Skyrocket Toys 01526RX24G Sky Viper Streaming Drone User Manual SV StreamingDrone IS 061115 F1
Skyrocket Toys LLC Sky Viper Streaming Drone SV StreamingDrone IS 061115 F1
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2662700 |
| Application ID | QItztbMOYMWxSAj4ySW/fw== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 131.85kB (1648180 bits) |
| Date Submitted | 2015-06-30 00:00:00 |
| Date Available | 2015-06-30 00:00:00 |
| Creation Date | 2015-06-28 21:49:31 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2015-06-28 22:36:04 |
| Document Title | SV_StreamingDrone_IS_061115_F1 |
| Document Creator | Adobe Illustrator CS5.1 |
| Document Author: | Daria |
Art Release for Production (Mechanical)
Sky Instructions Domestic
File Name: SV_StreamingDrone_IS.ai
Revision:
Licensor Approval Date:
Production Release Date: 06/11/15
Production Artist: JJ Hwang
Colors: Pantone 294
Trim Size:
Notes:
TROUBLESHOOTING
PROBLEM
Drone is unresponsive or
behaving erratically
SOLUTION
t Drone may be miscalibrated by launching from an unlevel
STREAMING
surface. Turn the remote off and unplug Droneâs battery for
30 seconds then turn them back on and try again from a
flat, level launching surface.
Ensure your remote is within unobstructed view of Drone and
you are within 30 feet range.
Ensure the remote has fresh batteries and the LiPo battery
is fully charged.
Inspect Drone for any possible damage. Turn the remote off
and unplug Droneâs battery for 30 seconds then turn them
back on and try again from a flat, level launching surface.
All blades spin, but Drone
will not fly properly
t Droneâs blades may have been installed incorrectly. Reinstall
Drone drifts in any
direction during flight
without direction from the
remote
t Adjust the trim controls until drifting ceases, see page 7.
Drone crashes
immediately
t Propellers may be installed in the wrong position. Ensure
Drone crashes when
attempting stunt functions
t Ensure that Drone is flying a minimum distance of 9 feet
12
STR VIDEO
Download the Sky Viper
Video Viewer app at
DRONE
INSTRUCTION GUIDE
CONTENTS
Remote
Control
and remember that the Green blades point forward.
Battery door includes
security screw to prevent
child access to LiPo battery.
Users over 14 years of age
may remove screw from
door for easier access.
Screws
RC Streaming Drone
Screwdriver
Device Holder
LiPo BATTERY
proper installation.
from the ground with a minimum 9 feet clearance in all
directions.
Stunt button does not
work
t Be sure to detatch the camera unit from the Drone.
Drone flight is erratic when
Flight Sensitivity is set to 3
t Ensure blade guards and camera module are removed to
Rechargeable 3.7v
650mAH LiPo Battery
USB Charging Cable
4 Replacement Blades
Remove all packaging attachments before giving the toy to a child.
Not suitable for children under 3 years due to small parts that could be swallowed.
Conforms to product safety standards ASTM F963.
Keep instructions for future reference. Do not discard.
â˘
reduce performance inhibiting weight.
www.skyrockettoys.com/products/sky-viper
#skyviper
This device complies with PART 15 of the FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Customer Service :
888-674-5650
CAUTION: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the userâs authority to operate the equipment.
â˘
Š2015 Skyrocket Toys LLC, Los Angeles, CA 90066 USA. All Rights Reserved.
Sky Viper is a registered tradmark and the Skyrocket logo are trademarks of Skyrocket Toys LLC.
MADE IN CHINA.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or
relocate the receiving antenna - Increase the separation between the equipment and receiver - Connect the equipment into an outlet on
a circuit different from that to which the receiver is connected - Consult the dealer or an experienced radio/TV technician for help.
