Sintai Optical ISHOW1000 Hand-held Projector User Manual
Sintai Optical (Shenzhen) Co., Ltd. Hand-held Projector
User manual
![](/img.php?id=1917034&img=bg1.png)
User Manual
![](/img.php?id=1917034&img=bg2.png)
CONTENTS
English
CONTENTS ...................................................... 1
BEFORE YOU START ...................................... 3
FCC Warning ........................................................................ 3
For Customers in Europe ...................................................... 4
About this Manual ................................................................. 4
SAFETY PRECAUTIONS .................................5
GETTING READY ............................................6
Accessories Included ............................................................ 6
Part Names ........................................................................... 7
Charging Battery ................................................................... 8
Downloading and installing iShow (wireless projector) app .. 9
Basic Operations of the Projector ....................10
Turning on the projector ........................................................ 10
Setting up the projector using the support ............................ 10
Adjusting focus ..................................................................... 11
Turning off the projector ........................................................ 11
Resetting the projector .......................................................... 11
2
Setup iShow (wireless projector) app for
projection .........................................................12
For iOS system ..................................................................... 12
For Android system ............................................................... 13
For Windows system ............................................................ 15
Set the application (available only in wireless
connection) .......................................................17
SSID ..................................................................................... 17
Hibernation / Sleep Mode ..................................................... 17
Keystone Correction ............................................................. 18
About .................................................................................... 18
Using HDMI for projection ................................19
Firmware Update ..............................................20
Specications ...................................................21
![](/img.php?id=1917034&img=bg4.png)
3
FCC Warning
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Changes or modications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
BEFORE YOU START
1
![](/img.php?id=1917034&img=bg5.png)
4
For Customers in Europe
"CE" mark indicates that this product complies with the European
requirements for safety, health, environment, and customer
protection. "CE" marked products are intended for sales in Europe.
This symbol [crossed-out wheel bin WEEE Annex IV] indicates
separate collection of electrical waste and electronic equipment in
the European countries. Please do not throw the equipment into
domestic refuse. Please use the return and collection systems
available in your country for proper, safe disposal of this product.
About this Manual
Thank you for purchasing this KODAK iShow 1000 Pico Projector. Please
read this manual carefully and keep it in a safe place for future reference.
Windows is registered in the United States and other countries by
Microsoft Corporation, and its trademark use rights are reserved by
Microsoft Corporation.
Product names and trademarks involved in the Manual are for illustrative
and identication purposes only. All of them are the registered
trademarks or copyrights of their original companies.
This manual provides you with instructions on how to use your new
KODAK iShow 1000 Pico Projector. Every effort has been made to en-
sure that the contents of this manual are accurate, however JK Imaging
Ltd. reserves the right to make changes without notice.
![](/img.php?id=1917034&img=bg6.png)
5
When using a pico projector, please note the following safety precautions to
prevent damage to the product.
Do not dispose of improperly or expose to extreme heat.
Do not operate the pico projector in moist or wet environments. Exposure
to water may cause electrical shock or other injury.
Avoid exposure to extreme temperatures as this may damage the
pico projector.
Do not operate the pico projector if damaged. Disassembling the pico
projector will void the warranty.
Do not point the pico projector directly into your eyes or those of anyone
else while in use.
Do not place or store the pico projector on a wet surface or in places
where dripping water or sand may come in contact with the
pico projector; doing so may cause irreparable damage.
Keep the pico projector out of reach of babies, small children and
animals.
Avoid placing pico projector on a vibrating or an unstable surface.
If the projector lens is dirty, use a soft cleaning cloth to clean the lens.
Do not use pico projector in the following types of locations.
1. In rain, very humid or dusty environments.
2. In a place where pico projector can be exposed directly to sunlight or
subject to high temperatures, e.g. inside a closed car in summer.
3. In a place where the pico projector is subject to a high magnetic eld,
e.g. near motors, transformers or magnets.
2SAFETY PRECAUTIONS
![](/img.php?id=1917034&img=bg7.png)
6
3GETTING READY
Accessories Included
Your KODAK iShow 1000 Pico Projector box should contain the pico projector
you purchased along with the following accessories. If anything is missing or
appears to be damaged, please contact your retailer.
