Simcom 20170406 Smart Module User Manual

Shanghai Simcom Ltd. Smart Module

a href="https://usermanual.wiki/Simcom" itemprop="url"> Simcom >

Contents

User Manual

Smart Module SIMT 1502 ________________________________________________________________ Hardware Version: V1.2 Software Version:CB03_8909_V4.4_20160901 Manufacturer SHANGHAI SIMCOM LIMITED Building A,SIM Technology Building,No.633, Jinzhong Road, Changning District Expert Importers: Datalogic Srl Address: Via San Vitalino 13 – 40012 Lippo di Calderara di Reno
SHANGHAI SIMCOM LIMITED 2 This device is restricted to indoor operation only in the band 5150 - 5350 MHz. (Only for devices that support 802.11 5 GHz functions) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Please notice that if the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains FCC ID: UDV-20170406” any similar wording that expresses the same meaning may be used. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The module is limited to OEM installation ONLY. The OEM integrator is responsible for ensuring that the end-user has no manual instruction to remove or install module. The module is limited to installation in mobile application; A separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and difference antenna configurations. There is requirement that the grantee provide guidance to the host manufacturer for compliance with Part 15B requirements. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Download:
Mirror Download [FCC.gov]
Document ID3505317
Application IDmWo88oJoOU78nbUaHWc8+Q==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize123.66kB (1545760 bits)
Date Submitted2017-08-10 00:00:00
Date Available2017-08-10 00:00:00
Creation Date2017-08-10 11:57:22
Producing SoftwareGPL Ghostscript 8.64
Document Lastmod2017-08-10 03:57:25
Document TitleMicrosoft Word - User manual
Document CreatorPScript5.dll Version 5.2.2
Document Author: eason-ys_wang
FCC ID Filing: UDV-20170406

Navigation menu