Sit La Precisa S p A 1584008 584 PROFLAME G Fire Remote Control Transmitter User Manual 9957033 tr 001

Sit La Precisa S.p.A. 584 PROFLAME G Fire Remote Control Transmitter 9957033 tr 001

Users Manual

9.957.033       002 584 PROFLAME G FIRE TRANSMITTERUSE AND INSTALLATION INSTRUCTIONSRead the instructions before use. This control must be installed in accordance with the rules in force.
The SIT 584 PROFLAME G Fire Transmitter is a device that allows, when used with the 584PROFLAME G Fire Receiver and in conjunction with the Combination Gas Control, to commandappliances like fireplaces and log sets. With the 584 PROFLAME G Fire Transmitter it is possible to turn the appliance on and off.The 584 PROFLAME G Fire Transmitter is the Remote Control that commands the Receiver. SeeFig. 1. Moving the side slider in the direction of the transmission light  it is also possible to disconnect theelectric supply of the internal batteries (child safety feature).English -422ENGLISHON /OFF KeySide sliderFig. 1: 584 PROFLAME G Fire TransmitterTransmission lightIMPORTANT The 584 PROFLAME G Fire Transmitter is integrating part of the 584 PROFLAME G System,which is composed of:•  584 PROFLAME G Fire Transmitter•  584 PROFLAME G Fire ReceiverThe 584 PROFLAME G Fire Transmitter is designed and realized to be used exclusively with the 584 PROFLAME G Fire Receiver.Please use this Installation Manual in conjunction with the 584 PROFLAME G Fire System, forcomplete installation instructions.
3Supply voltage 4.5 V (Three AAA batteries)Ambient temperature ratings 0 - 60 °C (32 - 140 °F)Radio frequency 315 MHzTECHNICAL DATACAUTIONProperty Damage Hazard.Excessive heat can cause property damageThe fireplace can stay ignited for many hours. Take care to turn off the fireplace if it isunattended by adult people.Do not leave the Remote Control where children can reach it.Check the functionality of theRemote ControlThe Remote Control is powered bythree AAA 1.5 V batteries in theproper compartment with the correctpolarity; see Fig. 2. The correctpower of the Remote Control can bechecked observing the presence ofthe red light when ON/OFF button ispressed; see Fig. 1.ENGLISHFig. 2THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1)   THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2)  THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDINGINTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTYRESPONSIBLE FOR COMPLIANCE COULD VOID THE USERS'S AUTHORITY TOOPERATE THE EQUIPMENT.
FCC NOTICEThis equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, this is no guarantee that interference will not occur in a particularinstallation.If this equipment does cause harmful interference to radio or television reception, which canbe determined by turning the equipment off and on, the user is encouraged to try to correctthe interference by one or more the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and Receiver.•Connect the equipment into an outlet on a circuit different from that to which the Receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.4ENGLISH

Navigation menu