AC Adapter
Warranty Card
STOP
Service Card
CD-ROMQuick Start Guide
Quick Start Guide
![](/img.php?id=1917034&img=bg8.png)
7
Part Names
Focus Slider
Earphone jack
Power inlet
Reset hole
Power Button
HDMI Port
Tripod Receptacle
Support
Lens
Status Indicator
Speaker
![](/img.php?id=1917034&img=bg9.png)
8
Charging Battery
1. Ensure the projector is turned off and connect it to the power charger.
2. Insert the plug of the power charger into the wall outlet to charge the
battery.
3. Charging indicator:
Red: Charging
Green: Charging complete
4. To have maximum battery life, charge the battery for at least 4 hours the
rst time.
![](/img.php?id=1917034&img=bga.png)
9
Downloading and installing iShow (wireless projector) app
1. For iOS system users: Please search for the iShow (wireless projector)
app in the App Store, download the app, and install it on your device.
2. For Android system users: Please search for the iShow (wireless
projector) app in Google Play, download the app, and install it on
your device.
3. For Windows 8/7 system users: Please use the installing software item
on the CD-ROM (included) to conduct the installation of the iShow
(wireless projector) app.
![](/img.php?id=1917034&img=bgb.png)
10
4
Turning on the projector
1. Press and hold the power button for three seconds to power up the
projector. The button can be released when the status indicator lights up.
2. The projector will display the start up screen.
Pico Projector
Setting up the projector using the support
1. Open the support.
2. Place the projector on a stable surface.
Basic Operations of the Projector
![](/img.php?id=1917034&img=bgc.png)
11
Adjusting focus
1. Move the focus slider to adjust the clarity of the
projected image.
2. Stop moving the slider once the projected image
becomes clear.
Turning off the projector
1. Before turning off the projector, close any les that are being displayed.
2. Press and hold the power button for three seconds to turn off the
projector.
Resetting the projector
In case the projector acts erratically and/or the system crashes,
please press the reset hole (located on the bottom of the projector)
with a ne-like object (a paper-clip) to reset the projector.
The projector will shut down and restart to the normal state.
![](/img.php?id=1917034&img=bgd.png)
12
5
Due to each operation system compatibility, some documents may
experience difculty of formatting. We recommend to use PDF le
format to minimize any format compatibility while projecting.
While your device is wirelessly connected to the KODAK iShow 1000
Pico Projector, any device live streaming function (such as YouTube ®,
Facebook ®) and web browsers will be disconnected from the internet.
You cannot be wirelessly connected to more than one device at a time.
For iOS system
1. To correctly use KODAK iShow 1000 Pico Projector to project data
from your device. You may rst need to download the iShow (wireless
projector) app into your device, then sync documents from
computer to your device.
2. To down load iShow (wireless projector) app . Turn on your device
and activate internet connection rst. Open the App Store ® in your
device and search iShow (wireless projector) app , download and
install it on your device.
3. To sync documents. First, use the your device's data cable connect the
device to your computer, and turn on iTunes ® in the computer.
4. Find your device name (iPhone, iPad or iPod touch) shown in the iTunes
screen and click on it to enter the device's 「Summary」 pane.
5. Once entering the device's 「Summary」 pane, click the 「Apps」 on
the top command line, and nd the iShow (wireless projector) app icon
at the lower side of Apps pane and click the icon to add les you
would like to project.
6. Once completed adding les, unplug the data cable, and remove the
connection between the device and computer.
7. Power on your KODAK iShow 1000 Pico Projector by pressing the power
button for 3 seconds.
Setup iShow (wireless projector) app
for projection
![](/img.php?id=1917034&img=bge.png)
13
8. When the pico projector starts, your device's wireless network will
automatically detect the signal “iShow-P02xxxxxxx” (signal name is the
same as the SSID name, which can be set by the user). Select this signal
and your device will be connected to the projector.
9. Click on the installed iShow (wireless projector) app on your
device and the le selection pane will show up as below image.
10. Select the le you want to project by tapping on the applicable le in the
selection pane.
11. By tapping the le type icons (Documents, Pictures, Video Files) at the
top of the selection pane, you may navigate through your les much
easier while projecting.
For Android system
1. To correctly use KODAK iShow 1000 Pico Projector to project data from
your Android device. You may rst need to download the iShow (wireless
projector) app into your Android device, then sync documents from
computer to your Android device.
