Sivantos TV03 TV Adapter User Manual UserGuide EN

Download:
Mirror Download [FCC.gov]
Document ID	3374261
Application ID	FFpJ1rFAWdAEzSuyQLemgA==
Document Description	UserGuide_EN
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	125.76kB (1571968 bits)
Date Submitted	2017-04-28 00:00:00
Date Available	2017-06-12 00:00:00
Creation Date	2017-03-20 09:30:43
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2017-03-20 09:31:03
Document Title	UserGuide_EN
Document Creator	Adobe InDesign CC 2014 (Windows)

StreamLine TV
User Guide
Hearing
Systems

Content
Before you start  
Included in delivery  
Components  
Getting started  
Positioning  
Connecting to power supply  
Connecting to your electronic device  
Pairing hearing instruments  
10
10
11
13
20
Daily use  
Using the transmitter  
Power and TV indicator  

23
23
26
Important safety information  
Personal safety  
Product safety  
30
30
33
Important information  
Explanation of symbols  
Maintenance and care  
Troubleshooting  
Technical information  
Disposal information  
Conformance information  
36
36
39
41
46
48
48

Before you start
This device is intended as a wireless transmitter of
sound from a TV or from other electronic devices
to hearing instruments. It is intended to be used by
children (> 36 months) and adults together with their
hearing instruments.
CAUTION
Read this user guide thoroughly and completely and
follow the safety information in this document to avoid
damage or injury.

Compatible hearing instruments
StreamLine TV works with our specific wireless hearing
instruments. Your Hearing Care Professional will advise
you on the compatible models.

Included in delivery
➊ StreamLine TV
➋ USB power cable and power plug with
country‑specific adapter
➌ TOSLINK cable
➍ RCA (cinch) cable
➎ SCART adapter
➏ Mini jack adapter

➋
➏
Components
➊ TV indicator
➋ Power indicator
➌ Setup button
➍ Power connection
➎ RCA connections (left and right)
➏ TOSLINK connections (in and out)
➐ Mode button (only for Hearing Care Professionals)

➋
➌
Getting started
Positioning
Position the transmitter close to
your electronic device, so that
they can be easily connected
with cables. For best connection
to your hearing instruments,
position the transmitter
horizontally and in
direct line of sight with
your hearing instruments.
10
Connecting to power supply
Only use the USB power
cable and power plug that
came with the transmitter.
X Connect the micro USB
side of the power cable to
the power connection of
the transmitter ➊.
X Connect the power plug to
the power supply ➋.
11
X Observe the indicators
➌:
Description
‑
The transmitter is starting up.
If after a few seconds, both indicators flash
blue, the transmitter is on but not paired to
any hearing instrument. Refer to the section
"Pairing hearing instruments".
other
12
Refer to the section "Power and TV indicator".
Connecting to your electronic device
You can connect the transmitter to your electronic device
with the TOSLINK cable or with the RCA cable. We
recommend using the TOSLINK connection. Use the
supplied cables and adapters.
13
We recommend to connect either the TOSLINK input or the
RCA input of the transmitter.
If both inputs of the transmitter are used, the electronic
device that is connected via TOSLINK cable has the higher
priority and only the audio signal of this device will be
streamed to your hearing instruments.
14

TOSLINK connection
X Before connecting the cable, remove the protection caps
from the TOSLINK cable plugs.
X Plug the cable into the TOSLINK input of your transmitter
and into the TOSLINK (optical audio) output of your
electronic device.
To prevent the TOSLINK cable from breaking, do not
forcefully bend it.
15
Further information:
● Refer to the electronic device's manual: Set the
output format of the electronic device to either PCM
(pulse-code modulation) or Dolby® Digital*.
● The TOSLINK output of your transmitter may be used to
connect further TOSLINK devices such as external Dolby
decoders or surround sound systems.
* Dolby and the double‑D symbol are registered trademarks of Dolby Laboratories.
16

