Skidata AS450SA00 Parking column using RFID User Manual Parking Columns unlimited
Skidata AG Parking column using RFID Parking Columns unlimited
Skidata >
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 441802 |
| Application ID | eiv/jj19Fug/jvaBnh1EzQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 160.87kB (2010930 bits) |
| Date Submitted | 2004-06-18 00:00:00 |
| Date Available | 2004-06-18 00:00:00 |
| Creation Date | 2004-06-18 12:51:57 |
| Producing Software | Acrobat Distiller 6.0 (Windows) |
| Document Lastmod | 2004-06-18 12:51:57 |
| Document Title | Parking Columns unlimited |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | bebe |
Parking Columns unlimited Manual and operational description Parking Column AS 450 PA00 Parking Column AS 450 PA00-E Parking Column AS 450 PA00-GC Parking Column AS 450 PE00 Parking Column AS 450 PE00-E Parking Column AS 450 PE00-GC Parking Column AS 450 SA00 BLL Parking Column AS 450 PA00-US Parking Column AS 450 PA00-E-US Parking Column AS 450 PA00-GC-US Parking Column AS 450 PE00-US Parking Column PE00-E-US Parking Column PE00-GC-US Parking Column SA00 BLL-US Manual and operational description Version April 2004 Parking Columns unlimited SKIDATA AG Technical Documentation Untersbergstrasse 40 A-5083 Gartenau Telephone +43 6246 888-0, Telefax +43 6246 888-7 Internet http://www.skidata.com e-mail docu@skidata.com Copyright © 2004 by SKIDATA AG. All rights reserved. All information in the following document is protected by copyright law. No part of this document may be reproduced without the written consent of SKIDATA AG. SKIDATA AG reserves the right to make any changes of specification and other information in this document without further notice. Please note During the compilation of this Technical Documentation, great care has been taken to ensure the accuracy of the information contained in it. However, despite our constant effort to ensure the highest degree of accuracy and comprehensiveness possible, the information provided cannot be guaranteed to be absolutely error-free. Trademarks This documentation may contain representations of registered product or service trademarks owned by SKIDATA AG or third parties, as well as references to proprietary know-how protected by copyright laws or other legal provisions. In any case the intellectual property rights remain exclusively with their respective owners. Declaration of Conformity The Parking Columns unlimited except the model versions where the name ends with the characters “-US” have been developed, designed and manufactured in accordance with the following EU directive: R&TTE (99/5/EC) 0408 Page 2 © SKIDATA AG, April 2004 Manual and operational description Parking Columns unlimited Important : The FCC-specific notes apply only to the model version “AS 450 SA00 BLL-US” FC C1 5.1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FC C1 5.21 IMP TANT : Any changes to or modifications of the AS 450 SA00 BLL-US unless expressly approved by SKIDATA AG, may void the user's authority to operate this device. Note: The model versions - AS 450 PA00-US - AS 450 PA00-E-US - AS 450 PA00-GC-US - AS 450 PE00-US - AS 450 PA00-E-US - AS 450 PE00-GC-US contain the modular transmitter with the FCC-ID “QSS-MECH450”. © SKIDATA AG, April 2004 Page 3 Manual and operational description Parking Columns unlimited Parking Columns unlimited Document Management – Version Table Tab. 1: Document Version Table for Installation & Maintenance Instructions Section Document Pages Version 29 2.1 Page 4 Parking Columns unlimited Date 2004-04-24 © SKIDATA AG, April 2004 1 Parking Column unlimited Parking Column unlimited Version 2.1 29 pages Copyright 2004 by SKIDATA AG 1 1.1 Parking Column unlimited Contents 1.1 Contents 1.1 Contents 1.2 1.2.1 1.2.1.1 System APT 450 – Columns unlimited Versions of Parking Column Unlimited Parking column unlimited – “Standard” (AS 450 PA00, AS 450 PE00, AS 450 PA00-US, AS 450 PE00-US) 3 Parking column unlimited – “Extended” (AS 450 PA00E, AS 450 PE00-E, AS 450 PA00-US, AS 450 PE00US) Parking column unlimited – “Graphic” (AS 450 PA00GC, AS 450 PE00-GC, AS 450 PA00-GC-US, AS 450 PE00-GC-US) Parking column unlimited – “handsfree” (AS 450 SA00- BLL, AS 450 SA00 BLL-US) Installation of Parking column unlimited Warning Preparation for Installation Installation Installation on non-level surfaces (applies only in exceptional circumstances) Power supply 10 Note 10 Stripping connection wires 12 Cross-sectional area of cable leads 13 Power supply 13 Connection terminals for control lead and intercom 15 Loop Connections, Standard-Version, GraphicsVersion, Handsfree-Version 18 Loop connections, Extended-Version 19 Earthing connection 20 Changing the fuse 21 Surge protection for external devices 21 Weather protection 22 MANUAL OPEN/CLOSE switch 23 Installing devices in the front panel 24 Opening the front panel 25 Closing the Parking Column 25 Installing and Deinstalling the Coding Unit (except Handsfree-Version and OEMVersion) 27 1.2.1.2 1.2.1.3 1.2.1.4 1.2.2 1.2.2.1 1.2.2.2 1.2.2.3 1.2.2.4 1.2.3 1.2.3.1 1.2.3.2 1.2.3.3 1.2.3.4 1.2.3.5 1.2.3.6 1.2.3.7 1.2.3.8 1.2.3.9 1.2.3.10 1.2.4 1.2.5 1.2.6 1.2.7 1.2.8 1.2.9 Page 2 © SKIDATA AG, Version 2.1 1 Parking Column unlimited System APT 450 – Columns unlimited 1.2 1.2 System APT 450 – Columns unlimited 1.2.1 Versions of Parking Column Unlimited 1.2.1.1 Parking column unlimited – “Standard” (AS 450 PA00, AS 450 PE00, AS 450 PA00US, AS 450 PE00-US) Fig. 1: Parking Column unlimited – “Standard” © SKIDATA AG, Version 2.1 Page 3 1 1.2 Parking Column unlimited System APT 450 – Columns unlimited 1.2.1.2 Parking column unlimited – “Extended” (AS 450 PA00-E, AS 450 PE00-E, AS 450 PA00-US, AS 450 PE00-US) Fig. 2: Parking Column unlimited - ”Extended” Page 4 © SKIDATA AG, Version 2.1 1 Parking Column unlimited System APT 450 – Columns unlimited 1.2.1.3 1.2 Parking column unlimited – “Graphic” (AS 450 PA00-GC, AS 450 PE00-GC, AS 450 PA00-GC-US, AS 450 PE00-GC-US) Fig. 3: Parking Column unlimited ”Graphic” © SKIDATA AG, Version 2.1 Page 5 1 1.2 Parking Column unlimited System APT 450 – Columns unlimited 1.2.1.4 Parking column unlimited – “handsfree” (AS 450 SA00- BLL, AS 450 SA00 BLL-US) Fig. 4: Parking Column unlimited ”handsfree” Page 6 © SKIDATA AG, Version 2.1 1 Parking Column unlimited 1.2 System APT 450 – Columns unlimited 1.2.2 Installation of Parking column unlimited 1.2.2.1 Warning General Warning: PCBs are sensitive to electrostatic discharge and should be handled with great care to avoid damage to the circuitry. Avoid touching the boards unnecessarily. Before mounting the column, check the entire device for possible transport damage. Before accessing electronical or mechanical parts, the entire deviced must be disconnected from the mains. 1.2.2.2 Preparation for Installation Ensure the following before proceeding with the installation: The concrete foundation must be exactly horizontal. Installing the device on an uneven surface may cause the chassis to become warped or damaged. If levelling of the surface is not possible, the parking column must be level-adjusted, e.g. by using additional hexagon nuts; in that case the threaded rods must be allowed to protrude further. The surface of the concrete foundation must be even and exactly horizontal Cable protection tubes should be cut approx. 2 cm above the concrete surface 1.2.2.3 Installation The threaded rods should protrude approx. 50 mm from the concrete surface The fastening tension of the hexagon nuts must not exceed 20 Nm Use washers with large outer diameter (∅ = 30 mm, as per UN 737 standard) The parking column must be aligned exactly horizontally © SKIDATA AG, Version 2.1 Page 7 1 1.2 Parking Column unlimited System APT 450 – Columns unlimited Fig. 5: Column installation Page 8 © SKIDATA AG, Version 2.1 1 Parking Column unlimited 1.2 System APT 450 – Columns unlimited 1.2.2.4 Installation on non-level surfaces (applies only in exceptional circumstances) Fig. 6: Hexagon nuts as spacers All three No. 2 washers must be absolutely level (use a spirit level if necessary). Important: Avoid drilling dust from getting into the device during installation, as electrostatically charged dust may cause damage to the electronic assemblies inside the column. © SKIDATA AG, Version 2.1 Page 9 1 1.2 Parking Column unlimited System APT 450 – Columns unlimited 1.2.3 