1A
SIZE: 297 x 210mm (folds to 148.5 x 210mm)
BACK COVER / FRONT COVER
ADULT SUPERVISION REQUIRED
CHANGING DAMAGED PROPELLERS
Before each use, an adult should check this product and the LiPo battery to ensure no damage or
hazards exist. Drone has rotating blades that move at high speed, posing danger of damage and
injury. Pilots are responsible for any actions that result in damage or injury from the improper
operation of Drone. Adequate flying space is required. Avoid flying near interior fans and/or vents as
they may make flying difficult to control. Keep a safe distance away from streets, public thoroughfares
and power lines. Never attempt to retrieve Drone from any location higher than your reach (such as
rooftops or trees) or from any location that poses a safety hazard. Never fly Drone at night. Keep
Drone in sight at all times during operation. Discontinue operation immediately if Drone flies out of
your field of view. Do not fly near spectators or animals. Pets can become excited about R/C vehicles
therefore keep away from pets at all times. Keep spinning rotors away from fingers, hair, eyes and
other body parts. Always launch from a flat surface. Never leave Drone unattended while it is turned
on. Read all enclosed information before operating.
LiPo batteries have a severe risk of fire and injury if they are improperly handled or misused. They may explode,
overheat or ignite. Read all following precautions and instructions regarding the care and use of LiPo batteries.
The enclosed LiPo battery is only to be used with the vehicle and charger included with this product.
t Keep away from flammable materials.
t Do not expose to direct sunlight.
t Do not place in fires or leave in hot places.
t Do not drop or make subject to strong impact.
t Keep dry and away from water.
t Remove exhausted batteries as soon as possible and discard properly.
t Remove all batteries from the compartment if toy is not used for a long period.
t The supply terminals are not to be short circuited.
t Never throw batteries in a fire or attempt to open outer casing.
LiPo Battery Disposal: LiPo batteries must be recycled or disposed of properly. They should not be disposed
of with other household waste. Check your local laws and regulations for correct recycling and/or battery disposal.
ALKALINE BATTERY CAUTIONS
t Do not use rechargeable batteries.
t Non-rechargeable batteries are not to be recharged.
t Different types of batteries or new and old batteries are not to be mixed.
t Batteries are to be inserted using correct polarity.
t Remove exhausted batteries as soon as possible and discard properly.
t Remove all batteries from compartment if toy is not used for a long period.
t The supply terminals are not to be short-circuited.
t Never throw batteries in a fire or attempt to open the outer casing.
WARNING: Batteries are harmful if swallowed. Please keep away from children.
Battery Disposal: Dispose of batteries according to the local laws and regulations of your region. Some batteries
may be recycled, and may be accepted for disposal at your local recycling center. If you are not able to identify the
applicable rules in your area, please check the instructions of the battery manufacturer.
Unplug LiPo battery on Drone.
GREEN
BLADES
Make note of the blade color and letter (A or
B) before removing the blade from Drone.
(Markings are located on the underside of
blades and Drone).
FRONT
BACK
Remove the small screw using the mini
screwdriver provided.
Replace the damaged blade with a new
blade with matching color and letter.
Secure the blade with the retaining screw.
GREY
BLADES
Bottom View of Drone
WARNING: Do not fly with broken or
damaged propeller blades as it may
cause damage or lead to injury.
MAINTENANCE
Over time, loose hair or carpet fibers may get wound in blades, reducing performance.
Unplug Drone and remove fibers from motors. (Remove blades if necessary)
This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada . Son fonctionnement est soumis aux deux
conditions suivantes :
( 1 ) Ce dispositif ne peut causer d'interfĂŠrences ; et
( 2 ) Ce dispositif doit accepter toute interfĂŠrence , y compris les interfĂŠrences qui peuvent causer un mauvais
fonctionnement de l'appareil.
The distance between user and products should be no less than 20cm
La distance entre l'utilisateur et de produits ne devrait pas ĂŞtre infĂŠrieure Ă 20cm
1B
SIZE: 297 x 210mm (folds to 148.5 x 210mm)
PAGE 1 / PAGE 10
10
ONE TOUCH STUNTS
BLADE GUARDS FOR BEGINNERS
IMPORTANT
REMOVE THE CAMERA UNIT FROM THE DRONE BEFORE PERFORMING STUNTS. STUNT
FUNCTIONS WILL NOT WORK WITH CAMERA UNIT ATTATCHED. ALSO REMOVE BLADE
GUARDS WHEN FLYING IN ADVANCED SENSITIVITY MODE 3.
Blade guards are great for beginning pilots and can
be easily installed if desired. The guards however add
undesired weight and reduce flight performance.
