Smarfid Security Equipment FSLE8 Fingerprint Series Reader User Manual

Shanghai Smarfid Security Equipment Co, Ltd. Fingerprint Series Reader

Users Manual

EnFinFinFinDaAc Fnrollment nger Templangerprint Canger Templaata Synchroccess Mode Friendly “ToucarryimpliMetareadand affec ate Storage apacity ate onization Number padInstallatch” number y any movingies more dural back plate er install on back-to backcting the read NetworCan use CFingerprinStore in FSupport 2maximum Use softwvia RS485Card OnlyFingerprind Fingerprint tion pad does nog parts, whicrable. allows the metal surfack without d range. rk VersioConfigurationnt Scanner toingerprint Sc,000 users, 4,000 templware to upload5 y; Fingerprintnt + Card; Finot h ce on n Card to chao Enrollment canner lates d and downlot Only; ngerprint or CHigh Universal bthe reader different sizAll input anprotected acharges. ange Device oad Card Securiback plate allbe installed ze of gang bond output sigagainst staticStandalEnable usaperform offlStore in MifBased on thAccess ConNo synchroCard Only; ity Finlows on ox. nals are c one Versage of a Fuine enrollmefare Card he card capantrol System nization requFingerprint +gerprinReversAll inpuprotectesion unction Cardent acity of the uired + Card nt ReaStandard Finse power prouts are 12Vdced. d to aderngerprintotection. c
FCC Caution. § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant topart 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferencein a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user'sauthority to operate the equipment. Model Number: MW 8 N2 N3 – 8 X3 RF Technologies Reader Appearance and Function X1X2 MW = Mifare Technology N18 = Fingerprint Reader ; N2A = Standard Cover with Black Belt; B = Standard Cover with Sliver Belt N32 = Read UID / Card Number; 3 = Reader Sector N43 = Terminal (Default) ; 8 = Pigtail X3N = No Number pad; K = Number pad
Model Functions Standard Fingerprint Reader Keypad Fingerprint Reader Configurable Functions Re-configure Window 5 seconds (Default) or Half an hour after Power up Reader Output Format CSN/UID 32bits, 34bits, 56bits (backward/forward), file content reading for programmed ID Wiegand Pulse Width Different choices to fit with different Controller’s requirements Keypad Output N/A Definable Buzzer Control Reader & Controller control (Default) or Controller control only LED/Back lit Control Define different LED color response base on Green LED cable input Technical Specifications Typical Read range 3 – 5 cm Reader Standard Output Wiegand (RS232 & RS485 optional) Standard Keypad output N/A Wiegand with 4 bits burst Wiring Distance 150m (22 AWG with shielded cable) Fingerprint Scanner Optical Fingerprint Capacity 4,000 templates，each user can enroll 2 fingerprints (Network Version) Based on the card capacity (Standalone Version) Template Size 193 Bytes Fingerprint Parameter Verification Time: 1 s / 1000 fingerprints stored，FRR≤0.001%，FAR≤1% Access Mode Network and Standalone Version: Card Only，Fingerprint + Card Network Version Only: Fingerprint or Card，Fingerprint Only Template Synchronization Use software to upload and download via RS485 (Network Version) Templates store inside card (Standalone Version) Operating Specification: Operating Voltage 10 - 15VDC Operating Current 250mA (max) Operating Temperature -20℃-60℃ Exterior dimension 186 L * 85 W * 22 H (RFID Reader) / 31.5 H (Fingerprint Scanner) mm Case material PC+ABS Standard Color Black and White Operating Humidity 20% - 85% Weight 330g
