Skidata SD705 Inductive Tag Reader Module User Manual sd705

Skidata AG Inductive Tag Reader Module sd705

Users Manual

Download: Skidata SD705 Inductive Tag Reader Module User Manual sd705
Mirror Download [FCC.gov]Skidata SD705 Inductive Tag Reader Module User Manual sd705
Document ID684432
Application IDfb4HAV+K50gA6RhFUtAU7Q==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize46.09kB (576085 bits)
Date Submitted2006-07-21 00:00:00
Date Available2006-07-21 00:00:00
Creation Date2006-03-02 08:50:04
Producing SoftwareAcrobat Distiller 5.0.5 (Windows)
Document Lastmod2006-06-27 11:45:48
Document Titlesd705
Document CreatorPScript5.dll Version 5.2
Document Author: SKIDATA AG

sd705
V 1.0
Manual
Manual
Version June 2006
sd705
SKIDATA AG
Technical Documentation
Untersbergstrasse 40
A-5083 Grödig/Salzburg
Telephone
+43 6246 888-0
Telefax
+43 6246 888-7
Internet
http://www.skidata.com
e-mail
docu@skidata.com
Copyright
© 2006 by SKIDATA AG. All rights reserved. All information in the
following document is protected by copyright law. No part of this
document may be reproduced without the written consent of SKIDATA AG. SKIDATA AG reserves the right to make any changes
of specification and other information in this document without
further notice.
Please note
During the compilation of this Technical Documentation, great
care has been taken to ensure the accuracy of the information
contained in it. However, despite our constant effort to ensure the
highest degree of accuracy and comprehensiveness possible,
the information provided cannot be guaranteed to be absolutely
error-free.
Trademarks
This documentation may contain representations of registered
product or service trademarks owned by SKIDATA AG or third
parties, as well as references to proprietary know-how protected
by copyright laws or other legal provisions. In any case the intellectual property rights remain exclusively with their respective
owners.
Declaration of Conformity
The sd705 has been developed, designed and manufactured in
accordance with the following EU directive:
R&TTE (1999/5/EC)
0408
Page 2
© SKIDATA AG, June 2006
Manual
Sd705
FCC 15.21:
IMPORTANT: Any changes to or modifications of de sd705, including antenna, unless expressly approved by SKIDATA™, may
void the user’s authority to operate this device.
The final product should contain labelling according to FCC requirements.
For example:
This device complies with Part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. This device contains FCC ID QSS-SD705.
This label will be placed on the final product, clearly visible to all
persons exposed to the transmitter.
Canada:
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired
operation of the device.
Document Management – Version Table
Tab. 1: Document Version Table for Installation & Maintenance Instructions
Section Document
Pages
Version
Date
1.0
2006-06-27
sd705
© SKIDATA AG, June 2006
Page 3
Manual
Page 4
sd705
© SKIDATA AG, June 2006
sd705
sd705
Version 1.0
5 pages
Copyright 2006 by SKIDATA AG
1
1.1
Page 2
sd705
Contents
1.1
Contents
1.1
Contents
1.2
General
1.3
1.3.1
1.3.2
sd705
front view
rear view
© SKIDATA AG, Version 1.0
sd705
1.2
General
1.2
General
The sd705 is a Radio Transceiver Module (RFID module) which
is designed for installation in SKIDATA devices by SKIDATA AG
only.
The module is not to be sold as an individual product.
The sd705 must be connected to the appropriate devices by
means of the plug-in connector provided for this purpose. The illustrations show the plug-in boards for 5 V DC power supply and
the data transfer line, as well as the plug-in parts for the
antennas. It is prohibited to use antennas other as the antennas
certified to be used with the sd705.
© SKIDATA AG, Version 1.0
Page 3
1
sd705
1.3
sd705
1.3
sd705
1.3.1
front view
Fig. 1: front view sd705
125 kHz Ant2
13 Mhz Ant2
125 kHz Ant1
13 Mhz Ant1
Power / Rs232
1.3.2
rear view
Power / RS232 (0 V / 5 V)
Fig. 2: rear view sd705
Page 4
© SKIDATA AG, Version 1.0

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2006:03:02 08:50:04Z
Modify Date                     : 2006:06:27 11:45:48+03:00
Page Count                      : 8
Creation Date                   : 2006:03:02 08:50:04Z
Mod Date                        : 2006:06:27 11:45:48+03:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : SKIDATA AG
Metadata Date                   : 2006:06:27 11:45:48+03:00
Creator                         : SKIDATA AG
Title                           : sd705
Has XFA                         : No
EXIF Metadata provided by EXIF.tools
FCC ID Filing: QSS-SD705

Navigation menu