22: PA33: PA44: PA55: PB117: PB1310: PA0Peripheral ReflexSystem PRS, chan-nel 7.PRS_CH80: PA21: PA32: PA43: PA54: PB116: PB139: PA010: PA1Peripheral ReflexSystem PRS, chan-nel 8.BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 69
Alternate LOCATIONFunctionality 0 - 3 4 - 7 8 - 11 12 - 15 16 - 19 20 - 23 24 - 27 28 - 31 DescriptionPRS_CH90: PA31: PA42: PA53: PB115: PB138: PA09: PA110: PA211: PC612: PC713: PC814: PC915: PC1016: PC11 Peripheral ReflexSystem PRS, chan-nel 9.PRS_CH100: PC61: PC72: PC83: PC94: PC105: PC11 Peripheral ReflexSystem PRS, chan-nel 10.PRS_CH110: PC71: PC82: PC93: PC104: PC115: PC6 Peripheral ReflexSystem PRS, chan-nel 11.TIM0_CC00: PA01: PA12: PA23: PA34: PA45: PA56: PB118: PB1311: PC612: PC713: PC814: PC915: PC1016: PC1121: PD1322: PD1423: PD1524: PF025: PF126: PF227: PF328: PF429: PF530: PF631: PF7Timer 0 CaptureCompare input /output channel 0.TIM0_CC10: PA11: PA22: PA33: PA44: PA55: PB117: PB1310: PC611: PC712: PC813: PC914: PC1015: PC1120: PD1321: PD1422: PD1523: PF024: PF125: PF226: PF327: PF428: PF529: PF630: PF731: PA0Timer 0 CaptureCompare input /output channel 1.TIM0_CC20: PA21: PA32: PA43: PA54: PB116: PB139: PC610: PC711: PC812: PC913: PC1014: PC1119: PD1320: PD1421: PD1522: PF023: PF124: PF225: PF326: PF427: PF528: PF629: PF730: PA031: PA1Timer 0 CaptureCompare input /output channel 2.TIM0_CDTI00: PA31: PA42: PA53: PB115: PB138: PC69: PC710: PC811: PC912: PC1013: PC1118: PD1319: PD1420: PD1521: PF022: PF123: PF224: PF325: PF426: PF527: PF628: PF729: PA030: PA131: PA2Timer 0 Compli-mentary Dead TimeInsertion channel 0.TIM0_CDTI10: PA41: PA52: PB114: PB137: PC68: PC79: PC810: PC911: PC1012: PC1117: PD1318: PD1419: PD1520: PF021: PF122: PF223: PF324: PF425: PF526: PF627: PF728: PA029: PA130: PA231: PA3Timer 0 Compli-mentary Dead TimeInsertion channel 1.TIM0_CDTI20: PA51: PB113: PB136: PC67: PC78: PC89: PC910: PC1011: PC1116: PD1317: PD1418: PD1519: PF020: PF121: PF222: PF323: PF424: PF525: PF626: PF727: PA028: PA129: PA230: PA331: PA4Timer 0 Compli-mentary Dead TimeInsertion channel 2.TIM1_CC00: PA01: PA12: PA23: PA34: PA45: PA56: PB118: PB1311: PC612: PC713: PC814: PC915: PC1016: PC1121: PD1322: PD1423: PD1524: PF025: PF126: PF227: PF328: PF429: PF530: PF631: PF7Timer 1 CaptureCompare input /output channel 0.TIM1_CC10: PA11: PA22: PA33: PA44: PA55: PB117: PB1310: PC611: PC712: PC813: PC914: PC1015: PC1120: PD1321: PD1422: PD1523: PF024: PF125: PF226: PF327: PF428: PF529: PF630: PF731: PA0Timer 1 CaptureCompare input /output channel 1.TIM1_CC20: PA21: PA32: PA43: PA54: PB116: PB139: PC610: PC711: PC812: PC913: PC1014: PC1119: PD1320: PD1421: PD1522: PF023: PF124: PF225: PF326: PF427: PF528: PF629: PF730: PA031: PA1Timer 1 CaptureCompare input /output channel 2.TIM1_CC30: PA31: PA42: PA53: PB115: PB138: PC69: PC710: PC811: PC912: PC1013: PC1118: PD1319: PD1420: PD1521: PF022: PF123: PF224: PF325: PF426: PF527: PF628: PF729: PA030: PA131: PA2Timer 1 CaptureCompare input /output channel 3.BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 70
Alternate LOCATIONFunctionality 0 - 3 4 - 7 8 - 11 12 - 15 16 - 19 20 - 23 24 - 27 28 - 31 DescriptionUS0_CLK0: PA21: PA32: PA43: PA54: PB116: PB139: PC610: PC711: PC812: PC913: PC1014: PC1119: PD1320: PD1421: PD1522: PF023: PF124: PF225: PF326: PF427: PF528: PF629: PF730: PA031: PA1USART0 clock in-put / output.US0_CS0: PA31: PA42: PA53: PB115: PB138: PC69: PC710: PC811: PC912: PC1013: PC1118: PD1319: PD1420: PD1521: PF022: PF123: PF224: PF325: PF426: PF527: PF628: PF729: PA030: PA131: PA2USART0 chip se-lect input / output.US0_CTS0: PA41: PA52: PB114: PB137: PC68: PC79: PC810: PC911: PC1012: PC1117: PD1318: PD1419: PD1520: PF021: PF122: PF223: PF324: PF425: PF526: PF627: PF728: PA029: PA130: PA231: PA3USART0 Clear ToSend hardwareflow control input.US0_RTS0: PA51: PB113: PB136: PC67: PC78: PC89: PC910: PC1011: PC1116: PD1317: PD1418: PD1519: PF020: PF121: PF222: PF323: PF424: PF525: PF626: PF727: PA028: PA129: PA230: PA331: PA4USART0 RequestTo Send hardwareflow control output.US0_RX0: PA11: PA22: PA33: PA44: PA55: PB117: PB1310: PC611: PC712: PC813: PC914: PC1015: PC1120: PD1321: PD1422: PD1523: PF024: PF125: PF226: PF327: PF428: PF529: PF630: PF731: PA0USART0 Asynchro-nous Receive.USART0 Synchro-nous mode MasterInput / Slave Out-put (MISO).US0_TX0: PA01: PA12: PA23: PA34: PA45: PA56: PB118: PB1311: PC612: PC713: PC814: PC915: PC1016: PC1121: PD1322: PD1423: PD1524: PF025: PF126: PF227: PF328: PF429: PF530: PF631: PF7USART0 Asynchro-nous Transmit. Al-so used as receiveinput in half duplexcommunication.USART0 Synchro-nous mode MasterOutput / Slave In-put (MOSI).US1_CLK0: PA21: PA32: PA43: PA54: PB116: PB139: PC610: PC711: PC812: PC913: PC1014: PC1119: PD1320: PD1421: PD1522: PF023: PF124: PF225: PF326: PF427: PF528: PF629: PF730: PA031: PA1USART1 clock in-put / output.US1_CS0: PA31: PA42: PA53: PB115: PB138: PC69: PC710: PC811: PC912: PC1013: PC1118: PD1319: PD1420: PD1521: PF022: PF123: PF224: PF325: PF426: PF527: PF628: PF729: PA030: PA131: PA2USART1 chip se-lect input / output.US1_CTS0: PA41: PA52: PB114: PB137: PC68: PC79: PC810: PC911: PC1012: PC1117: PD1318: PD1419: PD1520: PF021: PF122: PF223: PF324: PF425: PF526: PF627: PF728: PA029: PA130: PA231: PA3USART1 Clear ToSend hardwareflow control input.US1_RTS0: PA51: PB113: PB136: PC67: PC78: PC89: PC910: PC1011: PC1116: PD1317: PD1418: PD1519: PF020: PF121: PF222: PF323: PF424: PF525: PF626: PF727: PA028: PA129: PA230: PA331: PA4USART1 RequestTo Send hardwareflow control output.BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 71
Alternate LOCATIONFunctionality 0 - 3 4 - 7 8 - 11 12 - 15 16 - 19 20 - 23 24 - 27 28 - 31 DescriptionUS1_RX0: PA11: PA22: PA33: PA44: PA55: PB117: PB1310: PC611: PC712: PC813: PC914: PC1015: PC1120: PD1321: PD1422: PD1523: PF024: PF125: PF226: PF327: PF428: PF529: PF630: PF731: PA0USART1 Asynchro-nous Receive.USART1 Synchro-nous mode MasterInput / Slave Out-put (MISO).US1_TX0: PA01: PA12: PA23: PA34: PA45: PA56: PB118: PB1311: PC612: PC713: PC814: PC915: PC1016: PC1121: PD1322: PD1423: PD1524: PF025: PF126: PF227: PF328: PF429: PF530: PF631: PF7USART1 Asynchro-nous Transmit. Al-so used as receiveinput in half duplexcommunication.USART1 Synchro-nous mode MasterOutput / Slave In-put (MOSI).US2_CLK12: PF013: PF114: PF315: PF416: PF517: PF618: PF7 30: PA5USART2 clock in-put / output.US2_CS11: PF012: PF113: PF314: PF415: PF516: PF617: PF7 29: PA5 USART2 chip se-lect input / output.US2_CTS 10: PF011: PF112: PF313: PF414: PF515: PF616: PF7 28: PA5 USART2 Clear ToSend hardwareflow control input.US2_RTS 9: PF010: PF111: PF312: PF413: PF514: PF615: PF7 27: PA5USART2 RequestTo Send hardwareflow control output.US2_RX13: PF014: PF115: PF316: PF417: PF518: PF619: PF7 31: PA5USART2 Asynchro-nous Receive.USART2 Synchro-nous mode MasterInput / Slave Out-put (MISO).US2_TX0: PA514: PF015: PF116: PF317: PF418: PF519: PF620: PF7 USART2 Asynchro-nous Transmit. Al-so used as receiveinput in half duplexcommunication.USART2 Synchro-nous mode MasterOutput / Slave In-put (MOSI).VDAC0_EXT0: PA1 Digital to analogconverter VDAC0external referenceinput pin.BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 72
Alternate LOCATIONFunctionality 0 - 3 4 - 7 8 - 11 12 - 15 16 - 19 20 - 23 24 - 27 28 - 31 DescriptionVDAC0_OUT0 /OPA0_OUT0: PA3 Digital to AnalogConverter DAC0output channelnumber 0.VDAC0_OUT0ALT / OPA0_OUT-ALT0: PA51: PD132: PD15Digital to AnalogConverter DAC0 al-ternative output forchannel 0.VDAC0_OUT1 /OPA1_OUT0: PD14 Digital to AnalogConverter DAC0output channelnumber 1.VDAC0_OUT1ALT / OPA1_OUT-ALT1: PA22: PA4Digital to AnalogConverter DAC0 al-ternative output forchannel 1.WTIM0_CC00: PA01: PA12: PA23: PA34: PA45: PA515: PB1117: PB1326: PC627: PC728: PC829: PC930: PC1031: PC11Wide timer 0 Cap-ture Compare in-put / output channel0.WTIM0_CC10: PA21: PA32: PA43: PA513: PB1115: PB1324: PC625: PC726: PC827: PC928: PC1029: PC11Wide timer 0 Cap-ture Compare in-put / output channel1.WTIM0_CC20: PA41: PA511: PB1113: PB1322: PC623: PC724: PC825: PC926: PC1027: PC11Wide timer 0 Cap-ture Compare in-put / output channel2.WTIM0_CDTI07: PB119: PB1318: PC619: PC720: PC821: PC922: PC1023: PC1129: PD1330: PD1431: PD15Wide timer 0 Com-plimentary DeadTime Insertionchannel 0.WTIM0_CDTI1 5: PB117: PB1316: PC617: PC718: PC819: PC920: PC1021: PC1127: PD1328: PD1429: PD1530: PF031: PF1Wide timer 0 Com-plimentary DeadTime Insertionchannel 1.WTIM0_CDTI23: PB115: PB1314: PC615: PC716: PC817: PC918: PC1019: PC1125: PD1326: PD1427: PD1528: PF029: PF130: PF231: PF3Wide timer 0 Com-plimentary DeadTime Insertionchannel 2.BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 73