Blade guards are optional and should NOT be used
with Advanced Flight Sensitivity setting 3.
BARREL ROLLS
While flying forward (or reverse), press the
STUNT BUTTON.
NOTE: Once a stunt has been initiated,
DO NOT adjust Throttle or press any other
controls until the stunt has been completed.
REAR BARREL ROLL
Plug the red male connector from the LiPo battery into the black
female connector end of the USB charging cord.
Plug the USB end of the charging cord into a USB power
source and charge battery until full.
GREEN LIGHT = FULLY CHARGED
Bring the Drone to a mid air hover without flying in any
direction. Remove finger from the DIRECTION STICK
While HOVERING, press and hold the STUNT BUTTON.
While still holding the STUNT BUTTON, tap the DIRECTION
STICK in the direction you want to the drone to flip.
Disconnect the LiPo battery connectors hanging out from the
back of the drone.
RED LIGHT = CHARGING
FLIPS
CHARGING, INSTALLING & CARING FOR
LIPO BATTERY IN THE DRONE
FRONT BARREL ROLL
Insert the posts of the blade guards into
the holes of the drone.
Secure the blade guards with the retaining screws.
RIGHT FLIP
FRONT FLIP
CAUTION!
Drone should be flying at least 9 feet in the air with a minimum clearance of 9 feet
in all directions before attempting stunt functions.
STUNT FUNCTIONS SHOULD BE PERFORMED OUTSIDE ONLY.
Once fully charged, disconnect the charing cord from
battery and power source. (Always unplug from power
source when not in use).
IMPORTANT:
LiPo battery can be removed from Drone by loosening
battery compartment screw, opening door and removing
the battery. When replacing the battery, be careful not
to pinch battery connector wires when closing the door.
Also ensure that wires protrude through open slots on
the sides of the battery door as shown. Make sure there
is sufficient wire slack for easily connecting and
disconnecting plugs, but not so much slack that wires
interfere with spinning blades.
CHARGING PRECAUTIONS:
After use, allow LiPo battery to cool down to room temperature before charging again.
t Charge LiPo battery in an isolated area, away from excessive heat or moisture.
t If LiPo battery swells, unplug it immediately and permanently discontinue use.
t Do not modify, heat, or wet the battery in any way. Only recharge with provided charger.
2A
SIZE: 297 x 210mm (folds to 148.5 x 210mm)
PAGE 9 / PAGE 2
WARNING!
IF AT ANY TIME DURING CHARGING OR USE THE BATTERY BECOMES DAMAGED IN ANY WAY,
DISCONTINUE CHARGING OR USE OF THE BATTERY IMMEDIATELY.
Continuing to charge or discharge a battery that has been damaged can result in a fire.
Quickly and safely disconnect the Drone from charging and place away from flammable
materials. Observe the battery for at least 30 minutes to be certain no additional swelling
or rupture occurs. Completely discharge the battery by submerging it in a saltwater
solution (1/2 cup salt per gallon of water) for 24 hours.
Check your local laws and regulations for correct recycling and/or battery disposal.
WHEN NOT IN USE:
t Always UNPLUG the Droneâs LiPo battery when not
in use or when Drone is being stored or transported.
t Store the LiPo battery and Drone in a dry area at
room temperature.
t Avoid temperatures less than 40°F/4°C and greater
than 120°F/49°C.
t Do not leave the LiPo battery in a car or exposed to
direct sunlight. If exposed to temperatures greater
than 120°F/49°C, the LiPo battery can be damaged
or may catch fire.
STREAM LIVE VIDEO TO YOUR
SMART DEVICE
Sky Viper Streaming Drone is equipped with WiFi connectivity, so you can view streaming video on
your smart device.
DOWNLOADING THE APP
iOS
Android
Go to the App Store and search for Sky
Viper Video Viewer app. Then, click install.
Go to the Google Play Store and search for Sky
Viper Video Viewer app. Then, click download.
CONNECTING TO THE STREAMING DRONE WITH YOUR DEVICE
LiPo BATTERY
1 Go to Wi-Fi setting on your smart device.
2 Select SKYVIPER_XXXXXX and connect.
Open the Sky Viper app on your device.