FingerprintReaderInstallationandOperationManual FingerprintReaderPackage1. FingerprintReaderX12. StainlessSteelscrewM4X25X2 Specification1. OperatingVoltage（V）:5~16VDC2. OperatingCurrent(Normal)（mA）:≤150OperatingCurrent(CardPresent)（mA）:≤1503. ReadRange（cm）:>6cm（Whenthefingerprint(FP)scannerisworking,thereadrangewilldecreasedto>5cm）。4. Wiegandtransferdistance（m）:>1505. OperatingTempe rat ure （℃）:‐20‐606. OperatingHumidity（%）:20‐85 NetworkMode1） Max.supported2000user,2FPtemplatefor1user.2） ConfigureEnrollmentmode：normalreader；enrolldevice。3） Configureaccessmode：Card+FP；Cardonly；FPonly；CardorFP;4） SupportedMifare,125khzProxandEMtechnologies.5） SupportedMifareconfigurationcard:1） CardFormat2） ReadContent3） Configuredevicetobeenrollmentornormalreader4） Changedaccessmode. Mounting1） Connectedallnecessarywirecorrectly，mountmetalplate(Fig.1)ontogangboxusingtwoStainlessSteelscrew.2） Afterthat,mounttheFPreaderontothemetalplate.(Fig.2)
     Fig.1Fig.2
 Wiring+12V+12VGND0VD0/R_485AWeigandD0/RS232/485AOutputD1/R_485BWeigandD1/RS232/485BOutputCOM_485A485AOutputtoPC（NetworkMode）COM_485B485BOutputtoPC（NetworkMode）SPK_INSpeakerInputRLED_INRedLEDInputGLED_INGreenLEDInputN/AD_BELLDoorBellOutputTAMPERTamperOutput SystemConnectionMap OperationPrepareItems： FPEnrollmentSoftware 1pcofEnrollmentDevice 1ormorethan1pcofFPreader UserCard RS485toUSBConvertor
1. CollectuserFP(2Fingerprinttemplates)andusercarddetailstoFPEnrollmentSoftwareDataBaseviaEnrollmentdevice.2. Downloadtheuserdatafromsoftwaretodevice. FPSoftware1.Enrolltheuserinformationvia“UserManagement”interfaceofEnrollmentSoftware.a)“ReadCard”:Presentcardtogetthecardinformation;orenterdirectb)“EnrollFP”:PutuserfingeronscannertocollectFPtemplate;eachusershouldenroll2differentFPtemplatesc)Fill‐inandsavenecessaryinformationeg.username.StatusEnrollCardSuccessorEnrollFPSuccessOrangeLEDlightup，buzzerlongbeeponce（100ms）；Bluebacklitlightupfor5s。WaitingforFPScanFPScannerblueLEDlightup3. DownloadtheuserinformationfrommaininterfaceofFPsoftwaretoFPreader.a） “QueryDevice”:Checktheonlinestatusofeverydevice.b) Tickalluserswhichwillbedownloaded,click“Download/Delete”.Userinformationwillbedownloadedintodevice.c) Rightclickreadermanualunder“devicemanagement”.Click“Format”toclearalluserinformationwhichstoreinsideonthatdevice.StatusDownloading/deletingorformattingFPreaderBacklitwilllightandoffin1scontinuously（Light500msoff500ms）
 CardReading FPreaderabletoseteitherof4typesofaccessmode.TheyareCardonly；Card+FP；FPonly；CardorFP. CardOnly:Presentcardtogetcarddata>outputcarddatatocontroller Card+FP：Presentcardtogetcarddata>comparethecarddataandthedatawhichstoreinsidetheFPreaderandfindoutthecorrespondinguserID>scanFPandcomparethecorrespondingFPtemplate>Ifsuccess,outputcarddatatocontroller FPonly：FPscannerwillalwaysgetreadytoscan.ScanFPandcompareallFPtemplatewhichstoreinsidedevice>Ifsuccess,getthecorrespondinguserIDanddata>outputcarddatatocontroller CardorFP：Pleasereferto“CardOnly”and“FPOnly”CardonlyReadcardsuccessOrangeLEDlightup，buzzerlongbeeponce（100ms）；Bluebacklitlightupfor5s.OutputcarddataFPonlyWaitingforFPscanningNoLEDlightupnormally.Whenuserputfingeronthescanner,FPScannerblueLEDlightupCompareFPsuccessOrangeLEDlightup，buzzerlongbeeponce（100ms）；Bluebacklitlightupfor5s.OutputcarddataCompareFPfailBuzzershortbeeptwice（50ms/time）CardorFPWaitingforFPscanningNoLEDlightupnormally.Whenuserputfingeronthescanner,FPScannerblueLEDlightupReadcardsuccessorCompareFPsuccessOrangeLEDlightup，buzzerlongbeeponce（100ms）；Bluebacklitlightupfor5s。OutputcarddataCompareFPfailBuzzershortbeeptwice
（50ms/time）CardandFPReadcardsuccessOrangeLEDlightup，buzzerlongbeeponce（100ms）WaitingforFPscanningFPScannerblueLEDlightupCompareFPsuccessOrangeLEDlightup，buzzerlongbeeponce（100ms）；Bluebacklitlightupfor5s。OutputcarddataCompareFPfailBuzzershortbeeptwice（50ms/time）

Navigation menu