8.4 Analog Port (APORT) Client MapsThe Analog Port (APORT) is an infrastructure used to connect chip pins with on-chip analog clients such as analog comparators, ADCs,DACs, etc. The APORT consists of a set of shared buses, switches, and control logic needed to configurably implement the signal rout-ing. Figure 8.2 APORT Connection Diagram on page 74 shows the APORT routing for this device family (note that available featuresmay vary by part number). A complete description of APORT functionality can be found in the Reference Manual.PF0PF1PF2PF3PF4PF5PF6PF7PC6PC7PC8PC9PC10PC11PD9PD10PD14PD13PD12PD11PD15PA0PA4PA3PA2PA1PA5PB14PB13PB12PB11PB15AXAYBXBYCXCYDXDYIDAC0 1X1YPOSNEGACMP01Y2Y3Y4YPOSNEGACMP1ADC0EXTPEXTNPOSNEGOPA01X2X3X4X1Y2Y3Y4Y1XOPA0_POPA0_NOUT0OUT0ALTOUT1OUT2OUT3OUT4OUTPOSNEGOPA1OUT1X2X3X4X1Y2Y3Y4Y1XOPA1_POPA1_NOUT1OUT1ALTOUT1OUT2OUT3OUT4ADC_EXTPADC_EXTNOUT0OUT1OPA0_NOPA0_POPA1_NOPA1_PVDAC0_OUT0ALTOUT0ALTVDAC0_OUT0ALTOUT0ALTVDAC0_OUT0ALTOUT0ALTVDAC0_OUT1ALTOUT1ALTVDAC0_OUT1ALTOUT1ALTVDAC0_OUT0ALTOUT1ALTnX, nY APORTnX, APORTnYAX, BY, … BUSAX, BUSBY, ...POSNEGOPA21X2X3X4X1Y2Y3Y4Y1XOPA2_POPA2_NOUT2OUT2ALTOUT1OUT2OUT3OUT4OUTCEXT1X1Y3X3YCSENCEXT_SENSE2X2Y4X4YOUT2OPA2_POPA2_N1X2X3X4X2X3X4X1Y2Y3Y4Y1XNEXT1NEXT0NEXT1NEXT0NEXT1NEXT0NEXT1NEXT0POSNEG1X2X3X4X1Y2Y3Y4YNEXT0NEXT1NEXT2NEXT2NEXT0NEXT1Figure 8.2. APORT Connection DiagramClient maps for each analog circuit using the APORT are shown in the following tables. The maps are organized by bus, and show theperipheral's port connection, the shared bus, and the connection from specific bus channel numbers to GPIO pins.BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 74
In general, enumerations for the pin selection field in an analog peripheral's register can be determined by finding the desired pin con-nection in the table and then combining the value in the Port column (APORT__), and the channel identifier (CH__). For example, if pinPF7 is available on port APORT2X as CH23, the register field enumeration to connect to PF7 would be APORT2XCH23. The sharedbus used by this connection is indicated in the Bus column.Table 8.4. ACMP0 Bus and Pin MappingPortBusCH31CH30CH29CH28CH27CH26CH25CH24CH23CH22CH21CH20CH19CH18CH17CH16CH15CH14CH13CH12CH11CH10CH9CH8CH7CH6CH5CH4CH3CH2CH1CH0APORT1XBUSAXPF6PF4PF2PF0PC10PC8PC6APORT1YBUSAYPF7PF5PF3PF1PC11PC9PC7APORT2XBUSBXPF7PF5PF3PF1PC11PC9PC7APORT2YBUSBYPF6PF4PF2PF0PC10PC8PC6APORT3XBUSCXPB14PB12PA4PA2PA0PD14PD12PD10APORT3YBUSCYPB15PB13PB11PA5PA3PA1PD15PD13PD11PD9APORT4XBUSDXPB15PB13PB11PA5PA3PA1PD15PD13PD11PD9APORT4YBUSDYPB14PB12PA4PA2PA0PD14PD12PD10BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 75
Table 8.5. ACMP1 Bus and Pin MappingPortBusCH31CH30CH29CH28CH27CH26CH25CH24CH23CH22CH21CH20CH19CH18CH17CH16CH15CH14CH13CH12CH11CH10CH9CH8CH7CH6CH5CH4CH3CH2CH1CH0APORT1XBUSAXPF6PF4PF2PF0PC10PC8PC6APORT1YBUSAYPF7PF5PF3PF1PC11PC9PC7APORT2XBUSBXPF7PF5PF3PF1PC11PC9PC7APORT2YBUSBYPF6PF4PF2PF0PC10PC8PC6APORT3XBUSCXPB14PB12PA4PA2PA0PD14PD12PD10APORT3YBUSCYPB15PB13PB11PA5PA3PA1PD15PD13PD11PD9APORT4XBUSDXPB15PB13PB11PA5PA3PA1PD15PD13PD11PD9APORT4YBUSDYPB14PB12PA4PA2PA0PD14PD12PD10BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 76
Table 8.6. ADC0 Bus and Pin MappingPortBusCH31CH30CH29CH28CH27CH26CH25CH24CH23CH22CH21CH20CH19CH18CH17CH16CH15CH14CH13CH12CH11CH10CH9CH8CH7CH6CH5CH4CH3CH2CH1CH0APORT1XBUSAXPF6PF4PF2PF0PC10PC8PC6APORT1YBUSAYPF7PF5PF3PF1PC11PC9PC7APORT2XBUSBXPF7PF5PF3PF1PC11PC9PC7APORT2YBUSBYPF6PF4PF2PF0PC10PC8PC6APORT3XBUSCXPB14PB12PA4PA2PA0PD14PD12PD10APORT3YBUSCYPB15PB13PB11PA5PA3PA1PD15PD13PD11PD9APORT4XBUSDXPB15PB13PB11PA5PA3PA1PD15PD13PD11PD9APORT4YBUSDYPB14PB12PA4PA2PA0PD14PD12PD10BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 77
