Skyworth Digital Technology 081202B PART 15 TV INTERFACE DEVICE User Manual

Shenzhen Skyworth Digital Technology Co.,LTD PART 15 TV INTERFACE DEVICE

User Manual

GENERAL INFORMATIONINSTALLATIONMENU INFORMATION3810    Main Features    For your Safety    Unpacking    General Operation    RCU34567    Rear Panel    Connecting to TV& VCR using SCART supportConnecting to TV using RCA support    Connecting to Digital Amplifier8899    Main Menu    1. Channel List        1.1 TV Channel List        1.2 Radio Channel List        1.3 Delete All   2. Installation       2.1 Antenna Connection       2.2 Satellite List       2.3 Antenna Setup       2.4 Single Satellite Search       2.5 Multi Satellite Search       2.6 TP List   3. System Setup       3.1 Language       3.2 TV       3.3 Local Time setting       3.4 Timer Setting       3.5 Parental Control       3.6 OSD Setting       3.7 Favorite       3.8 Other101111141414141516181819202021212122222323
    4. Tools        4.1 Information        4.2 Factory Setting        4.3 Upgrade by USB        4.4 Common Interface        4.5 Conditional Access        4.6 USB    5. Game    6. REC        6.1 Record Mangager        6.2 HDD Information        6.3 HDD Format        6.4 PVR Setting    7. Hot key        7.1 Info        7.2 EPG        7.3 Find        7.4 Numer        7.5 TV/Radio        7.6 Up/Down        7.7 Left/Right        7.8 Mute        7.9 Pause        7.10 OK        7.11 Audio        7.12 Recall        7.13 Fav        7.14 Teletext        7.15 Zoom232324242426272828282929292929303030313131313131313232323233
A Digital Satellite Receiver is a convenient product that allows you to view a variety of programs provided through satellite. This user's guide covers the installation of the DSR and the necessary steps to implement various features. This also explains special features available only in this DSR in detail, which will allow you to make full use of these feature.Information confirmed in this document is subject to change. We reserves the right, without notice, to make change in product design or performances as progress in engineering or technology.Main FeaturesMPEG-2 digital & fully DVB-S compliantSCPC and MCPC  receivable from C/Ku band satelliteAutomatic PAL/NTSC conversion4000 channels TV and Radio programmable32 different favorite groups selectionOn Screen Display with multi-languageFully support to 7 days Electronic Program Guide(EPG)Picture in Graphics(PIG) support256 colors On Screen DisplayAutomatic network search for newly added transpondersDiSEqC 1.0/1.1/1.2/1.3 fully support, 13/18V, 0/22KVarious channel editing function(favorite, move, lock, rename and sort)Parental control for channelsEasy to use Menu SystemSoftware upgrades through RS232 port and Receiver to receiverAutomatic turn on/off by Timer setting(multiple options)Subtitle support DVB EN300743 and EBUTeletext support DVB ETS300472 by VBI and OSDAutomatic save for last channelChannel list can be sorted by alphabetic A-ZUp to 3X3 pictures on screen, only 1 activeVideo zoom function with 1/2/4/6/8/12/16 ratioSupprot FAT16/FAT32/FAT12Only list JPEG/BMP filesDefault 2 hours, user can setting the end timeBased on size of HDD, 512M~8G size will reserve for time shiftedrecordingLock/Delete/Rename,Preview playback,Browse record files informationPlay/Pause/Stop/StepFast Forward/Fast Backward 2/4/8/16/24, Slow Forward/Slow Backward 1/2, 1/4, 1/8, Jump to user selected time point480i/p, 576i/p, upscale to 720p, 1080i
For Your SafetyBe sure to turn the Receiver off and disconnect the AC power cord before cleaning the Receiver surface. If the surface is dirty, wipe clean with a cloth which has been dipped in a weak soap-and-water solution and wrung out thoroughly, and then wipe again with a dry cloth.Switch the receiver off whenever it remains out of service for an extended period.Do not touch the receiver during thunder, since that might create electric-shock hazards.Do not block ventilation holes of the Receiver so that air can circulate freely.Do not expose the receiver un-der the sunlight. And keep it away from the heat source.Keep the receiver away from flower vases, tubs, sinks, etc., in order to avoid damaging the equipment.To avoid electric-shock hazards, do not open the cabinet, refer servicing to qualified personnel only. When the abnormal phenomenon occur, you should cut off the power immediately.
