Sleep Number 11000 Power Supply User Manual 207512 it Assembly Guide V13

Select Comfort Corp Power Supply 207512 it Assembly Guide V13

207512_it Assembly Guide_V13

USER GUIDEGET HELP WITH ITHelp is just a click or phone call away.If you have questions about your it™ bed or SleepIQ® technology, go to itbed.com/setup or call 1-877-252-7813121983©2016 Select Comfort Corporaon8/16   207512SLEEP NUMBER, SELECT COMFORT, SLEEPIQ and the Double Arrow Design are registered trademarks and IT is a trademark of Select Comfort Corporaon.  iTunes Store is a registered trademark of Apple Inc.FCC COMPLIANCEThis device complies with Part 15 of the FCC Rules. Operaon is subject to the following two condions:  (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operaon. To comply with the FCC RF exposure compliance, no change to the antenna or device is permied. Any change to the antenna or device could result in the device exceeding the RF exposure requirement and void a user’s authority to operate the device.For LPM-11000B (Valve Box)To comply with FCC and Industry Canada RF exposure limits for general populaon/uncontrolled exposure, the antenna(s) used for this transmier must be installed to provide a separaon distance of at least 10mm from all persons and must not be operang in conjuncon with any other antenna or transmier, except in accordance with FCC mul-transmier product procedures. For LPM-11000 (Power Supply)To comply with FCC and Industry Canada RF exposure limits for general populaon/uncontrolled exposure, the antenna(s) used for this transmier must be installed to provide a separaon distance of at least 60mm from all persons and must not be operang in conjuncon with any other antenna or transmier, except in accordance with FCC mul-transmier product procedures.WARNING:  Read all instrucons before use to avoid injury and reduce the risk of burns, re and electrical shock.   Improper use of product can result in serious injury or death.  Follow the safety informaon in this product instrucon sheet.
ACT ModuleUNZIP ITWith the maress fully inated, unzip the pocket at the foot  of the bed. Pull the cord (A) out of the pocket and plug it into the AcveComfort™ technology (ACT) module. Connect the two color-coded air hoses (B) from the pocket to each side of the ACT module. Tuck the module into the pocket and zip it closed.POWER ITPull out the power cord from the opening at the head of  the bed, plug it into the power supply module and place  the module on the oor. Plug the power cord into the  power supply module and into a wall outlet. Two lights on  the power supply module will blink. Maress setup is complete.CONNECT ITOpen your SleepIQ� app on your smart device and follow the instrucons to connect your system. All ve icons on the power supply module will light up. Now you’re ready to sleep on your new it™ bed.Congrats on your new it™ bed. Follow these 6 steps for easy setup or see how to assemble it at  itbed.com/setupDOWNLOAD ITIf you haven’t already, get the free SleepIQ� app from Google Play or the iTunes Store.�Power Supply ModuleABB1 456UNPACK ITThe it™ bed requires a solid, at surface. If you’re using a bed frame and base, set them up before unboxing the maress.UNROLL ITSet the maress on your base and remove it from the bag. Let it unroll (it will inate on its own in about 15 minutes). Once inated, ensure the green it™ bed label is at the foot of the bed.23

Navigation menu