4 The App will bring up your Droneâs ID.
Follow the on-screen icons to interact with your Drone.
ATTACHING YOUR DEVICE TO THE REMOTE
INSTALLING REMOTE BATTERIES
Loosen screw in the Remote Control battery
compartment door with Philips screw driver and
insert batteries as shown. Replace door and
tighten screw.
â
4x
â
1.5 V
AAA (LR03)
1.5 V
AAA (LR03)
1.5 V
AAA (LR03)
1.5 V
AAA (LR03)
â
â
+ AAA/LR03/R03 1.5V â
Install the DEVICE HOLDER to remote.
Pull the DEVICE HOLDER arm.
Insert a smart device (Devices larger than 3.1/8âwide can be used, can not be attached
to remote).
Follow app directions for streaming, recording and video playback.
â AAA/LR06/R03 1.5V +
+ AAA/LR03/R03 1.5V â
â AAA/LR03/R03 1.5V +
360Ë PANORAMIC VIEW ROTATION
AUTO SHUTDOWN:
t If battery voltage drops to an extremely low level, Drone will automatically shutdown.
The Video Drone will need to be recharged to restore flying power.
t If anything prevents Droneâs blades from spinning or they become jammed, Drone will
automatically shutdown. The LiPo battery will need to be unplugged, then reconnected to
restore flying power.
1 While HOVERING, press and hold the STUNT
BUTTON.
to start drone rotation.
3 Press the RECORD BUTTON on your
smart device to start recording. Press again to
stop recording.
2B
2 Move the DIRECTION STICK (Right or left)
7 SEC
SIZE: 297 x 210mm (folds to 148.5 x 210mm)
PAGE 3 / PAGE 8
TRIM ADJUSTMENTS
FLIGHT SENSITIVITY ADJUSTMENT
If Drone drifts in any direction while hovering (and you are not pressing the Direction stick),
you may need to make trim adjustments. Safely land Drone on a level surface. Press the
recommended Trim button once as described below. Launch the Drone back into the air and
attempt another still hover. If Drone continues to drift, repeat the process until a still
hover is achieved:
t Drone spins counter-clockwise,
t Drone drifts forward
t Drone drifts to the left
when viewed from the top
â Press the B button
â Press the R button
â Press the
button
t Drone drifts backward
t Drone drifts to the right
t Drone spins clockwise, when
â Press the F button
â Press the L button
viewed from the top
â Press the
button
Drone responsiveness may be adjusted on the
Controller to match your flying skills.
There are three choices:
NOTE: THE REMOTE WILL BEEP/FLASH 3 TIMES WHEN TRIM ADJUSTMENT
IS SET TO THE NEUTRAL POSITION (THE MIDDLE OF THE TRIM RANGE) AND
BEEP ONCE WHEN IT HAS REACHED THE END OF ITâS RANGE.
FLYING TIPS
When launching the Drone, face the same direction as the Drone. Green blades should be in front.
Practice launching, hovering and landing before attempting to learn other moves.
Flying 2 to 3 feet above the ground will reduce ground turbulence and make flying easier.
When first attempting to fly in different directions, start by tapping the Direction stick until you have a
feel for it. Always move the controls slowly until you become comfortable operating the drone.
Once youâve mastered flying in directions, practice Rotational controls. Spinning and keeping Drone
facing the same direction you are facing makes flying easier and more intuitive.
Stay 2 to 3 feet away from walls and ceilings as Drone will be drawn towards them if you fly too
close.
If propeller blades come in contact with another object or you crash, throttle down immediately to
prevent possible or further damage.
If anything prevents Droneâs blades from spinning or they become jammed, THROTTLE DOWN
IMMEDIATELY. Do not attempt to fly until obstruction has been removed and damage fixed.
Should something prevent Droneâs blades from spinning, Drone may AUTO SHUTDOWN. LiPo
battery will need to be unplugged then reconnected to restore flying power.
If the Drone flies too far away, beyond the control range of the remote, the Drone will
AUTO-LAND to prevent the Drone from flying away out of control.
