Sivantos WL700 easyPocket remote control 3.28 MHz User Manual UserManual

Download:
Mirror Download [FCC.gov]
Document ID	1893854
Application ID	xaVZj3+a9PbKHsWizNOUkw==
Document Description	UserManual.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	167.51kB (2093844 bits)
Date Submitted	2013-02-05 00:00:00
Date Available	2013-04-01 00:00:00
Creation Date	2013-01-21 11:38:28
Producing Software	Adobe PDF Library 9.9
Document Lastmod	2013-01-30 14:07:51
Document Title	UserManual.pdf
Document Creator	Adobe InDesign CS5.5 (7.5)

DRA
FT 2
013
-01
-21
easyPocket basic
easyPocket advanced
User Guide
www.siemens.com/hearing
Life sounds brilliant.
Content
Your remote control
Overview
Display
Control buttons
Key lock switch
Programming connection
10
10
Batteries
Inserting batteries
Checking the battery status
11
11
13
Daily use
Adjusting the volume
Changing the hearing program
Turning on and off (mute)
Adjusting the tinnitus noiser level
14
14
14
16
18
Alarm clock
Setting the alarm clock
Ending the alarm
Turning the alarm clock off
19
19
21
22
Setup and service functions
Setting the time
Resetting volume and hearing program
Displaying contact data
Setting the language of the menu
23
23
25
26
26
Content
DRAFT 2013-01-21
Maintenance and care
27
Troubleshooting
28
Important information
Intended use
Explanation of symbols
Transport and storage conditions
Disposal information
Technical information
Conformance information
29
29
29
29
30
30
32
Important safety information
Personal safety
Product safety
33
33
35
Country-specific information
37
DRAFT 2013-01-21
Content
Your remote control
Your hearing instruments are equipped with wireless
technology and can therefore be controlled by a remote
control.
Both easyPocket basic and easyPocket advanced provide the same basic remote control functions for listening
and program change.
easyPocket advanced has additional comfort functions.
The operating distance of the remote control is approximately 40 inches (1 meter).
u Make sure the distance between your remote control
and hearing instrument does not exceed the operating
distance.
CAUTION
Read this user guide thoroughly and completely
and follow the safety information in this document
to avoid damage or injury.
Your remote control
DRAFT 2013-01-21
Overview
ૠ
➊ Display
➍ Control buttons
➋ Key lock switch
➎ Program change button
➌ Programming con- ➏ Volume up/down buttons
nection
More functions are available in the menu. To enter
or exit the menu, press the volume up button and
the volume down button simultaneously.
DRAFT 2013-01-21
Your remote control
Display
All actions initiated with the remote control are immediately reflected on the display. For
example, if you press the volume up
button, the following icon is shortly
displayed.
The remote control does not receive
information from your hearing instruments. All actions that you initiate with
the controls of your hearing instruments are not reflected
on the remote control’s display.
Display of easyPocket basic
૟
૞
➊ Indicates change of
hearing program and
volume
➋ Alarm clock is activated
Your remote control
➌ Batteries of the remote
control are low
➍ Function of control
buttons
DRAFT 2013-01-21
Display of easyPocket advanced
➊ Indicates change
of volume
➋ Program name
➌ Program icon
➍ Program number
➎ Alarm clock is activated
➏ Batteries of the remote control are low
➐ Function of programmable
control buttons
Power save mode
If the remote control is not used for some time, the display automatically turns black. The remote control is then
in its power save mode.
u Press any button to activate the display again.
DRAFT 2013-01-21
Your remote control
Control buttons
You can quickly access two
functions with the control
buttons on the right hand side
of the remote control.
The control buttons of the
easyPocket advanced can be
configured by your Hearing
Care Professional. Small icons
on the display show the functions.
Basic functions
Turn hearing instruments on or off.
Reset to default volume and hearing program.
Your remote control
DRAFT 2013-01-21
Advanced functions (for easyPocket advanced only)
Tinnitus noiser level up.
Tinnitus noiser level down.