Warning statementChanges or modifications to this unit not expressly approved by the partyresponsible for compliance could void the user authority to operate the equipment .NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception,  which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different    From that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.
General OperationThroughout this manual you will notice that the everyday operation of the receiver is based on a series of user friendly on screen display and menus. These menus will help you get the most from your receiver, guiding you through installation, channel organizing, viewing and many other functions.All functions can be carried out using the buttons on the RCU, and some of the functions can also be carried out using the buttons on the front panel.The receiver is easy to use, always at your command and adaptable for future advances.Please be aware that new software may change the functionality of the receiver.Should you experience any difficulties with the operation of your receiver, please consult the relevant section of this manual, including the Problem Shooting, oralternatively call your dealer or a customer service adviser.Remote Control Batteries Guide
RCUKey FunctionTurns power ON/OFF of the DSRWhen watching a channel, mute the soundSwitches between TV and Radio mode0~9MENUEXITOK, LISTPR+, PR-Enter number of the required menu item orselect a channel number to watchPress this key one time to run menu onscreenReturn to the previous menu on the menuscreen or escape from the menuPress once to pause the screen picture, pressonce again to go to the normal modeTV/RADIOPRSwitches back to previous channelDisplays the favorite group listShow information of the current channelSwitch to teletext or subtitle modeMoves up / down a page in the listFAVINFOExecutes the selected item in the menu screenor enters the desired value in any input modeWhen watching a channel, change channels ormove to the next higher or lower item in the menuWhen watching a channel, adjust the volume ormove to the left or right item in the menuCall up the EPG (Electronic Program Guide)Display the Audio window.Switch between TV and AV modesEPGLRTV/AVPAUSEFIND Display the Find windowZOOMEnter into the zoom in modeSLEEPEnter into the sleep in modeEnter into the nine-pictures  mode displayedon the screen.TXTSHIFTRECORDPlay and stop the program Press to fast Forward or fast backwardRecord the programTimeshift  function key, Press to slow forward or slow backward
Rear PanelRear PanelConnecting to TV using SCART supportDSRSatelliteDishRear PanelFront PanelPOWER ON/OFFCONNECT VIDEO TO TV  USING RCA JACKLNB IN: CONNECT TO SATELLITE ANTENNALNB OUT:CONNECT TO THE OTHER RECEIVERCONNECT TO TV/VCR  USING A SCART CABLERF OUT: CONNECT TO TV ANT INPUTCONNECT TO A DIGITAL AMPLIFIERCONNECT TO AUDIO R/L TO  TV OR AUDIO TUNERCONNECT TO A PC FOR S/W UPGRADECONNECT  TO TV SET HDMI-OUT INPUTTVSCARTIN
Connecting to TV using RCA supportSatelliteDishConnecting to Digital AmplifierSatelliteDishDIGITAL AUDIOCONVERTOR ORAMPLIFIERSPEAKERDIGITAL AUDIOLRINLRIN VIDEOTVAUDIOTV
Main MenuThis menu consists of 6  major main menus as follow.- Edit Channel - Installation - System Setup - Tools - Game - RECDuring the installation the OK key confirms a selection and LIST key shows DownList Box  if the column has mark. You can also use the numeric keys on theRCU to enter numeric value.Use the PR+, PR- key to move upwards and downwards from one line to another line and use             key to move from main menu to sub menu and move from left side to right side or versa.Meantime, you want to escape the menu system, please press MENU or EXIT key on the RCU.Make sure that you have properly installed and connected the cables of the receiver .If the receiver is the factory status or there is no program list, when power on, the Main Menu window will be displayed on the screen.During the normal TV/Radio mode, press MENU key on the RCU  to enter into the Main Menu window.