Power supply 1.2.3.1 Note Important notes: Electric installation and maintenance work may be carried out only by appropriately qualified, licensed electrical technicians. Mains connections must be hardwired. Please ensure full compliance with all applicable national and international rules and regulations concerning electric connections, and all applicable safety regulations. When all electric lines are properly connected, replace and fasten the cover Page 10 © SKIDATA AG, Version 2.1 1 Parking Column unlimited 1.2 System APT 450 – Columns unlimited Fig. 7: Column interior: Mounting plate configuration Ensure the following before proceeding with electrical connections: Check for proper mains supply voltage (120 or 230 VAC); see type label Mains connections must comply with national standards and directives When using flexible stranded wires, all filaments must be placed inside the terminal clamps (use wire-end sleeves, if necessary) © SKIDATA AG, Version 2.1 Page 11 1 1.2 Parking Column unlimited System APT 450 – Columns unlimited The mains supply line must be fused in accordance with ap- plicable regulations (6 A fuse recommended) Check the isolation resistance of the cables to make sure it exceeds 0,5 MΩ Fix cables to mounting plate by way of tension relieve tongues and cable ties Check the network cables to ensure the proper loop impedance Important: Always make sure that the device is completely disconnected from the mains while fitting electric wiring. 1.2.3.2 Stripping connection wires To avoid danger of short circuit with wires or chassis parts, wires should not be stripped by more than 6 mm (recommended value). Uninsulated wire sections must be inserted completely into the connection terminals. When attaching connecting wires, the insulation should cover the wire up to the point where it connects to the terminal. Fig. 8: Correct connector wiring Page 12 © SKIDATA AG, Version 2.1 1 Parking Column unlimited 1.2 System APT 450 – Columns unlimited 1.2.3.3 Cross-sectional area of cable leads Tab. 1: Cable leads – Technical characteristics wires Max. torque at terminals Rigid Solid Flexible Twisted 0,22 – 0,25 Nm 0,14 – 1,5 mm² 0,14 – 1,5 mm² ** 0,5 – 0,6 Nm 0,20 – 2,5 mm² 0,20 – 2,5 mm² *** 0,22 – 0,25 mm² 0,14 – 1,5 mm² 0,14 – 1,0 mm² 1.2.3.4 Power supply Fig. 9: Power supply on sd591 ** see Section 1.2.3.3 © SKIDATA AG, Version 2.1 Page 13 1 1.2 Parking Column unlimited System APT 450 – Columns unlimited Caution: The OUT terminal on connection control board sd591 is not fused and cannot be deactivated by way of the on-board mains switch. Note: Electrical leads and wires must comply wirth applicable national guidelines concerning – mechanical stress – tension resistance – cross-sectional area with respect to voltage drop – current carrying capacity and short-circuit rating To install electrical fittings, you must first remove the cover of control board sd591 Page 14 © SKIDATA AG, Version 2.1 1 Parking Column unlimited System APT 450 – Columns unlimited 1.2.3.5 1.2 Connection terminals for control lead and intercom Fig. 10: Connection terminals for control lead and intercom * see Section 1.2.3.3 © SKIDATA AG, Version 2.1 Page 15 1 1.2 Parking Column unlimited System APT 450 – Columns unlimited Fig. 11:Connections on control board sd582 *** siehe 1.2.3.3 Page 16 © SKIDATA AG, Version 2.1 1 Parking Column unlimited System APT 450 – Columns unlimited 1.2 Fig. 12: sd582 – I/O circuit connections Note on wire twisting: When connecting Arcnet and loop cables, make sure that the wires are twisted up to the connection terminal (approx. 