Adjust treble.
Adjust bass.
All other icons:
Shortcut to select a preferred hearing program.
The available icons and hearing programs depend on your
personal setup.
DRAFT 2013-01-21
Your remote control
Key lock switch
u To prevent any accidental operation while the
remote control is in pockets or bags, move the
key lock switch to lock position (red color visible).
When the key lock is active, all buttons
on the remote control are disabled. The
following icon is displayed.
Programming connection
This connection is only to be
used by your Hearing Care
Professional for programming the remote control.
10
Your remote control
DRAFT 2013-01-21
Batteries
The remote control uses two AAA batteries.
Inserting batteries
u Slide the battery compartment cover in
the direction of the arrow.
u Insert the batteries.
Make sure the "+" symbols on the battery and compartment are aligned.
DRAFT 2013-01-21
Batteries
11
u Attach the cover by
sliding it onto the
remote control.
The current time setting is displayed. If you want to
change it, refer to section "Setting the time".
12
Batteries
DRAFT 2013-01-21
Checking the battery status
When the batteries of the remote
control are low, this is indicated in
the status bar.
Additionally, you can check the battery status at any time in the menu.
u To enter the menu, press the volume up button and
the volume down button simultaneously.
u Navigate to the menu entry Info by pressing the vol-
ume up button or the volume down button.
u Confirm your selection by pressing the program
change button.
The battery status is displayed:
battery full
battery empty
u To return to the standard display, press the program
change button.
Remove empty batteries immediately and dispose of them
according to local regulations.
DRAFT 2013-01-21
Batteries
13
Daily use
Adjusting the volume
If you are wearing two hearing instruments, the volume
will be adjusted on both instruments at the same time.
u Press the volume up button or the volume down but-
ton to adjust the volume by one step.
Changing the hearing program
If you are wearing two hearing instruments, the hearing program will be changed on both instruments. The
procedure for changing the hearing program differs for
easyPocket basic and easyPocket advanced.
easyPocket basic
u Press the program change button to switch to the next
hearing program.
14
Daily use
DRAFT 2013-01-21
easyPocket advanced
u Press the program change button repeatedly until the
icon of the desired hearing program is displayed.
or
u Press the control button next to the
icon indicating the desired hearing
program.
The control buttons have to be
configured by your Hearing Care
Professional.
DRAFT 2013-01-21
Daily use
15
Turning on and off (mute)
You have several options to turn your hearing instruments on and off with your remote
control. Both hearing instruments are
simultaneously turned on or off.
When you turn your hearing instruments off via remote control, the following icon is displayed. It is displayed
until you turn your hearing instruments
back on.
Additionally, all buttons are disabled. The only available
function is to turn the hearing instruments back on.
After turning on, the previously used volume and hearing
program are set.
Via control button
u Press the control button next to the following
icon to turn your hearing instruments on or off.
The control buttons have to be configured by
your Hearing Care Professional.
16
Daily use
DRAFT 2013-01-21
Via menu
Turning off:
u To enter the menu, press the volume up button and
the volume down button simultaneously.
u Navigate to the menu entry HI Mute / Unmute by
pressing the volume up button or the volume down
button.
u Confirm your selection by pressing the program
change button.
Turning on:
u Press any button to activate the display.
u Wait until the information about the turned off hearing
instruments disappears.
The menu is displayed and the HI Mute / Unmute
entry is still selected.
u To turn your hearing instruments back on, confirm the
selection by pressing the program change button.
DRAFT 2013-01-21
Daily use
17
Adjusting the tinnitus noiser level
This function is only available if your Hearing Care
Professional has configured the tinnitus
noiser for both your hearing instruments and for the control buttons of
the remote control.
You can recognize the setting, if the
corresponding icons are displayed next
to the control buttons.
u To adjust the noiser level, press the upper or the lower
control button.
18
Daily use
DRAFT 2013-01-21
Alarm clock
You can set an alarm clock reminding you at the same
time every day by a repeating signal tone and by an alarm
clock icon.