If there is no program, you can not exit from the Main Menu window by pressingMENU or EXIT key. System will inform "No channel" and the following items turn grey.1. Press OK key or       key to pop up the "Input Password" dialogue,  you can not enter into the menu unless the correct password is inputted. The default password is "0000".2. Press PR+, PR- keys to move the cursor up or down.3. Press EXIT key or      key to move the focus to the left menu.Sub-menu Turn grey when there is no programChannel ListInstallationSystemToolsTV Channel ListRadio Channel ListDelete allAntenna Connection         Satellite ListAntenna Setup             Single Satellite SearchMulti Satellite Search        TP ListLanguage                     TV SystemLocal Time Setting      Timer SettingParental Lock              OSD SettingFavorite                        OtherInformation                  Factory Setting1. Channel List1. Press                 keys to select satellite.2. Press PR+, PR- keys to select the program that you want to play, and then press OK key to view it in the small window. If move the yellowcursor to select up or down, you will see a gray line which indicates the playing program in the small window.1.1 TV Channel ListGame Tetris             Othello             SudokuREC Record Manager   HHD InformationHHD Format     PVR Setting USBConditional CAUpgrade by USB Common Interface
3. Press FAV key to move the FAV button upward.Select the program and press OK key to pop up the favourite group list. In the list, select the group that you want to add into and press OK key,  and then you will find  the favourite mark is displayed at the right side of the selected program.Press FAV key again to exit from the fav mode, andyou will find the FAV button return to the originposition.4. Press red colour key to move the Lock button upward. Select the program and press OK key to mark this program with the Lock mark. You can cancel this mark by pressing OK key once more.Press red colour key again to exit from the lock mode, and you will find the Lock button return to the origin position.5. Press green colour key to move the Skip button upward. Select the program and press OK key to mark this program with the skip mark. You can cancel this mark by pressing OK key once more.Press green colour  key again to exit from the skip mode, and you will find the Skip button return to the origin position.6. Press yellow colour key to move the Movebutton upward. Select the program and press OKkey to mark this program with the move mark.Press PR+, PR- keys to move the cursor to the position where you want to locate and press OKkey to confirm.Press yellow colour key again to exit from the yellow mode, and you will find the yellow buttonreturn to the origin position.7. Press blue colour key to enter into the Editchannel window.
Press red colour key to pop up the Sort drop-down list.Name(A-Z): The ascending order, omitting the $ character, the number is ahead, then the capitalletter, at last the lowercase.Name (Z-A): The opposite order of the above Name (A-Z).Free/Scramble: All FTA programs are listed ahead,while all scrambled programs are listed last.Lock: all locked programs are listed at the last.Defaulti . Sort (red colour key)Press green colour key to move the Edit buttonupward. Select the program and press OK key to pop up theRename window.In Rename window, press red colour key to switch between capital letter and lower letter; press greencolour key to delete the character on the cursor;press          keys to move the cursor left or right;press numeric keys (0-9) to input the character,please refer to the down table. Press yellow colourkey to save and exit, or press blue key to canceland exit.ii. Edit (green colour key)Numeric keys Press numeric key repeatedly, display in circle1234567890.,*?!@1ABC2DEF3GHI4JKL5MNO6PQRS7TUV8WXYZ9[space]_-0If the name is empty, system will pop up a dialogue informing "Name" once yellowcolour key is pressed. Press OK key to close this dialogue.
In Delete window, press blue colour key to move the Delete button upward. Select the program and press OK key to mark this program with the deletion mark. You can cancel this mark by pressing OK key again.Press EXIT key to pop up the dialogue "Are you sure to save?". Select Yes button and press OKkey to save, or select NO button and press OK key to exit without saving.1.2 Radio Channel ListSine the same operation as 1.1 TV Channel List, here we don't explain any more.iii. Delete (blue colour key)1.3 Delete AllMove cursor to the Delete All item, and press OKKey to pop up the dialogue "Warning! Do you really want to delete all channel?".Press EXIT key to pop up the dialogue "Are you sure to save?". Select Yes button and press OKkey to save, or select NO button and press OK key to exit without saving.2. Installation1. Press OK key or         key to pop up the "Input Password" dialogue,  you can not enter into the menu unless the correct password is inputted. The default password is "0000".2. Press PR+, PR- keys to move the cursor up or down.3. Press EXIT key or            key to move the focus to the left menu.2.1 Antenna ConnectionPress               keys to select between MotorAntenna and Fixed Antenna.