RCA connection
X Plug the cable into the RCA connections of your
transmitter.
X Plug the other side of the cable into the RCA output of
the electronic device. Or via adapter into the SCART or
mini jack output of the electronic device.
17
Further information:
● Without adapter: The RCA output of the electronic device
is typically marked "L‑R AUDIO OUT" and found on the
back or control panel.
● With SCART adapter: The audio signal can depend
on the source selected on the electronic device. For
example some TVs will only make TV sound available on
the SCART output, but not the sound from a connected
DVD player.
● With mini jack adapter: The mini jack output on the
electronic device is typically the headphone output.
The speakers of the electronic device may be muted
18

●
if the headphone output is used. So that sound is only
heard through the hearing instruments.
Refer to the electronic device's manual: Set the output
format of the electronic device to analog audio or
uncompressed audio.

19
Pairing hearing instruments
Your hearing instruments need to be paired once with the
transmitter. After that, the pairing is saved in the hearing
instruments and remembered each time they are turned on.
X Ensure that the transmitter is connected to the power
supply.
X Turn the hearing instruments off and on again:
Open and close the battery compartments.
If your hearing instruments do not have a battery
compartment, turn them off and on as described
in the hearing instruments' user guide.
20

X Place both hearing
instruments close
to, or on top of the
transmitter. The
pairing process starts
automatically.
X Observe the indicators:
Description
If pairing is completed, both indicators are blue
for about 30 seconds.
other
Refer to the section "Power and TV indicator".
21
Multiple users:
● This transmitter can be paired to multiple hearing
instruments. All users will be able to hear the same sound.
● To clear the pairings of one current user, first reset
the transmitter to factory settings. This will clear
the pairings of all users. After that, pair the hearing
instruments of the other users again. Refer to the section
"Resetting to factory settings".
22

Daily use
Using the transmitter
Function
Description
Start audio
streaming
Switch your hearing instruments to the
transmitter mode or change to the dedicated
hearing program.
Stop audio
streaming
Quit transmitter mode or switch to any other
hearing program in your hearing instruments.
Adjust
volume
Use the controls of your hearing instruments.

23
Further information:
● Depending on your hearing instruments' type and
configuration, you can change their mode or hearing
program with the hearing instruments' controls
(e. g. push button), or with a smartphone app, or
with a dedicated remote control. Refer to the hearing
instruments' user guide for details.
● Volume functions and hearing programs are optional
hearing instrument features. They depend on the type
of hearing instrument and can be programmed by your
Hearing Care Professional.
24

●
●
The volume of the streamed audio signal is normally
not affected by volume adjustments from the TV remote
control.
Your Hearing Care Professional can adjust the mix of the
audio streaming signal with surrounding sounds according
to your preference.

25
Power and TV indicator
Both power indicator
and TV indicator
current status of the transmitter.
show the
Description
‑
Power indicator is white:
The transmitter is starting up.
Both indicators flash blue:
Power is on. The transmitter is not paired to
any hearing instrument. Refer to the section
"Pairing hearing instruments".
26
Description
Both indicators are blue for 30 seconds:
Pairing is complete.
‑
Power indicator is red:
Power is on. The transmitter is not receiving
an audio signal. Refer to the section
"Troubleshooting".
Both indicators are green:
The transmitter is receiving an audio signal via
the RCA connection.
27
Description
Power indicator is green, TV indicator flashes
green:
The transmitter is not receiving an audio signal
via the RCA connection or the volume is
too low.
Power indicator is green, TV indicator is blue:
The transmitter has a valid TOSLINK
connection to your electronic device regardless
of whether an audio signal is played or not.
28
Description
Power indicator is green, TV indicator flashes
red:
The signal format is not supported. Refer to the
section "Connecting to your electronic device".
Both indicators flash red:
Error. Contact your Hearing Care Professional.
29
Important safety information
Personal safety
WARNING
Choking hazard!
Your device contains small parts which can be
swallowed.
X Keep hearing instruments, batteries and
accessories out of reach of children and mentally
disabled persons.
X If parts have been swallowed consult a physician or
hospital immediately.
30

WARNING
Risk of electrical shock!
X Do not use obviously damaged devices and return
them to point of sale.
WARNING
Note that any unauthorized changes to the product
may cause damage to the product or cause injury.
X Use only approved parts and accessories. Ask your
Hearing Care Professional for support.

