Skylink Technologies ATOM2 Garage Door Opener User Manual MK3 QUICK GUIDE EN Draft X2 outline

Download:
Mirror Download [FCC.gov]
Document ID	3808884
Application ID	QmGc/wocA0Luu2v+xsoC8Q==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	60.4kB (755049 bits)
Date Submitted	2018-04-08 00:00:00
Date Available	2018-04-08 00:00:00
Creation Date	2018-04-03 10:11:11
Producing Software	Adobe PDF library 10.01
Document Lastmod	2018-04-06 11:26:53
Document Title	MK3_QUICK-GUIDE_EN_Draft_X2_outline
Document Creator	Adobe Illustrator CS6 (Windows)
Document Author:	Joe

1. Press the [Set] button for one second,
and release the button when the blue
LED flashes slowly.
Within 30 seconds, press any button
on the remote that you would like to
program to the opener.
3. Once the button on the remote is
programmed. The blue LED will off
indicating the programming successfully.
1. Press the [Set] button for 15 seconds,
when the blue LED flashes quickly.
Release the [Set] button.
2. Press the [Set] button again to confirm
erase all the programmed remotes.
3. The blue LED stays off and emit one
beep indicating the erasing
successfully.
1. Re-connect the wires of the
safety beam sensor to the Atoms
opener. Push in tab with a flat head
screwdriver and insert the wires.
1. Wall Console
Push the button to open/close the garage
door opener.
2. Re-connect the wires of the wall
console to the Atoms opener. Push
in tab with a flat head screwdriver
and insert the wires.
2. Remote
To open/close the opener with remote control,
press the button that is programmed to the
opener.
1. Connect the opener to an approved
power source. The green LED stays
on.
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and (2) This device must accept any interference
received, including interference that may cause undesired operation.
SET
Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Green
LED
2. Press and hold [Set] button for 5
seconds until the blue LED stays on,
red LED flashes quickly. Release the
[SET] button.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
4. Press the [Set] button to confirm the
door position.
SET
3. Press the [ ] button until the
door is in fully open position.
Red Blue
LED LED
5. The blue LED stays on, red LED
flashes slowly.
6. Press the [ ] button until the
door is in fully closed position.
8. The blue and red LED stay on.
The light will flash 3 times when the
travel limit settings are completed.
Remarque :
Cet équipement a été testé et déclaré conforme aux restrictions prévues dans le cadre de la classe B des
appareils numériques, définies par la section 15 du règlement de la FCC. Ces restrictions visent à garantir
une protection suffisante contre les interférences nuisibles dans une installation à domicile. Cet appareil
outilise et émet de l'énergie de fréquences radio, et s’il n’est pas installé et employé conformément aux
consignes, il peut provoquer des interférences nuisibles aux communications radio.
SET
11. The light will flash 3 times again.
Red Blue
LED LED
12. Press the Wall button again to close
the garage door to its fully closed
position.
Réorientez ou déplacez l'antenne de réception.
Augmentez la distance entre l'appareil et le récepteur.
Branchez l'appareil sur un circuit électrique différent de celui où le récepteur est branché.
Consultez le fournisseur ou un technicien radio/télévision expérimenté pour obtenir de l’aide.
IC
Il n'existe toutefois aucune garantie que de telles interférences ne se produiront pas dans une installation
particulière. Si cet appareil occasionne des interférences nuisibles aux réceptions radio ou télévisuelles,
ce qui peut être déterminé en mettant l'appareil en arrêt et en marche, l’utilisateur peut corriger cette
interférence de l'une des façons suivantes :
•
•
•
•
SET
Ce dispositif est conforme à la partie 15 des règlements de la FCC. Son fonctionnement est soumis aux
deux conditions suivantes : 1) Il ne doit pas produire d’interférences nuisibles, et 2) II doit accepter toute
interférence reçue, même si celle-ci est susceptible de compromettre son fonctionnement.
Tout changement ou modification, non expressément approuvé par la partie responsable de
la conformité, peut annuler l'autorisation de l'utilisateur à utiliser cet appareil.
Red Blue
LED LED
10. The blue and red LED flash slowly.
http://www.skylinkhome.com US OFFICE
17 Sheard Avenue, Brampton,
Ontario, Canadá L6Y 1J3
E-mail: support@skylinkhome.com
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
AVERTISSEMENT :
9. Press the Wall button to open the
garage door to its fully open position.
CANADA OFFICE
FCC
SET
7. Press the [Set] button again to confirm.
13. The blue and red LED will turn off. And
emit one beep indicating the
programming successfully.
Warning:
1180-D East Francis Street,
Ontario, CA 91761, USA
© 2018 SKYLINK GROUP
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation
of the device.
Le présent appareil est conforme aux Partie 15 des règlements de la FCC et CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
2. Program a Remote:

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Author                          : Joe
Create Date                     : 2018:04:03 10:11:11+08:00
Modify Date                     : 2018:04:06 11:26:53+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Metadata Date                   : 2018:04:06 11:26:53+08:00
Thumbnail Width                 : 184
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 22719 bytes, use -b option to extract)
Producer                        : Adobe PDF library 10.01
Format                          : application/pdf
Creator                         : Joe
Title                           : MK3_QUICK-GUIDE_EN_Draft_X2_outline
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : True
Max Page Size W                 : 215.900000
Max Page Size H                 : 279.400000
Max Page Size Unit              : Millimeters
Font Name                       : Arial-Black, ArialNarrow, ArialMT, Arial-BoldMT, HelveticaNeueLTStd-HvCn, HelveticaNeueLTStd-Cn
Font Family                     : Arial, Arial, Arial, Arial, Helvetica Neue LT Std, Helvetica Neue LT Std
Font Face                       : Black, Narrow, Regular, Bold, 87 Heavy Condensed, 57 Condensed
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type
Font Version                    : Version 5.22, Version 2.40, Version 6.98, Version 6.98, OTF 1.029;PS 001.000;Core 1.0.33;makeotf.lib1.4.1585, OTF 1.029;PS 001.000;Core 1.0.33;makeotf.lib1.4.1585
Font Composite                  : False, False, False, False, False, False
Font File Name                  : ariblk.ttf, ARIALN_1.TTF, arial.ttf, arialbd.ttf, HelveticaNeueLTStd-HvCn_0.otf, HelveticaNeueLTStd-Cn_0.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Group Name               : Default Swatch Group
Swatch Group Type               : 0
Rendition Class                 : proof:pdf
Document ID                     : xmp.did:78B8F447E436E811A6D58AA1ACAC6817
Instance ID                     : uuid:2b2f5795-0d8e-394d-8432-58b3010d4aeb
Original Document ID            : uuid:76af73d6-61f3-4362-a262-1b09e1430897
Derived From Instance ID        : uuid:fbb48eb3-6d5c-408e-b4fb-b39bc9afc63f
Derived From Document ID        : xmp.did:6EBBFF93190AE81188D79BD8796675B5
Derived From Original Document ID: uuid:76af73d6-61f3-4362-a262-1b09e1430897
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:6DBBFF93190AE81188D79BD8796675B5, xmp.iid:78B8F447E436E811A6D58AA1ACAC6817
History When                    : 2018:02:05 10:09:20+08:00, 2018:04:03 10:11:12+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows)
History Changed                 : /, /
Page Count                      : 1
For                             : Joe,
Bounding Box                    : 46 4 598 785
Container Version               : 9
Creator Version                 : 16
Image Height                    : 781
Image Width                     : 552
Image Size                      : 552x781
Megapixels                      : 0.431

EXIF Metadata provided by EXIF.tools