2.2 Satellite List1. Press PR+, PR- keys to select the satellite up or down.  Press OK key to select and mark, and you can press OK key again to cancel the selection and the mark.2. If there is no satellite, the red colour and blue colour keys will be invalid.3. Press red colour key to pop up the Edit Satellitewindow. Press PR+, PR- keys to move cursor up ordown.Name: User numeric keys to change the name of the satellite, please refer to theEdit Channel Name.Longitude: You can press        keys to switch between east longitude and west longitude. After pressing OK key, you can use numeric keys to edit the longitude,press EXIT key  or the PR+, PR- keys to exit editing mode. The range of the longitude is from 1to 180 degree. If beyond this range, system will inform you "out of range" when you press yellow colour key on the RCU.After setting, press yellow colour key to save and exit, while press blue colour keyto exit without saving.4.  Press green colour key to pop up the AddSatellite window. Since the same operation as the above Edit Satellite window, here we don't explainany more.5. Press blue colour key to pop up the dialogue "Are you sure to delete?". Select Yes button and press OK key to delete the selected satellite. Youcan cancel this operation by pressingOK key at theNO button.
Suppose that you have selected Fixed Antenna inthe Antenna Connection window.1. Satellite: All selected satellites in the satellite list are displayed in this item.Press              keys to select the satellite in circle. Orpress OK key to pop up the drop-down list, then select  the desired satellite in the list and press OKkey to confirm.2. LNB Freq, Transponder, DiSEqC1.0, DiSEqC1.1: The same operation as the above.2.3 Antenna SetupPart A: Fixed3. 22K, 0/12V, Polarity:  You can press              keys to select in circle.Part B: MotorSuppose that you have selected Moter Antenna inthe Antenna Connection window.1. LNB Type: Select the proper LNB type.2. Motor Type: Select between DiSEqC1.2 and USALS. If you select DiSEqC1.2, the following Local Longitude and Local Latitude items will turn grey.3. Delete All: Press OK key to pop up the dialogue"Are you sure to clear set satellite position of this tuner?". Press OK key at the Yes button to clear all the memories about the position of the satellites that are connected to the current tuner.4. Motor Setting: Press OK key to the MotorSetting window.Satellite: Press              keys to select the satellitein circle. Or press OK key to pop up the drop-downlist, then select  the desired satellite in the list and press OK key to confirm.Transponder: The same operation as the above.
Position No., & Save: The range is from 0 to 63.  "0" delegates the original position. You can select the proper value when you has rotated the  antenna.Go to X: Press OK key to pop up the drop-down list, select the proper position (reference or from 1to 63) to realize the selected position.West <Save> East: Press          key to turn west, while press         key to turn east. Press OK key to pop up the dialogue "Are you sure to change this satellite's position?". Press OK key at the Yes button to save the current position, or press OKkey at the No button to cancel the operation.Recalculation: Press OK  key to pop up the dialogue "Are you sure to change thissatellite's position?". PressOK key at the Yes button to recalculation.5. Limit Setup: Press OK key to pop up the Limit Setup window.Limit Setup: Press           keys to switch among Disable Limit, East Limit and West Limit.Limit Setup: Move cursor to the Limit Setupbutton. You can press         key to turn west , orpress       key to turn east.Go to Reference: Press OK key to go to reference. If you select Disable Limit in the above Limit Setup item, this button will turn grey.6. If select USALS, Delete All item will turn grey.Local Longitude, Local Latitude: Presskeys to switch between West and East, or press        keys to switch between North and South. Press OK key to enter into the editing mode. Use numeric keys (0-9) to input the longitude or latitude, press MENU key or EXIT key to exit. The range of the longitude is from 0 to 180,while the range of the latitude is from 0 to 90. If the inputtedvalue is not in this range, system will pop up a dialogue "Out of Range" when you exit from thiswindow. You can press OK key to close this dialogue.
7. Motor Setting: Press OK key to enter into the Motor setting window. Satellite, Transponder:  Press             keys toselect satellite or transponder, or press OK key to pop up the drop-down list and select in the list.2.4 Single Satellite Search1. Satellite :2. FTA Only: Press           keys to select between Yes and No.3. Scan Channel:  Press               keys to select among TV+Radio, TV Channel, Radio.Press              keys to select the satellite in circle. Or press OK key to pop up the drop-down list, then select  the desired satellite in the list and press OK key to confirm.4. Network Search: Select between No and Yes.This item turns grey when Auto Scan is selected in the following Scan mode item.5. Scan Mode: Press          keys to select between Auto Scan and Preset Scan. Auto Scan is Blind scan, while Preset Scan is to search the presetfrequencies.6. Search: Press OK key to start searching.2.5 Multi Satellite SearchFrom the Multi Satellite Search window, you can search several satellites at the one time.1. Satellite: All selected satellites in the satellite list window are displayed on the down part. Youcan press            keys to switch among them.2. FTA Only: Press          keys to select between Yes and No.3. Scan Channel:  Press               keys to select among TV+Radio, TV Channel, Radio.