2. To down load iShow (wireless projector) app . Turn on your
Android device and activate internet connection rst. Open the Google
Play ® in your Android device and search iShow (wireless projector)
app , download and install it on your Android device.
![](/img.php?id=1917034&img=bgf.png)
14
3. Once completing iShow (wireless projector) app installation, you
may directly jump to step 6 start connecting your device and KODAK
iShow 1000 Pico Projector to project.
If you still need sync documents into Android device before projecting,
please follow step 4 instructions.
4. To sync documents into Android device. You may use cable connection
to sync and save les into Android device's disk anywhere to enable
iShow (wireless projector) app locate les in the device.
If you prefer wirelessly transfer les into Android device, remember to
download and save the les into Android device rst to enable iShow
(wireless projector) app locate les in the device.
5. Once les are completely saved in Android device, you are ready to
proceed step 6.
6. To connect Android device and KODAK iShow 1000 Pico Projector. First,
entering the setting menu and activate wireless function in Android device.
Second, power on your KODAK iShow 1000 Pico Projector by pressing
the power button for 3 seconds.
7. When the pico projector starts, your Android device's wireless network
will automatically detect the signal “iShow-P02xxxxxxx” (signal name is
the same as the SSID name, which can be set by the user). Select this
signal and your Android device will be connected to the projector.
8. Click on the installed iShow (wireless projector) app on your
Android device and the le selection pane will show up as below image.
![](/img.php?id=1917034&img=bg10.png)
15
First time using iShow (wireless projector) app on your Android
device, the scanning process may take a period of time to complete.
The scanning time varies by Android version and quantity of les on
the device.
9. Select the le you want to project by tapping on the applicable le in the
selection pane.
10. By tapping the le type icons (Documents, Pictures, Video Files) at the
top of the selection pane, you may navigate through your les much
easier while projecting.
For Windows system
1. Use enclosed CD-ROM to install iShow (wireless projector) app on
your computer.
2. Power on your KODAK iShow 1000 Pico Projector by pressing the power
button for 3 seconds.
3. When the pico projector starts, your computer’s wireless network will
automatically detect the signal “iShow-P02xxxxxxx” (signal name is the
same as the SSID name, which can be set by the user). Select this signal
and your computer will be connected to the projector.
4. Click on the installed iShow (wireless projector) app on your
computer and the le selection pane will show up as below image.
![](/img.php?id=1917034&img=bg11.png)
16
5. Click the setting button on the interface of iShow (wireless
projector) app, then select 「Add File Folders」 to add the folders
(you can add up to 10 folders) you would like to project in the le
management.
You can also choose 「Open File」 to select a single le in the le
management, and click 「Send」 to project.
6. Click the setting button again to return to the previous interface,
select the le you want to project by tapping on the applicable le in the
selection pane.
7. By tapping the le type icons (Documents, Pictures, Video Files) at the
top of the selection pane, you may navigate through your les much
easier while projecting.
Transmission speeds of wireless network differ due to different
hardware congurations.
During your use of iShow (wireless projector) app, please use
genuine operating system, in order to ensure the normal operation of
the program.
iShow (wireless projector) app supports the use of cloud data.
However, when downloading from the cloud, the cloud software may
modify the name of the le.
To project Ofce les in Windows operating system, the following two
plug-ins must be installed for Microsoft Ofce 2007 or earlier versions:
.netframework3.5 download address:
http://www.microsoft.com/en-us/download/details.aspx?id=21
Microsoft Ofce 2007 plug-in download address:
http://www.microsoft.com/en-us/download/details.aspx?id=7
![](/img.php?id=1917034&img=bg12.png)
17
6
In iShow (wireless projector) app, tap the Setting button to congure
appropriate settings in iShow (wireless projector) app. The menu tree
where the following operations are found under the settings button vary by
device and version.
You can congure:
SSID
You may change the name of the wireless network. You may also set the
network security, and set the wireless network to open or encrypted mode.
If you forget the set SSID password, please press the reset hole
with a ne-like object and press the power button for 3 seconds
simultaneously, and then the projector will reboot and restore to
default Setting.
Hibernation / Sleep Mode
You can switch on the hibernation mode to set the continuous projection time
for longer battery life. The hibernation times that can be set are 10 mins, 15
mins, and 20 mins.
Set the application (available only
in wireless connection)
![](/img.php?id=1917034&img=bg13.png)
18
Keystone Correction
You can use and to apply keystone correction to the projected screen
in order to adjust it to a proper shape for easy viewing.
