Simcom 1403022014009 WCDMA/HSDPA Module User Manual SIM5320ALD EVB User Guide

Download:
Mirror Download [FCC.gov]
Document ID	2391730
Application ID	zCIhg6lp/zWzzVmYpmPQZA==
Document Description	SIM5320ALD_EVB_User Guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	158.9kB (1986218 bits)
Date Submitted	2014-09-17 00:00:00
Date Available	2014-09-30 00:00:00
Creation Date	2014-08-27 17:47:30
Document Lastmod	2014-08-27 17:47:30
Document Title	SIM5320ALD_EVB_User Guide
Document Creator	WPS Office 个人版
Document Author:	cheng.shi

Development Kit Manual
SIM5320ALD_EVB_User Guide_V1.01
Document Title:
SIM5320ALD EVB User Guide
Version:
1.01
Date:
2014-08-20
Status:
Release
Document Control ID:
SIM5320ALD_EVB_User Guide_V1.01
General Notes
SIMCom offers this information as a service to its customers, to support application and
engineering efforts that use the products designed by SIMCom. The information provided is
based upon requirements specifically provided to SIMCom by the customers. SIMCom has
not undertaken any independent search for additional relevant information, including any
information that may be in the customer’s possession. Furthermore, system validation of this
product designed by SIMCom within a larger electronic system remains the responsibility of
the customer or the customer’s system integrator. All specifications supplied herein are
subject to change.
Copyright
This document contains proprietary technical information which is the property of SIMCo
Limited., copying of this document and giving it to others and the using or communication of
the contents thereof, are forbidden without express authority. Offenders are liable to the
payment of damages. All rights reserved in the event of grant of a patent or the registration of
a utility model or design. All specification supplied herein are subject to change without
notice at any time.
Copyright © Shanghai SIMCom Wireless Solutions Ltd. 2011
Smart Machine Smart Decision
Contents
Contents...............................................................................................................................................2
Figure Index........................................................................................................................................ 2
Table Index........................................................................................................................................3
Version History................................................................................................................................... 3
1 Overview.......................................................................................................................................... 4
2 SIM5320ALD EVB..........................................................................................................................5
3 EVB accessories............................................................................................................................... 7
4 Accessory Interface.......................................................................................................................... 8
4.1 Power Interface.......................................................................................................................8
4.2 SIM card interface.................................................................................................................. 9
4.3 Antenna Interface................................................................................................................. 10
4.4 RS232 Interface....................................................................................................................10
4.5 Operating Status LED.......................................................................................................... 11
4.6 USB interface....................................................................................................................... 12
4.7 Switch interface....................................................................................................................13
4.8 IO interface...........................................................................................................................14
5 Quickly start................................................................................................................................... 16
5.1 Running................................................................................................................................ 16
5.2 Installing Driver................................................................................................................... 16
5.3 Connecting Net and calling..................................................................................................17
5.4 Downloading........................................................................................................................ 17
5.5 Turning off............................................................................................................................18
6.6 Measuring the current consumption.....................................................................................18
Figure Index
FIGURE 1: EVB VIEW............................................................................................................................ 6
FIGURE 2: EVB ACCESSORY............................................................................................................... 7
FIGURE 3: POWER SELECTION JUMPER...........................................................................................8
FIGURE 5: SIM CARD SOCKET............................................................................................................ 9
FIGURE 6: MAIN ANTENNA CONNECTOR...................................................................................... 10
FIGURE 8: SERIAL PORT.....................................................................................................................10
FIGURE 9: STATUS LED.......................................................................................................................11
FIGURE 10: USB INTERFACE............................................................................................................. 12
FIGURE 11: SWITCH INTERFACE...................................................................................................... 13
FIGURE 12: IO INTERFACE................................................................................................................. 14
FIGURE 14: USB INTERFACE UPDATE PROCEDURE....................................................................18
FIGURE 15: CURRENT CONSUMPTION IN THE SLEEP MODE.................................................... 19
SIM5320ALD EVB User Guide
20.08.2014
Smart Machine Smart Decision
Table Index
TABLE 1:SIM5320 EVB KEY FEATURES.............................................................................................4
TABLE 2: POWER SUPPLY.................................................................................................................... 8
TABLE 4: SIM CARD SOCKET.............................................................................................................. 9
TABLE 5: SERIAL INTERFACE........................................................................................................... 10
TABLE 6: NETWORK STATUS LED.................................................................................................... 11
TABLE 7: USB INTERFACE................................................................................................................. 12
TABLE 8: SWITCH INTERFACE.......................................................................................................... 13
TABLE 9: IO INTERFACE.....................................................................................................................14
Version History
Data
Version
Description of change
Author
2014-08-20
1.01
Origin
3G Team
SIM5320ALD EVB User Guide
20.08.2014
Smart Machine Smart Decision
1 Overview
This document gives the usage of SIM5320ALD EVB, user can get useful information about the
SIM5320ALD EVB quickly through this document. All the functions of the SIM5320ALD can be
used by this board.