Table 8.7. CSEN Bus and Pin MappingPortBusCH31CH30CH29CH28CH27CH26CH25CH24CH23CH22CH21CH20CH19CH18CH17CH16CH15CH14CH13CH12CH11CH10CH9CH8CH7CH6CH5CH4CH3CH2CH1CH0CEXTAPORT1XBUSAXPF6PF4PF2PF0PC10PC8PC6APORT1YBUSAYPF7PF5PF3PF1PC11PC9PC7APORT3XBUSCXPB14PB12PA4PA2PA0PD14PD12PD10APORT3YBUSCYPB15PB13PB11PA5PA3PA1PD15PD13PD11PD9CEXT_SENSEAPORT2XBUSBXPF7PF5PF3PF1PC11PC9PC7APORT2YBUSBYPF6PF4PF2PF0PC10PC8PC6APORT4XBUSDXPB15PB13PB11PA5PA3PA1PD15PD13PD11PD9APORT4YBUSDYPB14PB12PA4PA2PA0PD14PD12PD10Table 8.8. IDAC0 Bus and Pin MappingPortBusCH31CH30CH29CH28CH27CH26CH25CH24CH23CH22CH21CH20CH19CH18CH17CH16CH15CH14CH13CH12CH11CH10CH9CH8CH7CH6CH5CH4CH3CH2CH1CH0APORT1XBUSCXPB14PB12PA4PA2PA0PD14PD12PD10APORT1YBUSCYPB15PB13PB11PA5PA3PA1PD15PD13PD11PD9BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 78
Table 8.9. VDAC0 / OPA Bus and Pin MappingPortBusCH31CH30CH29CH28CH27CH26CH25CH24CH23CH22CH21CH20CH19CH18CH17CH16CH15CH14CH13CH12CH11CH10CH9CH8CH7CH6CH5CH4CH3CH2CH1CH0OPA0_NAPORT1YBUSAYPF7PF5PF3PF1PC11PC9PC7APORT2YBUSBYPF6PF4PF2PF0PC10PC8PC6APORT3YBUSCYPB15PB13PB11PA5PA3PA1PD15PD13PD11PD9APORT4YBUSDYPB14PB12PA4PA2PA0PD14PD12PD10OPA0_PAPORT1XBUSAXPF6PF4PF2PF0PC10PC8PC6APORT2XBUSBXPF7PF5PF3PF1PC11PC9PC7APORT3XBUSCXPB14PB12PA4PA2PA0PD14PD12PD10APORT4XBUSDXPB15PB13PB11PA5PA3PA1PD15PD13PD11PD9BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 79
PortBusCH31CH30CH29CH28CH27CH26CH25CH24CH23CH22CH21CH20CH19CH18CH17CH16CH15CH14CH13CH12CH11CH10CH9CH8CH7CH6CH5CH4CH3CH2CH1CH0OPA1_NAPORT1YBUSAYPF7PF5PF3PF1PC11PC9PC7APORT2YBUSBYPF6PF4PF2PF0PC10PC8PC6APORT3YBUSCYPB15PB13PB11PA5PA3PA1PD15PD13PD11PD9APORT4YBUSDYPB14PB12PA4PA2PA0PD14PD12PD10OPA1_PAPORT1XBUSAXPF6PF4PF2PF0PC10PC8PC6APORT2XBUSBXPF7PF5PF3PF1PC11PC9PC7APORT3XBUSCXPB14PB12PA4PA2PA0PD14PD12PD10APORT4XBUSDXPB15PB13PB11PA5PA3PA1PD15PD13PD11PD9OPA2_NAPORT1YBUSAYPF7PF5PF3PF1PC11PC9PC7APORT2YBUSBYPF6PF4PF2PF0PC10PC8PC6APORT3YBUSCYPB15PB13PB11PA5PA3PA1PD15PD13PD11PD9APORT4YBUSDYPB14PB12PA4PA2PA0PD14PD12PD10BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 80
PortBusCH31CH30CH29CH28CH27CH26CH25CH24CH23CH22CH21CH20CH19CH18CH17CH16CH15CH14CH13CH12CH11CH10CH9CH8CH7CH6CH5CH4CH3CH2CH1CH0OPA2_OUTAPORT1YBUSAYPF7PF5PF3PF1PC11PC9PC7APORT2YBUSBYPF6PF4PF2PF0PC10PC8PC6APORT3YBUSCYPB15PB13PB11PA5PA3PA1PD15PD13PD11PD9APORT4YBUSDYPB14PB12PA4PA2PA0PD14PD12PD10OPA2_PAPORT1XBUSAXPF6PF4PF2PF0PC10PC8PC6APORT2XBUSBXPF7PF5PF3PF1PC11PC9PC7APORT3XBUSCXPB14PB12PA4PA2PA0PD14PD12PD10APORT4XBUSDXPB15PB13PB11PA5PA3PA1PD15PD13PD11PD9VDAC0_OUT0 / OPA0_OUTAPORT1YBUSAYPF7PF5PF3PF1PC11PC9PC7APORT2YBUSBYPF6PF4PF2PF0PC10PC8PC6APORT3YBUSCYPB15PB13PB11PA5PA3PA1PD15PD13PD11PD9APORT4YBUSDYPB14PB12PA4PA2PA0PD14PD12PD10BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 81
PortBusCH31CH30CH29CH28CH27CH26CH25CH24CH23CH22CH21CH20CH19CH18CH17CH16CH15CH14CH13CH12CH11CH10CH9CH8CH7CH6CH5CH4CH3CH2CH1CH0VDAC0_OUT1 / OPA1_OUTAPORT1YBUSAYPF7PF5PF3PF1PC11PC9PC7APORT2YBUSBYPF6PF4PF2PF0PC10PC8PC6APORT3YBUSCYPB15PB13PB11PA5PA3PA1PD15PD13PD11PD9APORT4YBUSDYPB14PB12PA4PA2PA0PD14PD12PD10BGM13P Blue Gecko Bluetooth ® Module Data SheetPin Definitionssilabs.com | Building a more connected world. Rev. 1.0 | 82
9. Package Specifications9.1 BGM13P DimensionsFigure 9.1. BGM13P Package Dimensions9.2 BGM13P Module FootprintThe figure below shows the Module footprint and PCB dimensions.Figure 9.2. BGM13P FootprintBGM13P Blue Gecko Bluetooth ® Module Data SheetPackage Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 83
9.3 BGM13P Recommended PCB Land PatternThe figure below shows the recommended land pattern. The antenna clearance section is not required for BGM13P module versionswith a U.FL connector.Figure 9.3. BGM13P Recommended PCB Land PatternBGM13P Blue Gecko Bluetooth ® Module Data SheetPackage Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 84
10. Tape and Reel Specifications10.1 Tape and Reel SpecificationThis section contains information regarding the tape and reel packaging for the BGM13P Blue Gecko Bluetooth ® Module.10.2 Reel Material and Dimensions• Reel material: Polystyrene (PS)• Reel diameter: 13 inches (330 mm)• Number of modules per reel: 1000 pcs• Disk deformation, folding whitening and mold imperfections: Not allowed• Disk set: consists of two 13 inch (330 mm) rotary round disks and one central axis (100 mm)• Antistatic treatment: Required•Surface resistivity: 104 - 109 Ω/sq.Figure 10.1. Reel Dimension — Side ViewSymbol Dimensions [mm]W0 44.0 +0.5/-.0.0W1 48.0BGM13P Blue Gecko Bluetooth ® Module Data SheetTape and Reel Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 85
