Simcom 1703022017008 WCDMA\EDGE\GPRS\GSM module User Manual UDV 1703022017008 REV 1

Shanghai Simcom Ltd. WCDMA\EDGE\GPRS\GSM module UDV 1703022017008 REV 1

UDV-1703022017008_User Manual_REV 1

SIM5320J Document - 1 - SIM5320J User Manual Compliance Information FCC Compliance Statement: This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This device must accept any interference received, including interference that may cause undesired operation. Product that is a radio transmitter is labeled with FCC ID. FCC Caution: (1)Exposure to Radio Frequency Radiation. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. (2) Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. (3) This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. (4) Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. (5) the modules FCC ID is not visible when installed in the host, or (6) if the host is marketed so that end users do not have straight forward commonly used methods for access to remove the module so that the FCC ID of the module is visible; then an additional permanent label referring to the enclosed module: Contains Transmitter Module FCC ID: UDV-1703022017008 or Contains FCC ID: UDV-1703022017008 must be used. 1. SIM5320J Description 1.1. Summarize Designed for global market, SIM5320J is a dual-band GSM/GPRS/EDGE and dual-band UMTS /HSDPA that works on frequencies of EGSM 900 MHz, DCS 1800 MHz and WCDMA 2100/850MHz. The SIM5320J support HSDPA. User can choose the module based on the wireless network configuration. With a tiny configuration of 30*30*2.9 mm and integrated functions, SIM5320J can meet almost any space requirement in users’ application, such as Smart phone, PDA phone, industrial handhelds, machine-to-machine, vehicle applications, etc.. There are 80 pins on SIM5320J, which provide most application interfaces for customers’ board.
SIM5320J Document - 2 - 1.2. Feature ●　 Dual-Band UMTS/HSDPA 850/2100MHz ●　 Duad-Band GSM/GPRS/EDGE 900/1800MHz ●　 GPRS multi-slot class 12 ●　 EDGE multi-slot class 12 ●　 Output power - UMTS 850/2100: 0.25W - GSM900: 2W - DCS1800: 1W ●　 Control Via AT Commands ●　 Supply voltage range: 3.4~ 4.2V ●　 Extended operation temperature: -40℃ to +85℃ ●　 Dimension: 30 * 30 * 2.9 mm ●　 Weight: 5.6g ●　 80 LCC pads include – Interface to external SIM 3V/1.8V – USB 2.0 – UART – I2C – Keypad – SPI – PCM – GPIO – ADC
SIM5320J Document - 3 - 1.3. Pin 1.4. Picture Figure 1: Top and Bottom view of SIM5320J
SIM5320J Document - 4 - 1.5. Dimension Figure 2: Dimention
SIM5320J Document - 5 - 2. Detail Block Diagram Figure 3: Block diagram of SIM5320J 3. Electrical and Reliability Characteristics 3.1. Absolute Maximum Ratings The absolute maximum ratings stated in following table are stress ratings under non-operating conditions. Stresses beyond any of these limits will cause permanent damage to SIM5320J. Table 1: Absolute maximum ratings Parameter Min Max Unit Voltage at digital pins (1.8v mode) -0.3 1.8+0.3 V Voltage at digital pins (2.6v mode) -0.3 2.6+0.3 V Voltage at VBAT -0.5 6.0 V Voltage at VRTC 1.5 3.2 V Voltage at USB_VBUS -0.5 6.0 V 3.2. USIM Card Interface Characteristics Table 2: USIM card interface characteristics
SIM5320J Document - 6 - 3.3. SIM_VDD Characteristics 3.4. Current Consumption (VBAT = 3.8V) Table 3: Current consumption GSM Sleep mode (without USB connection) GSM900 Sleep @DRX=2 4.5mA Sleep @DRX=5 2.7mA Sleep @DRX=9 2.3mA DCS1800 Sleep @DRX=2 4.5mA Sleep @DRX=5 2.7mA Sleep @DRX=9 2.3mA GSM Sleep Mode (with USB suspended) GSM900 Sleep @DRX=2 4.6mA Sleep @DRX=5 2.8mA Sleep @DRX=9 2.5mA DCS1800 Sleep @DRX=2 4.6mA Sleep @DRX=5 2.8mA Sleep @DRX=9 2.5mA DATA mode, GPRS ( 1 Rx,4 Tx ) CLASS 12 GSM 900 @power level #5 <660mA,Typical 484mA DCS1800 @power level #0 <530mA,Typical 346mA DATA mode, GPRS ( 3Rx, 2 Tx ) CLASS 12 GSM 900 @power level #5 <440mA,Typical 332mA DCS1800 @power level #0 <400mA,Typical 260mA EDGE Data DATA mode, EDGE( 1 Rx,4 Tx ) CLASS 12 GSM 900 @power level #8 <500mA,Typical 332mA DCS1800 @power level #2 <450mA,Typical 291mA DATA mode, EDGE( 3Rx, 2 Tx ) CLASS 12 GSM 900 @power level #8 <330mA,Typical 231mA DCS1800 @power level #2 <300mA,Typical 206mA UMTS Sleep Mode (without USB connection) WCDMA 2100 Sleep @DRX=9 2.2mA Pin name 3.0V mode 1.8V mode Min Typ Max Min Typ Max V_USIM 2.7 3.00 3.3 1.65 1.8 2.0 USIM_RESET 0.8* V_USIM 3.00 V_USIM 0.8* V_USIM 1.8 V_USIM USIM_CLK 0.7* V_USIM 3.00 V_USIM 0.8* V_USIM 1.8 V_USIM USIM_DATA 0.7* V_USIM 3.00 V_USIM 0.8* V_USIM 1.8 V_USIM