4. Network Search: Select between No and Yes. This item turns grey when AutoScan is selected in the following Scan mode item.5. Scan Mode: Press             keys to select between Auto Scan and Preset Scan. Auto Scan is Blind scan, while Preset Scan is to search the preset frequencies.6. Search: Press OK key to start searching.2.6 TP List1. Press PR+,PR- keys to select the proper satellite.2. Press red colour key to pop up the Edit TPwindow.Frequency, Symbol rate: Press             keys toadd or reduce by step one. Or press numeric keys (0-9) to input  the desired value. The range of the frequency is 3000-13450, while the range of the symbol rate is 1000~45000. The inputtedvalue is beyond this range, the value will returnto the origin value.Polarity: Press           keys to switch between Vertical and Horizontal.3. Press green colour key to pop up the Add TPwindow. Since the same operation as the aboveEdit TP window, here we don't explain any more.
4. Press yellow colour key to pop up dialogue " Are you sure to delete?". Press OK key at theYes button to delete the selected TP, or pressEXIT key to cancel the operation.5. Press blue colour key to pop up the TPSearch window.FTA only, Scan Channel, Network Search:Press             keys to select  the proper option.Press OK key at the OK button to start searching.1. Press OK key to enter into the Languagewindow. Press          keys to select the language in circle, while press PR+, PR-  keys to move the cursor up or down in circle.2. Press MENU key or EXIT key to save and exit.3. The types of the language, pleaser refer to the configuration of the customer.3. System Setup1. Press OK key or       key to move the cursor to the right menu.2. Press PR+, PR- keys to move the cursor up or down.3. Press EXIT key or        key to move the focus to the left menu.3.1 Language
Press PR+, PR- key to move the cursor up or down, while press           keys to change the setting and the setting will take effect immediately.1. Display Mode: Select among Auto,PAL,PAL-M, PAL-N, NTSC.2. Aspect Mode: Select among 4:3LetterBox,4:3PanScan, 16:9.3.2 TV3. Video Output: Select between RGB and CVBS.4.RF System: Select among PAL,PAL- M,PAL-N,NTSC and Auto.5.RF Channel:PAL:21-69,NTSC:14-83.6. DV-OUT: Select among 480i/576i, 480P/576P, 720P and 1080i.1. Summer Time: Select between ON and OFF."OFF" delegates the normal time. If select ON,time will add one hour.2. GMT Offset: When select "ON" in GMT Usage item, system will get the date and time information from the screen automatically. Date and Time two items will turn grey.  Select theproper option in the GMT Offset item. The defaultsetting is GMT ON.3.3 Local Time Setting3.Date, Time:  When select "OFF" in GMT Usage, Date and Time two items take effect, while GMT Usage turns grey. Use numeric keys to input the desired value.5.After setting, press MENU key or EXIT key to exit and save. If the value is invalid, system will inform "Invalid input! Continue to edit?". Press OK key at the Yes button to continue the modification, or pressOK key at the No button to exit without saving.3.4 Timer SettingIf there is no program, you can not enter into this window. There are 8 timers that can be set. Select Timer up or down, and press OK key to enter into the setting window.1. Timer mode: The default mode is off. You can set the timer once, daily, weekly, monthly andyearly.
2. Timer Service: Select between Channel and Message. If Channel is selected, the Wakeup Channel is displayed in the following item. If Message is selected, the Wakeup Message is displayed in the following item. In wakeup message, you can select among Birthday,Anniversary, General. At the same time the duration item turns grey.3. Wakeup Date, On Time: Use numeric keys to input the valid date.Duration: Set the gap time. After waking up, system will power off automatically after the duration time.Press MENU or EXIT key to save and exit.Before entering into the Parental Lock window, you need input the correct password. The default password is0000.1. Menu Lock: Press              keys to select between Off and On. If select "On" , you can notenter into the window before entering the password.2. Channel Lock: Press            keys to select between Off and On. The default value is Off.3.5 Parental LockIf  select "On", you can not view the locked channel set in Chanel List Edit window until you have inputted the correct password. 3. New Password: User numeric key (0-9) to input the new password.4. Confirm Password: Input the new password once again.  Confirm password must be the same as the New password. System will inform you "Change password successfully!" while they are the same, or inform you to input the password of Confirm password once again when they are not the same.3.6 OSD Setting1. Subtitle Display:  Press              keys to select between On and Off.2. OSD Timeout: Press            keys toselect from 1 to 10 by  step1. The default values Is 5.3. OSD Transparency: Press            keys to select among Off, 10%, 20%, 30%, 40%. Thedefault option is Off.Press MENU or EXIT key to save and exit.