10.3 Module Orientation and Tape FeedThe user direction of feed, start and end of tape on reel and orientation of the modules on the tape are shown in the figure below.Figure 10.2. Module Orientation and Feed Direction10.4 Cover Tape InformationFigure 10.3. Cover Tape InformationSymbol Dimensions [mm]Thickness (T) 0.055 +0.005/-0.003Width (W) 37.50 +0.30/-0.10BGM13P Blue Gecko Bluetooth ® Module Data SheetTape and Reel Specificationssilabs.com | Building a more connected world. Rev. 1.0 | 86
11. Soldering Recommendations11.1 Soldering RecommendationsThis section describes the soldering recommendations for the BGM13P module.BGM13P is compatible with industrial standard reflow profile for Pb-free solders. The reflow profile used is dependent on the thermalmass of the entire populated PCB, heat transfer efficiency of the oven, and particular type of solder paste used.• Refer to technical documentations of particular solder paste for profile configurations.• Avoid usining more than two reflow cycles.• A no-clean, type-3 solder paste is recommended.• A stainless steel, laser-cut and electro-polished stencil with trapezoidal walls should be used to assure good solder paste release.• Recommended stencil thickness is 0.100mm (4 mils).• Refer to the recommended PCB land pattern for an example stencil aperture size.• For further recommendation, please refer to the JEDEC/IPC J-STD-020, IPC-SM-782 and IPC 7351 guidelines.BGM13P Blue Gecko Bluetooth ® Module Data SheetSoldering Recommendationssilabs.com | Building a more connected world. Rev. 1.0 | 87
12. Certifications12.1 Qualified Antenna TypesThe BGM13P has been designed to operate with a standard 2.14 dBi dipole antenna. Any antenna of a different type or with a gainhigher than 2.14 dBi is strictly prohibited for use with this device. Using an antenna of a different type or gain more than 2.14 dBi willrequire additional testing for FCC, CE and IC. The required antenna impedance is 50 Ω.Table 12.1. Qualified Antennas for BGM13PAntenna Type Maximum GainDipole 2.14 dBi12.2 BluetoothBGM13P is based on prequalified RF-PHY component QDID 101562. To make a Bluetooth end product listing the module integratorshould combine this QDID with the prequalified Wireless Gecko Link Layer and Wireless Gecko Host components.12.3 CEThe BGM13P22 module is in conformity with the essential requirements and other relevant requirements of the Radio Equipment Direc-tive (RED) (2014/53/EU). Please note that every application using the BGM13P22 will need to perform the radio EMC tests on the endproduct, according to EN 301 489-17. Separate RF testing is not required provided that the customer follows the module manufacturer'srecommendations and instructions and does not make modifications (e.g. to the provided antenna solutions or requirements). A formalDoC is available via www.silabs.comBGM13P Blue Gecko Bluetooth ® Module Data SheetCertificationssilabs.com | Building a more connected world. Rev. 1.0 | 88
12.4 FCCThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and2. This device must accept any interference received, including interference that may cause undesirable operation.Any changes or modifications not expressly approved by Silicon Labs could void the user’s authority to operate the equipment.FCC RF Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specif-ic operating instructions for satisfying RF exposure compliance. This transmitter meets both portable and mobile limits as demonstratedin the RF Exposure Analysis and SAR test report. This transmitter must not be co-located or operating in conjunction with any otherantenna or transmitter except in accordance with FCC multi-transmitter product procedures.OEM Responsibilities to comply with FCC Regulations:OEM integrator is responsible for testing their end-product for any additional compliance requirements required with this module instal-led (for example, digital device emissions, PC peripheral requirements, etc.).