Smarfid Security Equipment FSLE8 Fingerprint Series Reader User Manual
Shanghai Smarfid Security Equipment Co, Ltd. Fingerprint Series Reader
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2571518 |
| Application ID | 1G0RMqS2R8ha7alCDNMYnw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 95.6kB (1195022 bits) |
| Date Submitted | 2015-03-31 00:00:00 |
| Date Available | 2015-03-31 00:00:00 |
| Creation Date | 2017-10-09 19:10:30 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-10-09 19:10:30 |
| Document Title | Microsoft Word - user manual |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | baclks38 |
Number pad d Fingerprint Standard Fin ngerprint High Securiity Fingerprin nt Rea ader Networrk Versio on Standalone Vers sion Can use Configuration n Card to cha ange Enable usa age of a Fu unction Card d to Fingerprin nt Scanner to o Enrollment Device perform offline enrollme ent Fin nger Templa ate Storage Store in Fingerprint Sccanner Store in Miffare Card Fin ngerprint Ca apacity Support 2,000 users, Based on th he card capa acity of the maximum 4,000 templlates Access Con ntrol System Fin nger Templa ate Use softw ware to upload d and downlo oad No synchronization requ uired Da ata Synchro onization via RS485 Ac ccess Mode Card Onlyy; Fingerprintt Only; En nrollment Card Only; Fingerprint + Card Fingerprin nt + Card; Fin ngerprint or Card Friendly Installattion “Touch” number pad does no ot Universal back plate alllows g parts, which carryy any moving the reader be installed on impliies more durrable. ze of gang bo ox. different siz Meta al back plate allows the All input an nd output signals are reader install on metal surfacce and back-to backk without d range. affeccting the read protected against staticc charges. Revers se power pro otection. All inpu uts are 12Vdcc protecte ed. FCC Caution. § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Model Number: MW 8 N2 N3 – 8 X3 RF Technologies Reader Appearance and Function N1 N2 X1X2 MW = Mifare Technology 8 = Fingerprint Reader ; A = Standard Cover with Black Belt; B = Standard Cover with Sliver Belt N3 2 = Read UID / Card Number; 3 = Reader Sector N4 3 = Terminal (Default) ; 8 = Pigtail X3 N = No Number pad; K = Number pad Model Functions Standard Fingerprint Reader Keypad Fingerprint Reader Configurable Functions Re-configure Window 5 seconds (Default) or Half an hour after Power up Reader Output Format CSN/UID 32bits, 34bits, 56bits (backward/forward), file content reading for programmed ID Wiegand Pulse Width Different choices to fit with different Controller’s requirements Keypad Output Buzzer Control LED/Back lit Control N/A Definable Reader & Controller control (Default) or Controller control only Define different LED color response base on Green LED cable input Technical Specifications 3 – 5 cm Typical Read range Wiegand (RS232 & RS485 optional) Reader Standard Output Standard Keypad output Wiring Distance Fingerprint Scanner Fingerprint Capacity Template Size Fingerprint Parameter Access Mode Template Synchronization N/A Wiegand with 4 bits burst 150m (22 AWG with shielded cable) Optical 4,000 templates，each user can enroll 2 fingerprints (Network Version) Based on the card capacity (Standalone Version) 193 Bytes Verification Time: 1 s / 1000 fingerprints stored，FRR≤0.001%，FAR≤1% Network and Standalone Version: Card Only，Fingerprint + Card Network Version Only: Fingerprint or Card，Fingerprint Only Use software to upload and download via RS485 (Network Version) Templates store inside card (Standalone Version) Operating Specification: Operating Voltage 10 - 15VDC Operating Current 250mA (max) Operating Temperature Exterior dimension Case material Standard Color Operating Humidity Weight -20℃-60℃ 186 L * 85 W * 22 H (RFID Reader) / 31.5 H (Fingerprint Scanner) mm PC+ABS Black and White 20% - 85% 330g Fingerprint Reader Installation and Operation Manual Fingerprint Reader Package Network Mode 1. Fingerprint Reader X 1 Max. supported 2000 user, 2 FP template for 1 user. 2. Stainless Steel screw M4 X 25 X 2 Configure Enrollment mode Configure access mode Supported Mifare, 125khz Prox and EM technologies. Supported Mifare configuration card: Specification 1. Operating Voltage V :5~16V DC 2. Operating Current (Normal) mA : ≤150 3. Read Range cm : >6cm decreased to normal reader enroll device。 