There are 32 favorites group listed in this window.  Press PR+, PR-  keys to select one and press OK key to the Rename window.Since the same operation as the above the AddSatellite window, here we don't explain any more.3.7 Favorite3.8 Other1. LNB Power:Select between Off and On.2. Channel Play Type: Select among All, Free, Scramble.3. Channel Change: Select between Freezeand Black screen.4. Beeper: Select between Off and On.4. Tools1. Press OK key or       key to pop up the "Input Password" dialogue,  you can not enter into the menu unless the correct password is inputted. The default password is 0000.2. Press PR+, PR- keys to move the cursor up or down.3. Press EXIT key or      key to move the focus to the left menu.4.1 InformationPress OK key to the Information window.
4.2 Factory SettingPress OK key to enter into the Factory Settingwindow.Select Yes button and press OK key to return to the factory setting. All searched channels and setinformation will be erased.Select No button and press OK key to cancel this operation, or press MENU or EXIT key to canceland exit.1.Upgrade File: Show the Upgrade File.2.Upgrade Mode: Select between AllCode and  Dump. When users switch theupgrade mode,  Upgrade File  will show the corresponding file according to the table below: 4.3 Upgrade by USB3.Press OK key on start button to start receiving the data from USB device.When the USB device is not connected, this item is grey, you can not edit  it now.Upgrade Mode                File feature All code :              File named as "*.abs" Main Code:          File named as  *.binRadio back:         File named as "*.m2v",                              the picture will be used                               as both radio back and                               menu back Default db:           File named as "*.bin"Select the upgrade mode and upgrade file, then you can start upgrade by USB. 4.4 Common InterfacePress OK key to enter into the main menu.You can know information about product Ordering, Subscription Status, PPV Status, Token Status  and so on.There are 2 types of CI: Conax access and Irdeto access. Here we take Conax access for example.
Know the detail information of Tokens Status.Know the detail information of Subscription  Status.Subscription Status Tokens Status Not avaliable in this software.Product OrderingPPV Status No Entitlement.Changes CA PIN  window is designed for changing the smart card's PIN, which is required if you want change the maturity level settings.In order to change the PIN, you must know the current PIN also called the old PIN. Input the new PIN and twice the PIN (New PIN and Confirm PIN must be the same) your want to set. Move cursor to OK button and press OK key, and then system will pop up a dialogue informing you the changing result.Note that the PIN can only constructed with Arabic numerals.Change CA PIN Do the same way as the above Change PIN.Note: The signature PIN will be locked after the three erroneous attempts to enterthe correct PIN. If locked, please call the dealer for help.Change Signature PINIn Maturity Rating submenu, you can change the smart card s maturity rating, which will affect whether scrambled program is granced or not. There are four availablesettings for selection: G-General Audience,A-Over18,X-Erotic,G-For the family,PG- parental Guidance.In order to change the maturity level, you must enter the correct PIN. If all of the  itemsare satisfied, then you can click change maturity level button. A dialogue will tell you whether your change is succeeded or not.Maturity Rating
Modem Ordering Not Modem available.About Conax CA Know the information about  Conax CA.MessageAll messages  are listed in this window.LanguageShow all the language  you can select.Loader Status You can select allow download  or forbid download.4.5 Conditional CA4.5.1 About CA InfoSelect Conditional CA item and press OK key, then you will enter into its sub-menu which consists four items of About CA Info, Change PIN, Change Signature PIN, Maturity Level.In About CA Info sub-menu, you can know the basic information about this conditional accesssuch as Card Status, CAS System ID, Interface Version, Card Number, Number of sessions, Country Indicator, and Maturity Level.4.5.2 Change PINChanges PIN window is designed for changing the smart card's PIN, which is required if you want change the maturity level settings.In order to change the PIN, you must know the current PIN also called the old PIN. Input thenew PIN and twice the PIN (New PIN andConfirm PIN must be the same) your want toset. Move cursor to OK button and press OKkey, and then system will pop up a dialogue informing you the changing result.Note that the PIN can only constructed with Arabic numerals.26