• With BGM13P22 the antenna(s) must be installed such that a minimum separation distance of 9 mm is maintained between the radi-ator (antenna) and all persons at all times.• The transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter except in accord-ance with FCC multi-transmitter product procedures.Important Note:In the event that the above conditions cannot be met (for certain configurations or co-location with another transmitter), then the FCCauthorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM inte-grator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.End Product LabelingThe variants of BGM13P Modules are labeled with their own FCC ID. If the FCC ID is not visible when the module is installed insideanother device, then the outside of the device into which the module is installed must also display a label referring to the enclosedmodule. In that case, the final end product must be labeled in a visible area with the following:"Contains Transmitter Module FCC ID: QOQBGM13P"Or"Contains FCC ID: QOQBGM13P"The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module orchange RF related parameters in the user manual of the end product.BGM13P Blue Gecko Bluetooth ® Module Data SheetCertificationssilabs.com | Building a more connected world. Rev. 1.0 | 89
12.5 ISED CanadaISEDCThis radio transmitter (IC: 5123A-BGM13P) has been approved by Industry Canada to operate with the antenna types listed above, withthe maximum permissible gain indicared. Antenna types not included in this list, having a gain greater than the maximum gain indicatedfor that type, are strictly prohibited for use with this device.This device complies with Industry Canada’s license-exempt RSS standards. Operation is subject to the following two conditions:1. This device may not cause interference; and2. This device must accept any interference, including interference that may cause undesired operation of the deviceRF Exposure StatementException from routine SAR evaluation limits are given in RSS-102 Issue 5.The models BGM13P22A and BGM13P22E meet the given requirements when the minimum separation distance to human body is 20mm.RF exposure or SAR evaluation is not required when the separation distance is same or more than stated above. If the separation dis-tance is less than stated above the OEM integrator is responsible for evaluating the SAR.OEM Responsibilities to comply with IC RegulationsThe BGM13P modules have been certified for integration into products only by OEM integrators under the following conditions:• The antenna(s) must be installed such that a minimum separation distance as stated above is maintained between the radiator (an-tenna) and all persons at all times.• The transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter.As long as the two conditions above are met, further transmitter testing will not be required. However, the OEM integrator is still respon-sible for testing their end-product for any additional compliance requirements required with this module installed (for example, digitaldevice emissions, PC peripheral requirements, etc.).IMPORTANT NOTEIn the event that these conditions cannot be met (for certain configurations or co-location with another transmitter), then the ISEDCauthorization is no longer considered valid and the IC ID cannot be used on the final product. In these circumstances, the OEM integra-tor will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate ISEDC authorization.End Product LabelingThe BGM13P module is labeled with its own IC ID. If the IC ID is not visible when the module is installed inside another device, then theoutside of the device into which the module is installed must also display a label referring to the enclosed module. In that case, the finalend product must be labeled in a visible area with the following:“Contains Transmitter Module IC: 5123A-BGM13P ”or“Contains IC: 5123A-BGM13P”The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module orchange RF related parameters in the user manual of the end product.BGM13P Blue Gecko Bluetooth ® Module Data SheetCertificationssilabs.com | Building a more connected world. Rev. 1.0 | 90