NOTE: This document is subject to change without notice at any time.
Table 1:SIM5320ALD EVB Key features
Feature
Implementation
Power supply
1: DC 6.0V~9.0V
2: USB 5.0V power supply
functions
SIM5320ALD EVB User Guide
UART interface
USB2.0 interface
SIMCARD interface
I2C interface
ADC interface
POWER_ON key/Reset key
RF enable/disable (flight mode) switch
UART Control switch
20.08.2014
Smart Machine Smart Decision
2 SIM5320ALD EVB
SIM5320ALD EVB User Guide
20.08.2014
Smart Machine Smart Decision
Figure 1: EVB view
A:
B:
C:
D:
E:
F:
G:
H:
I:
J:
K:
L:
M:
N:
O:
P:
SIM5320ALD module
Reset keypad
Power on/off keypad
IO interface 1（including GPIO, ADC, SPI, etc）
LED indicator（including network status，operating status）
Power supply selection jumper
UART enable/disable switch
RF enable/disable (flight mode) switch
USB connector
SIM card socket
IO interface 2（including GPIO, UART, I2C, etc）
Main antenna SMA
Handset connector
UART connector
Adapter connector
SIM5320ALD JTAG test point
All hardware Sub-interfaces included in SIM5320ALD EVB are described in detail in following
chapters.
SIM5320ALD EVB User Guide
20.08.2014
Smart Machine Smart Decision
3 EVB accessories
Figure 2: EVB accessory
A: USB to UART cable
B: RF antenna
Antenna Model: WT-C&G-28-90
Frequency Range (MHz) 824 ~ 960 1710 ~ 1990
VSWR ≤1.5 (900MHz) ≤2 (1800MHz)
Gain: 1dBi
Input Impedance (Ω): 50
Polarization Type: Vertical
Connector Type: SMA
C: USB cable
D: 6V DC adapter
NOTE: The maximum gain of the RF antenna gain should not exceed 1dBi for end-users.
SIM5320ALD EVB User Guide
20.08.2014
Smart Machine Smart Decision
4 Accessory Interface
4.1 Power Interface
Figure 3: Power selection jumper
Table 2: Power supply
Signal
Input/Output
Description
Adapter_VBAT
3.8V/2A DC source input
USB_VBAT
3.8V/0.5A DC source input
VBAT
DC source input
If user wants to use DC adapter as power supply, Adapter_VBAT should be connected to VBAT
on J202 through a jumper as following figure shows.
This board could be powered by USB bus. User should connect the USB pin. USB_VBAT is the
USB power out.If user wants to use USB VBUS to power up the module, please connect
connector VBAT with connector USB_VBAT as following figure shows.and disconnect
Adapter_VBAT.
SIM5320ALD EVB User Guide
20.08.2014
Smart Machine Smart Decision
4.2 SIM card interface
Figure 4: SIM card socket
Table 3: SIM card socket
Pin
Signal
V_USIM
Input/Output
Description
USIM Card Power output automatic
output on USIM mode，one is
3.0V±10%, another is 1.8V±10%.
Current is about 10mA.
USIM_RESET
USIM Card Reset
USIM_CLK
USIM Card Clock
GND
SIM_VPP
V_USIM
USIM_DATA
I/O
USIM Card data I/O
SIM5320ALD EVB User Guide
Ground
20.08.2014
Smart Machine Smart Decision
4.3 Antenna Interface
Figure 5: Main Antenna connector
4.4 RS232 Interface
Figure 7: Serial Port
J205 is 9 pins standard RS232 UART interface. It can be connected to a PC directly.