About
You can use this option to nd out the current version and copyright
information of your iShow (wireless projector) app.
![](/img.php?id=1917034&img=bg14.png)
19
If your device supports HDMI output, you can use an HDMI cable to
connect your device to the KODAK iShow 1000 Pico Projector for
mirroring what is on your display regardless of any app running.
Using the HDMI cable specically designed for your device enables
you to use live streaming apps (such as YouTube ® , Facebook ®)
while running the KODAK iShow 1000 Pico Projector.
1. Start the projector.
2. Connect the KODAK iShow 1000 Pico Projector to your device using
the HDMI cable (not included) designed for your device. The image from
your device will then be displayed by the projector.
Limitations for iOS:
(1) iPad 1, iPhone 4 and below, iPod touch gen 4 and below,
support HDMI but can only view photos and video.
(2) iPad 2 and above, iPhone 4S and newer, support HDMI and
can view any le.
When using the HDMI projection, the KODAK iShow 1000's wireless
function is disabled.
When using the HDMI projection, the supporting resolution will be:
640x480P [60Hz (4:3)],
720x480P [60Hz (4:3)/60Hz (16:9)],
720x576P [50Hz (4:3)/50Hz (16:9)],
1280x720P [50Hz (16:9)/60Hz (16:9)],
1920x1080P [23.97Hz (16:9)/24Hz (16:9)/25Hz (16:9)/29.97Hz (16:9)/
30Hz (16:9)]
7Using HDMI for projection
![](/img.php?id=1917034&img=bg15.png)
20
8Firmware Update
When there is a new version of rmware, follow the following steps to update
the rmware of the projector:
1. Download the new rmware to the computer's hard drive.
2. Turn on the KODAK iShow 1000 Pico Projector and connect to the power
charger.
3. Use the wireless network to connect the computer containing the
rmware upgrade to the projector. Open a web browser, and enter
the IP (192.168.203.1) to access to the rmware update interface.
4. Operate according to the instructions on the update interface to update
the rmware of the projector.
Only rmware update via a computer is supported.
The web browser used must have the Javascript support function.
You may use the following web browsers for rmware update:
Firefox 12 and above
IE 8 and above
Google Chrome 18 and above
Opera 12 and above
Safari 5.1 for Windows and above
Safari for MAC OS X 6.0 and above
![](/img.php?id=1917034&img=bg16.png)
21
9
Projector
Type DLP
Focus Range
(diagonal) 5-50inches
Throw Distance Approx.16.5-165cm
Resolution 854×480 pixels
Image Brightness 35 Lumens
Contrast Ratio 500:1
Connector Power inlet, earphone jack, HDMI Type A
Speaker Mixed stereo output
Support wireless network Yes
Supported
projection
le
formats
Picture *.jpg, *.png; photo supports up to 24
mega-pixels
Video *.3gp, *.mp4, *.mov, *.m4v; supports up
to 1080p30
Document
Microsoft® Word® (*.doc, *.docx; Ofce
2003, 2007 and 2010)
Microsoft® PowerPoint® (*.ppt, *.pptx;
Ofce 2003, 2007 and 2010)
Microsoft® Excel® (*.xls, *.xlsx; Ofce
2003, 2007 and 2010)
Adobe PDF (*.pdf)
Specications
![](/img.php?id=1917034&img=bg17.png)
22
Supported operating systems Android 2.3.0 or higher, iOS 4.3.1 or
higher, Windows 7, Windows 8
Focus Control Manual
Power Built-in rechargeable Li-polymer battery
3.7V 2800mAh
Capability Up to 90 mins
Operation Environment Temperature: 32 ~ 95°F / 0 ~ 35°C,
Humidity: 10 ~ 80%
Storage Environment Temperature: 32 ~ 113°F / 0 ~ 45°C,
Humidity: 0 ~ 60%
Product Dimension Approx.125.0×60.0×22.5mm
Product Weight Approx.165g
![](/img.php?id=1917034&img=bg18.png)
Ver 1
The Kodak trademark and trade dress are used under license from Kodak.
© 2013 by JK Imaging Ltd. All rights reserved.
JK Imaging Ltd. 1411 W. 190th Street, Suite 550, Gardena, CA 90248, USA
www.kodakcamera.jkiltd.com