ISEDC (Français)Industrie Canada a approuvé l’utilisation de cet émetteur radio (IC: 5123A-BGM13P) en conjonction avec des antennes de type dipo-laire à 2.14dBi ou des antennes embarquées, intégrée au produit. L’utilisation de tout autre type d’antenne avec ce composant est pro-scrite.Ce composant est conforme aux normes RSS, exonérées de licence d'Industrie Canada. Son mode de fonctionnement est soumis auxdeux conditions suivantes:1. Ce composant ne doit pas générer d’interférences.2. Ce composant doit pouvoir est soumis à tout type de perturbation y compris celle pouvant nuire à son bon fonctionnement.Déclaration d'exposition RFL'exception tirée des limites courantes d'évaluation SAR est donnée dans le document RSS-102 Issue 5.Les modules BGM13P22A and BGM13P22E répondent aux exigences requises lorsque la distance minimale de séparation avec lecorps humain est de 20 mm.La déclaration d’exposition RF ou l'évaluation SAR n'est pas nécessaire lorsque la distance de séparation est identique ou supérieure àcelle indiquée ci-dessus. Si la distance de séparation est inférieure à celle mentionnées plus haut, il incombe à l'intégrateur OEM deprocédé à une évaluation SAR.Responsabilités des OEM pour une mise en conformité avec le Règlement du Circuit IntégréLe module BGM13P a été approuvé pour l'intégration dans des produits finaux exclusivement réalisés par des OEM sous les conditionssuivantes:• L'antenne (s) doit être installée de sorte qu'une distance de séparation minimale indiquée ci-dessus soit maintenue entre le radiateur(antenne) et toutes les personnes avoisinante, ce à tout moment.• Le module émetteur ne doit pas être localisé ou fonctionner avec une autre antenne ou un autre transmetteur que celle indiquéeplus haut.Tant que les deux conditions ci-dessus sont respectées, il n’est pas nécessaire de tester ce transmetteur de façon plus poussée. Ce-pendant, il incombe à l’intégrateur OEM de s’assurer de la bonne conformité du produit fini avec les autres normes auxquelles il pour-rait être soumis de fait de l’utilisation de ce module (par exemple, les émissions des périphériques numériques, les exigences de pé-riphériques PC, etc.).REMARQUE IMPORTANTEans le cas où ces conditions ne peuvent être satisfaites (pour certaines configurations ou co-implantation avec un autre émetteur), l'au-torisation ISEDC n'est plus considérée comme valide et le numéro d’identification ID IC ne peut pas être apposé sur le produit final.Dans ces circonstances, l'intégrateur OEM sera responsable de la réévaluation du produit final (y compris le transmetteur) et de l'ob-tention d'une autorisation ISEDC distincte.Étiquetage des produits finisLes modules BGM13P sont étiquetés avec leur propre ID IC. Si l'ID IC n'est pas visible lorsque le module est intégré au sein d'un autreproduit, cet autre produit dans lequel le module est installé devra porter une étiquette faisant apparaitre les référence du module inté-gré. Dans un tel cas, sur le produit final doit se trouver une étiquette aisément lisible sur laquelle figurent les informations suivantes:“Contient le module transmetteur: 5123A-BGM13P ”or“Contient le circuit: 5123A-BGM13P”L'intégrateur OEM doit être conscient qu’il ne doit pas fournir, dans le manuel d’utilisation, d'informations relatives à la façon d'installerou de d’enlever ce module RF ainsi que sur la procédure à suivre pour modifier les paramètres liés à la radio.BGM13P Blue Gecko Bluetooth ® Module Data SheetCertificationssilabs.com | Building a more connected world. Rev. 1.0 | 91