The alarm is initiated by the remote control but the
acoustic signal is emitted by your hearing instruments.
u Turn on your hearing instruments.
u Keep your hearing instruments within the
remote control’s operating distance.
Otherwise you will not be able to hear the alarm.
Setting the alarm clock
u To enter the menu, press the volume up button and
the volume down button simultaneously.
u Navigate to the menu entry Alarm by pressing the
volume up button or the volume down button.
u Confirm your selection by pressing
the program change button.
The entry field for hours is highlighted.
u Set the hours by pressing the vol-
ume up button or the volume down
button.
DRAFT 2013-01-21
Alarm clock
19
u Confirm your setting by pressing the
program change button.
The entry field for minutes is highlighted.
u Set the minutes by pressing the vol-
ume up button or the volume down
button.
u Confirm your setting by pressing the
program change button.
The alarm on/off selection field is
highlighted.
u Press the volume up button or the
volume down button to position
the cursor next to alarm clock on:
u Confirm your selection by pressing the program
change button.
When the alarm clock is turned on,
this is indicated in the status bar.
20
Alarm clock
DRAFT 2013-01-21
Ending the alarm
When the alarm clock rings, a corresponding icon is displayed on the
remote control.
If you do not end the alarm, it is
repeated within the next minutes.
u To end the alarm, press the program change button.
The alarm clock will ring at the same time on the next
day.
DRAFT 2013-01-21
Alarm clock
21
Turning the alarm clock off
u To enter the menu, press the volume up button and
the volume down button simultaneously.
u Navigate to the menu entry Alarm by pressing the
volume up button or the volume down button.
u Confirm your selection by pressing
the program change button.
The entry field for hours is highlighted.
u Press the program change button
twice to skip the entry fields for
hours and minutes.
The alarm on/off selection field is
highlighted.
u Press the volume up button or the
volume down button to position
the cursor next to alarm clock off:
u Confirm your selection by pressing the program
change button.
22
Alarm clock
DRAFT 2013-01-21
Setup and service functions
Setting the time
u To enter the menu, press the volume up button and
the volume down button simultaneously.
u Navigate to the menu entry Clock by pressing the
volume up button or the volume down button.
u Confirm your selection by pressing the program
change button.
The entry field for hours is highlighted.
u Set the hours by pressing the vol-
ume up button or the volume down
button.
u Confirm your setting by pressing the
program change button.
The entry field for minutes is highlighted.
u Set the minutes by pressing the volume up button or
the volume down button.
u Save the settings by pressing the program change but-
ton.
The time is displayed.
DRAFT 2013-01-21
Setup and service functions
23
The time is always displayed in the header of the menu.
To enter or exit the menu, press the
volume up button and the volume down button simultaneously.
24
Setup and service functions
DRAFT 2013-01-21
Resetting volume and hearing program
If you have made changes to volume or program and do
not know why the hearing instruments are acting the way
they are, you can manually set the default volume and
hearing program for your hearing instruments.
u To enter the menu, press the volume up button and
the volume down button simultaneously.
u Navigate to the menu entry HI Restore by pressing the
volume up button or the volume down button.
u Confirm your selection by pressing
the program change button.
The hearing instruments are reset
and a corresponding icon is displayed.
u You can also reset the hearing instru-
ments by pressing the control button next
to the following icon.
The control buttons have to be configured
by your Hearing Care Professional.
DRAFT 2013-01-21
Setup and service functions
25
Displaying contact data
If your Hearing Care Professional has saved his or her
contact data on the remote control, you can view this
information:
u To enter the menu, press the volume up button and
the volume down button simultaneously.
u Navigate to the menu entry Contact by pressing the
volume up button or the volume down button.
u Confirm your selection by pressing
the program change button.
The contact data is displayed.
u To return to the standard display, press the program
change button.
Setting the language of the menu
u Ask your Hearing Care Professional.