REMOVING & REATTACHING
CAMERA MODULE
The Camera Module is easily removed to improve flight
performance. Simply unplug the camera connector and slide the
camera module forward to disconnect from drone. To reconnect,
simply clip camera module back onto drone and plug in the wire
connector.
1. BEGINNER â 2. INTERMEDIATE â 3. ADVANCED
It is best to start in BEGINNER MODE 1 until you
have mastered flying. Flight sensitivity can be adjusted
before or during flight.
2 - INTERMEDIATE
3 - ADVANCED
CALIBRATING & LAUNCHING
Turn OFF Remote Control.
Disconnect the LiPo battery connectors hanging
out from the back of the drone.
Pull connectors, not wires.
Reconnect battery connectors.
Quickly place Drone on FLAT LEVEL
SURFACE.
Turn Remote Control ON.
Slowly push remote control THROTTLE
STICK UP until Drone lifts into the air.
IMPORTANT: YOU ONLY HAVE A FEW
SECONDS AFTER THE LIPO BATTERY IS
PLUGGED IN TO PLACE DRONE ON A
LEVEL SURFACE FOR PROPER CALIBRATION. IF DRONE DOES NOT RISE TO A
STABLE HOVER OR FLIES ERRATICALLY,
REPEAT STEPS 1 THROUGH 6.
CAUTION: NEVER APPROACH DRONE
WHILE THE PROPELLER BLADES ARE
STILL SPINNING. THROTTLE DOWN UNTIL
THE BLADES STOP THEN TURN OFF
REMOTE BEFORE ATTEMPTING TO
HANDLE DRONE.
3A
1 - BEGINNER
IMPORTANT: Advanced Mode 3 is a
performance flight setting for OUTDOOR USE
ONLY. Blade guards and camera module
MUST BE REMOVED for proper flight operation in Mode 3.
SIZE: 297 x 210mm (folds to 148.5 x 210mm)
PAGE 7 / PAGE 4
FLIGHT CONTROLS
Familiarize yourself with Droneâs
controls before flying!
THROTTLE/ROTATION STICK
t To make the Drone LIFT, press the THROTTLE STICK FORWARD.
t The further you PUSH the THROTTLE STICK, the faster you LIFT.
t To make the Drone HOVER, find the sweet spot on the THROTTLE STICK
(somewhere in the middle).
Press UP
to lift
Press UP
to fly forward
Power On/Off Switch
Smart Device Holder
Power indicator LED
Forward/Backward Trim
STUNT Button
Press DOWN
to descend
THROTTLE/
ROTATION STICK
DIRECTION STICK
Press DOWN
to fly backward
Press LEFT
to rotate counter-clockwise
Flight Sensitivity Switch
(BLADE GUARDS & CAMERA
MODULE MUST BE REMOVED
FOR MODE 3 FLIGHT)
Rotation Trim
Press LEFT
to fly left
Left/Right Trim
DIRECTION STICK
t Push the Direction stick FORWARD to fly forward or away from you (Green blades in front).
Press RIGHT
to rotate clockwise
Push BACKWARD to fly backward.
The farther you push, the faster Drone flies in that direction.
Push the Direction stick LEFT to fly left. Push RIGHT to fly right.
The farther you push, the faster Drone flies sideways.