4.5.3  Change Signature PINDo the same way as the above Change PIN.Note: The signature PIN will be locked afterthe three erroneous attempts to enter the correct PIN. If locked, please call the dealer forhelp.4.5.4  Maturity LevelInput the PIN then Move cursor to Select Maturity level,you can select A-Over18,X-Erotic,G-General audience,PG-Parental Guidance,move cursor toChange Maturity level button and press OK key,and then system will pop up adialogue informing you the changing result.4.6 USBUSB menu will be automatically shown when insert U disk to USB port except auto scan, multi picture, upgrade. Or open USB menu according to Menu -> Tools-> USB. Press OK to enter into this window.USB menu will be disabled when no USB deviceis plugged. Media Play List will not be savedwhen USB plug out or standby or power off.Move scroll bar when press up/down key, page up or down by page key. Go into sub-directory when press ok key in the file directory, play the selected file whenscroll bar is on the file, automatic return USB menu after play is over.Color key operation:1.Green key:  put the file selected by scroll bar to play list when press Green Key, in the meanwhile show Add to Play List , display disappear after about oneseconds, the file will be added into OGG play list if it is one OGG file, to Image play file for one Image file.2.Yellow Key: All the OGG files in current directory are added into OGG play list by yellow key, and screen display  Add to Play List , display will disappear after onesecond.3.Blue Key: All the Image files in current directory are added into Image play list by Blue key, and screen display  Add to Play List , display will disappear after onesecond.4.Red Key: Show one operation window:  please select play list type  by Red key,you can select Music or Image play by Left/Right Arrow key, open the selected Play list if press OK key. There will display  This type of play list does not exist  if there are no any file. 27
Image view operationPlease see the below image operation menu if Image function is selected.1.Red Key: Start to browse image if press REDkey, or play the selected image if press OK key,return to USB File list if play is over, or return by press Exit Key.2.Yellow Key: Delete selected image if pressYellow Key.3.Blue Key: Press Blue Key, will delete all image files in play list, but system will remind you  Are you sure?   before practical operation, if you select Yes, all file will be deleted and Play listwindow will be closed. 4.Green key:  Press Green Key will show Setup Menu, please see the besides setup menu.5. Game1. Press OK key or       key to  enter into the game.2. Press PR+, PR- keys to move the cursor up or down.3. Press EXIT key or         key to move the focus to the left menu.4. Select the game that you want to play and press OK key to enter into the window.6. REC6.1. Record Manager1. Press PR+, PR- keys to select up or down,2. Press green color key to lock the channel you selected, the lock symbol will be marked behind the channel. Before you lock the channel you must input the correct password, the default password is 0000.3.Press blue color key to delete the channel you selected.4.Press red color key to pop up the window for renaming the channel you selected,press numeric keys (0-9) to input the character .28
5.Press [Play] key to preview. Press [OK] to play the recorder in full screen as below picture.6.Press [Pause] key to pause. Press [Pause] key repeatedly to realize the step function. Press       /       key to fast Forward or fast backward. Press    /       key to slowforward or slow backward .6.2 HDD InformationShow you the information in  windows as besides.6.3 HDD formatPress OK at the HDD Format button to pop up the dialogueAre you sure to format the disc? You can select Yes or No.1.Timeshift:If you set timeshift  On , it willrecord the current channel you watchautomatically. Then you can press [Pause] / [Fast Backward] / [Slow Backward] key to watch the previous program. If timeshift is Off ,timeshift function doesn’t work. Select betweenON and OFF.2.Jump:Select among 30sec,1min,5min,10minand 30min.3.Timeshift to Record: Select between ON and OFF.6.4 PVR SettingPress INFO key to pop up the Info bar.Press INFO key again to pop up the program guide of the current program. You can press          keys to know the program guide of the future16 days.7. Hot  Key7.1 Info29