26
Setup and service functions
DRAFT 2013-01-21
Maintenance and care
NOTICE
u Do not put your remote control in
water!
u Do not clean your remote control
with alcohol or benzine.
u Clean the remote control as necessary with a soft cloth
and use a nonabrasive household soap.
u Avoid abrasive cleaning liquids with additives such as
citric acid, ammonia, etc.
DRAFT 2013-01-21
Maintenance and care
27
Troubleshooting
Problem and possible solutions
The remote control does not work.
■ Check, if the key lock is activated. Deactivate it, if
necessary.
■ Change the batteries.
Another remote control affects your hearing instruments.
■ Return remote control and hearing instruments to
your Hearing Care Professional. Your Hearing Care
Professional can change the wireless address to
avoid interference.
Consult your Hearing Care Professional if you encounter
further problems.
28
Troubleshooting
DRAFT 2013-01-21
Important information
Intended use
The remote control is intended to operate hearing instruments.
Use the remote control only as described in this
user guide.
Explanation of symbols
Points out a situation that could lead to serious, moderate, or minor injuries.
Indicates possible property damage.
Advice and tips on how to handle your device better.
Read and follow the instructions in the user guide.
Transport and storage conditions
During extended periods of transport and storage, please
observe the following conditions:
Storage
Transport
Temperature
10 to 40 °C
-20 to 60 °C
Relative humidity
10 to 80 %
5 to 90 %
Air pressure
700 to 1050 hPa
200 to 1200 hPa
For other parts, such as batteries, other conditions may
apply.
DRAFT 2013-01-21
Important information
29
Disposal information
Within the European Union, the marked equipment is
covered by "Directive 2002/96/EC of the European
Parliament and of the Council of 27 January 2003
on waste electrical and electronic equipment."
Amended by "Directive 2003/108/EC" (WEEE).
NOTICE
u Recycle hearing instruments, accessories and
packaging according to national regulations.
NOTICE
u To avoid environmental pollution, do not throw
batteries into household trash.
u Recycle or dispose of batteries according to
national regulations or return them to your
Hearing Care Professional.
Technical information
Siemens easyPocket
FCC: SGI-WL700
IC: 267AB-WL700
Operating frequencies: Fc=3.28 MHz
Maximum field strength @ 10m: -7 dBμA/m
Maximum field strength @ 30m: 28.5 dBμV/m
30
Important information
DRAFT 2013-01-21
FCC and IC compliance information can be found inside
the battery compartment.
N14203 (EMC and radio communications compliance
label Australia)
This Class B digital apparatus complies with Canadian
ICES‑003.
Changes or modifications made to this equipment not
expressly approved by Siemens Audiologische Technik GmbH for compliance may void the FCC authorization
to operate this equipment.
FCC compliance
This device complies with Part 15 of the FCC Rules and
with RSS‑210 of Industry Canada.
Operation is subject to the following conditions:
■ this device may not cause harmful interference, and
■ this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not
DRAFT 2013-01-21
Important information
31
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
■ Reorient or relocate the receiving antenna.
■ Increase the separation between the equipment and
receiver.
■ Connect the equipment to an outlet on a circuit differ-
ent from that to which the receiver is connected.
■ Consult the dealer or an experienced radio/TV techni-
cian for help.
Conformance information
With the CE marking Siemens confirms compliance with the European Directive 93/42/EEC
concerning medical devices and the European
Directive 99/5/EC (R&TTE) concerning radio and
telecommunications terminal equipment.
32
Important information
DRAFT 2013-01-21
Important safety information
Personal safety
WARNING
Choking hazard!
Your device contains small parts which can be
swallowed.
u Keep hearing instruments, batteries and acces-
sories out of reach of children and mentally
disabled persons.
u If parts have been swallowed consult a physi-
cian or hospital immediately.
WARNING
Wireless systems may interfere with measuring
devices and electronic equipment.
u Do not use your device in hospitals or airplanes.
DRAFT 2013-01-21
Important safety information
33
WARNING
Risk of interference with active implants or life
support systems!
