Simu U S 1-5M CUBS 1C& 5C Mobile 2008805/2008806 User Manual Hz 1 ch Mobile CuBs 5125969A

Download:
Mirror Download [FCC.gov]
Document ID	2907894
Application ID	0LP7EAg7o75mF14G54+hBw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	233kB (2912527 bits)
Date Submitted	2016-02-22 00:00:00
Date Available	2016-02-22 00:00:00
Creation Date	2016-02-18 11:20:02
Producing Software	Corel PDF Engine Version 17.6.0.1021
Document Lastmod	2016-02-18 19:50:56
Document Title	Hz 1 ch Mobile CuBs 5125969A.cdr
Document Creator	CorelDRAW X7
Document Author:	Sanders Glen

- 2008806
1 Transmission indicator
2 Low ba er indicator
3 Selected Channel: 1,2,3,4,5
or All (All = Ch 1-5 simultaneously)
UP control bu on
STOP control bu on
DOWN control bu on
Select bu on
Programming bu on
9 Transmi er range. (Maximum transmission me: 10 seconds)
10 Protec on Index. For indoor use.
11 Opera ng temperature
Storage temperature
- Frequency: 433.42 MHz
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions
- This device may not cause harmful interference and
- This device must accept any interference received, including interference that may cause undesired operation
Warning! Changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment.
5125969A
USA - HZ Mobile Transmitter 1 channel - 2008805
Read carefully these instructions before any use.
S.A.S. au capital de 5 000 000 € - Z.I. Les Giranaux - BP71 - F70103 Arc-Les-Gray CEDEX - RCS VESOUL B 425 650 090 - SIRET 425 650 090 00011 - n° T.V.A CEE FR 87 425 650 090
13mm
33/64
inch
Transmission
indicator Led
100%
25mm
63/64
inch
I.P
STOP/I.P
125mm
4 59/64 inch
3mm
IP30
1s
1s
6m max.
20ft ma x
14°F(-10°C)
1s
0%
3mm
inch
1⁄8
40mm
137/64 inch
140°F(+60°C)
I.P= Intermediate position
1 Adding the transmitter to an existing installation
1.1. Open the memory of the motor using its individual control transmitter:
- Press the Prog. Button for about 3 sec. on the motor’s individual control transmitter, the motor will jog.
PROG
2 s.
1.2. Then validate the operation from the new transmitter to be programmed:
- Press the Prog. Button for about 1 sec. on the new transmitter, the motor will jog.
2 s.
PROG
- For group controls from the new transmitter, repeat operations 1.1 and 1.2 for each motor of the group.
- For main controls from the new transmitter, repeat operations 1.1 and 1.2 for each motor of the installation.
- To delete a transmitter from the memory of a motor, perform operation 1.1 with a programmed transmitter, then perform operation 1.2 with the transmitter to be
deleted.
For more complete information about programming, please refer to the instructions of the motor used.
2 Programming and use Intermediate Position (I.P):
Refer to Hz motor instructions to make sure it has this feature.
Programming:
- Move the motor to the desired position.
- Press 5 seconds on theSTOP button.
The motor will jog.
5s
Use:
- Press theSTOP button for 0.5 second. The motor runs to the
intermediate position.
0.5s
3 Technical data
- Compatible with motors & receivers
- Wireless switch/class III – Protection Index: IP30
- Maximum transmission time: 10 seconds
- Operating temperature: 14oF (-10oC) to 140oF (60oC)
- Storage temperature: -22oF (-30oC) to 158oF (70oC)
- Transmitter range: 20ft max. (6m max) throught 2 concrete walls in normal
- Power: 3V lithium battery type CR 2430. Lifetime ± 3 years when 4 pressures of 1s./day
- Keep away from children
- Do not position the transmitter near metal in order to ensure its proper operation and
prevent reduced range
- A radio appliance using the same frequency (for example : hi-fi radio headphones)
may deteriorate our product’s performance.
- Do not immerse the product, avoid splashing of liquids.
- Do not use abrasive products or solvents to clean the product.
- Frequency: 433.420 MHz
Replacing the battery
- Power supply is not required for saving data.
- Data need not be programmed once again when the cell is
changed.
- Do not recharge the battery.
- Please separate and dispose of the appliance, batteries
and used batteries at a recycling location.
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions
- This device may not cause harmful interference and
- This device must accept any interference received, including interference that may cause undesired operation
Warning! Changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Sanders Glen
Create Date                     : 2016:02:18 11:20:02-05:00
Modify Date                     : 2016:02:18 19:50:56-05:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : Sanders Glen
Title                           : Hz 1 ch Mobile CuBs 5125969A.cdr
Creator Tool                    : CorelDRAW X7
Metadata Date                   : 2016:02:18 19:50:56-05:00
Producer                        : Corel PDF Engine Version 17.6.0.1021
Document ID                     : uuid:8fa52697-bae3-476b-bae5-66bb366ca402
Instance ID                     : uuid:ab889716-cf4b-4a26-9b98-457de68d73d0
Page Count                      : 3
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)

EXIF Metadata provided by EXIF.tools