3B
Press RIGHT
to fly right
SIZE: 297 x 210mm (folds to 148.5 x 210mm)
PAGE 5 / PAGE 6
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : Daria Create Date : 2015:06:28 21:49:31+08:00 Modify Date : 2015:06:28 22:36:04+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Title : SV_StreamingDrone_IS_061115_F1 Creator : Daria Metadata Date : 2015:06:28 22:36:04+08:00 Creator Tool : Adobe Illustrator CS5.1 Thumbnail Width : 256 Thumbnail Height : 144 Thumbnail Format : JPEG Thumbnail Image : (Binary data 17925 bytes, use -b option to extract) Instance ID : uuid:4edab929-2c5d-4364-8559-421573ac4fc9 Document ID : xmp.did:37E3DDB37D10E5119A5DFEA2C6065957 Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:36E3DDB37D10E5119A5DFEA2C6065957 Derived From Document ID : xmp.did:36E3DDB37D10E5119A5DFEA2C6065957 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:FB7F1174072068118C14E33315A34075, xmp.iid:5C733CC91D216811822AC3EBD5A281A3, xmp.iid:8067F89513DEE411A447C961AAE25B98, xmp.iid:8167F89513DEE411A447C961AAE25B98, xmp.iid:57BA48308FF2E4118020B0F628631EBB, xmp.iid:58BA48308FF2E4118020B0F628631EBB, xmp.iid:7C4ADDD1D404E5119B649662721E9964, xmp.iid:AFCAF5306406E511ABBDB512D4379D2F, xmp.iid:51E967EE4309E5119F5798F0C7E52859, xmp.iid:75D2CD40110AE51188DE81FCE688A836, xmp.iid:34E3DDB37D10E5119A5DFEA2C6065957, xmp.iid:35E3DDB37D10E5119A5DFEA2C6065957, xmp.iid:36E3DDB37D10E5119A5DFEA2C6065957, xmp.iid:37E3DDB37D10E5119A5DFEA2C6065957 History When : 2013:05:07 15:03:03-07:00, 2015:03:23 16:20:05-07:00, 2015:04:08 11:36:27-07:00, 2015:04:08 11:42:09-07:00, 2015:05:04 16:13:32-07:00, 2015:05:04 16:36:38-07:00, 2015:05:28 13:34:23-07:00, 2015:05:29 17:38:29-07:00, 2015:06:02 09:25:07-07:00, 2015:06:03 09:54:52-07:00, 2015:06:11 14:06:17-07:00, 2015:06:11 14:06:31-07:00, 2015:06:11 14:07:44-07:00, 2015:06:11 14:08-07:00 History Software Agent : Adobe Illustrator CS5, Adobe Illustrator CS6 (Macintosh), Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1, Adobe Illustrator CS5.1 History Changed : /, /, /, /, /, /, /, /, /, /, /, /, /, / Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\SR_mechLogo.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Video drone IS\Final\SV_VideoDrone_IS_05.2015_01_CS5.ai\Links\drone battery door 1.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\Streaming_Controller_Logo_B&W.psd, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Video drone IS\Final\SV_VideoDrone_IS_05.2015_01_CS5.ai\Links\Video Remote Control.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Video drone IS\Final\SV_VideoDrone_IS_05.2015_01_CS5.ai\Links\Video Remote Control.jpg, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\top down.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Video drone IS\Final\SV_VideoDrone_IS_05.2015_01_CS5.ai\Links\camera detatch.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Video drone IS\Final\SV_VideoDrone_IS_05.2015_01_CS5.ai\Links\drone battery door 4.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Video drone IS\Final\SV_VideoDrone_IS_05.2015_01_CS5.ai\Links\drone battery door 3.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Video drone IS\Final\SV_VideoDrone_IS_05.2015_01_CS5.ai\Links\drone battery door 1.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Video drone IS\Final\SV_VideoDrone_IS_05.2015_01_CS5.ai\Links\drone battery door 2.png, BATTERY_blue294.psd, BATTERY_blue294.psd, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Video drone IS\Final\SV_VideoDrone_IS_05.2015_01_CS5.ai\Links\Video_12_Battery.psd, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Video drone IS\Final\SV_VideoDrone_IS_05.2015_01_CS5.ai\Links\Video Remote Control.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\front view.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\side view.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Video drone IS\Final\SV_VideoDrone_IS_05.2015_01_CS5.ai\Links\Video Remote Control.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\front view.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Video drone IS\Final\SV_VideoDrone_IS_05.2015_01_CS5.ai\Links\Video Remote Control.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Video drone IS\Final\SV_VideoDrone_IS_05.2015_01_CS5.ai\Links\Video Remote Control.jpg, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\top down.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\phone holder.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\remote controller.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\00 Sources For Tim\sources\android app.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\Streaming_17_FV.psd, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\Streaming_17_FV.psd, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\top down.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\top down.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\top down.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\top down.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\top down.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\top down.