Table 4: Serial Interface
Pin
Signal
SIM5320ALD EVB User Guide
I/O
Description
10
20.08.2014
Smart Machine Smart Decision
DCD
Data carrier detection
TXD
Transmit data
RXD
Receive data
DTR
Data Terminal Ready
GND
Ground
NC
NC
RTS
Request to Send
CTS
Clear to Send
RI
Ring Indicator
4.5 Operating Status LED
Figure 8: Status LED
Table 5: Network status LED
D301 Status
Module Status
Off
On
Module is not running
Module is running, or voice call is connected
800ms On/ Off
Module find the network and registered
200ms On/ Off
Data communication
LED
I/O
Description
D201
ADAPTER power indicator
D202
USB power indicator
SIM5320ALD EVB User Guide
11
20.08.2014
Smart Machine Smart Decision
4.6 USB interface
Figure 9: USB Interface
It is a normal 4Pin USB connector.
Table 6: USB interface
Pin
Signal
I/O
Description
USB_VBUS
5V
USB_DM
I/O
D+ line
USB_ DP
I/O
D- line
GND
SIM5320ALD EVB User Guide
Ground
12
20.08.2014
Smart Machine Smart Decision
4.7 Switch interface
Figure 10: Switch Interface
Table 7: Switch interface
Switch
Signal
I/O
Description
RS232 chip SHUTDOWN
UART switch
GPIO4
RF switch (S301)
ON : Normal mode
OFF : Flight mode
RESET
Reset the module
PWRER_ON
Power on the module
SIM5320ALD EVB User Guide
13
20.08.2014
Smart Machine Smart Decision
4.8 IO interface
Figure 11: IO Interface
Table 8: IO interface
SIM5320ALD EVB User Guide
14
20.08.2014
Smart Machine Smart Decision
Signal
I/O
Description
GPIO40
I/O
GPIO
POWER_ON
Power on the module
RESET
Reset the module
GPIO41
I/O
GPIO
GPIO43
I/O
GPIO
GPIO44
I/O
GPIO
VDD_3V
3V power supply
CURRENT_SINK
Current sink source
ADC1
ADC
GPIO1
Network status
GPIO4
GPIO42
I/O
RF control switch
GPIO
SPI_CS_N
SPI Chip selection
SPI_MISO
SPI Master input Slave output
SPI_MOSI
SPI Master output Slave input
ADC2
ADC
Bit 0 for sensing key press on pad
matrix
Bit 1 for sensing key press on pad
matrix
Bit 2 for sensing key press on pad
matrix
Bit 3 for sensing key press on pad
matrix
Bit 4 for sensing key press on pad
matrix
KEYPAD_0
Bit 0 drive to the pad matrix
KEYPAD_1
Bit 1 drive to the pad matrix
KEYPAD_2
Bit 2 drive to the pad matrix
KEYPAD_3
Bit 3 drive to the pad matrix
KEYPAD_4
Bit 4 drive to the pad matrix
I2C_SDA
I/O
I2C data
I2C_SCL
I2C clock
GPIO0
General input pin for module wake up interrupt.
GPIO2
General input pin.
GPIO3
General output pin.
GPIO5
General output pin.
KEYSENSE_N0
KEYSENSE_ N1
KEYSENSE_ N2
KEYSENSE_ N3
KEYSENSE_ N4
SIM5320ALD EVB User Guide
15
20.08.2014
Smart Machine Smart Decision
5 Quickly start
5.1 Running
There are two ways to provide power supply to SIM5320ALD module: one is to use the 6V power
supply provided in the EVB kit; the other is to use USB port of personal computer.
(1) When user use the power supply, if user insert 6V DC source adapter, user should connect
ADAPTER_VBAT pin and VBAT pin on the EVB board; then insert a valued SIM card and
check if the antenna is connected, and make sure that RF control switch is set to ON; finally
press the on/off switch for about 1 second, and then SIM5320ALD module will begin
running.
(2) Another option is to use USB port of Computer as power supply. To do so, user need to
connect USB_VBAT pin and VBAT pin on the EVB board, and make sure that RF control
switch is set to ON. Firstly insert the sim card and connect the antenna, then connect the PC
with USB-to-USB cable and press the Power_ON button for one second, then SIM5320ALD
will start running.
User can see the light on the EVB flashing at a certain frequency about 1.25Hz. By the state,
user can judge whether the EVB and SIM5320ALD is running or not. No function and test can
be executed if user has not connected necessary accessories.
NOTE: This EVB board supports USB power supply when user connects USB_VBAT and
VBAT together.
5.2 Installing Driver
There are 3 ways to connect the module to user’s computer and communicate via HyperTerminal:
(1) Using USB-TO-USB cable;
(2) Using UART-TO-USB cable;
(3) Using UART-TO-UART cable.
