Simcom 0606020080117 GSM/GPRS Module User Manual

Shanghai Simcom Ltd. GSM/GPRS Module Users Manual

Users Manual

      Development Kit Manual SIM345-EVB_UGD_V1.02
SIM345 EVB User Guide                                                             SIM345-EVB_UGD_V1.02   15.02.2008   2 Document Title: SIM345 EVB User Guide Version: 1.02 Date: 2008-2-15 Status: Release Document Control ID: SIM345-EVB_UGD_V1.02    General Notes SIMCom offers this information as a service to its customers, to support application and engineering efforts that use the products designed by SIMCom. The information provided is based upon requirements specifically provided to SIMCom by the customers. SIMCom has not undertaken any independent search for additional relevant information, including any information that may be in the customer’s possession. Furthermore, system validation of this product designed by SIMCom within a larger electronic system remains the responsibility of the customer or the customer’s system integrator. All specifications supplied herein are subject to change.      Copyright This document contains proprietary technical information which is the property of SIMCom Limited., copying of this document and giving it to others and the using or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. All rights reserved in the event of grant of a patent or the registration of a utility model or design. All specification supplied herein are subject to change without notice at any time.    FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices).  This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; (2) This device must accept any interference received, including interference that may cause undesired operation.  Copyright © SIMCom Limited. 2008
SIM345 EVB User Guide                                                             SIM345-EVB_UGD_V1.02   15.02.2008   3Contents Contents ............................................................................................................................................3 1 SIM345 EVB .................................................................................................................................5 2 EVB accessory ...............................................................................................................................7 3 Accessory Interface........................................................................................................................8 3.1 Power Interface ....................................................................................................................8 3.2 Audio Interface.....................................................................................................................8 3.3 SIM card interface................................................................................................................9 3.4 Antenna Interface ...............................................................................................................10 3.5 RS232 Interface..................................................................................................................11 3.6 Operating Status LED ........................................................................................................12 4 Test Interface................................................................................................................................13 4.1 Serial Interface ...................................................................................................................13 4.2 J102---KEY & POWER .....................................................................................................14 4.3 J103---GPIO.......................................................................................................................15 5 EVB and accessory equipment.....................................................................................................16 6 Illustration ....................................................................................................................................17 6.1 Running..............................................................................................................................17 6.2 Connecting Net and calling................................................................................................17 6.3 Downloading......................................................................................................................17 6.4 Turns off.............................................................................................................................17  Figure Index FIGURE 1: EVB TOP VIEW...................................................................................................................5 FIGURE 2: EVB BOTTOM VIEW..........................................................................................................6 FIGURE 3: EVB ACCESSORY...............................................................................................................7 FIGURE 4: POWER INTERFACE..........................................................................................................8 FIGURE 5: AUDIO INTERFACE ...........................................................................................................8 FIGURE 6: SIM CARD INTERFACE.....................................................................................................9 FIGURE 7: ANTENNA INTERFACE ...................................................................................................10 FIGURE 8: UART1 SERIAL PORT AND UART4 SERIAL PORT...................................................... 11 FIGURE 9: UART2 SERIAL PORT ...................................................................................................... 11 FIGURE 10: FLASH LED .....................................................................................................................12 FIGURE 11: TEST INTERFACE OVERVIEW.....................................................................................13 FIGURE 12: J1 INTERFACE ................................................................................................................13 FIGURE 13: J102 INTERFACE ............................................................................................................14 FIGURE 14: J3 INTERFACE ................................................................................................................15 FIGURE 15: EVB AND ACCESSORY EQUIPMENT .........................................................................16
SIM345 EVB User Guide                                                             SIM345-EVB_UGD_V1.02   15.02.2008   4SCOPE  This document give the usage of SIM345 EVB, user can get useful info about the SIM345 EVB quickly through this document.  The SIM345 only supports 850MHz/1900MHz functions.  This document is subject to change without notice at any time.