If you wear a pacemaker:
u Carry the remote control at a safe distance of
about 12 inches (30 cm) away from the pacemaker.
u Do not carry the remote control:
- in your breast pocket,
- with a lanyard around your neck,
- or directly on the skin over the active implant.
For all other active implants or life support systems:
u Prior to use, have the electromagnetic compat-
ibility verified.
WARNING
Risk of explosion!
u Do not use your remote control in explosive
atmospheres (e. g. in mining areas).
34
Important safety information
DRAFT 2013-01-21
Radiofrequency radiation exposure Information
The radiated output power of the device is far
below the FCC radio frequency exposure limits.
Nevertheless, the device shall be used in such a
manner that the potential for human contact during normal operation is minimized.
Product safety
NOTICE
u Protect your devices from extreme heat. Do not
expose them to direct sunlight.
NOTICE
u Protect your devices from high humidity.
NOTICE
u Do not dry your devices in the microwave oven.
NOTICE
Different types of strong radiation, e. g. during
X-ray or MRI head examinations, may damage
devices.
u Do not use the devices during these or similar
procedures.
Weaker radiation, e. g. from radio equipment or
airport security, does not damage the devices.
DRAFT 2013-01-21
Important safety information
35
In some countries restrictions for the usage of
wireless equipment exist.
u Refer to local authorities for further informa-
tion.
NOTICE
Your hearing instruments are designed to comply
with international standards on electromagnetic
compatibility but interference with nearby electronic devices could occur. In this case, move away
from the source of interference.
NOTICE
For instruments with wireless connectivity:
When the telecoil program is active, the remote
control may cause a pulsing noise.
u Use the remote control with a distance greater
than 10 cm (4 inches).
NOTICE
u Your remote control is programmed to exclu-
sively communicate with your hearing instruments. If you experience problems with another
person's remote control, consult your Hearing
Care Professional.
36
Important safety information
DRAFT 2013-01-21
Country-specific information
DRAFT 2013-01-21
Country-specific informatio
37
Siemens Audiologische Technik GmbH
Gebbertstrasse 125
91058 Erlangen
Germany
Phone +49 9131 308 0
DRA
FT 2
013
-01
-21
Document No. A91SAT-0####-99T##-#### ##
Order/Item No. ### ### ## | Master Rev##, ##.2012 · ##
Printed in Germany | © Siemens AG, ##.2012
www.siemens.com /hearing

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2013:01:21 11:38:28+01:00
Creator                         : Adobe InDesign CS5.5 (7.5)
Modify Date                     : 2013:01:30 14:07:51+01:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2013:01:30 14:07:51+01:00
Creator Tool                    : Adobe InDesign CS5.5 (7.5)
Page Image Page Number          : 1
Page Image Format               : JPEG
Page Image Width                : 256
Page Image Height               : 256
Page Image                      : (Binary data 8020 bytes, use -b option to extract)
Instance ID                     : uuid:ccd005bf-d58a-4921-8ff6-5471175a0fbb
Document ID                     : xmp.did:865E4A4FB063E21196C5BA6DC9383AAC
Original Document ID            : xmp.did:865E4A4FB063E21196C5BA6DC9383AAC
Rendition Class                 : proof:pdf
History Action                  : created, saved, saved, saved
History Instance ID             : xmp.iid:865E4A4FB063E21196C5BA6DC9383AAC, xmp.iid:5DF7FAB8B563E21196C5BA6DC9383AAC, xmp.iid:5EF7FAB8B563E21196C5BA6DC9383AAC, xmp.iid:DB1F79A0B663E21196C5BA6DC9383AAC
History When                    : 2013:01:21 11:31:20+01:00, 2013:01:21 11:31:31+01:00, 2013:01:21 11:31:31+01:00, 2013:01:21 11:38+01:00
History Software Agent          : Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5
History Changed                 : /;/metadata, /metadata, /;/metadata
Doc Change Count                : 35
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.9
Trapped                         : False
Page Count                      : 38

EXIF Metadata provided by EXIF.tools