31
WARNING
Risk of electric shock!
X Connect audio input only to a device conforming to
IEC 60065, the IEC-Norm for audio, video and other
electronic devices.
WARNING
This device may interfere with measuring and
electronic equipment.
X Do not use your device on airplanes or areas where
sensitive or life‑supporting electronic equipment is
used.
32

WARNING
Risk of explosion!
X Do not use your device in explosive atmospheres
(e. g. in mining areas).
Product safety
NOTICE
X Protect your devices from extreme heat. Do not
expose them to direct sunlight.
NOTICE
X Protect your devices from high humidity.

33
NOTICE
X Do not dry your devices in the microwave oven.
NOTICE
Different types of strong radiation, e. g. during X-ray
or MRI head examinations, may damage devices.
X Do not use the devices during these or similar
procedures.
Weaker radiation, e. g. from radio equipment or
airport security, does not damage the devices.
34

In some countries restrictions for the usage of wireless
equipment exist.
X Refer to local authorities for further information.
NOTICE
Your devices are designed to comply with international
standards on electromagnetic compatibility but
interference with nearby electronic devices could
occur. In this case, move away from the source of
interference.

35
Important information
Explanation of symbols
Symbols used in this document
Points out a situation that could lead to serious,
moderate, or minor injuries.
Indicates possible property damage.
Advice and tips on how to handle your device better.
36
Symbols on the device or packaging
CE compliance label, confirms compliance with
certain European Directives, refer to section
"Conformance information".
EMC and radio communications
compliance label Australia, refer to section
"Conformance information".
Indicates the legal manufacturer of the device.
Do not dispose of the device with general
domestic waste. Read more in section
"Disposal information".
37
Symbols on the device or packaging
Read and follow the instructions in the
user guide.
Manufactured under licence from
Dolby Laboratories.
38
Maintenance and care
NOTICE
X Do not put your device in water!
X Do not clean your device with alcohol
or benzine.
X Clean the device as necessary with a soft tissue.
X Avoid abrasive cleaning liquids with additives such as
citric acids, ammonia, etc.
39
Resetting to factory settings
To reset the transmitter to factory settings:
X Press and hold the setup button for more than 5 seconds.
All pairings are deleted. Both indicators flash blue.
40

Troubleshooting
If audio streaming is not working, check the following tables.
TOSLINK cable is connected
Troubleshooting
The signal format is not supported. Refer to the
section "Connecting to your electronic device".
No audio signal is available. For example, pause
or mute is pressed on the electronic device.
Your hearing instruments are out of operating
distance. Move closer to the transmitter.
41
Troubleshooting
Your hearing instruments have not been
paired with the transmitter, but other
hearing instruments are paired. Pair your
hearing instruments. Refer to the section
"Pairing hearing instruments".
42
‑
No audio signal is available. For example, pause
or mute is pressed on the electronic device.
‑
TOSLINK cable is defective. Check the cable
for damages and replace it if necessary.
RCA cable is connected
Troubleshooting
The output signal of the electronic device is
not loud enough. Increase the volume on the
electronic device.
No audio signal is available. For example, pause
or mute is pressed on the electronic device.
Your hearing instruments are out of operating
distance. Move closer to the transmitter.
43
Troubleshooting
Your hearing instruments have not been
paired with the transmitter, but other
hearing instruments are paired. Pair your
hearing instruments. Refer to the section
"Pairing hearing instruments".
The signal format is not supported. Refer to the
section "Connecting to your electronic device".
‑
44
The output signal of the electronic device is
not loud enough. Increase the volume on
the electronic device.
Troubleshooting
‑
No audio signal is available. For example, pause
or mute is pressed on the electronic device.
Both TOSLINK and RCA cable are connected
Unplug the cable that is currently not in use
(either TOSLINK or RCA cable).
●
45
Technical information
Operating, transport, and storage conditions
Operating conditions
Temperature
5 to 40 °C
Relative humidity
15 to 93 %, non‑condensing
Atmospheric pressure
700 to 1060 hPa
During extended periods of transport and storage, please
observe the following conditions:
46