Card + FP Card only FP only Card or FP; Card Format Operating Current (Card Present) mA : ≤150 Read Content When the fingerprint (FP) scanner is working, the read range will Configure device to be enrollment or normal reader Changed access mode. >5cm 。 4. Wiegand transfer distance m : >150 5. Operating Temperature ℃ 6. Operating Humidity % : 20‐85 : ‐20‐60 Mounting Connected all necessary wire correctly，mount metal plate (Fig.1) onto gang box using two Stainless Steel screw. After that, mount the FP reader onto the metal plate. (Fig.2) Fig. 1 Fig. 2 Wiring COM_485B 485B Output to PC Network Mode SPK_IN Speaker Input RLED_IN Red LED Input GLED_IN Green LED Input N/A D_BELL Door Bell Output TAMPER Tamper Output System Connection Map Operation +12V +12V Prepare Items GND 0V FP Enrollment Software D0/R_485A Weigand D0/RS232/485A Output 1 pc of Enrollment Device D1/R_485B Weigand D1/RS232/485B Output 1 or more than 1 pc of FP reader COM_485A 485A Output to PC User Card RS485 to USB Convertor Network Mode 1. Collect user FP (2 Fingerprint templates) and user card details to FP Enrollment Software Data Base via Enrollment device. 2. Download the user data from software to device. FP Software 3. Download the user information from main interface of FP software to FP reader. 1. Enroll the user information via “User Management” interface of Enrollment Software. “Query Device”: Check the online status of every device. b) Tick all users which will be downloaded, click “Download/Delete”. User information will be a) “Read Card”: Present card to get the card information; or enter direct b) “Enroll FP”: Put user finger on scanner to collect FP template; each user should enroll 2 downloaded into device. different FP templates c) Right click reader manual under “device management”. Click “Format” to clear all user c) Fill‐in and save necessary information eg. user name. information which store inside on that device. Status Enroll Card Success or Enroll FP Success Orange LED light up，buzzer long beep once 100ms Blue backlit light up for 5s。 Waiting for FP Scan FP Scanner blue LED light up Status Downloading / deleting or formatting FP reader Backlit will light and off in 1s continuously Light 500ms off 500ms Card Reading FP reader able to set either of 4 types of access mode. They are Card only Card + FP Card only Read card success FP only Waiting for FP scanning FP only Card or FP. Card Only: Present card to get card data > output card data to controller Card + FP Present card to get card data > compare the card data and the data which Compare FP success store inside the FP reader and find out the corresponding user ID > scan FP and compare the corresponding FP template > If success, output card data to controller FP only FP scanner will always get ready to scan. Scan FP and compare all FP Compare FP fail template which store inside device > If success, get the corresponding user ID and data > output card data to controller Card or FP Card or FP Orange LED light up，buzzer long beep once 100ms Blue backlit light up for 5s. Output card data No LED light up normally. When user put finger on the scanner, FP Scanner blue LED light up Orange LED light up，buzzer long beep once 100ms Blue backlit light up for 5s. Output card data Buzzer short beep twice 50ms/time Waiting for FP scanning No LED light up normally. When user put finger on the scanner, FP Scanner blue LED light up Read card success or Compare FP success Orange LED light up，buzzer long beep once 100ms Blue backlit light up for 5s。 Please refer to “Card Only” and “FP Only” Compare FP fail Output card data Buzzer short beep twice 50ms/time Card and FP Read card success Orange LED light up，buzzer long beep once 100ms Waiting for FP scanning Compare FP success FP Scanner blue LED light up Compare FP fail Orange LED light up，buzzer long beep once 100ms Blue backlit light up for 5s。 Output card data Buzzer short beep 50ms/time twice
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : baclks38 Create Date : 2015:03:18 09:49:17+08:00 Modify Date : 2015:03:31 17:51:01-07:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Creator : baclks38 Title : Microsoft Word - user manual Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2015:03:31 17:51:01-07:00 Producer : Acrobat Distiller 9.0.0 (Windows) Document ID : uuid:4cf78359-ec18-4ed7-8d6c-c24608fd557e Instance ID : uuid:7548567a-8b22-4858-8184-7c37176c2936 Page Count : 9EXIF Metadata provided by EXIF.tools