Press EPG key to enter into the  EPG window.1. Press PR+, PR-,                keys to select up or down, left or right.2. Press red colour key to pop up the Time Barwindow. Press PR+, PR- keys to select up or down, while press            keys to select left or right in the time bar.       : Press OK key at this button to return to the EPG window.7.2 EPG       : Press OK key at this button to move the cursor to the current time line.        : Press OK key to push the time forward or backward by half an hour.         : Press OK  key to push the time forward or backward by half an hour.          : Press OK key to push the time forward or backward by a day.4. Press green colour key to enter into the Timerwindow. You can add the current program to the Timer. If 8 timers  are already yet, system will inform you "Timer is full!'.3. Detail Information: In the EPG window, pressPR+, PR-            keys to select the channel andprogram, and press OK key to know the detail information of the current program.Press FIND key on to pop up the Find window.Use numeric keys to enter into the character anduse the colour keys to realized the corresponding operation.7.3 FindUse the numeric keys (0-9) to input thenumber of the desired channel. If the inputted 7.4 Numbernumber is beyond the valid channel number, system will "No such a channel" andpress OK key to close this message.30
In normal mode, press TV/RADIO key to switch between TV mode and Radio mode.7.5 TV/RADIOPress PR+, PR- keys  to change the channel up or down. If in the all satellites group, you can select channel in all searched channels. If in the specific satellite, only canselect channel  in the satellite group.7.6 Up/Down (Channel Change)Press             keys to change the volume. Press         keys to decrease the volume,while press       keys to increase the volume.7.7 Left/Righ (Volume+/-)Press         key to turn off the volume. You can press        key once again to restore the volume, or press            keys to increase  the volume.7.8 MuteDuring the viewing, you can press PAUSE key to stop the picture while the volume continues. You can play the picture by pressing PAUSE key once again.7.9 Pause1. During the viewing or listening, press OK keyto pop up the TV program list or the Radio program list.2. Press PR+, PR- keys to select the channel upor down, and then press OK key to play this channel  in full-screen.3. Press             keys to select the satellite.4. Press MENU or EXIT key to close this window.7.10 OK1. Press     keys to enter into the Audio window.2. Press              keys to select among Left, Right, Stereo, and Mono.3. Changing the audio mode is only connected with the current  channel, not all the channels.4. Press MENU or EXIT key to close this window.7.11 Audio31
Press         key to switch the current  channel to the previous channel.7.12 Recall1. Press FAV key to pop up the favourite group window.2. Press            keys to select the favorite group.Press PR+, PR- keys to select the channel upor down. Press OK key at the selected channel to view it in full-screen. Press MENU or EXITkey to exit.3. If there is no favorite channel,  system willinform " No FAV Channel!" when you press FAVkey.7.13 FAV1. Press ZOOM key to switch among Zoom*1, Zoom*2, Zoom*3, Zoom*4, Zoom*5,Zoom*6, Zoom*8, Zoom*12, Zoom*16.2. In zoom mode, press PR+, PR-                keys to move the cursor up, left, right, down.3. Press MENU or EXIT key to exit7.15 ZoomPress TXT key to open the teletext on the screen. If there is no teletext, system willinform "No Teletext Data". Press EXIT key to exit.7.14 Teletext32
Problem Possible causes What to doThe display on the front panel does not light up.No sound or picture, but thefront panel shows red light.Main cable is not connected.The  is in standby mode.receiverCheck that the main cable is plugged into the power socket.Press the standby button.No sound or picture.The satellite dish is not pointing at the satellite.Adjust the dish. Check the signallevel in the Antenna Setup menu.No signal or weak signal.Check the cable connections, LNB andother equipment connected between the LNB and the receiver, or adjust the dish.Bad picture / blocking error.The satellite dish is not pointing at the satellite.  Adjust the dish.Signal is too strong.Connect a signal attenuator to the LNB input.Satellite dish is too small. Change to a larger dish.LNB noise factor too high. Change to an LNB with lower noise factor.The LNB is faulty. Change the LNB.The picture is not showed on the screen, when switching on.The system is connected by RFleads.Check the UHF channel fixed in yoursystem and tune the UHF channelproperly.The system is connected by RFleads and the output channel of the receiver interferes with an existing terrestrial channels or Video signal.Change the   output channel toa more suitable channel, or connect the system by SCART leads.receiverThe RCU is not working. Battery exhausted. Change the batteries.RCU is incorrectly aimed. Aim RCU at the  , or check that nothing blocks the front panel. receiverNote : If you have tried all of the actions suggested above, without solving the problem, please contact your dealer or service provider.There is interference on your digital satellite channels, an existing terrestrial channel or video signal.33

Navigation menu