Transport and Storage
Temperature
-25 to 70 °C
Relative humidity
15 to 93 %, non‑condensing
For other parts, such as hearing instruments, other
conditions may apply.
Technical data of the power supply
Input voltage:
100-240 V AC
Input current:
max. 0.2 A at 100 V AC
Input frequency:
47-63 Hz
Output voltage:
5 V DC
Output current:
max. 1 A

47
Disposal information
Recycle devices, accessories and packaging according to
local regulations.
Conformance information
The CE mark indicates conformity with the following
European directives: 93/42/EEC concerning medical devices,
99/5/EC (R&TTE) concerning radio and telecommunications
terminal equipment, and 2011/65/EU RoHS concerning the
restriction of hazardous substances.
The full text of the declaration of conformity can be obtained
from www.signia-hearing.com/doc.
48

Wireless functionality
This device contains a wireless transmitter using 2.4 GHz
technology. The emission power from this device is
max. 17.1 dBm EIRP. This device complies with international
standards concerning electromagnetic compatibility and
human exposure.
FCC and ISED compliance information can be found on
the back of the device.
indicates conformity
The ACMA compliance mark
with the electromagnetic interference standards set by the
Australian Communications and Media Authority (ACMA).
Devices with the FCC marking comply with the standards of
the FCC regarding electromagnetic interference.

49
This Class B digital apparatus complies with Canadian
ICES‑003.
This device complies with Part 15 of the FCC Rules and with
ISED's licence-exempt RSSs.
Operation is subject to the following two conditions:
● This device may not cause harmful interference, and
● this device must accept any interference received,
including interference that may cause undesired
operation.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
50

residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and
receiver.

51
●
●
Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
FCC caution: Any changes or modifications not expressly
approved by the party responsible for compliance could void
the user's authority to operate this equipment.
To comply with FCC RF exposure requirements, the device
and the antenna for this device must be installed to ensure
a minimum separation distance of 20 cm or more from a
person's body. Other operating configurations should be
avoided.
52

53
54
Legal Manufacturer
Signia GmbH
Henri-Dunant-Strasse 100
91058 Erlangen
Germany
Phone +49 9131 308 0
Document No. 03132-99T01-7600 EN
Order/Item No. 109 463 23
Master Rev02, 03.2017
© Signia GmbH, 03.2017
www.signia-hearing.com


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c014 79.156797, 2014/08/20-09:53:02
Create Date                     : 2017:03:20 09:30:43+01:00
Metadata Date                   : 2017:03:20 09:31:03+01:00
Modify Date                     : 2017:03:20 09:31:03+01:00
Creator Tool                    : Adobe InDesign CC 2014 (Windows)
Instance ID                     : uuid:3f2b1503-c2e4-4537-9ee2-78e4f3cf5bbe
Original Document ID            : xmp.did:986ce86f-0838-c548-b883-3d13f0dbabdc
Document ID                     : xmp.id:a59371e2-6ce4-1c41-ad71-a3e816ef466e
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:b5fed56c-6e9b-1249-880f-3c134cbaa035
Derived From Document ID        : xmp.did:924a1ddd-2d02-5544-9854-79bbc2e27d4e
Derived From Original Document ID: xmp.did:986ce86f-0838-c548-b883-3d13f0dbabdc
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2014 (Windows)
History Changed                 : /
History When                    : 2017:03:20 09:30:43+01:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
Page Count                      : 56
Creator                         : Adobe InDesign CC 2014 (Windows)

EXIF Metadata provided by EXIF.tools