In the first case, user need install the module USB driver, which can be got from our FAE or sales;
For the UART to USB driver, user may get it from the CD in the EVB kit; If user use UART to
UART cable, there are certain points to be noticed. One can use UART to UART cable in EVB kit,
if the customers want to use their own UART to UART cable, please make sure that the pin
sequences of it is same as those of cable in EVB kit, pin sequences of which are shown in Figure
9.
SIM5320ALD EVB User Guide
16
20.08.2014
Smart Machine Smart Decision
5.3 Connecting Net and calling
Once user installs the driver, user can follow steps below to connect to Network.
(1) When user use a UART-UART cable, user need to connect the serial port line to the serial port,
open the HyperTerminal (AT command windows) on user’s Personal computer. The location of
the HyperTerminal in windows2000/XP/Vista can be found from START→accessory→
communication→HyperTerminal. Please set the correct Baud Rate and COM port number, the
Baud Rate of SIM5320ALD is 115200, and the COM port number is based on which UART port
user’s serial port line is inserted, user should select the port such as COM1 or COM2 etc.
(2) Connect the antenna to the SIM5320ALD module using an antenna transmit line, insert SIM
card into the SIM card holder, and insert handset into its sockets.
(3) Follow the steps of running which has been mentioned above in Sector 5.1, power on the
system, type the AT command from the HyperTerminal, and then the SIM5320ALD module will
execute its corresponding function. For example, if user type “AT”, then it should respond “OK”;
if user type “ATI”, it should display product identification information.
(4) If user want to use USB to USB cable, user need to connect the cable to USB port of the
module and the computer, then follow step 1~3.
(5) If user use UART to USB cable, user need to connect the cable to module serial port and the
USB port of the computer, then follow step 1~3.
5.4 Downloading
Connect the USB port line to the USB port, connect the direct current source adapter, run the
download program, and choose the correct image, please follow the QDL downloading menu for
the operation. Update procedure is described in the figure below.
SIM5320ALD EVB User Guide
17
20.08.2014
Smart Machine Smart Decision
START
Module power on
Double click QDL.exe,
update begin
Connect module USB slot and PC by USB cable
Waiting until download finish,
QDL quit out automatically
Install module driver on windows OS.
Copy new firmware into QDL data folder
Update success
Close all app software which
use USB virtual ports
Figure 13: USB interface update procedure
5.5 Turning off
Press the POWER_ON for about 1 second, SIM5320ALD module will be turned off.
NOTE: If user uses USB to power on the module, just disconnect the USB cable to turn off.
6.6 Measuring the current consumption
User can measure SIM5320ALD current consumption in the sleep mode on our EVB. User need
to follow steps.
(1) Remove the jumper from J202, and provide a 3.8V DC power supply (such as: Agilent 66319B)
for VBAT on SIM5320ALD EVB;
(2) Install a SIM card and a RF antenna;
(3) Shutdown UART by S204;
(4) Remove the USB cable;
(5) Power on SIM5320ALD;
SIM5320ALD will enter sleep mode automatically. User can measure SIM5320ALD current
consumption. Test report is described in the figure below.
SIM5320ALD EVB User Guide
18
20.08.2014
Smart Machine Smart Decision
C urrent (A )
109.495m
M ax
C urrent W aveform
89.298m
69.101m
H igh
48.904m
28.708m
8.511m
Low
M in
-11.686m
0.00s
4.00s
8.00s
12.00s
Tim e
C a lcula te d M e a sure m e nts
D c 3.2109m A
R m s 12.8841m A
Lo w 750.2690uA
M in -5.9155m A
H ig h 47.2376m A
M a x 103.9990m A
15.99s
19.99s
23.99s
( 170H z sa m p le ra te )
Figure 14: current consumption in the sleep mode
Contact us:
Shanghai SIMCom Wireless Solutions Ltd.
Add: Building A，SIM Technology Building，No.633，Jinzhong Road，Changning
Disdrict，Shanghai P.R. China 200335
Tel: +86-21-3252 3300
Fax: +86-21-3252 3301
URL: www.sim.com
SIM5320ALD EVB User Guide
19
20.08.2014

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 20
Create Date                     : 2014:08:27 17:47:30+00:00
Modify Date                     : 2014:08:27 17:47:30+00:00
Title                           : 
Author                          : cheng.shi
Creator                         : WPS Office 个人版

EXIF Metadata provided by EXIF.tools