5 twists per 10 cm). Shield connections must be as short as possible and insulated against contact with the chassis wall by means of a protective tube. © SKIDATA AG, Version 2.1 Page 17 1 1.2 Parking Column unlimited System APT 450 – Columns unlimited 1.2.3.6 Loop Connections, Standard-Version, Graphics-Version, Handsfree-Version Fig. 13: Loop connections, StandardVersion, Graphics-Version, Handsfree-Version) Page 18 © SKIDATA AG, Version 2.1 1 Parking Column unlimited System APT 450 – Columns unlimited 1.2.3.7 1.2 Loop connections, Extended-Version Fig. 14: Loop connections, Extended-Version) © SKIDATA AG, Version 2.1 Page 19 1 Parking Column unlimited 1.2 System APT 450 – Columns unlimited 1.2.3.8 Earthing connection The protective earth conductor of the lead must be attached to the central earthing point by way of a ring lug (see connection layout in Fig. 9). Fig. 15: Earthing point Fig. 16: Protective earth conductor After installation, ensure proper metal contact of all aluminium parts, i.e. the cable lug and/or metal part (check by measuring) If necessary, mill off any aluminium parts at the contact point to ensure proper conductivity (the resistance of the earth conductor must not exceed 0,1 ȍ) After connecting the earth conductor, proceed as follows: Check the strain relief clamps for proper fit Check to make sure the cables leading to the connection ter- minals are properly placed in accordance with applicable norms Page 20 © SKIDATA AG, Version 2.1 1 Parking Column unlimited 1.2 System APT 450 – Columns unlimited Perform a visual check of the insulation to ensure it is in proper condition Slightly tug at the wires to check whether the terminal screws are fastened properly Chek to ensure the connectors are plugged in properly Reattach the cover of sd591 Perform a visual check and manual inspection of the earthing connection Check to make sure that none of the wires are strained Note: If the Parking Column is powered up at temperatures below 2 °C, the control assembly will not start up to prevent possible damage. In that case, the built-in temperature control system will activate the heater (make sure that all doors are closed to allow for the device to warm up as quickly as possible). 1.2.3.9 Changing the fuse Important Note: A blown fuse indicates a device defect that requires the attention of a trained service technician. The fuse must be replaced by a new one of the same type and technical characteristics (see below). Before replacing the fuse, the lead in the power distributor must be deactivated (i.e., disconnected from the mains). Fuse characteristics: 120 VAC = 5 A–T 230 VAC = 2,5 A–T Model: Type: Time lag: High breaking capacity: Ceramic tube Schurter SPT 5x20 1.2.3.10 Surge protection for external devices In case additional devices (e.g., relays, controls, etc) are installed inside the chassis (on the top-hat rail) any relay contacts and coil connections must be protected against transient voltage by means of appropriate components (e.g., diodes, RC elements, varistors, etc). © SKIDATA AG, Version 2.1 Page 21 1 1.2 Parking Column unlimited System APT 450 – Columns unlimited 1.2.4 Weather protection Important: Opening the device while it is exposed to rain or snowfall may cause damage to the components inside. To avoid moisture damage when performing installation work, you can protect the open device against moisture by means of an umbrella (see illustration below). Before opening the device during or shortly after a rain or snow shower, use a cloth to wipe down the top cover and upper edge of the front panel to avoid moisture getting inside the device. Fig. 17: Using an umbrella for moisture protection when performing maintenance work Page 22 © SKIDATA AG, Version 2.1 1 Parking Column unlimited System APT 450 – Columns unlimited 1.2 Fig. 18: Column top – Detail: umbrella holding frame 1.2.5 MANUAL OPEN/CLOSE switch Fig. 19: OPEN/CLOSE switch on sd591 Switch positions Position 0: Normal operation Position 1: Keep CLOSED Position 2: Keep OPEN Single gate passage Briefly set the switch to position 2; after the barrier opens, set it back to the 0 position © SKIDATA AG, Version 2.1 Page 23 1 1.2 Parking Column unlimited System APT 450 – Columns unlimited If no vehicle passes through the gate, the barrier will close automatically after approximately ten seconds 1.2.6 Installing devices in the front panel Fig. 20: Installing devices in the front panel Important: Devices and cables intended for subsequent installation must bear a CE label (EU countries) or UL/CSA label (USA; Canada) and must comply with all national and international standards and guidelines. Installation of such components may only be performed by qualified electricians. Page 24 © SKIDATA AG, Version 2.1 1 Parking Column unlimited System