Sleep Number 7000A Sleep monitoring and tracking system with the ability to monitor heart rate, respiration rate, and motion. User Manual PowerPoint Presentation

Download:
Mirror Download [FCC.gov]
Document ID	2197458
Application ID	hNiwGAeGGQUy7HFT+aTXqg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	249.74kB (3121750 bits)
Date Submitted	2014-02-21 00:00:00
Date Available	2014-05-01 00:00:00
Creation Date	2014-02-12 16:16:09
Producing Software	Nitro Pro 9 (9. 0. 5. 9)
Document Lastmod	2014-02-12 16:16:17
Document Title	PowerPoint Presentation
Document Creator	Nitro Pro 9 (9. 0. 5. 9)
Document Author:	Bates, Michael

With Sleep IQ Firmness control system
Setting up your SleepIQ Firmness Control System……………pg 4
Wi-Fi Configuration…..……………………………………………………..pg 5
Wi-Fi Troubleshooting………………………………………………………pg 6
pg 7
pg 12
pg 17
pg 19
pg 21
pg 23
pg 25
pg 28
Sleep IQ Firmness Control™ System
• Open the door located above the hose connections on
the end of the pump. Inside you will find the Sleep IQ
module. Push on it to ensure fully engaged and close the
door.
• Unplug the pump and begin Wi-Fi
configuration set up
• Plug the two voice control modules into the
connectors located in between the pump
hose ports at the end of the pump.
The first two lights on the LED panel will light up to
indicate that the power is on and the remote bind
window is open. At this time you need to simply grab
your remote and the screen should light up and bind
automatically to your pump, turning that second light
solid
Sleep IQ Firmness Control™ System – Wi-Fi Configuration
•Remove the USB stick from the pump box and go to a
computer or device that both has a USB port and can connect
to the internet
•Log into URL at:
http://uitest.zepp.bamlabs.com/zep_webapp/#/signin
•Create your account if you haven’t already done so utilizing
the link and log on information you received via email when
you purchased your bed
•When all 5 of the LED lights are on you can remove the USB
stick from the pump. To do so place a finger on the Sleep IQ
module to ensure the connection between the module and the
pump remains engaged
Go to Wi-Fi troubleshooting for issues or questions regarding
installation
•Go to the account admin screen and enter in your home Wi-Fi
network name and password. Be careful to use correct
capitalization, spacing and spelling. For example,
“NetworkName” versus “Networkname” versus
“networkname” and “network-name” are all different!
•Plug your USB stick into your computer
USB Port
•Select the “download Wi-Fi key” and save the file to your USB
stick
•Safely remove the USB stick from your computer and return to
your pump
•Unplug your pump from the wall
•Open up the plastic door above the hose connections. In the
Sleep IQ module you will see a USB port on the left hand side
(see photo to the right). Plug your USB stick into the USB drive
on the Sleep IQ module
•Plug the pump back into the wall
•Once powered on your pump will begin booting and connect
to your home Wi-Fi
Sleep IQ Firmness Control™ System – Wi-Fi Troubleshooting
Light
On
Blinking
Off
Try this
No power to pump 
Pump is receiving power
Pump is booting up
Pump is working and
bound to a remote
Remote attempting to Pump Nonbind
Functional

Rebind your remote
Pump computer is
connected to your home
network
Attempting to
connect to your
network

Return to your account settings and reenter your network name and
password. Pay attention to case,
spelling and spaces
Check Wifi strength in your bedroom
using another device
No connection to
your home
network

Check power connections
Pump connected to
Internet
n/a
No internet
connection

Try to connect to internet with another
device on your network
Data sent and received
from your pump via the
internet
Establishing contact
No connection to
your account via
the internet

Return to your account settings and reenter your network and password. Pay
attention to case, spelling and spaces
If you experience further issues, please contact Customer Service at the number listed in the back of this manual
Voice control module
Voice Control Modules (2)
Sleep IQ Firmness Control System
88
9
10
11
12
13
14
15
16
17
18
19
20
23
The equipment described in this guide has been tested and found compliant with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna .
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: Any attempt to make changes or modifications could void the user’s authority to operate the equipment
according to FCC certification.
24
25
26
27
28


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Author                          : Bates, Michael
Create Date                     : 2014:02:12 16:16:09Z
Modify Date                     : 2014:02:12 16:16:17Z
XMP Toolkit                     : 3.1-701
Creator Tool                    : Nitro Pro 9  (9. 0. 5. 9)
Metadata Date                   : 2014:02:12 16:16:17Z
Format                          : application/pdf
Creator                         : Bates, Michael
Title                           : PowerPoint Presentation
Description                     : 
Keywords                        : 
Producer                        : Nitro Pro 9  (9. 0. 5. 9)
Document ID                     : uuid:0e1e55bc-0b0b-492d-a1d4-f94ba098c4b5
Page Mode                       : UseNone
Page Count                      : 30

EXIF Metadata provided by EXIF.tools