SIM345 EVB User Guide                                                             SIM345-EVB_UGD_V1.02   15.02.2008   51 SIM345 EVB  Figure 1: EVB TOP view
SIM345 EVB User Guide                                                             SIM345-EVB_UGD_V1.02   15.02.2008   6 Figure 2: EVB BOTTOM view A:  SIM345 module interface B:    SIM card interface C:  Headset interface D:    Charge switch, switch on or off charging function E:    Download switch, turn on or off download function F:    ON/OFF key, turn on or turn off SIM345 G:  Buzzer H:    Expand port, such as keypad port, main serial port, SPI port   I:      Main serial port UART1 for downloading, AT command transmitting, data exchanging J:   General Purpose output or input ports for customers’ application, but can be multiplexed with another auxiliary serial port for internal ONLY K:  Hole for fixing the antenna L:  Source adapter interface M:    FLASH LED light N:  Hole for fixing the SIM345 O:  Headphones interface P:    Reset key, reset module for exigency  Q:    VBATT switch, switch the voltage source from the adaptor or external battery S:    Auxiliary serial port UART2
SIM345 EVB User Guide                                                             SIM345-EVB_UGD_V1.02   15.02.2008   72 EVB accessory  Figure 3: EVB accessory A: Antenna B: Antenna transmit line C: Headset D: 5V DC source adapter E: USB to serial port line
SIM345 EVB User Guide                                                             SIM345-EVB_UGD_V1.02   15.02.2008   83 Accessory Interface 3.1 Power Interface  Figure 4: Power Interface Pin  Signal  I/O  Description 1 Adapter input I 5V/2.5A DC source input 3.2 Audio Interface  Figure 5: Audio Interface
SIM345 EVB User Guide                                                             SIM345-EVB_UGD_V1.02   15.02.2008   9Headset interface: Pin  Signal  I/O  Description 1  MIC2P  I  Positive microphone input   2  SPK2P  O  Positive speak output 3  SPK2N  O  Negative speak output 4  MIC2N  I  Negative microphone input  Earphone interface: Pin  Signal  Input/Output  Description 5 MIC1P&SPK1P I/O Auxiliary positive input and output   3.3 SIM card interface  Figure 6: SIM card interface
SIM345 EVB User Guide                                                             SIM345-EVB_UGD_V1.02   15.02.2008   103.4 Antenna Interface    Figure 7: Antenna Interface
SIM345 EVB User Guide                                                             SIM345-EVB_UGD_V1.02   15.02.2008   113.5 RS232 Interface  Figure 8: UART1 Serial Port   Main port UART1——A full functional seven-wires serial port Auxiliary serial port UART2——An auxiliary three-wires serial interface  Main serial port(UART1): Pin  Signal  I/O  Description 1 DCD  O Data carrier detection 2 TXD1  O Transmit data 3 RXD1  I Receive data 4 DTR  I Data Terminal Ready 5 GND    GND 7 RTS  I Request to Send 8 CTS  O Clear to Send 9 RI  O Ring Indicator   Figure 9: UART2 Serial Port
SIM345 EVB User Guide                                                             SIM345-EVB_UGD_V1.02   15.02.2008   12Auxiliary serial port (UART2): Pin  Signal  I/O  Description 2 RXD2  O Receive data 3 TXD2  I Transmit data 5 GND    GND  3.6 Operating Status LED Pin  Signal  Description 1 Flash LED Network status indication LED 2 Power light VBATT power supply status indication   Figure 10: Flash LED   Working state of Flash LED as list: State  Module function Off  Module is not running Permanent on  Module does not find the network 60ms On/ 3000ms +50%Off  Module find the network 60ms On/ 852ms +50% Off  GPRS communication
SIM345 EVB User Guide                                                             SIM345-EVB_UGD_V1.02   15.02.2008   134 Test Interface  Figure 11: Test interface overview 4.1 Serial Interface J104—UART1 serial port  Figure 12: J1 Interface RS232 Interface Pin List:   Pin  Signal  I/O  Description 1 RTS  I Request to Send 2 DCD  O Data carrier detection