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\skyrocketlogo_Grey.psd, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\skyrocketlogo_Grey.psd, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\00 Sources For Tim\sources\android app.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Video drone IS\2nd draft\SV_VideoDrone_IS_03.2015_01_CS5.ai\Links\battery door.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Video drone IS\2nd draft\SV_VideoDrone_IS_03.2015_01_CS5.ai\Links\blade guard.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Video drone IS\2nd draft\SV_VideoDrone_IS_03.2015_01_CS5.ai\Links\blade guard2.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\remote with phone holder.png, BATTERY_blue294.psd, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\Streaming_17_FV.psd, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\top down.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\Streaming_16_Replace_Blade.psd, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\Streaming_15_Replace_Blade.psd, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\Streaming_14_Bottom_View.psd, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\Streaming_13_TV_Rotor.psd, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\Streaming_13_TV_Rotor.psd, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\Streaming_13_TV_Rotor.psd, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\Streaming_13_TV_Rotor.psd, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\phone holder assemble.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\phone open 1.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\phone open 1.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\phone close 1.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\remote with phone holder.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\remote with phone holder.png, C:\Users\jj\Desktop\JJ Hwang\Sky Viper\2015\Instruction\Streaming drone IS\2nd draft\Links\remote with phone holder.png Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : True N Pages : 1 Max Page Size W : 15.629862 Max Page Size H : 13.930901 Max Page Size Unit : Inches Font Name : CGFLocustResistance, EuroseBold, EurostileLTStd-BoldEx2, EurostileLTStd-Demi, EurostileLTStd, EurostileLTStd-BoldCn, EurostileLTStd-Cn, EurostileBold, EurostileRegular, HelveticaLTStd-Roman, HelveticaLTStd-Light, HelveticaLTStd-BoldObl, HelveticaLTStd-Bold, Helvetica Font Family : CGF Locust Resistance, Eurose, Eurostile LT Std, Eurostile LT Std, Eurostile LT Std, Eurostile LT Std, Eurostile LT Std, Eurostile, Eurostile, Helvetica LT Std, Helvetica LT Std, Helvetica LT Std, Helvetica LT Std, Helvetica Font Face : Regular, Bold, Bold Extended 2, Demi, Medium, Bold Condensed, Condensed, Bold, Regular, Roman, Light, Bold Oblique, Bold Font Type : TrueType, TrueType, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Unknown Font Version : Version 1.00 December 7, 2008, initial release, The IMSI MasterFonts Collection, tm 1995, 1996 IMSI (International Microcomputer Software Inc.), Version 2.035;PS 002.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.035;PS 002.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.035;PS 002.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.035;PS 002.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.035;PS 002.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 1.51, Version 1.51, Version 2.030;PS 002.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.030;PS 002.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.030;PS 002.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.030;PS 002.000;hotconv 1.0.51;makeotf.lib2.0.18671, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895 Font Composite : False, False, False, False, False, False, False, False, False, False, False, False, False, False Font File Name : CGF Locust Resistance.ttf, EUROSB.TTF, EurostileLTStd-BoldEx2.otf, EurostileLTStd-Demi.otf, EurostileLTStd.otf, EurostileLTStd-BoldCn.otf, EurostileLTStd-Cn.otf, Eurostib_0.TTF, Eurosti_0.TTF, HelveticaLTStd-Roman.otf, HelveticaLTStd-Light.otf, HelveticaLTStd-BoldObl.otf, HelveticaLTStd-Bold.otf, MyriadPro-Regular.otf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE 294 C Swatch Groups Colorants L : 49.803898 Swatch Groups Colorants A : 69 Swatch Groups Colorants B : 55 Swatch Groups Group Name : Color Group 1 Swatch Groups Group Type : 1 Swatch Groups Colorants Tint : 0.000000 Swatch Groups Colorants Swatch Name: C=0 M=0 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 0.000000 Swatch Groups Colorants Magenta : 0.000000 Swatch Groups Colorants Yellow : 0.000000 Swatch Groups Colorants Black : 0.000000 Producer : Acrobat Distiller 9.0.0 (Windows) Slug Family : Eurostile Slug Version : 001.000 Slug Outline File Size : 27250 Slug Kerning Checksum : 53356 Slug Foundry : Adobe Systems Slug Font Kind : PostScript Slug Checksum : 1699364727 Slug Post Script Name : Eurostile Slug Font Sense 12 Checksum : 1699364727 Page Count : 6EXIF Metadata provided by EXIF.tools