SIM5320J Document - 7 - Sleep @DRX=8 2.7 mA Sleep @DRX=6 4.7mA WCDMA 850 Sleep @DRX=9 2.2mA Sleep @DRX=8 2.7 mA Sleep @DRX=6 4.7mA UMTS Sleep Mode (with USB suspended) WCDMA 2100 Sleep @DRX=9 2.4mA Sleep @DRX=8 2.8 mA Sleep @DRX=6 4.8mA WCDMA 850 Sleep @DRX=9 2.4mA Sleep @DRX=8 2.8 mA Sleep @DRX=6 4.8mA HSDPA Data WCDMA 2100 @Power 23dBm CQI=22 Typical 610mA @Power 21dBm CQI=5 Typical 540mA @Power -5dBm CQI=22 Typical 270mA WCDMA 850 @Power 23dBm CQI=22 Typical 550mA @Power 21dBm CQI=5 Typical 490mA @Power -5dBm CQI=22 Typical 220mA 3.5. Electro-Static Discharge SIM800H is an ESD sensitive component, so more attention should be paid to the procedure of handling and packaging. The ESD test results are shown in the following table. Table 4: The ESD characteristics (Temperature: 25℃, Humidity: 45 %) Part Contact discharge Air discharge VBAT,GND ±4KV ±6KV UART,USB ±2KV ±6KV Antenna port ±4KV ±6KV Other ports ±2KV ±2KV 4. Radio Characteristics 4.1. Module RF Output Power The following table shows the module conducted output power. Table 5: SIM5320J conducted RF output power Frequency Max Min E-GSM900 33dBm ±2dB 5dBm ± 5dB
SIM5320J Document - 8 - DCS1800 30dBm ±2dB 0dBm ± 5dB E-GSM900 (8-PSK) 27dBm ±3dB 5dBm ± 5dB DCS1800 (8-PSK) 26dBm +3/-4dB 0dBm ±5dB WCDMA 2100 24dBm +1/-3dB -56dBm ±5dB WCDMA 850 24dBm +1/-3dB -56dBm ±5dB 4.2. Module RF Receive Sensitivity The following table shows the module’s conducted receive sensitivity, it is tested under static condition. Table 6: SIM5320J conducted RF receive sensitivity Frequency Receive sensitivity E-GSM900 < -106dBm DCS1800 < -106dBm WCDMA 2100 < -108dBm WCDMA 850 < -106dBm 4.3. Module Operating Frequencies The following table shows the module’s operating frequency range. Table 7: SIM5320J operating frequencies Frequency Receiving Transmission E-GSM900 925 ～960 MHz 880 ～915 MHz DCS1800 1805～1880 MHz 1710～1785 MHz WCDMA2100 2110～2170 MHz 1920～1980 MHz WCDMA 850 869 ～894 MHz 824 ～849 MHz 5. Antenna interface SIM5320J provides RF antenna interface. Customer’s antenna should be located in the host board and connected to module’s antenna pad through micro-strip line or other types of RF trace and the trace impedance must be controlled in 50Ω.The maximum gain of the GSM antenna gain should not exceed 2dBi considering the SAR radio. SIMCom recommends that the total insertion loss between the antenna pad and antenna should meet the following requirements: ●　 GSM900<0.5dB ●　 DCS1800 <0.9dB ●　 WCDMA 2100<0.9dB ●　 WCDMA 850<0.5dB
SIM5320J Document - 9 - To facilitate the antenna tuning and certification test, a RF connector and an antenna matching circuit should be added. The following figure is the recommended circuit. Figure1: antenna matching circuit In this figure, the components L101,C101,C102 is used for antenna matching, the value of components can only be got after the antenna tuning, usually, they are provided by antenna vendor. By default, the L101 is 0 ohm resistors, and the C101, C102 are reserved for tuning. The RF test connector in the figure is used for the conducted RF performance test, and should be placed as close as to the module’s antenna pin. The traces impedance between components must be controlled in 50ohm.
SIM5320J Document - 10 - 5.1 Dipole Antenna Reference Design PCB Mount these devices with brown mark facing up. Units: mm Line width should be designed to provide 50Ω im ped a nc e matching characteristics 5.2 Dipole Antenna Reference Design Schematic

Navigation menu