Sleep Number 11000 Power Supply User Manual 207512 it Assembly Guide V13

Download:
Mirror Download [FCC.gov]
Document ID	3103261
Application ID	mg53da9vUnIxbZyHFvltTg==
Document Description	207512_it Assembly Guide_V13
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	42.54kB (531712 bits)
Date Submitted	2016-08-18 00:00:00
Date Available	2016-08-22 00:00:00
Creation Date	2016-08-09 10:36:41
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2016-08-09 10:37:52
Document Title	207512_it Assembly Guide_V13
Document Creator	Adobe InDesign CC 2014 (Macintosh)

FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. To comply with the FCC RF exposure compliance,
no change to the antenna or device is permitted. Any change to the antenna or device could result in the
device exceeding the RF exposure requirement and void a user’s authority to operate the device.
For LPM-11000B (Valve Box)
To comply with FCC and Industry Canada RF exposure limits for general population/uncontrolled exposure,
the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 10mm
from all persons and must not be operating in conjunction with any other antenna or transmitter, except in
accordance with FCC multi-transmitter product procedures.
For LPM-11000 (Power Supply)
To comply with FCC and Industry Canada RF exposure limits for general population/uncontrolled exposure,
the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 60mm
from all persons and must not be operating in conjunction with any other antenna or transmitter, except in
accordance with FCC multi-transmitter product procedures.
USE R GUIDE
GET HELP WITH IT
Help is just a click or phone call away.
If you have questions about your it™ bed or SleepIQ® technology,
go to itbed.com/setup or call 1-877-252-7813
SLEEP NUMBER, SELECT COMFORT, SLEEPIQ and the Double Arrow Design are registered
trademarks and IT is a trademark of Select Comfort Corporation.
iTunes Store is a registered trademark of Apple Inc.
121983
©2016 Select Comfort Corporation
8/16 207512
WARNING: Read all instructions before use to avoid injury and reduce the risk of burns, fire and electrical shock.
Improper use of product can result in serious injury or death. Follow the safety information in this product instruction sheet.
UNZIP IT
Congrats on your new it™ bed. Follow these 6 steps for easy setup or see how to assemble it at
itbed.com/setup
of the bed. Pull the cord (A) out of the pocket and plug it into
DOWNLOAD IT
With the mattress fully inflated, unzip the pocket at the foot
If you haven’t already, get the free SleepIQ� app from Google Play or the iTunes Store.�
color-coded air hoses (B) from the pocket to each side of the
ACT Module
ACT module. Tuck the module into the pocket and zip it closed.
POWER IT
UNPACK IT
Pull out the power cord from the opening at the head of
the bed, plug it into the power supply module and place
The it™ bed requires a solid, flat surface. If you’re using a bed frame and base,
the module on the floor. Plug the power cord into the
set them up before unboxing the mattress.
power supply module and into a wall outlet. Two lights on
UNROLL IT
the power supply module will blink. Mattress setup is complete.
Power Supply Module
CONNECT IT
Set the mattress on your base and remove it from the bag. Let it unroll (it will inflate
Open your SleepIQ� app on your smart device and follow the instructions to
on its own in about 15 minutes). Once inflated, ensure the green it bed label is at
connect your system. All five icons on the power supply module will light up.
the foot of the bed.
Now you’re ready to sleep on your new it™ bed.
™
the ActiveComfort™ technology (ACT) module. Connect the two

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c014 79.156797, 2014/08/20-09:53:02
Create Date                     : 2016:08:09 10:36:41-05:00
Metadata Date                   : 2016:08:09 10:37:52-05:00
Modify Date                     : 2016:08:09 10:37:52-05:00
Creator Tool                    : Adobe InDesign CC 2014 (Macintosh)
Instance ID                     : uuid:671f3147-5a10-5449-89fc-b4707639c425
Original Document ID            : xmp.did:8bb9ba6e-2746-4493-8d62-0cb0da19de08
Document ID                     : xmp.id:1abe30a1-fd58-44fb-a686-2be75273a211
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:e80032e7-ecab-4395-971a-6e37c09e2b56
Derived From Document ID        : xmp.did:2bf7dc13-22cd-4939-bb73-97439bbcc996
Derived From Original Document ID: xmp.did:8bb9ba6e-2746-4493-8d62-0cb0da19de08
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2014 (Macintosh)
History Changed                 : /
History When                    : 2016:08:09 10:36:41-05:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
Slug Family                     : Avenir LT Std
Slug Version                    : 1.029
Slug Outline File Size          : 0
Slug Kerning Checksum           : 0
Slug Foundry                    : Adobe Systems
Slug Font Kind                  : OpenType - PS
Slug Checksum                   : 1891947131
Slug Post Script Name           : AvenirLTStd-Medium
Slug Font Sense 12 Checksum     : 1891947131
Page Count                      : 2
Creator                         : Adobe InDesign CC 2014 (Macintosh)

EXIF Metadata provided by EXIF.tools