SIM345 EVB User Guide                                                             SIM345-EVB_UGD_V1.02   15.02.2008   143 RXD1  O Receive data 4 TXD1  I Transmit data 5 DTR  I Data Terminal Ready 6 CTS  O  Clear to Send 7 DSR  I  8  GPIO4  I/O  Transmit or receive data 9 RI  O Ring Indicator 10 GPO1  O  Transmit data 4.2 J102---KEY & POWER  Figure 13: J102 Interface KEY & POWER Pin List Pin  Signal  I/O  Description 1 COL0  O 2 ROW0  I 3 COL1  O 4 ROW1  I 5 COL 2  O 6 ROW2  I 7 COL 3  O 8 ROW3  I 9 COL 4  O 10 ROW4  I Keypad array interface 11 CHG_IN     12 GND  I   13 VDD    14 VBATT  I
SIM345 EVB User Guide                                                             SIM345-EVB_UGD_V1.02   15.02.2008   154.3 J103---GPIO  Figure 14: J3 Interface SPI & I/O Interface Pin List: Pin  Signal  I/O  Description 1  SPI_IO/ SDA  I/O  IIC interface 2 GPO2  O General Purpose Output Port 3 SPI_CLK/ SCL O IIC interface 4  TEMP_BAT  I  ADC input for battery temperature measurement 5 /RST  I Reset module for emergency 6 GPIO0  I/O General Purpose Input/Output Port 7  /INTR  I  External interrupt input 8  GPO0 / SPI_AUX  O  General Purpose Output Port 9  GPI  I  General Purpose Input 10  SPI_EN/ GPO3  O  General Purpose Output Port 11  ON/OFF  I  To switch on or off the module 12  VCC  O  Output digital power supply 13  AUXV0  I  Auxiliary ADC input 14  GPIO5  I/O  General Purpose Input/Output Port
SIM345 EVB User Guide                                                             SIM345-EVB_UGD_V1.02   15.02.2008   165 EVB and accessory equipment    At normal circumstance, the EVB and its accessory are equipped as the Figure 15    Figure 15: EVB and accessory equipment
SIM345 EVB User Guide                                                             SIM345-EVB_UGD_V1.02   15.02.2008   176 Illustration 6.1 Running (1) Connect the SIM345 module to the 60 pins connector on SIM345 EVB, inserting 5V direct current source adapter, switching the S103 switch on off state, S202 switch on ON state; (2) Press the ON/OFF for about 2 second, and then SIM345 module begins running.  You can see the light on the EVB flashing at a certain frequency. By the state, you can judge whether the EVB and SIM345 can run or not. No function and test can be executed when we have not connected necessary accessories. 6.2 Connecting Net and calling   (1) Connect the serial port line to the MAIN serial port, open the HyperTerminal (AT command windows) on your Personal computer, the location of the HyperTerminal in windows2000 is START→accessory→communication→HyperTerminal. Set correct Baud Rate and COM number. The Baud Rate of SIM345 is 115200, and the COM number based on which USB port your serial port line insert in, you should select such as COM3 or COM4 etc. (2) Connect the antenna to the SIM345 module using an antenna transmit line, insert SIM card into the SIM card interface, and insert headphones or headset into its interface. (3) Act on the step of running which mentioned above, power on the system, typing the AT command in the HyperTerminal, and then the SIM345 module will execute its corresponding function. 6.3 Downloading   Connect the serial port line to the MAIN serial port, connect the direct current source adapter, run the download program and press the START key, then switch the POWER switch on ON state, DOWNLOAD switch on ON state, and then EVB provide the function of downloading. 6.4 Turns off Turn off SIM345 module: press the ON/OFF for about 2 second, SIM345 module will be turned off.
 ●RF exposure requirements  To allow compliance with RF exposure requirements,the SIM345’s maximum output power is 33dBm in GSM850/GSM900 band,or 30dBm in DCS1800/PCS1900 band,and the maximum antenna gain is 3dBi,and the minimum cable loss is 0.5db.  ●The Antenna Parameter of SIM345  GSM850/GSM900 DCS1800/PCS1900 VSWR(Max.)Operation band ≤2.5 ≤2.5 VSWR(Min.)Outside the operation band ≥3 ≥3 GAIN(Min)(dBi) >0dBi > 1dBi Output Power (dBm)  >30dBm  >27dBm  ●The Module’s Conducted Reception Characteristic  GSM850/GSM900 DCS1800/PCS1900 Conducted RX Level @BER<2%(dBm) -106 -106  ●IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of about eight inches (20cm) between the radiator and your body.          Contact us: Shanghai SIMCom Ltd. Add: SIM Technology Building, No. 700, Yishan Road, Shanghai,P. R. China 200233 Tel: +86 21 5427 8900 Fax: +86 21 5427 6035 URL: www.sim.com

Navigation menu