SilverStone Technology ES02USB 2.4GHz wireless computer power and reset remote switch User Manual ES02 USB MANUAL EN

Download:
Mirror Download [FCC.gov]
Document ID	3169181
Application ID	wH8fAGLtMwQak8nY8L4JFQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	31.9kB (398698 bits)
Date Submitted	2016-10-20 00:00:00
Date Available	2016-10-20 00:00:00
Creation Date	2016-09-13 18:12:45
Producing Software	Acrobat Distiller 10.0.0 (Windows)
Document Lastmod	2016-10-19 16:27:03
Document Title	Microsoft Word - ES02-USB_MANUAL_EN
Document Creator	PScript5.dll Version 5.2.2
Document Author:	frank

Product Model No. SST-ES02-USB
Product Description : 2.4GHz wireless computer power and reset remote switch
Package Content
1 x ES02 adapter
1 x 250mm cable
1 x Remote
To install ES02 properly, please follow the steps listed below:
￭ Turn off your computer and unplug the power cord and all cables
￭ Remove your computer’s case cover
￭ Unplug the power cable and reset cable from motherboard
Installation Guide
STEP 1
Carefully install ES02 into the USB 9 pin connector on the motherboard (Figure 1.1), then
connect the “POWER SW” and “RESET SW” to the corresponding pin headers on the
motherboard. (Figure 1.2)
Figure 1.1
USB 9 pin Connector
Figure 1.2
Power / Rest pin photo
* If you cannot find the corresponding pin header to connect on your motherboard, please
refer to your motherboard manual.
** If you have difficulty connecting to the motherboard’s USB 9 pin header, please use the
included 90 degree adapter.
STEP 2
Please remove the screw on the remote to insert the CR 2032 battery. Then secure the
remote by reinstalling the removed screw.
STEP 3
Plug in the power cord and other required cables by your computer then press the power
button to turn it on.
Q&A
1. Why can’t I turn on the computer by pressing the power button?
Please check if the LED indicator blinks when pressing the Power or Reset button, if it
doesn’t blink, then you should change the battery.
If it blinks, but still can’t turn on the computer, please try the following steps:
（1）Unplug the computer’s power cord.
（2）Check if the POWER SW and RESET SW are connected in the correct position, be sure
they are not loose.
If these steps do not work, then check in motherboard’s BIOS / UEFI menu to make sure USB
power on functions have been enabled.
2. Both LED indicators on the remote and the ES02 adapter both lit up, why doesn’t my
computer turn on when I press the button?
Solution: Re‐sync the remote and the ES02 adapter.
STEP 1: Please press and hold the black button for 3 seconds on the ES02 adapter until its
indicator lights up
STEP 2: Press any button on the remote until the indicator light turns off on the ES02 adapter
Warranty Information:
This product has a limited 1 year warranty in North America, Europe, and Australia.
For information on warranty
periods in other regions, please contact your reseller or SilverStone authorized distributor.
Additional info & contacts
For North America (usasupport@silverstonetek.com) SilverStone Technology in North America may repair or replace
defective product with refurbished product that is not new but has been functionally tested. Replacement product will
be warranted for remainder of the warranty period or thirty days, whichever is longer.
All power supplies should be
sent back to the place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate RMA
procedure with SilverStone Technology in USA by first downloading the “USA RMA form for end-users” form from the
below link and follow its instructions. http://silverstonetek.com/contactus.php For Australia only
(support@silverstonetek.com) Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not amount to a major failure. Please refer to above “Warranty terms &
conditions” for further warranty details. SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist.,
New Taipei City 235 Taiwan R.O.C. + 886-2-8228-1238 (standard international call charges apply) For Europe
(support.eu@silverstonetek.de) For all other regions (support@silverstonetek.com)
Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment。
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : frank
Create Date                     : 2016:09:13 18:12:45+08:00
Modify Date                     : 2016:10:19 16:27:03+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2016:10:19 16:27:03+08:00
Format                          : application/pdf
Title                           : Microsoft Word - ES02-USB_MANUAL_EN
Creator                         : frank
Producer                        : Acrobat Distiller 10.0.0 (Windows)
Document ID                     : uuid:be043736-a88b-44da-88a9-7d43377521fc
Instance ID                     : uuid:6fd88c55-b9d4-407d-af18-dd45e90a3d6c
Page Count                      : 3

EXIF Metadata provided by EXIF.tools