APT 450 – Columns unlimited 1.2 CAUTION: When installing devices in the front panel, ensure a minimum clearance of 5 cm above the fan-heater (see illustration). The fan-heater must never be covered to avoid the danger of fire. To avoid damage to the device, make sure that the fastening screws of the mounting plate are not screwed in too tightly (max. torque 0,5 Nm). When cutting out the metal plate, make sure it is not warped, as this may cause water to leak into the device. After installing the desired device(s), check the chassis for tightness against water and snow. 1.2.7 Opening the front panel To open the front panel, open the column door and pull the locking lever on the inside of the chassis wall forward (see illustration). Fig. 21: Opening the front panel 1.2.8 Closing the Parking Column Close the top cover and the front panel After locking the column door, slide the dust cover back over the lock (see Fig. 1) © SKIDATA AG, Version 2.1 Page 25 1 1.2 Parking Column unlimited System APT 450 – Columns unlimited Important: If the front panel is not closed tightly, water or snow may get inside the device, causing damage to the electronic assemblies. After closing the front panel, pull at it slightly to make sure it is properly closed and locked shut. Fig. 22: Closing the column top section Page 26 © SKIDATA AG, Version 2.1 1 Parking Column unlimited System APT 450 – Columns unlimited 1.2.9 1.2 Installing and Deinstalling the Coding Unit (except Handsfree-Version and OEMVersion) To be able to access the Coding Unit for maintenance purposes, you must first open the front panel (see illustration). Fig. 23: Parking Column unlimited – Coding Unit The device is secured to the draw-out support plate by means of four mounting pegs (indicated by arrows in the illustration below). Fig. 24: Coding Unit mounting pegs (Bottom view) © SKIDATA AG, Version 2.1 Page 27 1 1.2 Parking Column unlimited System APT 450 – Columns unlimited Deinstallation Before you dismount the coding unit, it is essential that you unplug all cables and disconnect the Column from the power supply Using your thumb to give you leverage, detach the front panel of the Coding Unit from the support plate (see illustration below) and lift it out of its anchoring (note that you will need to overcome a resistance to do so) Fig. 25: Lifting the front section of the Coding Unit Next, hold the Coding Unit by the ticket slot, raise it out of its rear anchoring (again overcoming a slight resistance) and lift it off the support plate Page 28 © SKIDATA AG, Version 2.1 1 Parking Column unlimited 1.2 System APT 450 – Columns unlimited Fig. 26: Deinstalling and installing the Coding Unit Installation To reinstall the Coding Unit, hold it by the ticket slot, place it on the rear pegs and press it down until it locks into place Next, place the front panel of the Coding Unit on the two front pegs and press it down until it also locks into place (in doing so, place your hand against the support plate to avoid it getting warped) When re-installing the coding unit, use one hand to apply counter-pressure to the mounting plate from below as you press down the coder into place with your other hand. This is to prevent the mounting plate from warping as a result of the downward pressure being applied during the installation. Finally, push the support plate back in as far as it will go Wear protection After locking the column door, remember to slide the dust cover over the lock to prevent dust and dirt from getting inside © SKIDATA AG, Version 2.1 Page 29
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 33 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:b25539e5-a0f8-4623-a46e-8a54c1ba3b37 Producer : Acrobat Distiller 6.0 (Windows) Create Date : 2004:06:18 12:51:57+02:00 Modify Date : 2004:06:18 12:51:57+02:00 Metadata Date : 2004:05:25 15:53:02+02:00 Creator Tool : PScript5.dll Version 5.2 Document ID : uuid:37616a16-9b20-49aa-872c-adf71f0d7427 Format : application/pdf Creator : bebe Title : Parking Columns unlimited Description : Parking Columns unlimited Author : bebe Subject : Parking Columns unlimited Keywords : Parking, Columns, unlimitedEXIF Metadata provided by EXIF.tools