12.6 JapanThe BGM13P22A and BGM13P22E are certified in Japan with certification number 209-J00282.Since September 1, 2014 it is allowed (and highly recommended) that a manufacturer who integrates a radio module in their hostequipment can place the certification mark and certification number (the same marking/number as depicted on the label of the radiomodule) on the outside of the host equipment. The certification mark and certification number must be placed close to the text in theJapanese language which is provided below. This change in the Radio Law has been made in order to enable users of the combinationof host and radio module to verify if they are actually using a radio device which is approved for use in Japan.Certification Text to be Placed on the Outside Surface of the Host Equipment:Translation of the text:“This equipment contains specified radio equipment that has been certified to the Technical Regulation Conformity Certification underthe Radio Law.”The "Giteki" marking shown in the figures below must be affixed to an easily noticeable section of the specified radio equipment. Notethat additional information may be required if the device is also subject to a telecom approval.Figure 12.1. GITEKI Mark and IDFigure 12.2. GITEKI MarkBGM13P Blue Gecko Bluetooth ® Module Data SheetCertificationssilabs.com | Building a more connected world. Rev. 1.0 | 92
13. Revision HistoryRevision 1.0February 2018• Updated 4.1 Electrical Characteristics with latest characterization data and test limits.• Added certification details.Revision 0.2December 2017• Added V2 part numbers to Table 2.1 Ordering Information on page 3.Revision 0.1September 15, 2017• Initial Release.BGM13P Blue Gecko Bluetooth ® Module Data SheetRevision Historysilabs.com | Building a more connected world. Rev. 1.0 | 93
http://www.silabs.comSilicon Laboratories Inc.400 West Cesar ChavezAustin, TX 78701USASimplicity StudioOne-click access to MCU and wireless tools, documentation, software, source code libraries & more. Available for Windows, Mac and Linux!IoT Portfoliowww.silabs.com/IoTSW/HWwww.silabs.com/simplicityQualitywww.silabs.com/qualitySupport and Communitycommunity.silabs.comDisclaimerSilicon Labs intends to provide customers with the latest, accurate, and in-depth documentation of all peripherals and modules available for system and software implementers using or intending to use the Silicon Labs products. Characterization data, available modules and peripherals, memory sizes and memory addresses refer to each specific device, and "Typical" parameters provided can and do vary in different applications. Application examples described herein are for illustrative purposes only. Silicon Labs reserves the right to make changes without further notice and limitation to product information, specifications, and descriptions herein, and does not give warranties as to the accuracy or completeness of the included information. Silicon Labs shall have no liability for the consequences of use of the information supplied herein. This document does not imply or express copyright licenses granted hereunder to design or fabricate any integrated circuits. The products are not designed or authorized to be used within any Life Support System without the specific written consent of Silicon Labs. A "Life Support System" is any product or system intended to support or sustain life and/or health, which, if it fails, can be reasonably expected to result in significant personal injury or death. Silicon Labs products are not designed or authorized for military applications. Silicon Labs products shall under no circumstances be used in weapons of mass destruction including (but not limited to) nuclear, biological or chemical weapons, or missiles capable of delivering such weapons.Trademark InformationSilicon Laboratories Inc.® , Silicon Laboratories®, Silicon Labs®, SiLabs® and the Silicon Labs logo®, Bluegiga®, Bluegiga Logo®, Clockbuilder®, CMEMS®, DSPLL®, EFM®, EFM32®, EFR, Ember®, Energy Micro, Energy Micro logo and combinations thereof, "the world’s most energy friendly microcontrollers", Ember®, EZLink®, EZRadio®, EZRadioPRO®, Gecko®, ISOmodem®, Micrium, Precision32®, ProSLIC®, Simplicity Studio®, SiPHY®, Telegesis, the Telegesis Logo®, USBXpress®, Zentri and others are trademarks or registered trademarks of Silicon Labs. ARM, CORTEX, Cortex-M3 and THUMB are trademarks or registered trademarks of ARM Holdings. Keil is a registered trademark of ARM Limited. All other products or brand names mentioned herein are trademarks of their respective holders.

Navigation menu