Skyscan 86722 Instruction Manual ATOMIC CLOCK WITH OUTDOOR WIRELESS TEMPERATURE

2014-12-11

: Skyscan Skyscan-86722-Instruction-Manual-121422 skyscan-86722-instruction-manual-121422 skyscan pdf

Open the PDF directly: View PDF PDF.
Page Count: 9

Scroll down to view the document on your mobile browser.
LCD1 display LCD2 display Hanging holes Foldable stand Battery cover Foldable stand SKYSCAN ATOMIC CLOCK  WITH OUTDOOR  WIRELESS TEMPERATURE   MODEL 86722 Instruction Manual  INTRODUCTION:  Congratulations on purchasing this state-of-the-art Skyscan Atomic Clock as an example of superior design and engineering. Providing WWVB radio-controlled time, date, time zone, indoor and outdoor temperature display,  this innovative clock is ideal for home or office use. Operation of this product is simple and straightforward. By reading this operating manual, the user will however receive a better understanding of the Skyscan Atomic Clock together with the optimum benefit of all its features.  FEATURES:  ATOMIC CLOCK:             WWVB Radio controlled time with manual time setting  12/24 hour time display  Time display: hour, minute, second  Alarm setting with snooze function  Calendar display  Weekday display (3 languages to choose from: English, French and Spanish)  Time zone setting  Daylight savings time ON/OFF option (DST)  ºC or ºF temperature display selectable   Indoor temperature display  Outdoor temperature display via 433MHz transmission  Wall mounting or freestanding  OUTDOOR TEMPERATURE TRANSMITTER:    Remote transmission of outdoor temperature to Temperature Station by 433 MHz signals  Wall mounting case   TO INSTALL AND REPLACE BATTERIES IN THE ATOMIC CLOCK  The Atomic Clock uses 2 x AA, 1.5V batteries. To install and replace the batteries, please follow the steps below:        1. Insert finger or other solid object in the space at the bottom center of the battery compartment and lift up to remove the cover. 2. Insert batteries observing the correct polarity (see marking). 3. Replace compartment cover.  DO NOT SET THE CLOCK.  Holder Function keys
TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER  The transmitter uses 2 x AA,1.5V batteries. To install and replace the batteries, please follow the steps below:  1. Remove the cover. 2. Insert the batteries, observing the correct polarity (see marking). 3. Replace the battery cover on the unit.  SETTING UP: Do not set the clock until the outdoor temperature is displayed.  1. Slide the battery cover open on the SkyScan Atomic Clock as indicated above (see "To install and replace batteries in the Atomic Clock“ above). 2. Checking the correct polarization, insert 2 x AA, 1.5V batteries into the battery compartment and replace the battery cover. 3. Once the batteries are in place, all segments of the LCD will light up briefly. Then the indoor temperature, the time as -:--, the date as 1.1. , and weekday will be displayed.    IMPORTANT: If the indoor temperature is not displayed after a few seconds, remove the batteries and wait for at least 10 seconds before reinserting them. 4. Within 2 minutes of activating the SkyScan Atomic Clock, place the batteries into the transmitter (see “To install and replace batteries in the Temperature Transmitter” above).   5. After a few seconds of inserting the batteries into the transmitter, the Atomic Clock will start receiving data from the transmitter. The remote temperature will then be displayed on the SkyScan Atomic Clock. IMPORTANT: if this does not happen after 4 minutes, the batteries will need to be removed from both units and reset from step 1. Remove the batteries and wait for at least 30 seconds before reinserting them.  6.  After the clock receives the outdoor temperature, set your time zone using the manual settings below. The default time zone is Eastern Standard Time. 7.   After the clock receives the outdoor temperature the WWVB time code reception will automatically start. This reception typically takes between 5-10 minutes in good conditions. If after 10 minutes the WWVB time has not been received, use the SET key to manually enter the set mode and change either the time or date in order to activate the WWVB reception (see manual settings below). The clock will then automatically attempt to receive the WWVB time from 12:00 am through 6:00 am each day (attempts WWVB reception every full hour within this time frame). When this is successful, the received time will override the manually set time. The date is also updated with the received time (Please refer to notes on “Radio controlled time” and “Manual time setting”).  Note: In the event of changing batteries of the unit ensure that the batteries do not spring free from the contacts. Always wait at least 30 seconds after removing the batteries before reinserting, otherwise start up and transmission problems may occur.  FUNCTION KEYS  The Atomic Clock has four easy to use keys:  SET key :   To enter into the set mode for the following functions: time zone, DST ON/OFF (daylight saving time), language, hour, minute, year, month, day, weekday, 12/24 hour, ºC or ºF temperature display   + key:  To toggle between the second, temperature or weekday display     To change any values in manual set mode  ALARM key:  To enter into the alarm set mode     To set the alarm ON/OFF  SNOOZE key:  To activate the snooze function during alarm    To display the alarm time in normal mode display     To exit the setting modes

Navigation menu